Screen and System freeze
I have installed Adobe Photoshop Elements and Premiere Elements 12 (bundled software) and since the screen freezes even if those newly installed apps ar not running.
The screen freeze is happening when "Screen Saver" is running. I am on OS X 10.9.3.
Only on one occasion could I recover with "Mission Control" by selecting another Desktop (this was when premiere Elements was running) and close down Premiere Elements 12.
Any ideas out there?
Hi all (ATR, Sam and Steve - note alphabetical order),
looks like I hit a wasps nest? The intention was not to start a fight. Following are some clarifying points (sorry I did not do this before):
I am running on Mac Pro 8 GB RAM plenty of storage and 2x 2.8 GHz Quad-Cofre Intel Xeon.
Installed is 64 bit Premiere Elements and Photoshop Elements 12 Bundle. So there is no (or very unlikely) a resource problem.
I was on Adobe Photoshop Elements 11 before (but did not have Premiere) and had no problems.
To have to shut down the screen saver to overcome the problem sounds counter productive.
A screen/system freeze should not happen:
1. OS X 10.9.3 (the OS I'm running should not let it happen and rather throw out -abort- the culprit).
2. Adobe Premiere Elements 12 -if it is the cause and it looks like it is since it only happens since installing the Adobe software- should not mess around in the OS software.
Be that as is - it does happen.
It would be nice if we could have an open minded discussion about this and in fact Adobe should take part in it because they are the people making money on the sales.
After all, Adobe charges Australian users nearly twice the money for their software as compared to the US.
I'm looking forward to your replies.
sigipc
Similar Messages
-
Satellite A60-102 - Blue screen error appears on screen and system restart
Sometime Blue screen error showing on screen and system restart
how can solve this problemHi
What BSOD code you get exactly?
Which OS you are using?
Maybe its a driver problem. Have you checked the device manager for yellow exclamation marks?
Can you boot in safe mode? -
Screen Grays,System Freezes, Requires Restart.
During "Finalize Project" Screen Grays,System Freezes, Requires Restart. What's up.
Run Disk Utility. The startup disk may need repairing.
Using Disk Utility to verify or repair disks -
Ipod screen and controls freeze for 1 min but it still plays
Hello, any and all help is appreciated.
Listening to music, my ipod's screen and controls will freeze for about a minute, but the ipod still plays music when this happens. It happens every 5 minutes or so. Pretty weird. If I turn on the backlight and it freezes, the backlight will stay on for 1 minute until the thing unfreezes and it kills battery time.
Also, it will remember any buttons that I press while it is in freeze mode and when it unfreezes, it will perform those functions. (i.e. if i'm listening to a song and the screen and controls freeze, it will continue to play that song. if i use the click wheel to change the volume, it won't work, but as soon as it unfreezes, the ipod will remember my actions and lower the volume eventhough i tried to adjust it 30 seconds ago. make sense?)
Has this happened to anybody else? Is there anything I can do?Place the iOS device in Recovery Mode and then connect to your computer and restore to factory settings/new iPod via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
Then try to recover the information from the iPod
via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official -
Screen flickering and system freezes when using Nouveau driver.
I'm testing the Nouveau driver on my computer, I really want to keep this driver installed because it makes XFCE to use less resources than the Nvidia proprietary driver. But when I start some apps like firefox or make changes to the desktop, the system stop responding and then the screen breaks.
I can't use the computer in that state so I force a shutdown.
I don't know how to see what is going wrong, because the proprietary driver don't give me these problems, I don't get any errors at dmesg log and Xorg log don't have any helpful information.
dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.3-2-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057feffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000057ff0000-0x0000000057ff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000057ff3000-0x0000000057ffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000058000000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Acer Aspire T180/EM61SM/EM61PM , BIOS R01-B4 06/15/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x57ff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f3c90-0x000f3c9f] mapped at [c00f3c90]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
[ 0.000000] RAMDISK: [mem 0x37a46000-0x37d1afff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37529000-0x377fd69f]
[ 0.000000] Move RAMDISK from [mem 0x37a46000-0x37d1a69f] to [mem 0x37529000-0x377fd69f]
[ 0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS)
[ 0.000000] ACPI: RSDT 57ff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 57ff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 57ff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 57ff0000 00040
[ 0.000000] ACPI: SSDT 57ff95c0 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 57ff9800 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
[ 0.000000] ACPI: SLIC 57ff9880 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001)
[ 0.000000] ACPI: MCFG 57ff9a40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 57ff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 519MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x57feffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x57feffff]
[ 0.000000] On node 0 totalpages: 360319
[ 0.000000] free_area_init_node: node 0, pgdat c15ab3c0, node_mem_map f6a28200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1040 pages used for memmap
[ 0.000000] HighMem zone: 132066 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x60000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6a05000 s32640 r0 d20608 u53248
[ 0.000000] pcpu-alloc: s32640 r0 d20608 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357503
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2883328 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00057ff0)
[ 0.000000] Memory: 1415956k/1441728k available (4184k kernel code, 25320k reserved, 1679k data, 560k init, 532424k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc15ba000 - 0xc1646000 ( 560 kB)
.data : 0xc141613e - 0xc15b9d80 (1679 kB)
.text : 0xc1000000 - 0xc141613e (4184 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1908.551 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3818.14 BogoMIPS (lpj=6361836)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003404] Security Framework initialized
[ 0.003415] AppArmor: AppArmor disabled by boot time parameter
[ 0.003432] Mount-cache hash table entries: 512
[ 0.006819] Initializing cgroup subsys cpuacct
[ 0.006822] Initializing cgroup subsys memory
[ 0.006834] Initializing cgroup subsys devices
[ 0.006837] Initializing cgroup subsys freezer
[ 0.006840] Initializing cgroup subsys net_cls
[ 0.006842] Initializing cgroup subsys blkio
[ 0.006879] CPU: Physical Processor ID: 0
[ 0.006882] CPU: Processor Core ID: 0
[ 0.006885] mce: CPU supports 5 MCE banks
[ 0.006896] LVT offset 0 assigned for vector 0xf9
[ 0.006902] process: using AMD E400 aware idle routine
[ 0.006911] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[ 0.007021] Freeing SMP alternatives: 16k freed
[ 0.007977] ACPI: Core revision 20121018
[ 0.015366] ftrace: allocating 18273 entries in 36 pages
[ 0.023490] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059250] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (fam: 0f, model: 6b, stepping: 01)
[ 0.059999] Performance Events: AMD PMU driver.
