Screen black and on buttom broken

please advise how i can get the black screen to turn on. My on button is broken. My phone is working because the phone rings when i call it

The only way possible requires functioning home AND lock buttons. Get the "button" repaired, or forget about this phone.

Similar Messages

When I scroll up or down on my screen, black and grey lines run across my screen and next to the scroll bar. How do it fix it?

When I scroll up or down on my screen, black and grey lines run across my screen and next to the scroll bar. How do it fix it?

it is possible that zoom maybe enabled i think double taping with three fingers should disable it.
or you can go into settings>general> assessability> zoom and turn it off.
hope this helps

My ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me

my ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me

- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again.

IPhone 4 screen black and white?

So, title might be a little misleading - I don't know, but my iPhone 4 has broken.
Basically, I can still hear it turn on etc, still hear when I get a message or a phone call and so on, and it vibrates when I put it on charge etc. What I'm trying to get across is the phone is 100% functional... except one thing.
The screen is black. That's right, black. It lights up a tad when you press the sleep button as you usually would to get into the phone, which makes me think the LED's are still working and connected.
Oh, also, this just happened when I picked up my phone one time. Just black out of nowhere.
What I've tried:
Recovering phone (Phone wont recover for unexpected error).
Holding down home and power button for 10 seconds (only worked once out of about 100 times, where the Apple logo showed up, then the screen faded to white then went from white to black and the phone was off again).
Opening the back of phone to see if a connector has come loose (It hasn't).
So, basically, if anyone could help I'd be extremely grateful.
Thank you.

Hi,
What do you mean?
I have no warranty as it ran out ages ago, so I can't send it in either.
Thank you.

22DL704B screen black and white but setting guide in colour?

The screen has turned completely black and white even when I try the dvd option but when I click the settings up they come up in colour what could be wrong?

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
- Peter

Make iMac screen Black and White

I have a 3.06 ghz imac running Leopard. I want to make the monitor show black and white (like greyscale back in the day). How do I do that? I've discovered different profiles under the Monitors CP. Thanks!

LMAO!!! perfect haha!! thanks heaps matt. I saw the screen black/white to the left of the greyscale checkmark but totally didn't see that till you mentioned it LOL. Thanks!

Macbook air locks up instead of standby. Cannot wake with screen black and no sound. Have to hold power button for total restart. Happened with Mountain Lion and Maverick

I've had this issue since first buying my MBA mid-2013. Instead of going to standby, which works 98% of the time, every now and again it appears to go into standby with the screen black, but no amount of key pressing or mouse moving will wake it up. I am forced to hold down power button for a manual restart and faced with losing work. This problem has occured whilst using Mountain Lion and still occuring since updating to Maverick.

GoreLeech wrote:
Hello,
Having searched high and low, I can't seem to find a solution to my predicament.
Sun Feb 13 20:50:44 2011
panic(cpu 0 caller 0x9f8bfa): NVRM[0/1:0:0]: Read Error 0x00000100:
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Hi there, GoreLeech,
as per above extract from your error log, you have experienced a kernel panic due to problems with your Nvidea GeForce GT 330 M graphics card that has a 256 MB memory.
This may be due to the card not having enough memory for what you are doing, the only thing, I can suggest here is to call Apple, and get the machine checked out. You can run the Apple hardware test at home but I'd recommend getting it booked in with Apple. What is worse: A computer that randomly malfunctions, or doing without it for up to one week (often they repair it within a day!)?

I had a download on my angry birds game and now it does not work just turns screen black and then goes back to normal

my angry birds showed an update so i did, when it finished i cannot play it now, when try to play the welcome screen comes up and then after a few seconds turns black and then the phone returns to normal

I suggest taking it back to Best Buy. Once it has been opened, Apple will not handle the phone. Best Buy or another 3rd party are your only choices. Best Buy probably made an error when replacing the screen. Understand they are not an authorized Apple Service Center.

Iphone start up screen black and white stripes

My iPhone 4S powers up with a black and white striped screen then goes black. If I do a reset, it will eventually come back, work properly, and then go black again. When plugged into power, with screen set never to sleep, it works.

That's a sign of a hardware fault.
make an appointment at the genius bar and have it looked at.

Macbook Pro....what would cause it to turn the screen black and restart on its own. Message after it restarts says restarted due to problems.

