Screen Black and Safari Still Hangs!!

This is getting to be a real pain... Here we are , keeping up to date with all the latest Leopard
updates and still screen brightness resets to 0 after waking from sleep or powering up
and safari takes longer to launch in Leopard. I can honestly say and remember now that Tiger and Safari were fast launching. Flying really.
Any help is much appreciated !! thanks / alexis

Tuctuckrob wrote:
.. its now in recovery mode,.
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here  >  http://support.apple.com/kb/HT1808
You may need to try this More than Once...  Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup  >  http://support.apple.com/kb/ht1766

Similar Messages

  • My ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me

    my ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me

    - Try a reset.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then connect to your computer and try to restore.
    - See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again.

  • Since installing yosemite my computer/screen blacks out, but still running

    Since installing yosemite last week, my computer/screen blacks out, but still running. I have since rebooted everything, started from scratch and utilizing my external drive transferred all files/apps back. Did not help, in fact it is getting worse. Computer screen blacks out every 5 min or so and have to power up again. Also, continue to get Java message updates even after all have been updated over and over again. Any suggestions? Thanks!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • When I scroll up or down on my screen, black and grey lines run across my screen and next to the scroll bar. How do it fix it?

    When I scroll up or down on my screen, black and grey lines run across my screen and next to the scroll bar. How do it fix it?

    it is possible that zoom maybe enabled i think double taping with three fingers should disable it.
    or you can go into settings>general> assessability> zoom and turn it off.
    hope this helps

  • Iphone 4s screen black but is still on. Tried reset, can not turn off Find my phone because i have a passcode

    iphone 4s screen black but is still on. Tried reset, can not turn off Find my phone because i have a passcode

    dont you know your apple ID password ?
    IF you know that, try restart your iPhone if it doesnt work try restoring your device. If it doesnt work again, you have hardware problem. Try changing your screen.

  • HT4623 e while updating iOS. When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    iPad 2 froze while updating iOS 7.0.4.  When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    Sorry if we didn't get to your question fast enough; we are all volunteers doing this in our spare time. Try the steps in this article. If you're unsuccessful, you'll need to take your device to the Genius Bar for an evaluation.
    http://osxdaily.com/2010/12/04/ipad-dfu-mode/

  • Safari Still Hanging and Stupid Screen Black from Sleep!!

    This is getting to be a real pain... Here we are , keeping up to date with all the latest Leopard
    updates and still screen brightness resets to 0 after waking from sleep or powering up
    and safari takes longer to launch in Leopard. I can honestly say and remember now that Tiger and Safari were fast launching. Flying really.
    Any help is much appreciated !! thanks / alexis

    Hi, this article claims to have a fix.
    <http://www.macosxhints.com/article.php?story=20060619130339144>
    Ray

  • I accidentally dropped my iPad but it didn't crack the screen just went totally black and it still turns off and on but it's just black and I can't do anything. I need help I don't  know what to do

    I accidentally dropped my iPad but it didn't crack. It just went black and I tried turning it on and off and it works but it just stays black and I don't know what to do I desperately need help.

    I could not believe it, but it worked. If you have this problem, Here's my word to you: Don't give up! I tried this "magical" fix three times last night. Nothing (...x3!). Then, today I put it upside down on my ottoman and hit the back quite hard. I have no idea how this works and - even a s a scientist - I don"t care! My iPad is up and running again. Go figure... but I am thrilled!!! Thank you, forum. I never would have thought of this on my own. And you just saved me several hundred $$$!

  • Why is my ipod touch screen black and when i try to turn it on it won't turn on ?

    i was listening to my ipod last week and it went dead , so i plugged it in to my laptop to charge it & to download some songs , the icon that shows its charging didn't come up so i left it in for an our or 2 but my computer still detected the ipod & itunes came up straight away, so wen i went back to it it still wasn't charged so i tried to turn it on the screen went white for a few seconds and ten back to black , my ipod still won't come on. anyone ave any idea's?

    Sorry to hear that you're having problems. Tried a restore with iTunes? If not try it and it should work. If this does not work, take it to your local applestore as ths COULD (not saying it is definately) be a Hardware issue.
    Hope this helps, Let me know hoe you get on!
    ~Naomi

  • Reveresing black and white still Photoshop image in FCP?

    is it possible to reverse the black and white of a still photoshop image within FCP? then remove the background apart from the letters?
    need to get a black and white company logo into FCP for use in the credits of this programme - due to a graphic designer being away i've had to scan the image off letterhead! very backwards and not ideal I know - but its a bit of a emergency so any pointer very much appreciated...

    Drag and drop your image from the viewer to the timeline, lets say in V2.
    Right click the logo clip>go to composite mode>select screen.
    That's it. You now have the white text with no black background and whatever is in V1 replaces the black.
    G.