[ 0.059999] ... version: 0
[ 0.059999] ... bit width: 48
[ 0.059999] ... generic registers: 4
[ 0.059999] ... value mask: 0000ffffffffffff
[ 0.059999] ... max period: 00007fffffffffff
[ 0.059999] ... fixed-purpose events: 0
[ 0.059999] ... event mask: 000000000000000f
[ 0.078439] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083409] CPU 1 irqstacks, hard=f60ba000 soft=f60bc000
[ 0.083412] smpboot: Booting Node 0, Processors #1 OK
[ 0.006666] Initializing CPU#1
[ 0.176732] Brought up 2 CPUs
[ 0.176736] smpboot: Total of 2 processors activated (7637.24 BogoMIPS)
[ 0.177423] devtmpfs: initialized
[ 0.177423] PM: Registering ACPI NVS region [mem 0x57ff0000-0x57ff2fff] (12288 bytes)
[ 0.178162] RTC time: 21:06:38, date: 03/21/13
[ 0.178225] NET: Registered protocol family 16
[ 0.178397] node 0 link 0: io port [8000, ffff]
[ 0.178401] TOM: 0000000060000000 aka 1536M
[ 0.178404] node 0 link 0: mmio [a0000, bffff]
[ 0.178408] node 0 link 0: mmio [60000000, efffffff]
[ 0.178411] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.178414] node 0 link 0: mmio [f0000000, f03fffff]
[ 0.178418] bus: [bus 00-04] on node 0 link 0
[ 0.178421] bus: 00 [io 0x0000-0xffff]
[ 0.178423] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.178425] bus: 00 [mem 0x60000000-0xf3ffffff]
[ 0.178428] bus: 00 [mem 0xf4000000-0xffffffff]
[ 0.178495] ACPI: bus type pci registered
[ 0.178575] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.178579] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.178581] PCI: Using MMCONFIG for extended config space
[ 0.178583] PCI: Using configuration type 1 for base access
[ 0.178677] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.178679] mtrr: probably your BIOS does not setup all CPUs.
[ 0.178681] mtrr: corrected configuration.
[ 0.180670] bio: create slab <bio-0> at 0
[ 0.180670] ACPI: Added _OSI(Module Device)
[ 0.180670] ACPI: Added _OSI(Processor Device)
[ 0.180670] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.180670] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.181260] ACPI: EC: Look up EC in DSDT
[ 0.186070] ACPI: Interpreter enabled
[ 0.186077] ACPI: (supports S0 S3 S4 S5)
[ 0.186098] ACPI: Using IOAPIC for interrupt routing
[ 0.193127] ACPI: No dock devices found.
[ 0.193134] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.193752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[ 0.193756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.193890] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.193894] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.195031] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.195034] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
[ 0.195037] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored)
[ 0.195040] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
[ 0.195044] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.195047] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
[ 0.195050] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
[ 0.195053] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.195057] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470b] (ignored)
[ 0.195060] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored)
[ 0.195063] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
[ 0.195066] PCI: root bus 00: hardware-probed resources
[ 0.195117] PCI host bridge to bus 0000:00
[ 0.195121] pci_bus 0000:00: root bus resource [bus 00-04]
[ 0.195124] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.195127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.195130] pci_bus 0000:00: root bus resource [mem 0x60000000-0xf3ffffff]
[ 0.195134] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
[ 0.195161] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[ 0.195341] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[ 0.195384] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.195397] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
[ 0.195414] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.195421] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
[ 0.195452] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.195469] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.195516] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.195527] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.195564] pci 0000:00:02.0: supports D1 D2
[ 0.195567] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.195583] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.195595] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.195639] pci 0000:00:02.1: supports D1 D2
[ 0.195642] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.195665] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.195711] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.195723] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
[ 0.195768] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.195791] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 0.195814] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 0.195850] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 0.195860] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
[ 0.195866] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.195872] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
[ 0.195877] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.195883] pci 0000:00:08.0: reg 20: [io 0xdc00-0xdc0f]
[ 0.195889] pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[ 0.195922] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[ 0.195932] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
[ 0.195938] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
[ 0.195944] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
[ 0.195949] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
[ 0.195955] pci 0000:00:08.1: reg 20: [io 0xc800-0xc80f]
[ 0.195961] pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.196000] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 0.196032] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196051] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 0.196081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196098] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 0.196128] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196146] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
[ 0.196154] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.196162] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.196169] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.196177] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.196209] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.196233] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.196253] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.196273] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.196335] pci 0000:01:09.0: [104c:8024] type 00 class 0x0c0010
[ 0.196350] pci 0000:01:09.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.196359] pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
[ 0.196412] pci 0000:01:09.0: supports D1 D2
[ 0.196415] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.196444] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.196448] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.196452] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.196456] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
[ 0.196459] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.196462] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.196465] pci 0000:00:04.0: bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
[ 0.196469] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[ 0.196493] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.196498] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.196501] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.196506] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.196548] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
[ 0.196565] pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.196575] pci 0000:03:00.0: reg 18: [io 0x9c00-0x9cff]
[ 0.196604] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.196648] pci 0000:03:00.0: supports D1 D2
[ 0.196651] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.203353] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.203357] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.203361] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.203365] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.203390] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.203394] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.203398] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.203402] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.203413] pci_bus 0000:00: on NUMA node 0
[ 0.203424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.203569] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.242482] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242536] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242587] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242639] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
[ 0.242689] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242741] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 0.242791] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242842] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242894] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
[ 0.242944] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242996] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 0.243045] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243098] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.243148] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243204] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 0.243265] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 0.243315] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243375] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 0.243432] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 0.243524] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.243606] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.243688] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.243770] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.243851] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.243933] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.244014] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.244095] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.244176] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.244258] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.244340] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 0.244422] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.244504] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.244586] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.244669] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.244751] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.244833] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.244921] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.245004] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.245086] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.245086] vgaarb: loaded
[ 0.245086] vgaarb: bridge control possible 0000:00:0d.0
[ 0.245086] PCI: Using ACPI for IRQ routing
[ 0.246696] PCI: pci_cache_line_size set to 64 bytes
[ 0.246745] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.246748] e820: reserve RAM buffer [mem 0x57ff0000-0x57ffffff]
[ 0.246902] NetLabel: Initializing
[ 0.246904] NetLabel: domain hash size = 128
[ 0.246906] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.246923] NetLabel: unlabeled traffic allowed by default
[ 0.246950] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.246956] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.246961] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.256702] Switching to clocksource hpet
[ 0.264319] pnp: PnP ACPI init
[ 0.264346] ACPI: bus type pnp registered
[ 0.264605] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.264609] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 0.264613] system 00:00: [io 0x1400-0x147f] has been reserved
[ 0.264616] system 00:00: [io 0x1480-0x14ff] has been reserved
[ 0.264620] system 00:00: [io 0x1800-0x187f] has been reserved
[ 0.264623] system 00:00: [io 0x1880-0x18ff] has been reserved
[ 0.264628] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.264631] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
[ 0.264635] system 00:00: [mem 0x58000000-0x5fffffff] has been reserved
