Screen Blanks (ACPI) on VivoBook after upgrade
When I boot normally, I get to select my GRUB option, type my password for my encrypted partition, and then then screen goes blank and stays blank. I have found that if I plug in a VGA cable the monitor will show a prompt to login, and I can start X just fine but I can never get the first screen to work.
When I append "acpi=off" to the kernel options, I am able to boot just fine and get into X on the main laptop screen. But then, I can't get any external monitors working such as VGA or HDMI and the touchpad refuses to work (although confusingly, the touchSCREEN works fine). This helps in the short term but isn't really a solution.
I've tried kernels 3.12.6-1, 3.12.7-1, and 3.12.8-1 to no avail.
Hardware is VivoBook S400C, intel graphics.
Any ideas?
dmesg acpi=off
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ccbbbe3b-d361-44e8-b93a-f7c790aaf561 cryptdevice=/dev/sda6:root root=/dev/mapper/root resume=/dev/sda5 ro
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d973bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d973c000-0x00000000d973cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d973d000-0x00000000d9749fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d974a000-0x00000000d9d4afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d9d4b000-0x00000000d9d4dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9d4e000-0x00000000d9d65fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9d66000-0x00000000d9d66fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9d67000-0x00000000d9d67fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9d68000-0x00000000d9d6dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9d6e000-0x00000000d9d6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9d70000-0x00000000d9d79fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9d7a000-0x00000000d9f0ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9f10000-0x00000000d9f13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9f14000-0x00000000d9f5dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9f5e000-0x00000000d9f64fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9f65000-0x00000000d9f66fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9f67000-0x00000000d9f85fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9f86000-0x00000000d9f88fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9f89000-0x00000000d9f8afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9f8b000-0x00000000d9fa1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9fa2000-0x00000000d9fa7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fa8000-0x00000000d9faffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9fb0000-0x00000000d9fb0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fb1000-0x00000000d9fbffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9fc0000-0x00000000d9fc0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fc1000-0x00000000d9fcbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9fcc000-0x00000000d9fd0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fd1000-0x00000000d9feffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9ff0000-0x00000000d9ff1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9ff2000-0x00000000da006fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da007000-0x00000000da007fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da008000-0x00000000da019fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da01a000-0x00000000da040fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da041000-0x00000000da054fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da055000-0x00000000da055fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da056000-0x00000000da056fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da057000-0x00000000da058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da059000-0x00000000da059fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da05a000-0x00000000da05efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da05f000-0x00000000da073fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da074000-0x00000000da61bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da61c000-0x00000000da89bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da89c000-0x00000000da8a0fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da8a1000-0x00000000da8a1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da8a2000-0x00000000da8e4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da8e5000-0x00000000dacfcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dacfd000-0x00000000daff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daff4000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbc00000-0x00000000dfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. S400CA/S400CA, BIOS S400CA.206 11/28/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DBC00000 mask FFFC00000 uncachable
[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 11F400000 mask FFFC00000 uncachable
[ 0.000000] 7 base 11F200000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff8800000fd7b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11f000000-0x11f1fffff]
[ 0.000000] [mem 0x11f000000-0x11f1fffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11effffff]
[ 0.000000] [mem 0x11c000000-0x11effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xd973bfff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xd95fffff] page 2M
[ 0.000000] [mem 0xd9600000-0xd973bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd973d000-0xd9749fff]
[ 0.000000] [mem 0xd973d000-0xd9749fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9d4e000-0xd9d65fff]
[ 0.000000] [mem 0xd9d4e000-0xd9d65fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9d67000-0xd9d67fff]
[ 0.000000] [mem 0xd9d67000-0xd9d67fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9d6e000-0xd9d6ffff]
[ 0.000000] [mem 0xd9d6e000-0xd9d6ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9d7a000-0xd9f0ffff]
[ 0.000000] [mem 0xd9d7a000-0xd9f0ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9f14000-0xd9f5dfff]
[ 0.000000] [mem 0xd9f14000-0xd9f5dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9f65000-0xd9f66fff]
[ 0.000000] [mem 0xd9f65000-0xd9f66fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9f86000-0xd9f88fff]
[ 0.000000] [mem 0xd9f86000-0xd9f88fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9f8b000-0xd9fa1fff]
[ 0.000000] [mem 0xd9f8b000-0xd9fa1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9fa8000-0xd9faffff]
[ 0.000000] [mem 0xd9fa8000-0xd9faffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9fb1000-0xd9fbffff]
[ 0.000000] [mem 0xd9fb1000-0xd9fbffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9fc1000-0xd9fcbfff]
[ 0.000000] [mem 0xd9fc1000-0xd9fcbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9fd1000-0xd9feffff]
[ 0.000000] [mem 0xd9fd1000-0xd9feffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9ff2000-0xda006fff]
[ 0.000000] [mem 0xd9ff2000-0xda006fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xda008000-0xda019fff]
[ 0.000000] [mem 0xda008000-0xda019fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xda041000-0xda054fff]
[ 0.000000] [mem 0xda041000-0xda054fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xda056000-0xda056fff]
[ 0.000000] [mem 0xda056000-0xda056fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xda059000-0xda059fff]
[ 0.000000] [mem 0xda059000-0xda059fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xda05f000-0xda073fff]
[ 0.000000] [mem 0xda05f000-0xda073fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xda8a1000-0xda8a1fff]
[ 0.000000] [mem 0xda8a1000-0xda8a1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xda8e5000-0xdacfcfff]
[ 0.000000] [mem 0xda8e5000-0xda9fffff] page 4k
[ 0.000000] [mem 0xdaa00000-0xdabfffff] page 2M
[ 0.000000] [mem 0xdac00000-0xdacfcfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdaff4000-0xdaffffff]
[ 0.000000] [mem 0xdaff4000-0xdaffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x375a8000-0x37acbfff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000da86e090 000AC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000da880040 0010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000da86e1d0 11E6F (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000da899080 00040
[ 0.000000] ACPI: APIC 00000000da880150 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000da8801c8 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 00000000da880210 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 00000000da8802d8 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000da880318 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da880d58 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da881a00 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da881a98 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
