Screen at start up SAP B1
Hi, every body.
I don't know to make a screen at start up SAP B1 is moved, for Example: a picture wave ripple of SAP at start up.
Tien,
I am not sure if I understand your question correctly.
But, if you are asking about <b>removing the wave ripple</b> at the time of login then follow the steps below.
Firstly, the ripple animation is due to sapss.avi file. You can locate it under
C:\Program Files\SAP\SAP Business One\sapss.avi
Rename it to sapss_old.avi and the ripple effect will no longer appear.
If you are saying that it is not appearing anymore then check if the avi file has been moved / renamed and restore it back to its original name sapss.avi
Regards
Suda
Similar Messages
-
Starting with SAP fiori & SAP screen personas ...
Hi all,
Actually i had a requirement from the client and want to start with SAP personas, can anyone tell me how to get started with it,
i saw a lot of links on net but most of them were telling me only benefits of SAP personas. The thing i needed was Tutorials to start with SAP personas means how to start SAP personas, what is the transaction for this, etc.
Please Help ....
Thanks & Regards,
Aayush AggarwalHi Aayush,
Personas is an add-on that needs to be downloaded from Service market place and installed on your system. For system pre-requisites, please refer to master and configuration guides at
SAP Screen Personas 2.0 – SAP Help Portal Page
You can refer to application help on usage:
http://help.sap.com/saphelp_personas200_silverlight/helpdata/en/33/30f15101d9445ee10000000a423f68/frameset.htm
cheers
Chinthan -
Hi
I am starting the SAP through SAP MMC but I am not able to see anything in MMC.
Also SAPC11_0 server is not getting started.
After initial investigation I found that there is some profile issue because event viewer says
Cannot open Profile C:/usr/sap/C11/sys/profile/START_DVEBMGS00_sapserver
"The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile C:\usr\sap\C11\sys\profile\START_DVEBMGS00_sapserver. (Error 2 ENOENT*: No such file or directory OR: The system cannot find the file specified. ) [ntservstart.cpp 578].
Can anyone pl advise on this
Sukrut s
Message was edited by:
sukrut sardeshpandeHi
Sorry for that.
Please find the details of starup profile.
==========
SAPSYSTEMNAME = C11
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = sapserver
#old_value: 4 changed: SAPUSER 11.10.2007 17:07:01
rdisp/wp_no_dia = 2
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 0
rdisp/wp_no_btc = 1
rdisp/wp_no_spo = 1
PHYS_MEMSIZE = 168
abap/buffersize = 200000
Signon parameters
Default client on signon screen
#login/system_client = 001
System Language
zcsa/system_language = E
#old_value: DE changed: SAPUSER 11.10.2007 17:05:11
zcsa/installed_languages = ED
#parameter created by: SAPUSER 11.10.2007 17:05:11
zcsa/table_buffer_area = 6000640
#parameter created by: SAPUSER 11.10.2007 17:05:11
rtbb/buffer_length = 2000
#parameter created by: SAPUSER 11.10.2007 17:05:11
rsdb/cua/buffersize = 3000
#parameter created by: SAPUSER 11.10.2007 17:05:11
zcsa/presentation_buffer_area = 4400128
#parameter created by: SAPUSER 11.10.2007 17:05:11
rdisp/appc_ca_blk_no = 100
#parameter created by: SAPUSER 11.10.2007 17:05:11
rdisp/wp_ca_blk_no = 300
#parameter created by: SAPUSER 11.10.2007 17:05:11
rsdb/ntab/entrycount = 20000
#parameter created by: SAPUSER 11.10.2007 17:05:11
rsdb/ntab/ftabsize = 30000
#parameter created by: SAPUSER 11.10.2007 17:05:11
rsdb/ntab/irbdsize = 6000
#parameter created by: SAPUSER 11.10.2007 17:05:11
rsdb/ntab/sntabsize = 3000
#parameter created by: SAPUSER 11.10.2007 17:05:11
DIR_ROLL = C:\usr\sap\C11\DVEBMGS00\data
#parameter created by: SAPUSER 11.10.2007 17:05:11
DIR_PAGING = C:\usr\sap\C11\DVEBMGS00\data
#parameter created by: SAPUSER 11.10.2007 17:05:11
DIR_DATA = C:\usr\sap\C11\DVEBMGS00\data
#parameter created by: SAPUSER 11.10.2007 17:05:11
DIR_REORG = C:\usr\sap\C11\DVEBMGS00\data
#parameter created by: SAPUSER 11.10.2007 17:05:11
DIR_TRANS =
sapserver\sapmnt\trans
#parameter created by: SAPUSER 11.10.2007 17:05:11
DIR_TEMP = .