[ 0.264641] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265431] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.265434] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.265438] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.265442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265458] pnp 00:02: [dma 4]
[ 0.265495] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.265606] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.265670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265714] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.265772] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.266190] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.266522] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.266948] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.267129] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.267201] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.267285] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.267290] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267506] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.267510] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.267514] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.267517] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.267521] system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
[ 0.267525] system 00:0d: [mem 0x57ff0000-0x57ffffff] could not be reserved
[ 0.267528] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.267532] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.267535] system 00:0d: [mem 0x00100000-0x57feffff] could not be reserved
[ 0.267539] system 00:0d: [mem 0x58000000-0x5fffffff] has been reserved
[ 0.267543] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.267546] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.267550] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.267554] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.267557] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.267561] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.267565] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.267589] pnp: PnP ACPI: found 14 devices
[ 0.267590] ACPI: ACPI bus type pnp unregistered
[ 0.305593] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[ 0.305599] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.305603] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.305608] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.305612] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
[ 0.305617] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.305621] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.305625] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.305629] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.305635] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
[ 0.305638] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.305641] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.305645] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.305649] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.305654] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.305657] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.305661] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.305665] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.305677] pci 0000:00:04.0: setting latency timer to 64
[ 0.305686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.305689] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.305692] pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
[ 0.305696] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.305699] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.305702] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.305706] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref]
[ 0.305709] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.305712] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.305715] pci_bus 0000:01: resource 6 [mem 0x60000000-0xf3ffffff]
[ 0.305718] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.305722] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.305725] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.305729] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.305732] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 0.305735] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.305738] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.305742] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
[ 0.305745] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.305748] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.305804] NET: Registered protocol family 2
[ 0.305997] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.306061] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.306122] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.306184] TCP: reno registered
[ 0.306188] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.306204] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.306279] NET: Registered protocol family 1
[ 0.306537] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.370181] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.370249] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370299] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370357] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370411] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370469] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370531] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370598] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370606] pci 0000:00:0d.0: Boot video device
[ 0.370621] PCI: CLS 64 bytes, default 64
[ 0.370687] Unpacking initramfs...
[ 0.455995] Freeing initrd memory: 2900k freed
[ 0.459106] apm: BIOS not found.
[ 0.459448] audit: initializing netlink socket (disabled)
[ 0.459468] type=2000 audit(1363899998.456:1): initialized
[ 0.474029] bounce pool size: 64 pages
[ 0.474052] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.476263] VFS: Disk quotas dquot_6.5.2
[ 0.476327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.476593] msgmni has been set to 1731
[ 0.476998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.477042] io scheduler noop registered
[ 0.477044] io scheduler deadline registered
[ 0.477053] io scheduler cfq registered (default)
[ 0.477195] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.477269] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.477329] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.477469] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.477471] vesafb: scrolling: redraw
[ 0.477474] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.477558] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
[ 0.484141] Console: switching to colour frame buffer device 80x30
[ 0.490611] fb0: VESA VGA frame buffer device
[ 0.490704] GHES: HEST is not enabled!
[ 0.490719] isapnp: Scanning for PnP cards...
[ 0.802592] isapnp: No Plug & Play device found
[ 0.802671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.823231] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.843779] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.844469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.844915] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.844951] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.845087] mousedev: PS/2 mouse device common for all mice
[ 0.845182] rtc_cmos 00:04: RTC can wake from S4
[ 0.845358] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.845400] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.845435] cpuidle: using governor ladder
[ 0.845437] cpuidle: using governor menu
[ 0.845439] EFI Variables Facility v0.08 2004-May-17
[ 0.845489] drop_monitor: Initializing network drop monitor service
[ 0.845593] TCP: cubic registered
[ 0.845736] NET: Registered protocol family 10
[ 0.845940] NET: Registered protocol family 17
[ 0.845958] Key type dns_resolver registered
[ 0.846129] Using IPI No-Shortcut mode
[ 0.846264] PM: Hibernation image not present or could not be loaded.
[ 0.846279] registered taskstats version 1
[ 0.846851] Magic number: 5:851:146
[ 0.846912] acpi device:17: hash matches
[ 0.846972] rtc_cmos 00:04: setting system clock to 2013-03-21 21:06:39 UTC (1363899999)
[ 0.847246] Freeing unused kernel memory: 560k freed
[ 0.847645] Write protecting the kernel text: 4188k
[ 0.847679] Write protecting the kernel read-only data: 1284k
[ 0.858078] systemd-udevd[45]: starting version 198
[ 0.864682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.904637] ACPI: bus type usb registered
[ 0.904681] usbcore: registered new interface driver usbfs
[ 0.904697] usbcore: registered new interface driver hub
[ 0.904815] usbcore: registered new device driver usb
[ 0.906826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.908458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.908536] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.908541] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.908550] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 0.908594] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 0.910252] ehci-pci: EHCI PCI platform driver
[ 0.910290] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 0.910329] firewire_ohci 0000:01:09.0: setting latency timer to 64
[ 0.912040] SCSI subsystem initialized
[ 0.915768] ACPI: bus type scsi registered
[ 0.918637] libata version 3.00 loaded.
[ 0.962268] hub 1-0:1.0: USB hub found
[ 0.962279] hub 1-0:1.0: 10 ports detected
[ 0.962535] ehci-pci 0000:00:02.1: setting latency timer to 64
[ 0.962539] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.962547] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 0.962559] ehci-pci 0000:00:02.1: debug port 1
[ 0.962589] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 0.962617] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 0.970035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.970261] hub 2-0:1.0: USB hub found
[ 0.970268] hub 2-0:1.0: 10 ports detected
[ 0.970681] pata_amd 0000:00:06.0: version 0.4.1
[ 0.970736] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.971618] scsi0 : pata_amd
[ 0.972200] scsi1 : pata_amd
[ 0.972449] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.972452] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.972517] sata_nv 0000:00:08.0: version 3.5
[ 0.972721] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 0.972802] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.973161] scsi2 : sata_nv
[ 0.973470] scsi3 : sata_nv
[ 0.973598] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
[ 0.973602] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
[ 0.973822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 0.973886] sata_nv 0000:00:08.1: setting latency timer to 64
[ 0.974209] scsi4 : sata_nv
[ 0.974369] scsi5 : sata_nv
[ 0.974488] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
[ 0.974491] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
[ 1.130346] ata1.00: ATAPI: HL-DT-ST DVDRAM_GSA-H40N, RA00, max UDMA/66
[ 1.130357] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
[ 1.143604] ata1.00: configured for UDMA/66
[ 1.149515] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H40N RA00 PQ: 0 ANSI: 5
[ 1.149876] ata2: port disabled--ignoring
[ 1.297028] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.297032] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.633688] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.643352] firewire_ohci 0000:01:09.0: failed to read phy reg
[ 1.643576] firewire_ohci: probe of 0000:01:09.0 failed with error -16
[ 1.730033] usb 1-4: new low-speed USB device number 2 using ohci_hcd
[ 1.936808] usbcore: registered new interface driver usbhid
[ 1.936814] usbhid: USB HID core driver
[ 2.100049] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.107021] ata6.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133
[ 2.107025] ata6.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.120325] ata6.00: configured for UDMA/133
[ 2.120524] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 2.125055] sd 5:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
[ 2.125119] sd 5:0:0:0: [sda] Write Protect is off
[ 2.125123] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.125149] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.131113] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.131120] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.131457] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.146217] sda: sda1 sda2 sda3
[ 2.146831] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.206694] usb 1-8: new full-speed USB device number 3 using ohci_hcd
[ 2.407819] Initializing USB Mass Storage driver...
