Screen becomes extremely bright when running on Win XP

It wont happen when I run it on VM Fushion. Does anybody encounter this problem too?

I'm not sure wether this will solve your particular problem, but in any case you will need to set the PATH variable before it will work. Add "C:\j2sdkee1.3\bin" to the PATH variable and see if this solves it (where j2sdkee1.3 is the installation directory)

Similar Messages

What causes my ipod touch 4g to become extremely hot when i play games or surf the web for more than 30 minutes?

my ipod touch 4g becomes very hot when play games or surf the web for more than 30 minutes. does any body know why?

Maybe the solution is that you iPod is slow is because you are not closing your apps after you use them. To do this you must:
1. Press the Home Button to get out of that app
2. You will return to the Home Screen
3. Click the Home Button twice, (do this quite fast, But not TOO fast)
4. A bar with all your apps that you have come out of will be on the bottom of the screen
5. Hold down one of those apps
6. They will start to "jiggle"
7. A little red circle will be beside all of the "jiggling" apps
8. Press that little red circle and those apps will close (NOTE: This is NOT deleting your apps)
9. Now you apps are closed NOT deleted
10. Your iPod will now speed up in: Browsing, downloading, syncing and much more
11. (Bonus) - To DELETE an application do the same thing ( But not clicking the Home Button twice) and all of your apps which you downloaded will "jiggle" and there will be an black circle with an X in it, click that X to DELETE that app and a dialog will pop up and say: "Do you really want to delete this app?" If you want to: Click yes.
And that is how to speed up your iPod
Bonus) - is how to DELETE an App
Thank You,
Apple 5

I'm wondering if anyone else has had problems with their imac fans being extremely loud when running at slow speeds? When the computer heats up enough for the fans to run at higher speeds they quiet down. New HD fan was just installed.

I have an imac that I've had for a couple years. The fans have always been loud when running at the slower speeds. When the computer heats up enough for the fans to run at a higher speed the fans quiet down. I had installed SMC fan control after multiple attempts with Apple to get the fan issue resolved. That seemed to keep the fans quiet enough. I've never had a problem with overheating. Recently the fans were becoming loud again even running at the slightly higher speeds so I took it to my local Apple store and they replaced the hard drive fan. I got it back and it's now as loud or louder than ever!! And, now SMC fan control won't "stick." The fans will speed up, but then gradually go back to the lower "loud" levels. I'm at a loss as to what to do next.

Thanks jared,
I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

My Windows XP computer becomes extremely slow when I try using iTunes. It cannot connect to iTunes Store. I tried uninstalling and reinstalling iTunes but nothing changes. I cannot use iTunes or sync my iPod anymore. Please help.

I cannot use iTunes anymore. My computer becomes extremely slow or just freezes. I notice the problem started after I updated iTunes to a new version. I have tried uninstalling iTunes completely from my computer and installing it back, but problem continues. We iTunes launches, it tries to connect to iTunes store, but it doesn't seem to be able to do that either. I can't sync my iPod or play back my music, please help.

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

SOLVED: vfat filesystem suddenly becomes read only when running wine

I did a pacman -Syu (it's been a couple of weeks or so) and since then I have a very strange problem.
I have a vfat partition with World of Warcraft installed on it. It is mounted as:
/dev/sda10 /mnt/data vfat rw,noatime,user,umask=0000 0 0
When I run World of Warcraft with wine, suddenly I get errors of this type:
strongbad:home/brett> touch /mnt/data/Games/WoW/Interface/AddOns/blehe
touch: cannot touch `/mnt/data/Games/WoW/Interface/AddOns/blehe': Read-only file system
even though ls -l shows 777 permissions.
If I unmount and remount with mount -a, then I can touch files just fine... until I run WoW again.
I've scanned through recent package updates and nothing jumps out at me as a possible cause (wine for example hasn't been updated since February 25).
Anyone have any idea what might cause this? It's possible other things than wine do it, but it happens 100% of the time.
Last edited by vor_lord (2008-05-14 12:19:34)

This turned out to be a disk going bad after all. When certain corrupt sectors were accessed the disk went to read-only.