[ 0.000000] ACPI: HPET 00000000da8823b8 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000da8823f0 0049A (v01 AhciR1 AhciTab1 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da882890 0049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da882d30 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000da8835b8 00B18 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000da8840d0 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000da884188 000D0 (v01 Iffs IffsAsl 00003000 INTL 20051117)
[ 0.000000] ACPI: MSDM 00000000da61be18 00055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11f1fffff]
[ 0.000000] NODE_DATA [mem 0x11f1f2000-0x11f1f6fff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a800000-ffff88011e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11f1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xd973bfff]
[ 0.000000] node 0: [mem 0xd973d000-0xd9749fff]
[ 0.000000] node 0: [mem 0xd9d4e000-0xd9d65fff]
[ 0.000000] node 0: [mem 0xd9d67000-0xd9d67fff]
[ 0.000000] node 0: [mem 0xd9d6e000-0xd9d6ffff]
[ 0.000000] node 0: [mem 0xd9d7a000-0xd9f0ffff]
[ 0.000000] node 0: [mem 0xd9f14000-0xd9f5dfff]
[ 0.000000] node 0: [mem 0xd9f65000-0xd9f66fff]
[ 0.000000] node 0: [mem 0xd9f86000-0xd9f88fff]
[ 0.000000] node 0: [mem 0xd9f8b000-0xd9fa1fff]
[ 0.000000] node 0: [mem 0xd9fa8000-0xd9faffff]
[ 0.000000] node 0: [mem 0xd9fb1000-0xd9fbffff]
[ 0.000000] node 0: [mem 0xd9fc1000-0xd9fcbfff]
[ 0.000000] node 0: [mem 0xd9fd1000-0xd9feffff]
[ 0.000000] node 0: [mem 0xd9ff2000-0xda006fff]
[ 0.000000] node 0: [mem 0xda008000-0xda019fff]
[ 0.000000] node 0: [mem 0xda041000-0xda054fff]
[ 0.000000] node 0: [mem 0xda056000-0xda056fff]
[ 0.000000] node 0: [mem 0xda059000-0xda059fff]
[ 0.000000] node 0: [mem 0xda05f000-0xda073fff]
[ 0.000000] node 0: [mem 0xda8a1000-0xda8a1fff]
[ 0.000000] node 0: [mem 0xda8e5000-0xdacfcfff]
[ 0.000000] node 0: [mem 0xdaff4000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11f1fffff]
[ 0.000000] On node 0 totalpages: 1019315
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13873 pages used for memmap
[ 0.000000] DMA32 zone: 887831 pages, LIFO batch:31
[ 0.000000] Normal zone: 1992 pages used for memmap
[ 0.000000] Normal zone: 127488 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd973c000-0xd973cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd974a000-0xd9d4afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9d4b000-0xd9d4dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9d66000-0xd9d66fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9d68000-0xd9d6dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9d70000-0xd9d79fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9f10000-0xd9f13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9f5e000-0xd9f64fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9f67000-0xd9f85fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9f89000-0xd9f8afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9fa2000-0xd9fa7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9fb0000-0xd9fb0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9fc0000-0xd9fc0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9fcc000-0xd9fd0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9ff0000-0xd9ff1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda007000-0xda007fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda01a000-0xda040fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda055000-0xda055fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda057000-0xda058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda05a000-0xda05efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda074000-0xda61bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda61c000-0xda89bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda89c000-0xda8a0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda8a2000-0xda8e4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdacfd000-0xdaff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbc00000-0xdfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011ee00000 s86464 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003365
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ccbbbe3b-d361-44e8-b93a-f7c790aaf561 cryptdevice=/dev/sda6:root root=/dev/mapper/root resume=/dev/sda5 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3928056K/4077260K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 149204K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 1696.085 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.51 BogoMIPS (lpj=5653616)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000040] Security Framework initialized
[ 0.000049] AppArmor: AppArmor disabled by boot time parameter
[ 0.000051] Yama: becoming mindful.
[ 0.000432] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001994] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002674] Mount-cache hash table entries: 256
[ 0.002903] Initializing cgroup subsys memory
[ 0.002916] Initializing cgroup subsys devices
[ 0.002918] Initializing cgroup subsys freezer
[ 0.002920] Initializing cgroup subsys net_cls
[ 0.002922] Initializing cgroup subsys blkio
[ 0.002951] CPU: Physical Processor ID: 0
[ 0.002952] CPU: Processor Core ID: 0
[ 0.002959] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003514] mce: CPU supports 7 MCE banks
[ 0.003529] CPU0: Thermal monitoring enabled (TM1)
[ 0.003540] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.003694] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.005107] ACPI: Core revision 20130725
[ 0.022592] ACPI: All ACPI Tables successfully acquired
[ 0.025140] ftrace: allocating 20318 entries in 80 pages
[ 0.038713] dmar: Host address width 36
[ 0.038717] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.038731] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.038733] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.038743] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.038744] dmar: RMRR base: 0x000000da5b3000 end: 0x000000da5bffff
[ 0.038746] dmar: RMRR base: 0x000000dbc00000 end: 0x000000dfdfffff
[ 0.038819] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.038821] HPET id 0 under DRHD base 0xfed91000
[ 0.039029] Enabled IRQ remapping in x2apic mode
[ 0.039030] Enabling x2apic
[ 0.039032] Enabled x2apic
[ 0.039039] Switched APIC routing to cluster x2apic.
[ 0.039513] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072533] smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (fam: 06, model: 3a, stepping: 09)
[ 0.072544] TSC deadline timer enabled
[ 0.072557] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.072566] ... version: 3
[ 0.072567] ... bit width: 48
[ 0.072569] ... generic registers: 4
[ 0.072570] ... value mask: 0000ffffffffffff
[ 0.072571] ... max period: 0000ffffffffffff
[ 0.072573] ... fixed-purpose events: 3
[ 0.072574] ... event mask: 000000070000000f
[ 0.109836] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096019] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.150869] Brought up 4 CPUs
[ 0.150873] smpboot: Total of 4 processors activated (13574.04 BogoMIPS)
[ 0.155453] devtmpfs: initialized
[ 0.159281] PM: Registering ACPI NVS region [mem 0xd974a000-0xd9d4afff] (6295552 bytes)
[ 0.159392] PM: Registering ACPI NVS region [mem 0xda61c000-0xda89bfff] (2621440 bytes)
[ 0.159438] PM: Registering ACPI NVS region [mem 0xda8a2000-0xda8e4fff] (274432 bytes)
[ 0.160524] RTC time: 23:18:41, date: 01/22/14
[ 0.160572] NET: Registered protocol family 16
[ 0.160700] cpuidle: using governor ladder
[ 0.160702] cpuidle: using governor menu
[ 0.160741] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.160743] ACPI: bus type PCI registered
[ 0.160746] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.160811] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.160814] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.187434] PCI: Using configuration type 1 for base access
[ 0.188206] bio: create slab <bio-0> at 0
[ 0.188350] ACPI: Added _OSI(Module Device)
[ 0.188353] ACPI: Added _OSI(Processor Device)
[ 0.188355] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.188356] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.191398] ACPI: EC: EC description table is found, configuring boot EC
[ 0.194578] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.208835] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.235864] ACPI: SSDT 00000000da5c9018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.236629] ACPI: Dynamic OEM Table Load:
[ 0.236632] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.245633] ACPI: SSDT 00000000da5caa98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.246436] ACPI: Dynamic OEM Table Load:
[ 0.246439] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.258821] ACPI: SSDT 00000000da5cbc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.259584] ACPI: Dynamic OEM Table Load:
[ 0.259587] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.272901] ACPI: Interpreter enabled
[ 0.272910] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.272917] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.272938] ACPI: (supports S0 S3 S4 S5)
[ 0.272940] ACPI: Using IOAPIC for interrupt routing
[ 0.272976] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.273204] ACPI: No dock devices found.