  • Macbook air locks up instead of standby. Cannot wake with screen black and no sound. Have to hold power button for total restart. Happened with Mountain Lion and Maverick

    I've had this issue since first buying my MBA mid-2013. Instead of going to standby, which works 98% of the time, every now and again it appears to go into standby with the screen black, but no amount of key pressing or mouse moving will wake it up. I am forced to hold down power button for a manual restart and faced with losing work. This problem has occured whilst using Mountain Lion and still occuring since updating to Maverick.

    GoreLeech wrote:
    Hello,
    Having searched high and low, I can't seem to find a solution to my predicament.
    Sun Feb 13 20:50:44 2011
    panic(cpu 0 caller 0x9f8bfa): NVRM[0/1:0:0]: Read Error 0x00000100:
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
    Hi there, GoreLeech,
    as per above extract from your error log, you have experienced a kernel panic due to problems with your Nvidea GeForce GT 330 M graphics card that has a 256 MB memory.
    This may be due to the card not having enough memory for what you are doing, the only thing, I can suggest here is to call Apple, and get the machine checked out. You can run the Apple hardware test at home but I'd recommend getting it booked in with Apple. What is worse: A computer that randomly malfunctions, or doing without it for up to one week (often they repair it within a day!)?

  • IPhone 4 screen black and white?

    So, title might be a little misleading - I don't know, but my iPhone 4 has broken.
    Basically, I can still hear it turn on etc, still hear when I get a message or a phone call and so on, and it vibrates when I put it on charge etc. What I'm trying to get across is the phone is 100% functional... except one thing.
    The screen is black. That's right, black. It lights up a tad when you press the sleep button as you usually would to get into the phone, which makes me think the LED's are still working and connected. 
    Oh, also, this just happened when I picked up my phone one time. Just black out of nowhere.
    What I've tried:
    Recovering phone (Phone wont recover for unexpected error).
    Holding down home and power button for 10 seconds (only worked once out of about 100 times, where the Apple logo showed up, then the screen faded to white then went from white to black and the phone was off again).
    Opening the back of phone to see if a connector has come loose (It hasn't).
    So, basically, if anyone could help I'd be extremely grateful.
    Thank you.

    Hi,
    What do you mean?
    I have no warranty as it ran out ages ago, so I can't send it in either.
    Thank you.

  • Playbook screen Black and white with no color or just black with faded white lines

      My playbook has been acting up lately and need to know where to send it for repair.  The issue is the screen goes blank or black and white (losing color) and after pushing the power button several times the color comes back.  After fight that issue several times its gotten to the point the screen is black with very faded white lines on the screen and nothing is working to get it working again.  I have tried several times to shut it off and start, but still the same issue.
       Thanks,

    will do, thanks

  • Screen black and now in recovery mode

    Hi i need some help, my iphone dropped out of my pocket and was still functioning and making noises but the screen is totally black, I read some forums and tried holding the power and lock buttons at the same time for 15secs its now in recovery mode, help please i dont want to totally restore and loose all my stuff, it wants me to put the password on the screen to backup but i cant see anything on the screen

    Tuctuckrob wrote:
    .. its now in recovery mode,.
    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • 22DL704B screen black and white but setting guide in colour?

    The screen has turned completely black and white even when I try the dvd option but when I click the settings up they come up in colour what could be wrong?

    That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
    - Peter

Maybe you are looking for

  • Business Area control

    We are using Business area control for the reporting of Balance sheet items per business area. Usually we will use the field status group code to assign to the GL Acct master (FSS0) to control that the account has to fill up the Business Area code as

  • Vendor list sort by name

    dear experts, do you know how to make a list of vendor (active and non active) sorted by name? moreover, do you know the differences of blocking vendor and flag the vendor for deletation, and the how to delete vendor master data? regards, Lily

  • Will BT return to my area to install Fiber now tha...

    Three years ago BT Infinity was being rolled out in my area, it was pretty extensive overall and lots of houses were connected, cabinets changed etc. Unfortunately for me this was at the same time as a road resurfacing for the main road connecting my

  • How do you fix the problem "start up disk is full"?

    My brand new macbook pro keep freezing on me.  I get a notice that tells me: "start up disk is full, force quit open applications", I begin to hear the fans and then I can't even close what is open because completely freezes.  I have 500GB of flash d

  • OSX 10.7 Lion - upgrade OSX 10.6 or fresh Install?

    Can OSX 10.7 Lion be downloaded to a DVD to use as a start up disc or is it possible to buy one? Is it true that fresh install of OSX 10.7 lion (that apparently is possible somehow) 'better' than an upgrade online from apple store