#parameter created by: SAPUSER 11.10.2007 17:05:11
DIR_SORTTMP = C:\usr\sap\C11\DVEBMGS00\data
#parameter created by: SAPUSER 11.10.2007 17:05:11
install/codepage/appl_server = 1100
#parameter created by: SAPUSER 11.10.2007 17:05:11
abap/use_paging = 0
#parameter created by: SAPUSER 11.10.2007 17:05:11
ztta/roll_first = 1024
#parameter created by: SAPUSER 11.10.2007 17:05:11
ztta/roll_area = 2000896
#parameter created by: SAPUSER 11.10.2007 17:05:11
rdisp/ROLL_SHM = 1024
#parameter created by: SAPUSER 11.10.2007 17:05:11
rdisp/ROLL_MAXFS = 1024
#parameter created by: SAPUSER 11.10.2007 17:05:11
rdisp/PG_SHM = 1280
#parameter created by: SAPUSER 11.10.2007 17:05:11
rdisp/PG_MAXFS = 32768
#parameter created by: SAPUSER 11.10.2007 17:05:11
abap/heap_area_dia = 2000683008
#parameter created by: SAPUSER 11.10.2007 17:05:11
abap/heap_area_nondia = 2000683008
#parameter created by: SAPUSER 11.10.2007 17:05:11
abap/heap_area_total = 2000683008
#parameter created by: SAPUSER 11.10.2007 17:05:11
abap/heaplimit = 40894464
#parameter created by: SAPUSER 11.10.2007 17:05:11
abap/swap_reserve = 20971520
#parameter created by: SAPUSER 11.10.2007 17:05:11
ztta/roll_extension = 2000683008
#parameter created by: SAPUSER 11.10.2007 17:05:11
em/initial_size_MB = 168
#parameter created by: SAPUSER 11.10.2007 17:05:11
em/blocksize_KB = 1024
#parameter created by: SAPUSER 11.10.2007 17:05:11
em/stat_log_size_MB = 20
#parameter created by: SAPUSER 11.10.2007 17:05:11
em/stat_log_timeout = 600
#parameter created by: SAPUSER 11.10.2007 17:05:11
em/address_space_MB = 512 -
Empty screen at starting webclient
hi *,
we're getting an empty screen, when starting the crm2007 webclient. by empty i mean that the skin is loaded, i can recognize the L-structure, the back-button is also visible and at the position where in standard skin normally used to appear a picture there is only written 'Hello, I am empty Hello, I am empty'... but there ain't no navigation bar or functional links...
any suggestions?
regards, tomHo Thomas,
Could you please try the following:
a) On SAP standard menu -> right click on 'Favorites' folder -> select 'Add Other Objects' -> select 'BSP Application' from pop-up -> enter BSP Application = CRM_UI_FRAME, Description = Log-on Page and Start Page = default.htm -> save
b) Double-click on Log-on Page (favorites folder) -> enter USER = CRM USER (example: CRMUSER01), enter Password = xxxxx ->
should display your business role specific new CRM WEB UI
Please note that you have to try 5/6 times - if you are activating CRM WEB UI for the first time due to the default time out session. You can monitor the process in SM50...
Once again, I strongly suggest you to check the link which I forwarded to you to make sure that all the steps have been taken care...
Still, you are having the problem - please don't hesitate to let me know...
Cheers,
Peter J. -
Grey Screen at start-up - Troubleshoot harddrive and/or logic board?
Hi everyone. Sorry for the lengthy post, but hopefully you can help me - I've spent a lot of time on the boards already, but hoped you could clarify some things.
