Screen becomes scrambled

Since the most recent update my Mac Pro's cinema 24 inch display becomes all scrambled when safari or any other browser is open. The issue is usually preceeded by some flickering of flash adds on any given webpage. If I shake the window, everything goes back to normal to re occur later on. The time for the event to reoccur varies and has become unpredictable. Restart, helps for a little while, but does not solve the problem. Since I have two monitors, I first thought it was either the monitor and or the video card. Now the issues has spread to the second monitor. Any ideas?

Using the Apple 24 inch on Mini DisplayPort and the Acer on a DVI -> HDMI cable leaves no room for blaming adapters for this problem.
Your display card could be the NVIDIA GT 120 or the ATI HD 4870, unless it has been replaced. Both have been well-behaved as far as we know.
If the same symptoms are starting to appear on a second screen, that could mean problems with the display card. If you can find your release DVDs, you should run the Apple Hardware test. It is on the DVD labeled, "To run Apple Hardware Test, startup up with this disc and hold the D key" or equivalent.

Similar Messages

  • Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!   What should I do?

    Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
    What should I do?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Have a problem with my MacBook Pro.5,3 and monitor.  Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.    The Apple icon, usually at top left corner, appears in to

    have a problem with my MacBook Pro.5,3 and monitor.  Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
    The Apple icon, usually at top left corner, appears in top right corner  in a strip including all that left hand.  When the computer is restarted, the screen goes back to normal.  But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
    It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode.   My large flat screen is relatively new.
    The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
    Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

    That sounds like a Hardware problem.
    You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

  • After installing itunes on my Dell 570 PC every icon on my screen becomes an itunes icon

    After installing iTunes on my Dell 570 PC every icon on the screen becomes an iTunes icon and which ever icon you select it becomes an iTunes page.  Help

    I also have an iPhone 4 with the newly downloaded iOS 5.  I have not been able to get the camera icon on the locked screen to appear at all.  I'd love to know how to fix it since this is one of the new features that I'd really like to use.

  • After recent upadte to firefox 9.0 beta 5 the screen becomes black for most part. Its like the pages and everything is working perfectly but it becomes black and flickers a lot.

    I m using win 7 home premium 64 bit edition. Yesterday night i updated the firefox to the latest 8.0.1 version and as soon as I open the window parts of the screen becomes black and starts flickering a lot. Can use everything on my laptop except browsers.Cant use it anyhow and also my internet explorer stops working when i try to download anything.

    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G, $99 for the other 4Gs, $99 for the 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
      Apple - iPod Repair price
    Sometime it takes a little while for the water to damage the iPod.

  • I want to fix my zoom for my iphone the screen becom bigger and i can not fix it again can anyone help please

    hi there /
    i want to ask that i was play with my  iphone for the zoom and i was missing control
    and the screen become bigger and i can not fix it again i want help please
    thank you
    samer form rotherham

    Hi, samer.  
    Thank you for visiting Apple Support Communities.  
    This sounds like you may have enabled the Zoom feature.  Here are the steps on how to disable this feature.  
    iOS: Home screen icons are magnified or large
    http://support.apple.com/en-us/HT203332
    -Jason H.  

  • Sometimes when downloading a .pdf file I'm not automatically switched to Acrobat reader, but the screen becomes white with a red borderline left and upper, IE doesn't have this problem

    The screen shows the borders of the original site. Beneath the Mozilla workbar the screen becomes white, on the left and upper side there appears a thin red line. Nothing is downloaded, clicking the right mouse button doesn't solve the problem. It doesn't happen everytime I try to load a .pdf file. When I go to the same site using Internet Explorer I do not encouter the same problem, swiching to Acrobat Reader or FoxIt is immediate.

    To enable this right you need Acrobat, not the free Reader.
    However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

  • The 'Brightness/Contrast' dialogue screen becomes unexplainably absent in PhotoShop 7.0 on XP

    About every year of so the 'Brightness/Contrast' screen becomes unexplainably absent while using my PhotoShop 7.0 in XP. When I click on 'Brightness/Contrast' the eyedropper becomes active as usual but the dialog screen with the two 'sliders' for brightness and contrast is not visible. Where is it? If I uninstall and reinstall it's OK again for a while.
    Bob Arens
    [email protected]

    It's not unheard of for dialogs to become lost off screen. It can happen
    when you reconfigure your display rez, or rearrange monitors.
    Before you re-install (assuming this happens again), try resetting your
    prefs by pressing the ctrl-alt-shift keys during startup.

  • Screen becomes non-responsive during calls

    Hello:
    I am having an occasional, but seemingly becoming more frequent, problem in which the screen becomes non-functional during calls. My immediate impression is of removing the phone from my ear to end a call and the screen not lighting up. Eventually, after I played with the buttons (which may or may not have really helped) the phone lit up. This has also happened when the phone was ringing, making it impossible to take the call.
    I am using the most current firmware, but believe the problem began with an earlier version. It just seems more frequent. I cannot reproduce the problem on demand.
    Ideas? Solutions?
    David

    The proximity sensor, which is what tells the phone to turn off the touch screen when the phone is against your face to prevent "cheek dialing", is located just above the ear speaker hole. Do you have a case or anything else on the phone that could possibly be blocking the sensor?
    -SB

