Screen Area

I am trying to produce a movie on 5.5 around the start button on Windows 7. I have tried this on a laptop and pc screen and although I have used every possible option in the Screen Area from Full screen to customising options (both large and small), when I preview it I still need to scroll down to see the start button.  Can anyone advise on what it is I am doing wrong and whether Captivate 5.5 is compatible with Windows 7?

Hi there
It's a problem that has existed since before Captivate even existed. You are capturing full screen. If you are choosing to play the movie back at the same size, the area you have available is smaller than what you recorded. Hence the scrolling.
There are a few options here.
1. Record a smaller area and focus on just what you want to show
2. Record at full screen, then use the "scalable" option when you publish. (not sure if that exists on 5.5 so may not be an option for you)
3. Configure the link that starts the movie to point at the ,SWF file and not the .HTM (Scaling will occur automatically)
4. Rescale the project to become smaller, then publish it.
As you can see, many different approaches you can use to avoid it.
Cheers... Rick

Similar Messages

  • Hiding fields in screen area 031

    Hello Masters,
    I have query on hiding following fields in Quality Notification screen area 031of Notification Type Q2:
    1) Windows-32 bit box (big box/window under Description field)
    2) Long Text icon available next to big box/window which is also available next to Description field in header
    I tried 'Field Selection: General Screens' configuration under Define Screen Templates, was unable to hide above mentioned field(window) and icon.
    I hope I was able to describe what issue is and will get some help from you masters.
    Thanks and regards,
    Devang

    Use (or Create) authorization [field|http://help.sap.com/saphelp_nw04/helpdata/en/52/67168c439b11d1896f0000e8322d00/frameset.htm] and [object|http://help.sap.com/saphelp_nw04/helpdata/en/52/6716a6439b11d1896f0000e8322d00/frameset.htm], in the BAdI [check this authorization|http://help.sap.com/abapdocu_70/en/ABAPAUTHORITY-CHECK.htm] and change the INVISIBLE field and not the ACTIVE field in SCREEN structure.
    - [Programming Authorization Checks|http://help.sap.com/saphelp_nw04/helpdata/en/52/6712ac439b11d1896f0000e8322d00/frameset.htm]
    Inform system admin to manage those new object and field in the user roles. ([SAP Authorization Concept Modules|http://help.sap.com/saphelp_banking463/helpdata/en/5c/deaa74d3d411d3970a0000e82de14a/frameset.htm])
    Regards,
    Raymond
    NB: The "d" of BAdI should always been in lowercase, except in statement GET BADI...

  • Populating the screen area with color

    Please help me
    how could i populate the screen area with color based on the x,y position values getting from the database table
    x,y positions are saved in the database already i want to use those values

    Do you mean if x is 200 and y is 300 then you want a color like 0x200300?

  • I was messing with the computer, not sure what i hit but now all my toolbars at the top of the screen are gone? (file, edit, history, tools and my forward and back button). Please help me get these settings back to the way they were?

    My file, edit, view, history, bookmarks, tools, and help buttons at the top of the screen are gone, along with my forward and back button.

    For details of how to restore it, see https://support.mozilla.com/kb/menu+bar+is+missing
    Once the menu bar is restored, you can use the Toolbars entry in the View menu to restore other toolbars such as the navigation toolbar.

  • I just updated my 4S with iOS 8.1.1 and now my screens are not proportioned correctly - just a bit to long and wide. Is there a way to adjust? Or go back to 8.1?

    I just updated my 4S with iOS 8.1.1 and now my screens are not proportioned correctly - just a bit to long and wide. Is there a way to adjust? Or go back to 8.1?

        lisan1234,
    I am sorry to hear about the screen issues. To clarify, do you only notice the screen proportion difference when in a certain application? By to long or wide are you stating that parts of the screen images are cut off? Please provide details
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • Since last 2 updates (yesterday to ios 8.3) the screen area on my ipad mini when in Facebook is smaller with a big empty 'frame' round the edges

    Since last 2 updates the screen area on my ipad mini when I am on Facebook has shrunk with an empty area like a frame round the edges. How can I get it back to fill the screen?