The problem is my Powerbook will not get past the grey screen at start-up. It will not boot off the 10.5 install disk and I can't eject the install disk to run the hardware test disk. Removing 3rd party ram, resetting PRAM, NVRAM, attempting to boot in 'safe' mode haven't helped. The harddrive is softly clicking/searching.
So some questions:
1) Is it possible that an interrupted time machine backup will bork the drive to the point where it wont boot? (See back-story below). I wouldn't have thought so, but prove me wrong.
2) Should I be able to boot from the install disk if the harddrive is stuffed?
3) If it is hardware, it's either the logic board or the drive. Is there any way to determine what it is (eg: is it possible to do a remote hardware test?)
Edit: Just tried mounting the drive in target disk mode using an iBook, but it wouldn't mount. Powerbook displays a black screen.
Oh, and I should point out that this is well out of warranty and any fixes would have to be cheap : ). Basically I need to determine if it's the drive or the logic board, preferably without having to buy and install a new drive when it may not be the problem.
Any help or advice would be appreciated.
Cheers
- Ben
Here's the back story if it's any help; recently upgraded to 10.5, created a base install disk image of all installed and registered apps (in the event that my drive failed). Copied data etc from the previous system over. It ran fine for a few days. This morning I ran time machine for the first time, left the computer for a while, came back and the screen was black (as if it was just displaying black, as opposed to off). Thinking it was just a display issue (which I've seen before), I put the system to sleep (power button, then 's'), woke it up again; still black. So I forced a shut down (wouldn't allow me to do a normal shut down, because dialogue boxes must have been preventing it) and on boot I got the grey screen.
-------Hi Ben W. I don't have a good answer for you, but based on your information and what you've done, I think I would try starting the machine after disconnecting the harddrive. That requires taking the top off first, for which instructions are on ifixit.com.
I can conjecture that a blown HD is preventing normal operation, perhaps sucking the power down, disrupting the optical drive, etc. This is purely conjecture, but costs you nothing but your time. If this turns out to be the case, I figure the optical drive should start responding again (hold C key during reboot, etc). -
Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any
cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears,
and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After
about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling,
so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the
driver wasnt for the system, which was wrong. I made it work somehow, but it was still sluggish. I rolled it back to an earlier driver, and now it works fine. No sluggish performance / slight freeze window thing going on.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change
this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1
Please excuse the small text at the beginning, there isn't an option to un-do that error.You are very wrong about that mystified. What do YOU think made my computer work without beeping at all hu? (I bet you're gonna tell me). I figured it out.
RE-INSTALL WINDOWS 7 OS.
SOLVED.
DOESN'T BEEP ANY MORE.
THAT IS A PART OF microsoft ISN'T IT.
::: EGO KILLER 9000 ::: -
While starting the SAP, Disp+Work.exe is getting stopped
Hi All,
SAP Discovery System has been installed. While starting the SAP, Disp+Work.exe is getting stopped. But I checked MaxDB and it is working fine.