[ 0.291307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.291636] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.291935] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[ 0.292650] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
[ 0.292843] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[ 0.292846] ACPI: \_SB_.PCI0.ITPM: can't evaluate _ADR (0x5)
[ 0.292849] ACPI: \_SB_.PCI0.AC0_: can't evaluate _ADR (0x5)
[ 0.292851] ACPI: \_SB_.PCI0.BAT0: can't evaluate _ADR (0x5)
[ 0.292854] ACPI: \_SB_.PCI0.TMEM: can't evaluate _ADR (0x5)
[ 0.292861] PCI host bridge to bus 0000:00
[ 0.292865] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.292868] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.292870] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.292873] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.292875] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.292877] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.292879] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.292881] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.292883] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.292886] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.292888] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff]
[ 0.292898] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.293026] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.293042] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.293051] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.293058] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.293183] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.293197] pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.293367] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.293397] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 0.293485] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.293562] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.293611] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.293641] pci 0000:00:16.0: reg 0x10: [mem 0xf7e22000-0xf7e2200f 64bit]
[ 0.293732] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.293864] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.293891] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e20000-0xf7e203ff]
[ 0.293997] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.294072] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.294121] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.294142] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e18000-0xf7e1bfff 64bit]
[ 0.294227] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.294300] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.294348] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.294451] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.294529] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.294574] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.294671] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.294748] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.294793] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 0.294889] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.294967] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.295019] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.295046] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1f000-0xf7e1f3ff]
[ 0.295154] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.295228] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.295272] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.295507] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.295537] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.295548] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.295559] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.295569] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.295579] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.295591] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1e000-0xf7e1e7ff]
[ 0.295648] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.295755] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.295778] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e1d000-0xf7e1d0ff 64bit]
[ 0.295806] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.295933] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.295962] pci 0000:00:1f.6: reg 0x10: [mem 0xf7e1c000-0xf7e1cfff 64bit]
[ 0.296200] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.296330] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
[ 0.296363] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d7ffff 64bit]
[ 0.296435] pci 0000:02:00.0: reg 0x30: [mem 0xf7d80000-0xf7d8ffff pref]
[ 0.296511] pci 0000:02:00.0: supports D1 D2
[ 0.296513] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.296553] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.305425] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.305434] pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.305916] pci 0000:03:00.0: [1969:1091] type 00 class 0x020000
[ 0.306273] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c3ffff 64bit]
[ 0.306452] pci 0000:03:00.0: reg 0x18: [io 0xe000-0xe07f]
[ 0.308091] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308451] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.315580] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.315585] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.315590] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.315675] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.316742] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.316809] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
[ 0.316874] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 0.316938] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 0.317003] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.317067] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.317132] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 0.317196] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 0.317684] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.317693] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.317787] Found 1 acpi root devices
[ 0.317885] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.317998] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.318003] vgaarb: loaded
[ 0.318004] vgaarb: bridge control possible 0000:00:02.0
[ 0.318049] PCI: Using ACPI for IRQ routing
[ 0.319925] PCI: pci_cache_line_size set to 64 bytes
[ 0.319934] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.320008] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.320010] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.320012] e820: reserve RAM buffer [mem 0xd973c000-0xdbffffff]
[ 0.320022] e820: reserve RAM buffer [mem 0xd974a000-0xdbffffff]
[ 0.320032] e820: reserve RAM buffer [mem 0xd9d66000-0xdbffffff]
[ 0.320042] e820: reserve RAM buffer [mem 0xd9d68000-0xdbffffff]
[ 0.320051] e820: reserve RAM buffer [mem 0xd9d70000-0xdbffffff]
[ 0.320060] e820: reserve RAM buffer [mem 0xd9f10000-0xdbffffff]
[ 0.320069] e820: reserve RAM buffer [mem 0xd9f5e000-0xdbffffff]
[ 0.320078] e820: reserve RAM buffer [mem 0xd9f67000-0xdbffffff]
[ 0.320086] e820: reserve RAM buffer [mem 0xd9f89000-0xdbffffff]
[ 0.320094] e820: reserve RAM buffer [mem 0xd9fa2000-0xdbffffff]
[ 0.320102] e820: reserve RAM buffer [mem 0xd9fb0000-0xdbffffff]
[ 0.320110] e820: reserve RAM buffer [mem 0xd9fc0000-0xdbffffff]
[ 0.320117] e820: reserve RAM buffer [mem 0xd9fcc000-0xdbffffff]
[ 0.320124] e820: reserve RAM buffer [mem 0xd9ff0000-0xdbffffff]
[ 0.320130] e820: reserve RAM buffer [mem 0xda007000-0xdbffffff]
[ 0.320136] e820: reserve RAM buffer [mem 0xda01a000-0xdbffffff]
[ 0.320142] e820: reserve RAM buffer [mem 0xda055000-0xdbffffff]
[ 0.320148] e820: reserve RAM buffer [mem 0xda057000-0xdbffffff]
[ 0.320152] e820: reserve RAM buffer [mem 0xda05a000-0xdbffffff]
[ 0.320157] e820: reserve RAM buffer [mem 0xda074000-0xdbffffff]
[ 0.320161] e820: reserve RAM buffer [mem 0xda8a2000-0xdbffffff]
[ 0.320164] e820: reserve RAM buffer [mem 0xdacfd000-0xdbffffff]
[ 0.320167] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.320169] e820: reserve RAM buffer [mem 0x11f200000-0x11fffffff]
[ 0.320274] NetLabel: Initializing
[ 0.320276] NetLabel: domain hash size = 128
[ 0.320277] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.320291] NetLabel: unlabeled traffic allowed by default
[ 0.320318] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.320325] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.322357] Switched to clocksource hpet
[ 0.327535] pnp: PnP ACPI init
[ 0.327554] ACPI: bus type PNP registered
[ 0.327661] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.327666] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.327757] pnp 00:01: [dma 4]
[ 0.327783] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.327811] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.327947] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.327998] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.328001] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.328004] system 00:04: [io 0xffff] has been reserved
[ 0.328006] system 00:04: [io 0xffff] has been reserved
[ 0.328009] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.328011] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.328014] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.328016] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.328019] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.328066] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.328129] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.328133] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.328195] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.328199] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.328236] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.328278] system 00:09: [io 0x0240-0x0259] has been reserved
[ 0.328281] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.328364] pnp 00:0a: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.328419] pnp 00:0b: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.328684] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.328687] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.328690] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.328693] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.328696] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.328698] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.328703] system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.328706] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.328708] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.328711] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.328714] system 00:0c: [mem 0xdfe00000-0xdfe00fff] has been reserved
[ 0.328717] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.328949] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 0.328952] system 00:0d: [mem 0x40004000-0x40004fff] has been reserved
[ 0.328955] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.329007] pnp: PnP ACPI: found 14 devices
[ 0.329008] ACPI: bus type PNP unregistered
[ 0.336289] pci 0000:00:04.0: BAR 0: assigned [mem 0xdfe08000-0xdfe0ffff 64bit]
[ 0.336298] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.336315] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.336321] pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.336333] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.336337] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.336343] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.336355] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.336358] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.336360] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.336362] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.336365] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.336367] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.336369] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.336372] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.336374] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.336376] pci_bus 0000:00: resource 13 [mem 0xdfe00000-0xfeafffff]
[ 0.336379] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.336381] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.336384] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.336424] NET: Registered protocol family 2
[ 0.336640] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.336784] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.336883] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.336905] TCP: reno registered
[ 0.336916] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.336936] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.337004] NET: Registered protocol family 1
[ 0.337017] pci 0000:00:02.0: Boot video device
[ 0.372533] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.372538] PCI: CLS 64 bytes, default 64
[ 0.372584] Unpacking initramfs...