  • Qosmio F10-121 while startup screen becomes striped with big purples stripes

    Hi !
    I suddenly had a problem with my Qosmio. Perhaps someone could help me.
    When I turn on my computer, the Qosmio logo appears (sound ok) and then, Windows logo. But here comes the problem, my screen becomes striped with big purples stripes. I can't do anything, it's totally unreadable... Windows can't be loaded, the Qosmio bips and reboot.
    When I plug an external screen, it's the same thing.
    I tried to use the restoration DVD, but for the instant, it changes nothing.
    I see 2 issues:
    - A video card problem (but Qosmio logo appears, and restoration DVDs menus are normal
    - A big HDD failure (when I plug the internal Qosmio's dd on my other computer, it's very, very slow, and suddenly, HDD disappears)
    So, if you have advices...
    Thank you very much for your answers, and don't look at the mistakes.
    Eric

    I reply myself to complete informations.
    I can't run the computer in qosmio mode. If my memory is good, I had only to use the tv little grey key when off. If i use the key, the computer shut on, but nothing on screen, caps lock is on.
    Other anormality: I wanted to use Kaella fro linux to see if the video card was ok, but I can't boot on the cd, even pressing C key at startup...
    I think he is dead. But I bought it only 2 years ago...
    Thank's.
    Eric

  • After installing itunes every icon on my screen becomes an itunes icon and no matter what you hit only the itunes page appears.

    I have a Dell 570 PC.  I use internet explorer and Yahoo.  When I finish installing iTunes every icon on my screen becomes an iTunes icon. No matter what icon I hit only the iTunes page appears.  Help

    Welcome to Apple Support Communities
    Your MacBook already comes with iTunes. What iTunes is telling you is probably to update it to the most recent version, so open  > Software Update, and install the most recent iTunes version, in this case, 11.0.4.
    Enjoy your new MacBook Pro

  • I use lion 10.7.2 and iPhoto latest version but when I export a slide show when I play it . It plays about half of the slide show and screen become white ? How can I solve it ? Is it bug or my computer problem

    I use lion 10.7.2 and iPhoto latest version but when I export a slide show when I play it . It plays about half of the slide show and screen become white ? How can I solve it ? Is it bug or my computer problem

    I would also like to know the answer to this. I am having the exact same problem.

  • Main Reader screen becomes overloaded and unweildly

    As I begin to load collections in the Library in preparation for moving them to a Memory Stick on the Reader, the Library main screen becomes populated with more and more titles making it increasingly difficult to find newly imported titles in the list so that they can be moved to collections.  Is there a way to delete books from the main screen which have already been placed in collections?  tks...
    Solved!
    Go to Solution.

    Hello
    Follow the below link to delete the books from the My Library section of the Reader for PC or Mac software.
    http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1025438
    To delete the books from the Reader or inserted memory card, follow the steps on the below link:
    http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1001245
    Regards,
    Colby

  • Imports from my memory card to Aperture have suddenly become scrambled, not in numerical, chronological or any order. Whats up?

    Imports from my memory card to Aperture have suddenly become scrambled. Not in numerical, chronological, or any order.

    Hi waynecook.  More information is needed in order to provide a helpful response.
    What settings are you using in the Import dialog?
    Can you sort the images once they are imported?
    Are they sorted/sortable in the Import dialog?
    Into what container are you importing them?
    Is your installation of Aperture and of OS X completely up-to-date?

  • My tabs randomly become scrambled and encrypted in what appears to be mandarin? What is going on???

    When I have my web browser open for some moderate time period, suddenly the "web-page tabs" become scrambled and have an overwriting text which appears to be Mandarin or Japanese. The red "close (x)" button on the tab as well as the plus (+) to open a new window page all come scrambled and out of alignment and/or hidden. If I close out my browser and clear all my internet data and reopen, things start normal again. But these symptoms are ALWAYS returning. It does not matter what webpage I am on. Even Google's search engine get's this "tab-scramble." ANY HELP? Is this a virus, worm, bug? I have Norton anitvirus and MacAfee Internet security, but they don't detect anything. And again, this occurs on any harmless site. I can email screenshots of these occurrences if it helps. Thanks for any suggestions!!

    Hello,
    Other users have solved this issue by disabling McAfee Site Advisor. Let us know if that works for you.
    * https://support.mozilla.org/en-US/questions/1027393

Maybe you are looking for

  • How to change the Speed of a Behavior on Text?

    I have applied some text to my layer and added 3 of the following behaviors to different text: Big Spin, fly in, Behind the camera. I have searched in the discussion and fooled around with the inspector, but I can't figure out a way to make these tex

  • Download interrupted, memory consumed but photos unavailable

    I had 4 GB of available memory on my iMac running OS X v10.7.4.  My camera had 3 GB of photos/videos so I downloaded my camera.  When the download was complete I had 0 memory left on my computer but the download appeared complete so I foolishly delet

  • Difference between Oracle 8i and 9i

    Hi, Can anyone suggest me what's the difference ( in sql and pl/sql) between Oracle 8i and 9i versions ??? What's the main feature of PL/SQL in Oracle 10g ??? Regards

  • How to save input from radio buttons into textfiles, Help

    Below is my code. Currently it gets the input from the textbox "Date" and places it into a textfile using "getText" How do i get the input from a radio button? i think getselected only works on JLists. String a = bookNo.getText();           out = new

  • My iq522 doesn't start and staying on start up screen without proceeding to boot process.

    HP IQ522PL Model No. NF369AA Windows Vista 64-bit No error message. No changes made to the computer/software before the problem occured. The problem is as described in the subject - the PC stays on start up blue HP screen and doesn't proceed into boo