[ 2.408184] scsi6 : usb-storage 1-8:1.0
[ 2.408335] usbcore: registered new interface driver usb-storage
[ 2.408337] USB Mass Storage support registered.
[ 2.542664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.014632] systemd[1]: Smack is not enabled in the kernel, not loading access rules.
[ 3.097131] systemd[1]: systemd 198 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.097800] systemd[1]: Set hostname to <acer-aspire>.
[ 3.352860] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.352959] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.352983] systemd[1]: Expecting device sys-subsystem-net-devices-enp3s0.device...
[ 3.353005] systemd[1]: Starting Remote File Systems.
[ 3.353024] systemd[1]: Reached target Remote File Systems.
[ 3.353041] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.353091] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.353108] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.353156] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.353173] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.353206] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.353222] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.353253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.353274] systemd[1]: Starting Journal Socket.
[ 3.353366] systemd[1]: Listening on Journal Socket.
[ 3.354821] systemd[1]: Starting Apply Kernel Variables...
[ 3.357143] systemd[1]: Mounting Huge Pages File System...
[ 3.363518] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.370154] systemd[1]: Mounting Debug File System...
[ 3.385832] systemd[1]: Starting Journal Service...
[ 3.393610] systemd[1]: Started Journal Service.
[ 3.393800] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.393975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.407359] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.407389] systemd[1]: Starting Encrypted Volumes.
[ 3.407409] systemd[1]: Reached target Encrypted Volumes.
[ 3.407431] systemd[1]: Starting Setup Virtual Console...
[ 3.410492] systemd[1]: Starting udev Kernel Socket.
[ 3.410553] systemd[1]: Listening on udev Kernel Socket.
[ 3.410641] systemd[1]: Starting udev Control Socket.
[ 3.410689] systemd[1]: Listening on udev Control Socket.
[ 3.410760] systemd[1]: Starting udev Coldplug all Devices...
[ 3.417037] systemd[1]: Starting udev Kernel Device Manager...
[ 3.418761] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.436758] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.441505] systemd[1]: Started Load Kernel Modules.
[ 3.441546] systemd[1]: Mounted FUSE Control File System.
[ 3.441570] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.441652] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.441693] systemd[1]: Mounting Configuration File System...
[ 3.465751] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.476732] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.505747] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.516728] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.549724] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 3.553823] systemd[1]: Expecting device dev-disk-by\x2duuid-bb5a3cc3\x2d55fd\x2d4830\x2d8177\x2ddd32df9bd303.device...
[ 3.553856] systemd[1]: Mounting Temporary Directory...
[ 3.571730] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 3.744908] systemd-udevd[126]: starting version 198
[ 3.777101] systemd[1]: Started File System Check on Root Device.
[ 3.777142] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.790819] systemd[1]: Started udev Kernel Device Manager.
[ 3.800185] systemd[1]: Started Apply Kernel Variables.
[ 4.118718] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 4.205364] systemd-journald[122]: Received SIGUSR1
[ 5.423026] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.423033] ACPI: Thermal Zone [THRM] (40 C)
[ 5.463049] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 5.484558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 5.484570] ACPI: Power Button [PWRB]
[ 5.484693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.484697] ACPI: Power Button [PWRF]
[ 5.491085] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 5.542488] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 5.542524] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[ 5.547898] Linux agpgart interface v0.103
[ 5.558914] ACPI: Fan [FAN] (on)
[ 5.559089] [drm] Initialized drm 1.1.0 20060810
[ 5.565468] microcode: AMD CPU family 0xf not supported
[ 5.567533] microcode: AMD CPU family 0xf not supported
[ 5.642735] wmi: Mapper loaded
[ 5.645076] kvm: Nested Virtualization enabled
[ 5.649689] powernow-k8: fid 0xb (1900 MHz), vid 0xc
[ 5.649696] powernow-k8: fid 0xa (1800 MHz), vid 0xd
[ 5.649699] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 5.649987] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
[ 5.685561] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[ 5.685568] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 5.685594] Console: switching to colour dummy device 80x25
[ 5.685773] nouveau 0000:00:0d.0: setting latency timer to 64
[ 5.686326] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 5.686707] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
[ 5.686715] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
[ 5.686722] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
[ 5.687642] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
[ 5.733281] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
[ 5.733287] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
[ 5.733560] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
[ 5.733565] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.25.04
[ 5.733746] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
[ 5.733749] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB
[ 5.733752] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
[ 5.761373] [TTM] Zone kernel: Available graphics memory: 443504 kiB
[ 5.761379] [TTM] Zone highmem: Available graphics memory: 709716 kiB
[ 5.761381] [TTM] Initializing pool allocator
[ 5.761831] nouveau [ DRM] VRAM: 125 MiB
[ 5.761838] nouveau [ DRM] GART: 512 MiB
[ 5.761844] nouveau [ DRM] BIT BIOS found
[ 5.761848] nouveau [ DRM] Bios version 05.61.32.25
[ 5.761852] nouveau [ DRM] TMDS table version 1.1
[ 5.761855] nouveau [ DRM] DCB version 3.0
[ 5.761859] nouveau [ DRM] DCB outp 00: 01000310 00000023
[ 5.761863] nouveau [ DRM] DCB outp 01: 00110204 98830003
[ 5.761865] nouveau [ DRM] DCB conn 00: 0000
[ 5.761869] nouveau [ DRM] DCB conn 01: 1131
[ 5.761872] nouveau [ DRM] DCB conn 02: 0110
[ 5.761875] nouveau [ DRM] DCB conn 03: 0111
[ 5.761877] nouveau [ DRM] DCB conn 04: 0113
[ 5.762420] nouveau W[ DRM] DCB type 4 not known
[ 5.762425] nouveau W[ DRM] Unknown-1 has no encoders, removing
[ 5.763281] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.763283] [drm] No driver support for vblank timestamp query.