[ 0.501957] Freeing initrd memory: 5264K (ffff8800375a8000 - ffff880037acc000)
[ 0.501968] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.501972] software IO TLB [mem 0xd573c000-0xd973c000] (64MB) mapped at [ffff8800d573c000-ffff8800d973bfff]
[ 0.502227] Scanning for low memory corruption every 60 seconds
[ 0.502565] audit: initializing netlink socket (disabled)
[ 0.502578] type=2000 audit(1390432721.499:1): initialized
[ 0.519879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.521361] zbud: loaded
[ 0.521582] VFS: Disk quotas dquot_6.5.2
[ 0.521629] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.521859] msgmni has been set to 7682
[ 0.522197] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.522247] io scheduler noop registered
[ 0.522252] io scheduler deadline registered
[ 0.522284] io scheduler cfq registered (default)
[ 0.522879] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.522896] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.522952] intel_idle: MWAIT substates: 0x21120
[ 0.522954] intel_idle: v0.4 model 0x3A
[ 0.522956] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.523116] GHES: HEST is not enabled!
[ 0.523186] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.523801] Linux agpgart interface v0.103
[ 0.523889] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.525664] i8042: Detected active multiplexing controller, rev 1.1
[ 0.526668] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.526698] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.526725] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.526749] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.526768] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.526894] mousedev: PS/2 mouse device common for all mice
[ 0.526955] rtc_cmos 00:05: RTC can wake from S4
[ 0.527122] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.527153] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.527164] Intel P-state driver initializing.
[ 0.527178] Intel pstate controlling: cpu 0
[ 0.527195] Intel pstate controlling: cpu 1
[ 0.527207] Intel pstate controlling: cpu 2
[ 0.527221] Intel pstate controlling: cpu 3
[ 0.527304] drop_monitor: Initializing network drop monitor service
[ 0.527362] TCP: cubic registered
[ 0.527432] NET: Registered protocol family 10
[ 0.527573] NET: Registered protocol family 17
[ 0.527584] Key type dns_resolver registered
[ 0.527810] registered taskstats version 1
[ 0.528223] Magic number: 14:334:353
[ 0.528258] rapidio: hash matches
[ 0.528300] rtc_cmos 00:05: setting system clock to 2014-01-22 23:18:42 UTC (1390432722)
[ 0.528414] PM: Checking hibernation image partition /dev/sda5
[ 0.566832] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.627196] PM: Hibernation image not present or could not be loaded.
[ 0.628610] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 0.628613] Write protecting the kernel read-only data: 8192k
[ 0.632395] Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
[ 0.633895] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[ 0.643357] systemd-udevd[57]: starting version 208
[ 0.671481] ACPI: bus type USB registered
[ 0.671530] usbcore: registered new interface driver usbfs
[ 0.671539] usbcore: registered new interface driver hub
[ 0.671602] usbcore: registered new device driver usb
[ 0.672324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.672668] ehci-pci: EHCI PCI platform driver
[ 0.672855] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.672861] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.672868] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.672973] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.673003] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.673311] hub 1-0:1.0: USB hub found
[ 0.673324] hub 1-0:1.0: 4 ports detected
[ 0.673494] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.673499] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.673626] SCSI subsystem initialized
[ 0.673788] hub 2-0:1.0: USB hub found
[ 0.673802] hub 2-0:1.0: 4 ports detected
[ 0.674688] libata version 3.00 loaded.
[ 0.678139] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.678149] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.678157] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.678172] ehci-pci 0000:00:1a.0: debug port 2
[ 0.682075] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.682094] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e20000
[ 0.689246] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.689603] hub 3-0:1.0: USB hub found
[ 0.689616] hub 3-0:1.0: 2 ports detected
[ 0.689840] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.689847] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.689852] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.689865] ehci-pci 0000:00:1d.0: debug port 2
[ 0.693766] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.693787] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1f000
[ 0.702555] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.702683] hub 4-0:1.0: USB hub found
[ 0.702689] hub 4-0:1.0: 2 ports detected
[ 0.702780] ahci 0000:00:1f.2: version 3.0
[ 0.702923] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.702991] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 0.702995] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.703001] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.709661] scsi0 : ahci
[ 0.709775] scsi1 : ahci
[ 0.709848] scsi2 : ahci
[ 0.709950] scsi3 : ahci
[ 0.710020] scsi4 : ahci
[ 0.710119] scsi5 : ahci
[ 0.710156] ata1: SATA max UDMA/133 abar m2048@0xf7e1e000 port 0xf7e1e100 irq 43
[ 0.710159] ata2: SATA max UDMA/133 abar m2048@0xf7e1e000 port 0xf7e1e180 irq 43
[ 0.710160] ata3: DUMMY
[ 0.710161] ata4: DUMMY
[ 0.710162] ata5: DUMMY
[ 0.710163] ata6: DUMMY
[ 0.996131] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.029428] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.029482] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.029821] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.029948] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.029957] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.030571] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.030797] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.030808] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.030846] ata2.00: ATA-9: SanDisk SSD U100 24GB, CS.56.02, max UDMA/133
[ 1.030851] ata2.00: 46905264 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 1.031586] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.031655] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.031660] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.031923] ata2.00: configured for UDMA/133
[ 1.031975] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[ 1.031981] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.033183] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.033396] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.033404] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.034388] ata1.00: configured for UDMA/133
[ 1.034640] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[ 1.035210] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD U100 CS.5 PQ: 0 ANSI: 5
[ 1.038886] sd 1:0:0:0: [sdb] 46905264 512-byte logical blocks: (24.0 GB/22.3 GiB)
[ 1.038889] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.038893] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.039097] sd 0:0:0:0: [sda] Write Protect is off
[ 1.039102] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.039143] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.039191] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.039196] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.039263] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.042134] sdb: sdb1 sdb2
[ 1.043081] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.103034] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
[ 1.104100] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.120188] hub 3-1:1.0: USB hub found
[ 1.120368] hub 3-1:1.0: 6 ports detected
[ 1.226245] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.351133] hub 4-1:1.0: USB hub found
[ 1.351208] hub 4-1:1.0: 6 ports detected
[ 1.419829] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.502968] tsc: Refined TSC clocksource calibration: 1696.147 MHz
[ 1.515547] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.520770] usbcore: registered new interface driver usbhid
[ 1.520773] usbhid: USB HID core driver
[ 1.523898] hid-generic 0003:03EB:8807.0002: hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.3/input1
[ 1.525151] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input5
[ 1.525295] hid-multitouch 0003:03EB:8807.0001: input,hiddev0,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.3/input0
[ 1.780857] device-mapper: uevent: version 1.0.3
[ 1.780988] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [email protected]
[ 2.503661] Switched to clocksource tsc
[ 49.494477] bio: create slab <bio-1> at 1
[ 51.613355] bio: create slab <bio-1> at 1
[ 52.096749] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 52.754513] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 52.770525] systemd[1]: Set hostname to <destiny>.