Bex selection screen does not appear when running workbook via RRMX.

Hi Experts,
I have following problem: When I run a BEx workbook from a user menu (trans. RRMX), I get no selection screen, but just the workbook with text: "no data found". When I press the refresh button (variable change button), the selection screen appears and after that the data are visible in the workbook. When I run the underlying query the selection screen appears normally. With some other workbooks with selections I do not have such a problem.
Anybody can give me a hint how to get the selection screen diplayed? We are on BI 7.1, Bex SP 10, patch 1.
Thank you,
Michal

Dear Michal,
Your Question:
Anybody can give me a hint how to get the selection screen diplayed? We are on BI 7.1, Bex SP 10, patch 1.
Answer:
Open the workbook and goto workbook setting from the analyzer design toolbar.
Check the Refresh workbook on check box.
So every time the selection screen will be appear after exectuion of the workbook.
Thanks & Regards,
Praveen.K

MacBook pro i7 quad is extremely sluggish when running CS5

I get a Beachball when performing simple operations in Flash CS5 on my brand new MacBook pro i7 quad. sometimes up to 5 minutes. Activity monitor shows one processor maxed during beachball. Very frustrating. Finder shows flash not responding until the beachball disappears. Also takes extremely long to open Adobe files. Running 10.6.7 Please help ! Thank you !

Hanan from New York wrote:
what is considered a "high" Swap Used?
I've never seen/heard a rule of thumb for that size, but the lower the better, higher is worse. A few MB is basically nothing. When you get up into GBs, that's noticeable. Dozens of GBs or higher is not good.
And this is your lucky night, you get to read about thrashing! Now doesn't that sound like fun?
http://support.apple.com/kb/HT1342
http://www.thexlab.com/faqs/lackofram.html
http://querieslinux.blogspot.com/2009/07/what-is-difference-between-swapping-and .html

Deploytool hangs when run on Win XP Home

Hello,
I'm trying working with the J2EE SDK on Windows XP Home Edition. I can start the j2ee server but when I try to run the deploytool the splash screen comes up but then it hangs. Does anybody know why this is happening?

I'm running XP, and I can start the DeployTool whether the server is running or not. I can't add the server if it's not running, but the message I get from the DeployTool when this happens is very clear.
(I ran Windows 2000 for years, and it was excellent, but XP is better, in my opinion.)
Now, as to why it's happening... Don't know, but my installation is new and clean, with the latest downloads from Sun. On yours, there are any number of reasons why things could go wrong... wrong Java, wrong libraries, etc., etc.
If this hapened to me, I would download fresh copies of Java stuff, make sure the environment was right, reboot, and give it another try...
Sorry I couldn't be more definitive...

Screen nice and bright when using power thru the adapter

Hi there
I am a new macbook user and I am wondering if this is 'normal'. I have two questions about the screen on my macbook.
When I use the macbook while it is plugged into the wall outlet my screen is nice and bright. If I unplug it, and the battery is fully charged, the screen dims. If I plug it back into to outlet the screen brightens. Is this "normal?"
Second question. If I am near a lamp or other light source my screen brightens. If the lamp is turned down to a dimmer setting, the screen on my mac dims. Is that normal?
I'm sorry if these questions sound ridiculous

Both of Your questions concern System Preferences, the first one You can set in Energy Saver, tag Battery.
The second You can control in System Preferences, Monitors panel.

My Mid-2011 Macbook Air becomes extremely hot when installing apps from the Mac App Store and when deleting apps

My Mid-2011 Macbook Air 13-inch (OSX 10.8.1 Mountain Lion) becomes hot to the touch when trying to delete large documents, watching videos after waking it from sleep-mode and when installing applications from the Mac App Store. This has also been happening with OSX Lion before I upgraded it to Mountain Lion.