[ 5.763931] nouveau [ DRM] 1 available performance level(s)
[ 5.763937] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
[ 5.763939] nouveau [ DRM] c:
[ 5.765435] nouveau [ DRM] MM: using M2MF for buffer copies
[ 5.811870] sky2: driver version 1.30
[ 5.812122] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 5.812188] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
[ 5.812268] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
[ 5.812560] sky2 0000:03:00.0 eth0: addr 00:19:21:28:95:2d
[ 5.814804] composite sync not supported
[ 5.815267] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo f63fa000
[ 5.815425] fbcon: nouveaufb (fb0) is primary device
[ 5.829143] IT8726 SuperIO detected.
[ 5.829405] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.829453] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.856121] ppdev: user-space parallel port driver
[ 5.877128] Console: switching to colour frame buffer device 180x56
[ 5.878923] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[ 5.878929] nouveau 0000:00:0d.0: registered panic notifier
[ 5.878952] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
[ 5.879707] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 5.879730] hda_intel: Disabling MSI
[ 5.879786] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[ 6.023710] systemd-udevd[151]: renamed network interface eth0 to enp3s0
[ 6.497697] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input4
[ 6.498447] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[ 6.533068] Adding 997756k swap on /dev/sda3. Priority:-1 extents:1 across:997756k
[ 6.633135] sky2 0000:03:00.0 enp3s0: enabling interface
[ 6.633209] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.846889] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 7.603865] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[ 7.604089] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[ 7.604265] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[ 7.604442] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[ 7.604616] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[ 7.604791] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[ 7.604969] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[ 7.605141] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
[ 8.208529] composite sync not supported
[ 8.244451] composite sync not supported
[ 8.450333] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both
[ 8.450367] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 20.811802] composite sync not supported
[ 23.142014] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
[ 84.047784] usb 1-4: USB disconnect, device number 2
[ 85.606696] usb 1-4: new low-speed USB device number 4 using ohci_hcd
[ 85.814008] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input14
[ 85.814445] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[ 389.250323] composite sync not supported
Xorg log:
[ 7.949]
X.Org X Server 1.14.0
Release Date: 2013-03-05
[ 7.949] X Protocol Version 11, Revision 0
[ 7.949] Build Operating System: Linux 3.8.2-1-ARCH i686
[ 7.949] Current Operating System: Linux acer-aspire 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
[ 7.949] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[ 7.949] Build Date: 09 March 2013 11:46:22AM
[ 7.949]
[ 7.949] Current version of pixman: 0.28.2
[ 7.949] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.949] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.949] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 21 15:06:46 2013
[ 7.988] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 8.001] (==) No Layout section. Using the first Screen section.
[ 8.001] (==) No screen section available. Using defaults.
[ 8.001] (**) |-->Screen "Default Screen Section" (0)
[ 8.001] (**) | |-->Monitor "<default monitor>"
[ 8.011] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.011] (==) Automatically adding devices
[ 8.011] (==) Automatically enabling devices
[ 8.011] (==) Automatically adding GPU devices
[ 8.060] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.060] Entry deleted from font path.
[ 8.060] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 8.060] Entry deleted from font path.
[ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 8.060] Entry deleted from font path.
[ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 8.060] Entry deleted from font path.
[ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 8.060] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 8.060] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.060] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.069] (II) Loader magic: 0x825b620
[ 8.069] (II) Module ABI versions:
[ 8.069] X.Org ANSI C Emulation: 0.4
[ 8.069] X.Org Video Driver: 14.1
[ 8.069] X.Org XInput driver : 19.1
[ 8.069] X.Org Server Extension : 7.0
[ 8.069] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 8.072] (--) PCI:*(0:0:13:0) 10de:03d0:1019:2601 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 8.073] Initializing built-in extension Generic Event Extension
[ 8.073] Initializing built-in extension SHAPE
[ 8.073] Initializing built-in extension MIT-SHM
[ 8.073] Initializing built-in extension XInputExtension
[ 8.073] Initializing built-in extension XTEST
[ 8.073] Initializing built-in extension BIG-REQUESTS
[ 8.073] Initializing built-in extension SYNC
[ 8.073] Initializing built-in extension XKEYBOARD
[ 8.073] Initializing built-in extension XC-MISC
[ 8.073] Initializing built-in extension SECURITY
[ 8.073] Initializing built-in extension XINERAMA
[ 8.073] Initializing built-in extension XFIXES
[ 8.073] Initializing built-in extension RENDER
[ 8.073] Initializing built-in extension RANDR
[ 8.073] Initializing built-in extension COMPOSITE
[ 8.073] Initializing built-in extension DAMAGE
[ 8.073] Initializing built-in extension MIT-SCREEN-SAVER
[ 8.073] Initializing built-in extension DOUBLE-BUFFER
[ 8.073] Initializing built-in extension RECORD
[ 8.073] Initializing built-in extension DPMS
[ 8.073] Initializing built-in extension X-Resource
[ 8.073] Initializing built-in extension XVideo
[ 8.073] Initializing built-in extension XVideo-MotionCompensation
[ 8.073] Initializing built-in extension XFree86-VidModeExtension
[ 8.073] Initializing built-in extension XFree86-DGA
[ 8.073] Initializing built-in extension XFree86-DRI
[ 8.073] Initializing built-in extension DRI2
[ 8.073] (II) LoadModule: "glx"
[ 8.099] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.133] (II) Module glx: vendor="X.Org Foundation"
[ 8.133] compiled for 1.14.0, module version = 1.0.0
[ 8.133] ABI class: X.Org Server Extension, version 7.0
[ 8.133] (==) AIGLX enabled
[ 8.134] Loading extension GLX
[ 8.134] (==) Matched nouveau as autoconfigured driver 0
[ 8.134] (==) Matched nvidia as autoconfigured driver 1
[ 8.134] (==) Matched nv as autoconfigured driver 2
[ 8.134] (==) Matched nouveau as autoconfigured driver 3
[ 8.134] (==) Matched nvidia as autoconfigured driver 4
