Screen blanking and won't restore (solved)

Since the last update from testing (kernel 25.3) if I leave and the screensaver should start, the screen goes dark and the monitor doesn't turn off. The only way to fix it is to reboot. ??
If I run xscreensaver-demo the screen also freezes.
Last edited by normc (2008-05-14 01:22:56)

Allan wrote:Using nvidia? Apparently it has issues with.2.25.3/
That was the problem. I updated to the latest nvidia from testing and it cured the problem.:D
Last edited by normc (2008-05-13 16:24:39)

Similar Messages

  • IPhone screen blank and won't turn on/off

    I went to the camera app from the lock screen and the app seemed to freeze, so I pressed the home button. The screen went blank and now won't turn on. Oddly, when I plugged it into iTunes on the computer, I was able to sync, and I can get Siri by holding the home button. Also the phone will ring if called, but I cannot answer it. Please help.
    iPhone 5S. Just installed latest iOS update yesterday. Never had any problems before.

    Try restarting or resetting your phone. You won't lose any data.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support

  • Iphone 5c has a black screen, beeps, and won't restore

    My iPhone 5c has a black screen. It is charging at the moment, but when it is charging it beeps....constantly... I have tried the home + lock button restoring thing and no apple logo shows up. I don't know what to do HELP!

    I said "may" because Apple may determine the fault was due to abuse such as a drop or water damage. I am in no position to say for certain there is warranty on any device except my own.

  • My IPAD went blank and won't restart...and ideas?

    My IPAD went blank and won't restart...and ideas?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Just updated ipod touch to ios6 ipod crashed and won't restore

    just updated ipod touch to ios 6. ipod crashed and won't restore just flashing screen black to white help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Using iPad2 (e.g. using safari) and screen blanks and apple logo appears.  Happened 3x today.  Does this mean my iPad2 is defective?  Thanks from a novice

    My iPad2 recently started to what appears to be a reboot - screen blanks and Apple logo appears.  It has happened 3 times today with the screen just remaining 'blank' for several minutes before the logo appeared.  Any ideas???  Do I have a defective iPad2?  Any help appreciated.

    If it were me, I would back up the ipad, restore it to the factory settings and then restore it from the backup.
    That will give you back your settings and data, but will hopefully eliminate whatever is funky with the OS.

  • IPhone 4 crashed during ios update (5.0.1) and won't restore. anyone know how i can get my iPhone working again?

    iPhone 4 crashed during ios update (5.0.1) and won't restore. anyone know how i can get my iPhone working again?

    Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. See http://support.apple.com/kb/HT1808 for details.
    Then you can restore your phone: http://support.apple.com/kb/HT1414

  • "Organize Bookmarks" is blank and won't operate after a system Defrag. What file is corrupt? I have version 2.0.0.2

    "Organize Bookmarks" is blank and won't function after a system disk Defrag. I have version 2.0.0.2 I don't want to upgrade. Where can I get an copy of this version to reinstall?

    Get it from here:
    [ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]

  • I'm now showing I have 9 updates in the App Store but when I click on updates it is blank and won't load. Tried to reset but didn't help. What now?

    I'm now showing I have 9 updates in the App Store but when I click on updates it is blank and won't load. Tried to reset but didn't help. What now?

    Try again later today or tomorrow. Other users are posting the same issue >  Apps update not working. Was before but...: Apple Support Communities
    The problem has been reported to Apple.

  • New 5s keeps saying "connection to server failed " and won't restore - ideas how to fix? Thx

    New 5s keeps saying "connection to server failed " and won't restore - ideas how to fix?

    Other users have been reporting Yahoo mail problems that are not iPad problems. Might be something to try on these links.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try a Reset - iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    Or this - Delete the account in Mail and then set it up again.
     Cheers, Tom

  • My Iphone is in recovery mode and won't restore, what do I do?

    My Iphone is in recovery mode and won't restore, what do I do?

    Hi ...
    Try here > iOS: Unable to update or restore
    Cute user name 

  • Ipad 4 gone blank and won't reboot

    My ipad 4 just went blank and won't reboot or anything, it was fully charged when it stopped working

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • IPhone 6 stuck in red screen starting loop and won't restore.

    Ok, so i've been using my iPhone 6 happily since release day, the only problem I had was a flickering white line at the bottom of the screen while browsing certain webpages and using certain apps. It got to the stage where it was annoying me enough to make me contact apple support. The advisor told me to reset my settings and that should fix the problem... It didn't, it has just made things a whole lot worse! My phone failed to restart after resetting my settings, and has been stuck in a startup loop ending with a red screen for about an hour now. I tried a hard reset with no luck, and now I've just tried restoring it using iTunes, but the restore process says it will take 25 HOURS! ..After about five minutes, and while still connected to iTunes, my phone started going back through the red screen loop and the restore looks like it won't do anything. Please help! I tried to contact apple live chat again, but conveniently it's not available at this moment...
    Cheers,
    Matt

    yes, just to say a big thank you to Apple ...realizing today while browsing these forums that I haven't been the only one. Happened to me when I updated from 8.1.2 to 8.1.3 OTA... device (iPhone 4s) stuck in recovery mode ... how nice, this has never ever happened to me after years of using iOS, whether I updated OTA or via iTunes, never. I was then delighted to experience the restore process ... wasted hours doing that thanks again ! (I have many apps and a big backup so...). Seriously, this is unacceptable.