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
What needed to be done the day that you set up the new Mac was go into the Mac App Store (MAS), sign into your iTunes/MAS Apple ID, go to the Purchases pane and Accept the iLife apps that would have been there in a special section. That would have sent you Mac's unique identifier code to Apple's servers and verified that this Mac was eligible for the bundled iLife suite and then registered these apps into your MAS account.
You might try going to ~/Library/Caches/com.apple.appstore/adoption.plist, delete the adption plist, restart the Mac and then go to the Purchaes pane and see if you can Accept the apps into your account.

ITunes 10.5 uses over 230,000K of memory when running on Win XP. Cpu ussage is maxed out at 100%. Why is this happening ?

on my laptop itunes is fine, it uses about 23,000k of memory,
and the itunes helper is not even an issue.
On my desktop running win xp itunes uses 230,000k of memory. I'm unable to run anything else.
I've already uninstalled and reinstalledand no change.
Can anybody help ??

Sounds like a problem with Excel, perhaps you have a Macro virus.
Download the free ClamXav and run a scan
http://www.clamxav.com/
Then uninstall and reinstall Office.
You can always use the free LibreOffice
http://www.libreoffice.org/download

Did anyone here had a problem with screen resolution or brightness when upgraded their ipad to ios7?

I had a mini ipad and upgraded it to ios7 last night. And when I woke up this morning the screen of my ipad had those lines like in an old black and white movies and I can't almost see the apps icons. It is almost a white screen. And after 5-10 minutes it statrted to be clear again. Did anyone had the same problem?

EilaJA wrote:
I then followed instructions for restore with my macbook air, but each time i tried, itunes told me either the ipad needed the passcode entered
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
EilaJA wrote:
...or it encountered and unknown error (9).
See Error 9 here > http://support.apple.com/kb/TS3694

Multiple Java Applets hangs when run on Win 2000 Pro SP4

I have a Java Applets which is used to connect to a remote element using server socket connections.
When I launch mulitple applets to connect to different elements on Win XP with SP2 OS using IE6 SP2 it works fine.
However ,the same I do in Win2K Pro SP4 with IE6 SP1 it doesn't work. In this case all the applets hung.
Does Java applet has platform specific problem? Any pointers regarding this problem highly appreciated.
TIA,...Sachin

Does anyone know if there is any bug creating socket connection from Windows 2000 pc with Service Pack 4?
Thanks in advance.
Biju

Jdeveloper10.1.3 auto exit when run client (Win server 2003)

hi all, i'm using Jdeveloper 10.1.3 on windows server 2003.
I have an ejb example, i deploy it on local server, it's ok
But whenever I run client, Jdev auto exits.
It runs ok on windows XP.
Can anyone help me? thanks

hi all,
i already found the answer. it's because i'm using NoAdware software.
just turn off Noadware whenever I use Jdev.
thanks all

Why has my Apple TV suddenly become extremely intermittent when it comes to wifi connection? HELP!

Hope someone can help,
Have read through some other discussions and nothing seems to have helped yet!
So basically what has happened since yesterday Apple TV 3 keeps losing connection to my wifi BT Homehub. Get finally connecting for a few minutes I managed to do the update so now on software 5.2.1. But still the Internet will not stay connected, have reset back to original settings, still losing connection, have reset the wifi box and still no change in connection! Not Ble to use an Ethernet cable at the moment but can anyone please help!
Oh and now Apple TV light is on but won't connect through the tv!!
What is going on?
Any advice will do
Thanks!

Take a look at this thread.
My new Apple TV cuts out periodically during TV and movies, and my serial number is DY*******RHN. Has this been recalled?
Hope this helps!
Eric

Screen becomes extremely bright when running on Win XP

Similar Messages

Maybe you are looking for