[ 8.134] (==) Matched nv as autoconfigured driver 5
[ 8.134] (==) Matched vesa as autoconfigured driver 6
[ 8.134] (==) Matched modesetting as autoconfigured driver 7
[ 8.134] (==) Matched fbdev as autoconfigured driver 8
[ 8.134] (==) Assigned the driver to the xf86ConfigLayout
[ 8.134] (II) LoadModule: "nouveau"
[ 8.134] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 8.154] (II) Module nouveau: vendor="X.Org Foundation"
[ 8.154] compiled for 1.14.0, module version = 1.0.6
[ 8.154] Module class: X.Org Video Driver
[ 8.154] ABI class: X.Org Video Driver, version 14.1
[ 8.154] (II) LoadModule: "nvidia"
[ 8.155] (WW) Warning, couldn't open module nvidia
[ 8.155] (II) UnloadModule: "nvidia"
[ 8.155] (II) Unloading nvidia
[ 8.155] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 8.155] (II) LoadModule: "nv"
[ 8.155] (WW) Warning, couldn't open module nv
[ 8.155] (II) UnloadModule: "nv"
[ 8.155] (II) Unloading nv
[ 8.155] (EE) Failed to load module "nv" (module does not exist, 0)
[ 8.155] (II) LoadModule: "vesa"
[ 8.156] (WW) Warning, couldn't open module vesa
[ 8.156] (II) UnloadModule: "vesa"
[ 8.156] (II) Unloading vesa
[ 8.156] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 8.156] (II) LoadModule: "modesetting"
[ 8.156] (WW) Warning, couldn't open module modesetting
[ 8.156] (II) UnloadModule: "modesetting"
[ 8.156] (II) Unloading modesetting
[ 8.157] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 8.157] (II) LoadModule: "fbdev"
[ 8.157] (WW) Warning, couldn't open module fbdev
[ 8.157] (II) UnloadModule: "fbdev"
[ 8.157] (II) Unloading fbdev
[ 8.157] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 8.157] (II) NOUVEAU driver
[ 8.157] (II) NOUVEAU driver for NVIDIA chipset families :
[ 8.157] RIVA TNT (NV04)
[ 8.157] RIVA TNT2 (NV05)
[ 8.157] GeForce 256 (NV10)
[ 8.157] GeForce 2 (NV11, NV15)
[ 8.157] GeForce 4MX (NV17, NV18)
[ 8.157] GeForce 3 (NV20)
[ 8.158] GeForce 4Ti (NV25, NV28)
[ 8.158] GeForce FX (NV3x)
[ 8.158] GeForce 6 (NV4x)
[ 8.158] GeForce 7 (G7x)
[ 8.158] GeForce 8 (G8x)
[ 8.158] GeForce GTX 200 (NVA0)
[ 8.158] GeForce GTX 400 (NVC0)
[ 8.158] (++) using VT number 7
[ 8.175] (II) [drm] nouveau interface version: 1.1.0
[ 8.175] (II) Loading sub module "dri"
[ 8.175] (II) LoadModule: "dri"
[ 8.175] (II) Module "dri" already built-in
[ 8.175] (II) NOUVEAU(0): Loaded DRI module
[ 8.175] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[ 8.175] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.175] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 8.175] (==) NOUVEAU(0): RGB weight 888
[ 8.175] (==) NOUVEAU(0): Default visual is TrueColor
[ 8.175] (==) NOUVEAU(0): Using HW cursor
[ 8.175] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 8.175] (==) NOUVEAU(0): Page flipping enabled
[ 8.175] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 8.208] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 8.244] (II) NOUVEAU(0): EDID for output VGA-1
[ 8.244] (II) NOUVEAU(0): Manufacturer: ACR Model: ada8 Serial#: 1937803344
[ 8.244] (II) NOUVEAU(0): Year: 2007 Week: 38
[ 8.244] (II) NOUVEAU(0): EDID Version: 1.3
[ 8.244] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 8.244] (II) NOUVEAU(0): Sync: Separate Composite
[ 8.244] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 8.245] (II) NOUVEAU(0): Gamma: 2.20
[ 8.245] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 8.245] (II) NOUVEAU(0): Default color space is primary color space
[ 8.245] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 8.245] (II) NOUVEAU(0): redX: 0.590 redY: 0.349 greenX: 0.328 greenY: 0.547
[ 8.245] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.138 whiteX: 0.313 whiteY: 0.329
[ 8.245] (II) NOUVEAU(0): Supported established timings:
[ 8.245] (II) NOUVEAU(0): 720x400@70Hz
[ 8.245] (II) NOUVEAU(0): 640x480@60Hz
[ 8.245] (II) NOUVEAU(0): 640x480@67Hz
[ 8.245] (II) NOUVEAU(0): 640x480@72Hz
[ 8.245] (II) NOUVEAU(0): 640x480@75Hz
[ 8.245] (II) NOUVEAU(0): 800x600@56Hz
[ 8.245] (II) NOUVEAU(0): 800x600@60Hz
[ 8.245] (II) NOUVEAU(0): 800x600@72Hz
[ 8.245] (II) NOUVEAU(0): 800x600@75Hz
[ 8.245] (II) NOUVEAU(0): 832x624@75Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@60Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@70Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@75Hz
[ 8.245] (II) NOUVEAU(0): 1152x864@75Hz
[ 8.245] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 8.245] (II) NOUVEAU(0): Supported standard timings:
[ 8.245] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 8.245] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 75 vid: 3969
[ 8.245] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 8.245] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 8.245] (II) NOUVEAU(0): Supported detailed timing:
[ 8.245] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 367 x 229 mm
[ 8.245] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 8.245] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 8.245] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 215 MHz
[ 8.245] (II) NOUVEAU(0): Monitor name: Acer AL1716W
[ 8.245] (II) NOUVEAU(0): Serial No: LA8040344303
[ 8.245] (II) NOUVEAU(0): EDID (in hex):
[ 8.245] (II) NOUVEAU(0): 00ffffffffffff000472a8ad50888073
[ 8.245] (II) NOUVEAU(0): 261101036c251778ee10d59759548c27
[ 8.246] (II) NOUVEAU(0): 235054bfee8081c0810f9500950f0101
[ 8.246] (II) NOUVEAU(0): 0101010101019a29a0d0518422305098
[ 8.246] (II) NOUVEAU(0): 36006fe510000006000000fd00384c1f
[ 8.246] (II) NOUVEAU(0): 5315000a202020202020000000fc0041
[ 8.246] (II) NOUVEAU(0): 63657220414c31373136570a000000ff
[ 8.246] (II) NOUVEAU(0): 004c41383034303334343330330a00aa
[ 8.246] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz eP)
[ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42) -
T400 Screen turns Black/Gray and System Freezes.
My screen turns black or gray and the system freezes.
The only way to fix it is to restart the system by opening all forms of power supply (adaptor and the battery).
Sometimes it works fine for a day or two, sometimes only for a few hours.
I think the problem has something do with my graphics drivers or some other driver from Lenovo.
I have used Lenovo Thinkvantage Toolbox to check for hardware errors and it shows that everything is working fine.
I have updated all drivers but still the problem is there.
I still have warrenty period left.
I bought my system 2 years ago and have never had any problem untill this one.
My system specifications are given below.
Model: Lenovo Thinkpad T400 2764 CTO
BIOS version (Latest?): 3.18 (latest)
OS loaded (ex. Win 7 64bit): Microsoft Windows 7 Ultimate 64-bit
Lenovo default OS: Microsoft Windows Vista Basic 32-bit
Updates from TVSU completed? Yes.
Updates from Windows Update? Yes.
Power Manager Version: 3.25
RAM installed (brand and 1 x 4gb, 1 x 2gb, 2 x 2gb?) 2 x 2 GB
Model of discrete card: ATI Mobility Radeon 3400
Any error notification? No
3rd party application installed for the graphic card? No.