[ 53.815700] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 53.816004] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 53.816092] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 53.816110] systemd[1]: Starting Remote File Systems.
[ 53.816488] systemd[1]: Reached target Remote File Systems.
[ 53.816503] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 53.816878] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 53.816892] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 53.817287] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 53.817300] systemd[1]: Starting LVM2 metadata daemon socket.
[ 53.817663] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 53.817675] systemd[1]: Starting Delayed Shutdown Socket.
[ 53.818026] systemd[1]: Listening on Delayed Shutdown Socket.
[ 53.818067] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 53.818521] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 53.818534] systemd[1]: Starting Encrypted Volumes.
[ 53.818873] systemd[1]: Reached target Encrypted Volumes.
[ 53.818889] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 53.818933] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 53.818948] systemd[1]: Starting udev Kernel Socket.
[ 53.819301] systemd[1]: Listening on udev Kernel Socket.
[ 53.819317] systemd[1]: Starting udev Control Socket.
[ 53.819671] systemd[1]: Listening on udev Control Socket.
[ 53.819685] systemd[1]: Starting Journal Socket.
[ 53.820072] systemd[1]: Listening on Journal Socket.
[ 53.847545] systemd[1]: Starting Apply Kernel Variables...
[ 53.889485] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 53.890128] systemd[1]: Mounting Huge Pages File System...
[ 53.890778] systemd[1]: Mounting Debug File System...
[ 53.905894] systemd[1]: Started Set Up Additional Binary Formats.
[ 53.905920] systemd[1]: Starting udev Coldplug all Devices...
[ 53.906566] systemd[1]: Mounting POSIX Message Queue File System...
[ 53.907181] systemd[1]: Starting Setup Virtual Console...
[ 53.936499] systemd[1]: Starting Load Kernel Modules...
[ 53.937000] systemd[1]: Starting Journal Service...
[ 53.937808] systemd[1]: Started Journal Service.
[ 54.492834] systemd-journald[188]: Vacuuming done, freed 0 bytes
[ 54.665128] FS-Cache: Loaded
[ 54.823897] RPC: Registered named UNIX socket transport module.
[ 54.823900] RPC: Registered udp transport module.
[ 54.823901] RPC: Registered tcp transport module.
[ 54.823902] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 54.878117] FS-Cache: Netfs 'nfs' registered for caching
[ 54.897820] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
[ 54.976436] systemd-udevd[222]: starting version 208
[ 55.637097] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 55.671168] ACPI: Requesting acpi_cpufreq
[ 55.759044] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPIS 1 (20130725/utaddress-251)
[ 55.759051] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 2 (20130725/utaddress-251)
[ 55.759055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 55.759058] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 55.759061] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GP01 2 (20130725/utaddress-251)
[ 55.759063] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 55.759064] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 55.759066] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GP01 2 (20130725/utaddress-251)
[ 55.759069] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 55.759070] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 55.771455] mei_me 0000:00:16.0: setting latency timer to 64
[ 55.771503] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 55.782068] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \SMB0 1 (20130725/utaddress-251)
[ 55.782075] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 2 (20130725/utaddress-251)
[ 55.782078] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 55.828969] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
[ 55.851622] ACPI: AC Adapter [AC0] (on-line)
[ 55.858244] ACPI: Lid Switch [LID]
[ 55.858924] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
[ 55.858931] ACPI: Power Button [PWRB]
[ 55.859040] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9
[ 55.859045] ACPI: Sleep Button [SLPB]
[ 55.874026] thermal LNXTHERM:00: registered as thermal_zone0
[ 55.874030] ACPI: Thermal Zone [THRM] (54 C)
[ 55.888759] wmi: Mapper loaded
[ 55.901127] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 56.045308] [drm] Initialized drm 1.1.0 20060810
[ 56.101960] ACPI: Battery Slot [BAT0] (battery present)
[ 56.186252] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 56.229363] [drm] Memory usable by graphics device = 2048M
[ 56.229371] i915 0000:00:02.0: setting latency timer to 64
[ 56.271842] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 56.272259] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 56.272657] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 56.273090] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 56.292216] iTCO_vendor_support: vendor-support=0
[ 56.303027] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 56.303435] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 56.303547] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 56.312468] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 56.312476] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 56.312478] [drm] Driver supports precise vblank timestamp query.
[ 56.312530] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 56.320735] pcieport 0000:00:1c.3: driver skip pci_set_master, fix it!