    How to remove ios 8 ? This is biggest failure of Apple. It slow down my ipad , freez application, freez key board....?

  • I dropped my iPod touch 4 generation on my kitchen tile and it shattered, like chunks of the screen are coming off. But everything works and I've had it for a 1 ½ years now. I don't have the extended warranty or anything but can I get it replaced somehow

    I dropped my iPod touch 4 generation on my kitchen tile and it shattered, like chunks of the screen are coming off. But everything works and I’ve had it for a 1 ½ years now. I don’t have the extended warranty or anything but can I get it replaced somehow? if anyone knows anything please let me know. thank you!

    Depending on the extent of the damage, Apple may replace the iPod for a flat fee; see the Repair Pricing section here:
    http://www.apple.com/support/ipod/service/faq/
    There are independent iPod repair services that may be able to repair the iPod for less. Do a web search for "ipod repair". Note, though, that if you elect to have the iPod serviced by an unauthorized shop, all further warranty will be void.
    Regards.

  • HT5463 Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is

    Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is tickedP

    Chris thanks for your reply, if none of the Do Not Disturb settings are switched on - then am I right that this setting will have no effect. I.e. I want my phone to ring at all times, so have turned off all of the do not disturb settings

  • Why some screens are hiddens in BDC record mode?

    I'm trying to create a BDC record in VA01 transaction but in this mode some screens are hidden  just like screen "Material substitution(selecting a material)" Dynpro 800 Program "SAPMV45A"
    Is it possible to show this screen in BDC recorder? how can i do it?
    Regards

    Hi,
    i´m no expert in this but for a recording of material substitution you could try with transactions VB12 or VB13
    Best regards.

  • The display of sub screen exceeds the sub screen area

    Hi Experts,
      I have a requirement, that i need to make changes to one of the screens in the standard transaction. I found there is a screen exit exist for this. This screen is called in the tab strip(In the standard transaction). I have done the screen changes in the sub screen. When calling the standard transaction this sub screen exceeds the sub screen area of the standard transaction tab strip. I know if the sub screen size is more than the sub screen area then scroll bars will be displayed automatically. But i am facing a strange problem that the display of sub screen exceeds the sub screen area. I need scrol bar instead of exceeding the sub screen.
      Please help me to solve this problem
    Regards,
    Bujji

    Anyone has any suggestions for my question. Any help is much appreciated. Thanks.

  • Viewer extending beyond screen area

    Hi--Still haven't found an answer in forums. When Aperture is booted up, it appears that the viewer doesn't show images selected in browser strip, though they look fine in full screen mode. It turns out that they are showing, but way off on the right side beyond my 15" Macbook visible screen. When I push the window to the left and keep pulling out the lower left corner to reveal more of the viewer--it extends at least four or five times beyond the screen. Hitting the + or - buttons doesn't bring it back. Also, the three button display controls that should be visible at the lower right of the screen are not visible. Any help would be greatly appreciate. I don't have spaces activated...

    AI doesn't like numbers that large. You'll have to do it as a scaled number and change it on a copy of the file or in the axis title, label it as thousands or millions of units.

  • I have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

    i have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

    From what I can see, unless you're doing things with old versions of Xcode on a Mac (in which case, the solution seems to be to upgrade to the latest version), this seems to e an iTunes issue.
    Accepting that it works fine with another iPad, I suggest trying the following:
    1. Restart the non-working iPad
    2. If that doesn't work, reinstall iTunes. If you're on a Windows PC, I suggest using Control Panel to uninstall all the Apple apps, restarting the PC, and doing a fresh install. If you're using a Mac, a repair permissions might help too.
    iTunes 10.3 is now available, and that may make a difference.