Any particular application which is running on the time this issue arises? No.
Running on battery? AC? Docked on station? Error occurs in any state.
Any solutions?
Anyone had similar problems?
Thanks.My problem seems to be similar. Sometimes my screen also turns black unexpectedly and the notebook freezes completely! In some cases I see a bluescreen of death and in some very few cases it restarts automatically. If it does not restart automatically I have to hold down the power button for some seconds to turn the notebook completely off (so that the "power on led" left to the "battery led" is not illuminated any more). Thereafter it is possible to start the notebook again. So unlike user 400 I do not have to remove any connected power sources.
The issue seems to occur out of nowere and seems not to be related to the use of a specific software. My system is up to date with lenovo drivers and windows update, exept the BIOS, which I updated the system two times since the problem exists since more than half a year!!
I also give my system specifications below:
Model: Lenovo Thinkpad T400 2767 WC8
BIOS version: 3.16
OS: Windows 7 Professional x64
Updates from TVSU completed? Yes. (exept newest BIOS)
Updates from Windows Update? Yes.
Power Manager Version: 3.25
RAM installed 2 x 2 GB (bought and placed by loenovo reseller)
Model of discrete card and integrated card: ATI Mobility Radeon 3400 and intel mobility 4 chip
Any error notification? yes, entry for bsod or kernel-power-issue in the system protocol (but no specific error)
3rd party application installed for the graphic card? No.
Any particular application which is running on the time this issue arises? No.
I use my notebook with AC connected, with battery and most of the time in the advanced mini dock! Since a few days the error never happened when the notebook was docked! So I thought it is a power issue or has something to do with the graphics card.
But now I found out, that the issue might be related to the wlan card! This is because I never had a wireless lan connection when the notebook was docked, since I use a LAN cable. But a few days before I had to use the wlan while my notebook was docked and the error occured after some time. Furthermore, as far as I remember the issue never occured when the wireless lan was switched off and not docked, but I will check that again.
The issue also never occured when I booted windows in safe mode.
@400
Maybe you can check if it is the same for you with your wlan? Maybe together we can find out what the exact problem is. I want to find out what is the problem to get it fixed by lenovo. Until now they alwas said, that they had never experienced such an error.
Please keep on reporting.
Thanks for any help -
K9N2 SLI Platinum: LED Codes and System Freezes
This morning I was working to resolve an issue with system freezes I have been having over the last few days. Upon restarting the computer I noticed that all four of my LEDs are currently red. If I remember correctly, this indicates a CPU issue. Due to this, I believe that the system freezes are being caused by the CPU, however I have yet to notice any issues other than the occasional freeze. According to CoreCenter my CPU temp idles at about 40-43c and peaks at about 50c when gaming, so I do not believe that the CPU is overheating. Is it possible that the CPU is still the problem if it is not overheating and I am not noticing diminished performance?
I have had this system over a year and have never had these issues before, nor have I replaced any hardware. The only software changes have been Windows updates and games. Nothing major. I am currently using Comodo and SuperAntiSpyware for my firewall/antivirus/antispyware programs.
If any additional information is needed, please ask. Thank you for your time.>>Posting Guide<<
-
Z87 GD 65 Gaming - Enable Ethernet and system freezes
Guys
New build
Z87 GD65 Gaming
OCZ Nocti mSATA 128Gb
i5 4670k
Crucial M4 128Gb
Crucial Ballistix 1600 x 16Gb
Win 7 x64
Things went ok for the first couple of days using my old build on the M4 SSD I just had to add the new drivers.
Then system started freezing as the desktop was loading, nothing worked so a power cycle was required. Got progressively worse. Rebuilt on Crucial M4 and all ok until Ethernet drivers were added and more instant freezes.
From safe mode I disabled the NIC and all booted up with no issues, enabled NIC and there was an instant freeze again.
Cleaned the killer drivers out using the cleaner and reinstalled the stickied drivers, still froze.
Several steps left to test - I'll install onto a SATA HD to take out the SSD issues.
I'll install a standalone intel NIC and see what happens?
Other than that looks like its a bad board Will see what SCANS returns policy is like
Cheers
Simon
Found out that there were issues with freezing with Crucial SSD's so rebuild onto the mSATA and all looked ok, until I added the Ethernet drivers and the freeze occurred again. RebuiltJust thought I'd update my 'fix' - I hate it in forums when you don't see what the fix was!!
After several rebuilds I noticed that my Win 7 OS DVD was an old one and didn't have SP1!!! When I reolved that and only used the bare ethernet drivers I had no more NIC issues.
After about a week my ASUS 6850 stopped working, no display not even BIOS, so started using the internal GPU. I decided to try properly cleaning the AMD drivers out and re installing and to my relief everything now works
Not the smoothest build I've ever done. Never used MSI boards before always been an ASUS user, but not impressed with supplied software for the boards.
cheers
Simon -
Green screen and video freezing while maximizing videos playing in iTunes?
After a year-and-a-half of seamless operation, iTunes started malfunctioning yesterday. When trying to play a video (either a TV show or a music video), the video will often freeze when I hit command-F to maximize. The audio keeps playing just fine. Sometimes I'm able to get the video running again by hitting escape and command-F a few times, and by hitting space bar repeatedly to pause and unpause. Before starting to work, iTunes displays a green screen for a half-second.
My system is at 10.5.8 and my iTunes is fully updated. My computer is an aluminum-unibody MacBook Pro 15".
I have tried turning the computer off for a while, reinstalling iTunes, and switching from discrete graphics to integrated graphics, all without any improvement. I doesn't happen every time I play a video or a TV show, but it does happen a majority of the time, and it often takes 10-20 seconds of fiddling to get the video to play.
Any ideas? I'm stumped.I've been having the same problem as you Mitlov. This is one of the reasons I always get a bit leery about updating my current version of iTunes, iPhone, or iPod. Something always stops working amongst one or more of them. Two years ago I updated iPod and I remember it took a month before I could get the iPod to work again. If you hear about a fix for this problem (besides just buying Snow Leopard) please post it back in the discussions. There are a lot of people who will benefit from it!
-
Blue Screen and General Freezing- New 10.2 version
Forgive me if I sound a bit miffed, but just trying to sign up to ask for help has led to many problems and I'm not in a particularily great mood.
I run the newest version of FireFox, on a Windows Vista system, and when prompted, I updated my flash to the recently released. I first unecountered a freezing problem when trying to then use it, such as on Youtube, and when I checked here I learned about having the right click and uncheck a box. I don't remember now what it said, and it doesn't seem to exist for me anymore,but it worked and I didn't seem to have any further problems.