[ 56.323454] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [50:46:5d:44:20:4e]
[ 56.338961] cfg80211: Calling CRDA to update world regulatory domain
[ 56.354069] fbcon: inteldrmfb (fb0) is primary device
[ 56.386798] systemd-udevd[225]: renamed network interface eth0 to enp3s0
[ 56.387333] asus_wmi: ASUS WMI generic driver loaded
[ 56.443547] asus_wmi: Initialization: 0x1
[ 56.443595] asus_wmi: BIOS WMI version: 7.9
[ 56.443645] asus_wmi: SFUN value: 0x4a0877
[ 56.444364] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input15
[ 56.496856] asus_wmi: Backlight controlled by ACPI video driver
[ 56.611945] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 56.625615] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[ 56.626015] ath: phy0: Set parameters for CUS198
[ 56.626016] ath: phy0: Set BT/WLAN RX diversity capability
[ 56.633052] ath: phy0: Enable LNA combining
[ 56.634301] ath: EEPROM regdomain: 0x60
[ 56.634302] ath: EEPROM indicates we should expect a direct regpair map
[ 56.634304] ath: Country alpha2 being used: 00
[ 56.634305] ath: Regpair used: 0x60
[ 56.702834] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 56.703048] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90005080000, irq=17
[ 56.721778] systemd-udevd[225]: renamed network interface wlan0 to wlp2s0
[ 56.772915] usb 3-1.3: USB disconnect, device number 3
[ 57.033980] Console: switching to colour frame buffer device 170x48
[ 57.038368] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 57.038371] i915 0000:00:02.0: registered panic notifier
[ 57.063265] acpi device:35: registered as cooling_device5
[ 57.068721] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 57.068800] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 57.069038] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 57.069348] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 57.113284] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 57.126957] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[ 57.196061] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input14
[ 57.302058] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 57.355352] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 57.361061] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 57.361163] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 57.403112] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input19
[ 57.403344] hid-multitouch 0003:03EB:8807.0003: input,hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.3/input0
[ 57.408670] hid-generic 0003:03EB:8807.0004: hiddev0,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.3/input1
[ 57.981260] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 57.983757] EXT4-fs (sda1): mounted filesystem without journal. Opts: stripe=4
[ 58.605623] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 58.687256] systemd-journald[188]: Received request to flush runtime journal from PID 1
[ 63.669522] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 70.752050] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 70.887566] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 74.133941] wlp2s0: authenticate with 00:0c:e6:38:77:01
[ 74.153357] wlp2s0: send auth to 00:0c:e6:38:77:01 (try 1/3)
[ 74.156294] wlp2s0: authenticated
[ 74.156427] wlp2s0: associate with 00:0c:e6:38:77:01 (try 1/3)
[ 74.161215] wlp2s0: RX AssocResp from 00:0c:e6:38:77:01 (capab=0x431 status=0 aid=2)
[ 74.161275] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 74.161350] wlp2s0: associated
[ 86.423886] cfg80211: Calling CRDA for country: US
[ 87.280885] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 92.104925] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 93.611340] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 93.728633] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 95.907554] wlp2s0: authenticate with 00:0c:e6:38:7a:01
[ 95.926939] wlp2s0: send auth to 00:0c:e6:38:7a:01 (try 1/3)
[ 95.931863] wlp2s0: au
I am not using a vga-cable, its an Asus eeePC
$: lspci | grep vga
03:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series]
$: grep 'LoadModule' /var/log/Xorg.0.log
[ 52.604] (II) LoadModule: "extmod"
[ 52.689] (II) LoadModule: "dbe"
[ 52.702] (II) LoadModule: "glx"
[ 52.711] (II) LoadModule: "record"
[ 52.713] (II) LoadModule: "dri"
[ 52.744] (II) LoadModule: "dri2"
[ 52.746] (II) LoadModule: "ati"
[ 52.764] (II) LoadModule: "radeon"
[ 52.788] (II) LoadModule: "vesa"
[ 52.810] (II) LoadModule: "fbdev"
[ 52.841] (II) UnloadModule: "fbdev"
[ 53.172] (II) LoadModule: "fb"
[ 53.188] (II) LoadModule: "ramdac"
[ 53.188] (II) LoadModule: "exa"
[ 53.203] (II) UnloadModule: "vesa"
[ 54.057] (II) LoadModule: "evdev"
Similar Messages
-
I have this black outlined box with cursor stuck in it after upgrading from Snow Leopard to Mavericks -- any help??? I can't get rid of it.
From another thread.
https://discussions.apple.com/message/24902799#24902799
Go to accesibility/zoom/more options/show rectangle... and uncheck that.
Strange outline rectangle on my screen... -
Grey screen playing ITunedownloaded TV shows after upgrading to Windows 7
Since upgrading to Windows 7 I can't play TV Shows that I have previously purchased from ITunes as well as the ones I downloaded after upgrading the system. I have installed current version of Quicktime and the right ITunes for 64 bit
I also have a 32 bit computer - upgraded that too and it plays the shows. My 64 bit computer does not play the shows- I get a grey screen, no sound and the progress indicator moves.
When in ITunes I do get a constant popup asking for authorisation. After I have authorised another pop up says- you are already authorised on this machine!! I don't know whether this is related or not.Here is a copy of my reply to this problem in another post.
This may be of no help but here goes. I am not a real computer person. Anyway I had the same problem and also lost the digital part of my tuner when I downloaded the W7 mediasmart live TV. After a lot of attempts to fix stuff I uninstalled Mediasmart live TV. It worked. Next I downloaded the W7 live TV. Installed but could not find it. Desperate I restored the Vista version from the partition. Could not find that either. Next I did a search (start menu) for mediasmart live tv. One thing was found which I clicked on. It appears another install took place.
Now Live TV works and I get full screen. Also my tuner went back to analog antenna/cable and digital antenna/cable (QAM). I really have no explaination for this but I'm back with W7. Can't find a version number but it's 71 mb in size at
c:\program files (x86)\Hewlett-Packard\media\live tv"
Dumb luck
So that's what happened. I think the uninstall had something to do with solving the problem. Why I could not find the W7 download is beyond me. I was at a point where I didn't think I could make it worse so I thought I'd try anything. No TV problems with Windows Media Center during any of this. -
Blank page with advertisement after upgrading to IOS 6 !!!
I am using my IPAD2 in China. After upgrading to IOS 6, I frequently get a blank page having a message "success" and a Chinese advertisement. I have to touch the "Done" button on the top right corner to get it out. Is it that IOS 6 have been hacked by China's service providers to force advertisements into IOS 6 ?
Thanks. It does not stop the advertisement from coming in. The advertisement still pops up now and then. It seems that China's service providers have successfully hacked into IOS 6. Maybe there is a flaw in IOS 6.
-
MBA screen randomly freezes, locks up after upgrade to Mavericks
Sometimes my MacBookAir5,2 freezes, not allowing any input from the keyboard and trackpad (I don't use/have a mouse) except for the power key to force quit it. It happens AFAICT randomly, maybe while I'm browsing. In this case there're no crash reports or related messages in Console.app by the time it locks up.
Other times it freezes and WindowServer crashes and I'm logged out. For that you can check the reports below.
I don't know if both problems are related. This all started when I moved to effing Mavericks from Mountain Lion (which was pretty solid and I'd probably return to).
I reset the SMC a couple of times to no avail. Any hints as to what could be causing it or how can I further troubleshoot this problem?