  • Creating screen area

    Hi
    I dont have much expeience in abap so any help is deeply appreciated.
    This is what i am supposed to do.
    someone please explain me step by step method as i how to ahieve this assuming that i am a beginner in sap abap.
    also how can i see sap note number 86050
    Create the screen area.
    Double-click SAPLCJWB0205_CUSTSCR1_SAPLXCN10600 and then choose Fullscreen. The screen has been preconfigured by SAP. You can delete these fields and add new ones:
    Choose Goto -> Dict./Program fields
    Maintain the table/field name PROJ and select the fields to appear on the screen.
    Generate the screen.
    For detailed information, see SAP Note number 86050.

    > Hi
    > I dont have much expeience in abap so any help is
    > deeply appreciated.
    > This is what i am supposed to do.
    > someone please explain me step by step method as i
    > how to ahieve this assuming that i am a beginner in
    > sap abap.
    > also how can i see sap note number 86050
    >
    > Create the screen area.
    > Double-click SAPLCJWB0205_CUSTSCR1_SAPLXCN10600 and
    > then choose Fullscreen. The screen has been
    > preconfigured by SAP. You can delete these fields and
    > add new ones:
    > Choose Goto -> Dict./Program fields
    > Maintain the table/field name PROJ and select the
    > fields to appear on the screen.
    > Generate the screen.
    > For detailed information, see SAP Note number 86050.
    hi,
    if u want to add new fields in the transaction,
    First create a project in cmod and attach the enhancement CNEX0006 to the project.
    1.go to se11 and in the PROJ table u will find ci_proj include , in this add ur custom fields.
    2.go to se51 give SAPLXCN1 in the program name with screen number 0600 , create the subscreen and in the layout choose Dict./Program fields and drag and drop in the screen .
    3. if u want to write any logic before the screen is displayed do it in PBO.
    4. now in the function exit EXIT_SAPLCJWB_002 , go in the   INCLUDE ZXCN1U11 and write this logic
    move-corresponding sap_proj_imp to proj.
    5.4. now in the function exit EXIT_SAPLCJWB_003 , go in the    INCLUDE ZXCN1U12. and write this logic
    move-corresponding proj to cnci_proj_exp.
    Activate the project .
    Regards
    Syed

  • Screen area of Windows

    Dear All
    How can I get Screen Area of Windows from Form. e.g. 800x600, 1024x768 pixels.
    Please Reply.

    do you mean the Area of your MDI-Window? Then use the set_window_property :
    Set_Window_Property(FORMS_MDI_WINDOW, POSITION, 5,10)
    Set_Window_Property(FORMS_MDI_WINDOW, WINDOW_STATE, MINIMIZE)
    Set_Window_Property(FORMS_MDI_WINDOW, WINDOW_SIZE, 1024, 768)

  • HT6099 why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all 120Hz. So much for future proof.

    why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all >120Hz. So much for future proof.

    http://en.wikipedia.org/wiki/4K_resolution
    http://en.wikipedia.org/wiki/4K_UHD
    http://www.techradar.com/news/home-cinema/high-definition/4k-tv-resolution-what- you-need-to-know-1048954
    Need More Pixels? Samsung’s 2014 UHD TVs Ship This Month
    Wall Street Journal · 2 hours ago
    Samsung’s 2014 lineup of Ultra High-Definition (aka 4K) TVs are on the way, and thanks to UHD content deals struck with Fox and Paramount—not to mention the…
    Focusing on TVs and 1080p and 60Hz isn't the question, or the 'future'

  • This is old. ITunes doesnot have a support you can call to get things done.  There needs to be an easier way to contact them? The screens are not user friendly.

    Help!  I need to contact ITunes by email because they have no phones to call anyone.  The screens are not user friendly.  This makes life very diffcult.

    Click Support at the top of the page, then click Contact Us.
    Very simple.

Maybe you are looking for