However, about the same time, I began having bluescreens instead. The error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Apparently this happens when drivers have not been properly installed, or are corrupted. So I assume, Adobe being the only thing I've downloaded lately, that it's the cause. I can count on one hand how many bluescreens I've ever had with my computer, but the tally in the last week is over 10 just since the update.
My question, problem, whathaveyou, is this: Is there a reliable place where I can revert back to the old version which, if occasionally tempermental, worked excellently on my system, or is there any way I can do something to fix this one so I can use my computer without fear of losing everything at the drop of a hat?
Incidentally, since downloading, I've also been having trouble just connecting to the internet. I use wireless, and the reciever is downstairs, so it's not a great distance away, but now enjoys randomly blipping out and refusing to recognizer the d-link driver. It also likes telling me I can plug it into a different slot for better efficiency, but if that one actually exists, I can't find it. I don't even have the number of connections it insists on, unless they're inside.
My computer's over 3 years old now- I worry all these dumps and problems might be harming it. Please, if there's anything that can be done...Sorry about the spam posts in this forum; there is nothing we can do about it except to wait for a moderator to remove them.
Meanwhile posts like yours get lost in the jungle...
You mentioned that you have unchecked some box; was it Hardware Acceleration? Is it still unchecked? (Right-click on the Flash object at http://www.adobe.com/software/flash/about/, then select Settings.) Or do you get a blue screen here too?
If that happens (blue screen), or if Hardware Acceleration is still unchecked, try to update the device drivers for your graphics/video/display adapter.
If that is not an option, or if your video drivers are already up-to-date, I recommend that you do a System Restore to a date before the update occurred.
You can also try to uninstall Flash Player (using the uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html ), then download and install an older FP version from http://kb2.adobe.com/cps/142/tn_14266.html
P.S. it may also be worth to try the latest Flash Player version 10.2.152.32 -
Macbook Pro will not boot beyond grey screen. System freezes.
My Macbook Pro will not boot-up or get beyond the grey screen (with spinning gear wheel.) I've tried all the recommended actions: resetting PRAM, disk repair, permissions repair, re-boot in safe mode etc but still the problem persists. When viewing the safe-boot in verbose mode, the system seems to hang at the stage when it's checking the Airport & Ethernet - the last line on the page reads: "AppleBCOM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?"
Any ideas how to fix this without doing an Archive & Install?
I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them.
Any help gratefully received. Many thanks.jfromplymouth wrote: ...I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them...
Archive and Install just affects the System files, so any apps you have should still be available afterwards. The Installer on the disk that came with your Mac, when you bought it, will tell you this before you proceed. Of course, you can always back out of the Installer if you feel chicken.
Notwithstanding it is still necessary to backup everything. You need to check that Time Machine is set to also backup your Applications folder. It might be set not to do this.
It may not be necessary to worry about this if you have the original installer disc(s). I think any stuff downloaded from iTunes etc can be re-downloaded. However, it's probably quicker to get Time Machine to backup your apps if you can afford the HDD space. It's bound to be quicker than re-downloading the stuff plus any updates. And of course there's those Apps that you have but forgotten about. What about them? -
Mini iPad screen and system issues
Hi im a new mini ipad user and i want to seek your help on 2 things. 1) what do i need to do if the sceen of my ipad is blinking? I just bought it 2 weeks ago. 2) why is it that the system is crashing when you open 3 applications then suddenly it will go back to the home page screen? Thanks in advance
Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo. -
FROZEN SCREENS AND STILL FREEZING ON KIDS TV OPTIO...
Possibly related to the current software update but my youview box keeps freezing on the menu screens... the only option i have is to reset the box.. Also noted that the box seems to keep losing the interenet connection for some reason and as mentioned in some messages i'm also getting the screen freezing when i go into the kids tv options....
what is going on ? Can anyone from BT enlightened me with an answer which will solve my problems ??
I am obviously not getting the service I'm paying for so starting to think that switching back to SKY might be my only optionHi Guys
Send us in your details using the contact us form in my profile. It's in the section 'About Me' and we can have this looked into.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
I have a server written in C that uses sockets to get datagrams from my Java GUI "client" (i.e. a Java program on the same machine). In actuality the bulk of the C code is provided to me as an object file and uses PVM to communicate with a C client (on a different machine) that sends rendering information to it.
Whenever I add the input sockets on the C server it seems to crash spontaneously and hang my system. Whenever I remove the socket initiliazation code (i.e. no socket code whatsoever) my computer does not crash.
Does anyone know what's causing this? I know it's something related to sockets because the Java GUI that I invoke from C (without the sockets implemented) does not hang my linux box. It seemingly needs to be quite a big error to freeze linux entirely and not just stall a process in linux.
What kind of errors using sockets usually cause systems to hang entirely?I guess these would be a better questions:
1. Having conflicting ports will not cause systems to hang correct?
2. Does anyone have experience with PVM? Would using PVM and adding custom sockets code cause conflicts that would hang a system? -
Slow boot after blue screen and system restore
I did the updates (Security 2008-002, Safari 3.1 and others) in Software Updates and then could not get past the blue screen. Tried all the advice on these boards but none worked. So I used Time Machine to restore the system. It worked except that now the booting process pauses (on a blue screen) for about 5 minutes. Then the process completes and everything appears to be fine.
However, this delayed booting does not seem right and never happened before.
Anything I can do?
thands
KenWhat kind of incompatibility issues?
How far does the xp installation get?
What do you mean by 'uninstalling the vista bootloader'?
It seems very unusual that you can't boot from the CD anymore. Maybe double check the boot priority again, or have CD as the only boot option?
I can make XP BSOD and Reboot on my V200 by setting the SATA mode to AHCI. *no floppy = no F6 driver installation
I can't recall how VISTA reacted to setting SATA to AHCI.
Let me know how it turns out.
Maybe you are looking for
-
My ipod shuffle 3rd generation is not showing in mac or itunes. It can play songs which were saved earlier. It can be charged also with the USB cable. I have updated my itunes. Reinstalled the same but still ipod is not showing in mac as well as in i
-
Reimporting hotmail after OS reinstall
**** all, I had to reinstall my OS and everythig went fine. I copied my users folder prior to the reinstall and copied it back to my /Users/ folder after the OS reinstall. For some strange reason mail reimported all of my accounts except for the hotm
-
Hi All, I am using RFC_READ_TABLE for reading values from a table. While reading, I get 16 digit GUID for all records. There is a function in SAP (CRM 4.0) which can convert 16 digit GUID into 32 digit GUID (actual). I will have to use that function
-
Why is the "out" called a field when it is a PrintStream object? I thought it was an object with methods and fields. I am trying to understand inheritance terminology. Thanks!
-
Iphone 3G shuts down for no reason
my 1 year old white iphone 3G has been shutting for no reason when the battery level is less than a quarter. and it takes a full 1-2 minute to restart when i force shut it by pressing the home and sleep/wake buttons together. the main problem comes w