Process: WindowServer [115]
Path: /System/Library/Frameworks/CoreGraphics.framework/Versions/A/Resources/WindowSe rver
Identifier: WindowServer
Version: 599.35.6
Code Type: X86-64 (Native)
Parent Process: launchd [1]
Responsible: WindowServer [115]
User ID: 88
Date/Time: 2015-03-03 17:31:17.767 +0100
OS Version: Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 46BFC04A-DCCF-C9EF-1783-978639D06941
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
Application Specific Signatures:
Graphics hardware encountered an error and was reset: 0x00000000
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fff8b0f0866 __pthread_kill + 10
1 libsystem_pthread.dylib 0x00007fff8ecee35c pthread_kill + 92
2 libsystem_c.dylib 0x00007fff8ed50b1a abort + 125
3 libGPUSupportMercury.dylib 0x00007fff8c5521ca gpusKillClient + 111
4 libGPUSupportMercury.dylib 0x00007fff8c55365f gpusSubmitDataBuffers + 484
5 com.apple.driver.AppleIntelHD4000GraphicsGLDriver 0x0000123400362460 IntelCommandBuffer::getNew(GLDContextRec*) + 54
6 com.apple.driver.AppleIntelHD4000GraphicsGLDriver 0x000012340035ee3d GenContext::prepareCommandBuffer() + 23
7 com.apple.driver.AppleIntelHD4000GraphicsGLDriver 0x00001234003622d5 intelSubmitCommands + 201
8 com.apple.CoreGraphics 0x00007fff948d4001 CGXGLAccelFinish + 156
9 com.apple.CoreGraphics 0x00007fff9480addb CGXReleaseDisplayDeviceSurface + 197
10 com.apple.CoreGraphics 0x00007fff94add147 CGXUpdateDisplay + 8838
11 com.apple.CoreGraphics 0x00007fff94adadfd update_display_callback + 125
12 com.apple.CoreGraphics 0x00007fff94ba0dd3 run_timer_pass + 379
13 com.apple.CoreGraphics 0x00007fff94a5f0f9 CGXRunOneServicesPass + 164
14 com.apple.CoreGraphics 0x00007fff94a5f936 CGXServer + 807
15 WindowServer 0x0000000107b92f96 main + 9
16 libdyld.dylib 0x00007fff90cbb5fd start + 1
Process: WindowServer [109]
Path: /System/Library/Frameworks/CoreGraphics.framework/Versions/A/Resources/WindowSe rver
Identifier: WindowServer
Version: 599.35.6
Code Type: X86-64 (Native)
Parent Process: launchd [1]
Responsible: WindowServer [109]
User ID: 88
Date/Time: 2015-03-21 21:23:17.429 +0100
OS Version: Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 46BFC04A-DCCF-C9EF-1783-978639D06941
Sleep/Wake UUID: 96990396-5DED-467F-8D31-262C3C184DAE
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
Application Specific Signatures:
Graphics hardware encountered an error and was reset: 0x00000000
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fff8936f866 __pthread_kill + 10
1 libsystem_pthread.dylib 0x00007fff8cf6d35c pthread_kill + 92
2 libsystem_c.dylib 0x00007fff8cfcfb1a abort + 125
3 libGPUSupportMercury.dylib 0x00007fff8a7d11ca gpusKillClient + 111
4 libGPUSupportMercury.dylib 0x00007fff8a7d265f gpusSubmitDataBuffers + 484
5 com.apple.driver.AppleIntelHD4000GraphicsGLDriver 0x0000123400362460 IntelCommandBuffer::getNew(GLDContextRec*) + 54
6 com.apple.driver.AppleIntelHD4000GraphicsGLDriver 0x000012340035ee3d GenContext::prepareCommandBuffer() + 23
7 com.apple.driver.AppleIntelHD4000GraphicsGLDriver 0x00001234003622d5 intelSubmitCommands + 201
8 com.apple.CoreGraphics 0x00007fff92b53001 CGXGLAccelFinish + 156
9 com.apple.CoreGraphics 0x00007fff92a89ddb CGXReleaseDisplayDeviceSurface + 197
10 com.apple.CoreGraphics 0x00007fff92d5c147 CGXUpdateDisplay + 8838
11 com.apple.CoreGraphics 0x00007fff92d59dfd update_display_callback + 125
12 com.apple.CoreGraphics 0x00007fff92e1fdd3 run_timer_pass + 379
13 com.apple.CoreGraphics 0x00007fff92cde0f9 CGXRunOneServicesPass + 164
14 com.apple.CoreGraphics 0x00007fff92cde936 CGXServer + 807
15 WindowServer 0x00000001081eef96 main + 9
16 libdyld.dylib 0x00007fff8ef3a5fd start + 1I agree with Bob, run EtreCheck and post the results here.
A couple of questions. You mentioned resetting the SMC, have you tried zapping the PRAM? If not, you can do this by:
Shutting your Mac all the way down.
Restarting your Mac and immediately pressing the Command-Option-P-R keys simultaneously. Make sure you press the keys before the gray screen comes up.
Hold those keys down until your Mac reboots again and you here the startup sound.
Let go of the keys so your Mac reboots as per usual.
Also, how long after upgrading to Mavericks did this problem start? -
Blank box around cursor after upgrade to Mountain Lion
After upgrading to Mountain Lion this morning, I have ended up with a wire-frame empty box that moves with my cursor movements. I cannot move the curson outside the box. The cursor still works as normal and the programs that I have executed since the upgrade seem to work just fine. So other than the cursor being captured inside this bounding box, my iMac seems to be working great. I hope someone has some ideas on how I can get rid of this annoying box!
I appreciate the help! When I checked the accessbility preferences one was marked "show preview rectange when zoomed out" - or words close to that. All i know is that when I unchecked the box, the rectange went away! I appreciate your fast response and the fix!
-
7941G Phone Screen Blank. Not able to Upgrade the Firmware
Hi All
I have Phone Cisco 7941G, iam try to upgrade i mess with that phone i believe, now screen is blank
I have followed the below steps :
1: Disconnect the computer from your Network and Connected to Different Switch, where Phone and PC Only connected to that network
2: Phone and PC connected to Switch
3: Configure a static IP on the computer and disable any firewall.
3a: Use an IP of 10.10.10.1
3b: Use a Mask of 255.255.255.0
3c: Gateway and DNS can be left blank
4: Install and open TFTPd32 software
5: Click settings and modify the following:
5a: In the GLOBAL tab, uncheck everything except TFTP Server and DHCP Server
5b: In the TFTP tab, set a Base Directory to somewhere convenient ( where my files are located).
5c: In the TFTP tab, set TFTP Security to None
5d: in the DHCP tab uncheck all DHCP Options
6: Restart TFTPd32
7: Click on the settings tab and modify the following:
7a: In the DHCP tab, set IP pool starting address to 10.10.10.3, size of pool 2, mask 255.255.255.0, additional option 66 and 10.10.10.1 then click OK
8. Click on the Log viewer tab
9: Plug in the power of the phone and watch the logs.
I see below logs keep poping same logs.