Kindly look into the below log dev_disp and advice me the solution.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 10
sid ERP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 119
intno 20050900
make: multithreaded, Unicode, optimized
pid 2420
Mon Sep 15 20:16:06 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (10 2420) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 119 successfully loaded
shared lib "dw_xtc.dll" version 119 successfully loaded
shared lib "dw_stl.dll" version 119 successfully loaded
shared lib "dw_gui.dll" version 119 successfully loaded
shared lib "dw_mdm.dll" version 119 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3910
Mon Sep 15 20:16:11 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ORX-SAPDEMO_ERP_10 <
DpShMCreate: sizeof(wp_adm) 17232 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06E70040, size: 4929464)
DpShMCreate: allocated sys_adm at 06E70040
DpShMCreate: allocated wp_adm at 06E72090
DpShMCreate: allocated tm_adm_list at 06E763E0
DpShMCreate: allocated tm_adm at 06E76410
DpShMCreate: allocated wp_ca_adm at 07288F10
DpShMCreate: allocated appc_ca_adm at 0728ECD0
DpShMCreate: allocated comm_adm at 07290C10
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07311AD0
DpShMCreate: allocated gw_adm at 07311B10
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07311B40
DpShMCreate: allocated wall_adm at 07311B48
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 2672
argv[0] = D:\usr\sap\ERP\DVEBMGS10\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ERP\DVEBMGS10\exe\jcontrol.EXE
argv[2] = pf=
iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=3500
argv[5] = -DSAPSYSTEM=10
argv[6] = -DSAPSYSTEMNAME=ERP
argv[7] = -DSAPMYNAME=ORX-SAPDEMO_ERP_10
argv[8] = -DSAPPROFILE=
iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( iwdfvm2160) [dpxxdisp.c 11799]
DpStartStopMsg: send start message (myname is >ORX-SAPDEMO_ERP_10 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Sep 15 20:16:12 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 119
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Mon Sep 15 20:16:15 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1428
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3504) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2672)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Sep 15 20:16:51 2008
ERROR => DpHdlDeadWp: W0 (pid 4952) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W1 (pid 4852) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W2 (pid 5976) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W3 (pid 5000) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W4 (pid 4984) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W5 (pid 1272) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W6 (pid 528) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W7 (pid 5720) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W8 (pid 2648) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W9 (pid 5444) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W10 (pid 5032) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W11 (pid 5620) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:01 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Sep 16 03:17:01 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4952 Ended no 1 0 0
1 DIA 4852 Ended no 1 0 0
2 DIA 5976 Ended no 1 0 0
3 DIA 5000 Ended no 1 0 0
4 DIA 4984 Ended no 1 0 0
5 UPD 1272 Ended no 1 0 0
6 ENQ 528 Ended no 1 0 0
7 ENQ 5720 Ended no 1 0 0
8 BTC 2648 Ended no 1 0 0
9 BTC 5444 Ended no 1 0 0
10 SPO 5032 Ended no 1 0 0
11 UP2 5620 Ended no 1 0 0
Dispatcher Queue Statistics Tue Sep 16 03:17:01 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Tue Sep 16 03:17:01 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Sep 16 03:17:01 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:06 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ORX-SAPDEMO_ERP_10 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1516) (SOFT_KILL)
Stop icman
killing process (1256) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1516 HANDLE:1520)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1516 HANDLE:1520)
wait for end of icman
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:17 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:18 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1256 HANDLE:1528)
[DpProcDied] Process died (PID:2672 HANDLE:1504)
DpStartStopMsg: send stop message (myname is >ORX-SAPDEMO_ERP_10 <)
NiIMyHostName: hostname = 'ORX-SAPDEMO'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Sep 15 20:17:19 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12145]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1508 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1508 (pos=3)
SiSelNRemove: removed sock 1508
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/12
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1508
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2420) [dpxxdisp.c 10417]
Good Bye .....
Thanks in advance.
Regards,
SuneethaHi,
Just check out your filesystem/ directory have sufficient space.
Do paste us dev_rd as the error above " NiIRead: SiRecv failed for "
pasted looks like system uanble to access SAP gateway.
Rgds
Radhakrishna D S -
Screen will start to pixelate and error message appears to restart
I have a iMac G5 17". It will boot up, apple start up screen, Mac OS X screen, and then finally Desktop. but about 20 seconds the screen will start to pixelate and kinda "wig out" then it will tint a dark grey and a error message in multiple languages will appear saying " Push the power button to restart". at this moment the screen is completely frozen. all I can do it power it off.
What could this be? Maybe a bad hard drive? Screen? Power source?Hi...
Better to post your topic in the iMac G5 (PowerPC) community here > iMac (PPC): Desktop Computers: Apple Support Communities
This is the iMac (Intel) community. -
My old 17" MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but I suspect logic board. All checks out OK on the Apple Diagnostic bench. Can a Logic board go intermittant?? Any Ideas any body??
Ive repaired 1000s of laptops over the years (translate: diagnose and replace parts).
Its not that old, Ive owned 100s of laptops (most were free) ....some I still have are nearly 13 years old and still perfect, ....some extremely expensive ones died in under a year.
other than becoming obsolete at some point, there isnt really any "will spoil on" data like Milk for solid state computer parts, ....alas.