Macbook Pro...my screen goes black and it restarts itself. The message after it restarts says "restart due to problems" Any ideas what I should do or look for? It randomly happens and is becomeing more frequent.

kernel panic http://support.apple.com/kb/ts3742

Playbook screen Black and white with no color or just black with faded white lines

My playbook has been acting up lately and need to know where to send it for repair. The issue is the screen goes blank or black and white (losing color) and after pushing the power button several times the color comes back. After fight that issue several times its gotten to the point the screen is black with very faded white lines on the screen and nothing is working to get it working again. I have tried several times to shut it off and start, but still the same issue.
Thanks,

will do, thanks

Why is my ipod touch screen black and when i try to turn it on it won't turn on ?

i was listening to my ipod last week and it went dead , so i plugged it in to my laptop to charge it & to download some songs , the icon that shows its charging didn't come up so i left it in for an our or 2 but my computer still detected the ipod & itunes came up straight away, so wen i went back to it it still wasn't charged so i tried to turn it on the screen went white for a few seconds and ten back to black , my ipod still won't come on. anyone ave any idea's?

Sorry to hear that you're having problems. Tried a restore with iTunes? If not try it and it should work. If this does not work, take it to your local applestore as ths COULD (not saying it is definately) be a Hardware issue.
Hope this helps, Let me know hoe you get on!
~Naomi

IMac Sleep Problem Waking - Screen Black and Pixelization

I am having a screen problem "waking" my iMac (2010 model)
After the iMac is in (deep?) sleep mode
(I have it set to enter a password after sleep mode)
Screen is blank/off
I "wiggle" my mouse or trackpad
Screen is still blank (sometimes it may display my screen saver, but the screensaver is frozen)
If I start moving the mouse or trackpad, it starts "un painting" the black screen. You can see whatever is supposed to be on the screen, such as the logon "button".
It is really wierd. Like a black "overlay" is painted on the resume from sleep screen. As I move my mouse or trackpad, it is basically erasing the black, to show what is underneath. Each movement of the mouse, erases a small black square.
I usually move my mouse around the middle of the screen to uncover the logon button. Press the logon button. The screen magically reappears as normal. I enter my password and system logs back on normally.
It only seems to be when the iMac is in (deep?) sleep mode. If the screen is just blank for short time: I move the mouse/trackpad, and the logon screen is immediately displayed normally.
Any thoughts or recommendations?
There is a few other treads on this issue e.g. on the macrumors site, but no solutions.
Thanks to all in advance.
--john--

Hi! When you say "the power light goes off once again" are you talking about the power light on the monitor or the computer? If it's on the computer then it's likely the computer but if it's the monitor it could be the monitor or the video card. You may have to find another monitor to troubleshoot it. Tom

PBG4 Titanium Onyx - Screen black and sleeps when display moved slightly

My PowerBook G4 has been going to sleep when I do any of the following:
1) Move the display — _every time_
2) Touch the lower row of keys on keyboard — sometimes
3) Bump the computer — _most of the time_
Sometimes when I try to wake it from sleep, the sleep light will stop "breathing," but the screen is still black, although I can see a very faint image. (...my forum research has told me this is the backlight turning off). A slight movement of the display will bring the backlight back on, but of course the PB goes to sleep.
I have reset the PMU and the PRAM.
I am hoping that the backlight problem is associated with the sleep problem, and one fix will solve them both, but I guess that goes without saying.
Would prefer to fix it myself rather that take it to a repair shop; I am fairly adept at repairs, but don't want to get in over my head.
Thanks Forum Gurus!

*+It WAS!+*
It was a classic case of the Orange Ribbon Cable Issue/Fix.
I was discouraged at first because the addendum to your article suggested that this did not apply to the *_550 MHz TiBook_*. But the ribbon looked the same as your pictures, and when I looked at the ribbon +with a loupe+, I could see where the insulation was worn away. I put tape everywhere I could fit it and the PB is working fine. I can totally move the display and pound on the keys with impunity. (I use the word "pound" figuratively, of course).
Now that I know how to remove the bottom case and the HD, I am definitely going to replace the HD.
Do you know what the best and most capacity HD I can install?
Thank you abundantly for your expertise and that very helpful website.
Cheers,
Paul

Screen black and now in recovery mode

Hi i need some help, my iphone dropped out of my pocket and was still functioning and making noises but the screen is totally black, I read some forums and tried holding the power and lock buttons at the same time for 15secs its now in recovery mode, help please i dont want to totally restore and loose all my stuff, it wants me to put the password on the screen to backup but i cant see anything on the screen

Tuctuckrob wrote:
.. its now in recovery mode,.
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Screen black and on buttom broken

Similar Messages

Maybe you are looking for