  • Ipod touch 2G is black screen and won't restore in Itunes (error 21)

    I have aquired an Ipod touch 2g 16g that I was hoping to make a present to my daughter with.  The device is I guess what is called "Black Screen of Death".  I can't get any image to display on the Ipod when trying to charge (which it apparenlty accepts) the item or when trying to connect it to Itunes.  Itunes recongizes the item in recovery mode, and attempts to restore the item and consistantly gives the error 21 message.  I am using Windows 7 and have tried to restore the device on a laptop running Win XP with the exact same results.  The screen will turn white during the process, and the machine will from what I have read and believe go into DFU mode, but it stops with error 21.  I am a Noob and have googled and googled for a week now with no luck.  I have tried the reinstallation of Itunes, all the updates to both Itunes and the machine, no security software, the works.  I tried connecting it to older son's laptop running Win 7 which he uses for his Ipod 2g 32 gig without problems.  My device was recognized on his machine, and he said on his Itunes he briefly saw songs on the device he did not have on his machine/device in his library before it hung again in the recovery mode loop.  I have read different articles and tutorials on jailbreaking and tried loading just the 'oem" firmware from apple with Redsnow and thought i was successful.  The device went through the process of white screen, several boots/dings of on my PC, and then an image appeared on the Ipod of "loading Jailbreak data".  After a few moments/minutes it then began what I believe is displaying the "verbose" booting running the lines of text on the screen.  I then notice it to stop and give me an error of something to the affect of init failed, and then a "lan error, watchdog timeout, giving up, a long pause, then quick scrolls down the screen and reboot back to white screen.  Holding the power button or home/power button puts it right back to a black screen and in the Itunes recovery mode loop/error 21 again.  Can anyone please help me resolve this issue before I pull what's left of my hair out.  I would love to get this working for my daughter before her birthday.  Thanks in advance to anyone who helps.

    Common, no one has any ideas?  Well, don't know if this will help, but here's some new data to process.  I noticed that when I was trying to load the firmware with Redsnow w/o installing any options to include Cydia I got errors displayed on the Ipod such as WMR NAND format invalid; NANDLegacyFTL failed.  Someone has got to know something.  I would appreciate any ideas or thoughts from anyone with any idea.  Thanks

  • Screen is blank and won't connect to computer

    My 120gb Ipod classic screen went blank during play back of a song when i was trying to skip back to the start of the track. The screen remained blank and all controls (ie. menu, pause etc) did nothing. The song played to the end then; nothing. The battery should have been full as i had previously been playing it on a dock which charges it, then when I connected it to my mac book it didn't appear in itunes or on the desktop. I left it for about 4 hours to see if charging it would help but still nothing.
    Any suggestions?

    Have you tried to Reset the iPod -
    Toggle the HOLD switch, make sure you don't see any red at the switch.
    Press Menu and Center button for about 10 secs till the Apple logo comes ON, then select your prefered language.
    If you are on Mac, then the problem is not iPod resource hogging by the Antivirus.
    Yours is most probably hardware due to a dying iPod Hardisk or Battery.
    Battery
    On standalone, (not using the iPod docking station)  how long does the battrey last? Should be 36 hours on full charge, when new, but if it has been on the Docking station for 2 years, the battery would be at its max recharge cycle, and would last a few hours only or less.
    Hardisk
    Here is a link on doing disk diagnostic posted by tt2.
    https://discussions.apple.com/thread/2362776?start=0&tstart=0
    For hardware issues like battery or hardisk, the community can't help you, so you got to bring it in to Apple or 3rd Party vendor for hardware replacement.
    Have a nice day!

Maybe you are looking for

  • My MacBook Pro is REALLY slow after a week of running Yosemite perfectly

    I have a MacBook Pro (about 3 years old) and I have never had any problems with it. When Yosemite was released I updated and my MacBook ran perfectly and faster then before for a little over a week. Then all of a sudden it became SO incredibly slow.

  • Re: Write - Up Unplanned Depreciation

    Hi All, I tried to write up the Unplanned Depreciation using Transaction Code.ABZU Am getting an Error : You Cannot Post Write- ups You cannot post write-ups Message no. AA402 Diagnosis None of the areas to be posted in accordance with the transactio

  • Working of Active Data Cache

    Hi, I have installed BAM and started working on it. I wanted to know how actually the ADC works. Whether it stores its Active Data in RAM (of local machine) or in Oracle DB? If the Data is in Database then how the Event Engine monitors the change in

  • Transaction codes used to find the table(s), query/queries, and joins.

    Hi. I would like to learn how to find out which table(s) to use to create a query(ies), how tables are joined and how to create a query. Besides SQVI and SE16, what other transaction can I access? I would like to use SAP query tools that requires no

  • Standard frame rate for 1080p NTSC?

    Hello and thanks for having me! Very new(b) to Adobe Premier, so I'll throw something basic out, thanks for your advice: the short version: What is the 'standard' framerate for NTSC 1080p? Does this framerate differ from what you would use for output