You can have a $5000 laptop die in 4 months, and a junker one keep kicking after 10 years.... Ive seen that firsthand countless times.
Common logic dictates that "very expensive = long life" in computers,..... but all the repair people will tell you just the opposite.
I know you have a gripe, I get that all too well honestly . -
I have been requesting help for this for the past HOUR. Firefox is placing ads on my screen at start-up (and they remain there) to get firefox on Android (I don't have a cell phone that uses it), and to go to the firefox site with information on how to use..........I have used firefox for years.........don't need this, and when I go there since it seems to be forced on me, read what is new, and try to close out...........it is back again when I open firefox again. If I keep getting ads from firefox, I will change to another browser!
Firefox 4+ versions use a new build-in home page named <b>about:home</b> with a Google search bar on it (no internet access needed to load that page).<br />
That about:home page only shows some snippets and has a button to restore the previous session if applicable.
If you want a home page without the Restore Previous Session button and the snippets then set another page as the home page like www.google.com used in Firefox 3 versions.
You may be seeing a similar ad on the Google site to install Google Chrome.<br />
In that case use the close X on that ad to close that pop-up and it should stay away unless local storage gets cleared. -
I'm getting the grey screen during start up and can't boot the computer - MacBook Pro with lion.
I did a command r after doing some research but got nervous that it would automatically wipe my hard drive and reinstall OS.
I was nervous because it asked me for language for software use before any options were presented (such as repair via disk utility). It looked similar to an OS install.So I powered off....Is there a risk at command r will result in wiped HD without me actively making that choice?Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless. -
Best Practice to start with SAP NetWeaver BI (BW) to become a BI consultant
Hi there,
I have one Question. As consultant for SAP NetWeaver Portal (Development/Java), I would like to start with SAP NetWeaver BI (System Configuration, Customizing and Development with ABAP/ABAP OO) through e-learning and/or with (e)books.
A system for making practice is available.
Can someone give me a helpful guide how to start and become a BI Consultant for system administration and development within the next 12 months?
Some Questions I have noticed are:
1) The system (application) environment of BI (what is integrated in it - e. g. within the portal, there is a storage for unstructured information like documents or virtual rooms for collaboration between departments - and what does it make)
2) How does development in BI works (development environment, coding, debugging, building, deployment and test) and what is used stronger (ABAP or ABAP OO)? Here, I don't mean how to write ABAP or ABAP OO programs, only the infrastructure from development to transport to a target system
3) How is a BI system to configure as default after installation?
4) Good guides (e/books) to learn ABAP and ABAP OO (as far as possible oriented on the practive)
Of course, these are only a few Question and far from complete. Details and other important points will be appreciated.
Many thanks,
CengizHi,
1) The system (application) environment of BI (what is integrated in it - e. g. within the portal, there is a storage for unstructured information like documents or virtual rooms for collaboration between departments - and what does it make)
Document management from RSA1 transaction of BI helps to attach any unstructured documents at specific level in BI.
2) How does development in BI works (development environment, coding, debugging, building, deployment and test) and what is used stronger (ABAP or ABAP OO)? Here, I don't mean how to write ABAP or ABAP OO programs, only the infrastructure from development to transport to a target system
BI has got a separate tool and GUI to perform all the Extract, Transform and load related activities. ABAP is part of BI but you don't need much extensive ABAP learning. Basic ABAP is sufficient to write routines and extractors.
3) How is a BI system to configure as default after installation?
May be a BASIS person can help you out here about the configuration but this is not the job of BI person.
4) Good guides (e/books) to learn ABAP and ABAP OO (as far as possible oriented on the practive)
You can search for SAM Series learn ABAP in 24 days book. This book is sufficient to learn the ABAP required for working in BI.
But except ABAP you will have to completly learn the BI system to work efficiently.
Regards,
Durgesh. -
Hi Friends,
I have 3 years experience in Software Industry. I an working in Financial Services as a Support Analyst. I want to start my career in SAP - ABAP now. I don't much about SAP-ABAP. I have got access on to SAP server for practice. Can you please suggest me some good links for new starters or some good e-books to start with SAP-ABAP.
Thanks All.Hi Sunil,
Thanks for your reply. Actual I have not done programming so much in these 3 years but I am familiar to all basics of prgromming. Why I want to go in ABAP as in my 3 years I have worked on technical part in my project..
As I have spent only 3 years in Industry, I don't think it is a big deal to start my career with a new trun with ABAP prorgamming. Once I learn ABAP on my own I can shift to any of SAP-ABAP project within my company.
I will visit the link given by you.
Thanks,
Jatinder -
Why is my G5 is stopping on the grey+apple logo screen when starting up?
My G5 is stopping on the grey+apple logo screen when starting up and fans run faster than usual after a couple minutes. I have read many of the posts related here, but it seems none are exactly what I am experiencing. Here is what I have done:
+Disconnected all peripheral devices (except for keyboard and mouse).
+Unplugged power cord and plugged back in.
+Unplugged ethernet cable.
+Removed added memory.
+Reset the SMU button on the logic board.
+Reset the PRAM by pressing Command-Option-P-R keys. It makes its second start up chime but I still get the grey screen.
+After opening the disc door with a paper clip, started up while pressing "C" with Hardware Test CD which found no problems.
+However, also started up with Systemworks disc and ran Disc Doctor, but I get an "unexpected problem, Error found: disk error" while "Checking Directories: Catalog Structure". When trying to run Speed Disc, my hard drive doesn't even show up in the window to select it. Nor does it show up in Disk Viewer.
I have not tried to start up from the original Mac Startup or installation disc that came with the computer. I am not at my G5 right now (having to use the internet at work). If I start up with that disc, will I loose any work (if I haven't already) that I haven't backed up?
Also, the G5 manual suggests replacing the lithium battery inside the tower if I am having problems starting up. I have not read to do this anywhere else except in the manual. It mentions having problems with the date and time which I haven't so I doubt it's the battery.
Any suggestions?
Thanks,
Tony
G5 Power Mac Mac OS X (10.0.x)First and foremost you should never use Norton Utilities Disk Doctor or Speed Disk. They will corrupt your hard drive. NUM is not compatible with modern Macs and is no longer supported by Symantec. I highly recommend you uninstall it. You will find instructions here.
You should do the following:
Boot from your Tiger DVD. After the installer loads select your language and click on the Continue button, then select Disk Utility from the Utilities menu . After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If this does not fix the problem, then it's possible your system files have been damaged in which case you may need to reinstall OS X. You can do this by an Archive and Install which does not require erasing the hard drive. However, the hard drive must be verified as OK per the preceeding intructions. -
Imac have grey screen at start up.
Have grey screen at start with question mark in folder. Have reset PRAM. Have tried start from disk and can not. Need help.
Your drive is shot, time for a new one. The question mark means the computer can't find a drive to boot from. If you have an external clone, you could try booting from that.
Maybe you are looking for
-
IKode Newsletter Software with 30% Discount Off for Christmas
As Christmas is coming. Our iKode Newsletter Software provides 30% discount off for any new customers.iKode Newsletter Software is a web-based email marketing software for sending email newsletters and other marketing campaigns to keep in lifelong co
-
IOS8 iPhone 5 Screen touch failure
Ios8 on iPhone 5 and now the screen keeps bombing out? It stops sensing touch on the majority of the screen. Hard restart gets it back but only for it to eventually fail again! Have had an iPhone from the 3GS & this has to be the worst experience by
-
After activating the replacement smartphone from Verizon, I just had the original smartphone dropped off at FedEx using the return label provided by Verizon Wireless. The FedEx label showed "DECLARED VALUE $*********" with no valued filled in. If Fe
-
Move/copy R3 tables into BI system
Hi Friends, I wanted to move the Std R3 tables to BI system, because I need to use that application data in BI. So Is there anyway that I can transport/move R3 tables to BI. Any help on this greatly appreciated. Thanks Giri
-
Is there an ISAPI 10.1.4.3 webgate available?
I have looked on the download site and the only webgates are the OHS11g version. From My Oracle support I can only find the 10.1.4.2 bp versions. Thanks Andy