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:26:99:45:8C:DA [23/12 13:28:26.724]
Previously allocated address 10.10.10.3 acked [23/12 13:28:26.724]
6512 Request 2 not processed [23/12 13:28:26.734]
Connection received from 10.10.10.3 on port 49152 [23/12 13:28:26.794]
Read request for file <term41.default.loads>. Mode octet [23/12 13:28:26.795]
Using local port 53590 [23/12 13:28:26.795]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:28:26.801]
Connection received from 10.10.10.3 on port 49153 [23/12 13:28:28.044]
Read request for file <term41.default.loads>. Mode octet [23/12 13:28:28.046]
Using local port 53591 [23/12 13:28:28.046]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:28:28.051]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:30:52.950]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:30:55.950]
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:26:99:45:8C:DA [23/12 13:31:21.618]
Previously allocated address 10.10.10.3 acked [23/12 13:31:21.618]
6512 Request 2 not processed [23/12 13:31:21.618]
Connection received from 10.10.10.3 on port 49152 [23/12 13:31:21.671]
Read request for file <term41.default.loads>. Mode octet [23/12 13:31:21.671]
Using local port 64619 [23/12 13:31:21.671]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:31:21.682]
Connection received from 10.10.10.3 on port 49153 [23/12 13:31:22.909]
Read request for file <term41.default.loads>. Mode octet [23/12 13:31:22.919]
Using local port 64623 [23/12 13:31:22.919]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:31:22.919]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:32:21.322]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:32:24.330]
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:26:99:45:8C:DA [23/12 13:34:15.567]
Previously allocated address 10.10.10.3 acked [23/12 13:34:15.567]
6512 Request 2 not processed [23/12 13:34:15.567]
Connection received from 10.10.10.3 on port 49152 [23/12 13:34:15.617]
Read request for file <term41.default.loads>. Mode octet [23/12 13:34:15.617]
Using local port 56662 [23/12 13:34:15.617]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:34:15.627]
Connection received from 10.10.10.3 on port 49153 [23/12 13:34:16.861]
Read request for file <term41.default.loads>. Mode octet [23/12 13:34:16.861]
Using local port 56663 [23/12 13:34:16.861]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:34:16.871]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:34:46.280]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:34:49.283]
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 38:AA:3C:51:02:85 [23/12 13:36:11.185]
Client requested address 0.0.0.98 [23/12 13:36:11.185]
DHCP: proposed address 10.10.10.4 [23/12 13:36:11.205]
My TFTP Folded have below files shown in the Image.
How can i make it work from non-working phone to working phone..
any suggestions most welcome, tried last 2days but no results, googled many pages and read related article does not help me.Hi
I do not know the old version of Cisco 7941G
I got one for testing myself for my LAB, Want to reset the Password, but I did Factory reset by keying 124567890*#
iam trying to Load 9.2X tried both SCCP and SIP, both iam getting the same error.
At the moment iam not going to use for any CME or CUCM, iam want to use for my SIP provider and my SIP Server.
Bandi -
Cannot 'Unmark Blank' for FIB Questions after Upgrade from CP4 to CP5 (Fill in the Blank)
Hi Everyone!
I'm having trouble editing a fill in the blank question that was upgraded from CP4 to CP5.
The problems is I cannot see where the blank is. Not the blank in my sentence, I have that, but the entry box. When running the course the blanks are at the TOP LEFT corner fo the slide.
but when creating the course I can't see where the blanks are, to move them.....
So to Troubleshoot, I thought I'd re-construct the answers, I clicked the sentence, and clicked unmark ... but it does not unmark....
<EDIT> Okay I got it to unmark, sorta, but not really. Now I have three answer boxes on the test in run mode, but cant see ANY in CP5 when building it. </EDIT>
Hmmmmm
Anyone got ideas?
(re-constructing the question on a new slide is not desired, I have hundres of questions, considering my 30 courses.
Thank you!
GregHello,
Sorry, but I do not understand your question quite well, it is an editing issue when upgrading. Perhaps it would help if you posted some screenshots?
And to be sure: did you install the patch for CP5 released in December?
Lilybiri -
after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
Although IE11 works, it doesn't work correctly.It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you
Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H. -
I have blank iTune store screen after upgrading to 10.5 on my Window 7
I have a blank iTune store screen after upgrading to 10.5. Can only see the account details but no apps nor podcasts.
Try rebooting your computer and then your iTunes.
-
Ipad2 screen blank after ios 8 upgrade
Screen blank, used the home and off button, still not working, a faint light comes on and nothing else
- forced to reset factory settings, all data lost, a very upset daughter! all minecraft worlds created now gone!
seems to be acknowledged by itunes but just get screen on ipad to work any ideas?Here's the list of the most annoying issues that affect me since updating my iPad 2 64GB w/Cellular iPad to IOS 8:
EXTREMELY SLOW - When opening apps, or switching between them - We are talking just the built-in apps. Mail, Safari, Settings....
Extremely slow Wi-Fi AND broadband. The Wi-Fi is the worst though. Horrible. Page load times are 2 to 4x slower than my wife's iPad.
Battery life reduced by at least 25%. Used to make it all day long, now I am having to plug it in.
Heat - It is working so hard that the processor is heating up. That can't be healthy for it, and surely the majority of the power issues stem from this.
Copy/Paste not functioning correctly between browser windows. Oh this is frustrating. I just want to paste the URL of one website I am on to Facebook, for instance. Even though I COPY, it's pasting in info I clipped a earlier in the day to one browser tab, but if I open another one, it will paste the correct information. You never know what you are going to get.
Cannot post a photo to facebook by hitting the camera icon when leaving a reply or making a post (using web browser version)... It starts the upload, then just stops. I *CAN* go to photos, then SHARE it to facebook, but that doesn't allow me to post a photo along with a reply.
Multiple app crashes per day. This I can deal with. It's nothing new, it's just more frequent. Safari and Mail seem to be the major culprits. It wouldn't be so bad except it takes 2-4 seconds to reopen the crashed app. Sometimes as much as 10 seconds.
And that's just the annoying ones.... -
Screen blanking after upgrading to OSX10.9.2
After upgrading to OSX10.9.2 the monitor will randomlly go black. This never happend prior to upgrading to OSX10.9.2. Is there a permanant fix or a way I can go back to the previous version OF OSX?
Recover the backup you made before installing 10.9.2.
If you didn't backup, you should have.
https://discussions.apple.com/docs/DOC-1992 -
Console does not comes back to life after screen blanking
edited post on 2014-07-13:
This problem has nothing to do with suspend-to-RAM and/or suspend-to-disk (hibernate).
It is a screen blanking on the console triggered by a timeout in the kernel.
It can be modified (or disabled) with the setterm command for the current session.
The issue is still unresolved since the console doesn't comes back to life after hitting a key.
See post#6 on 2014-07-13 for further details.
Changed title accordingly.
original post on 2014-07-09 titled "blank screen on resume after suspend but screen OK after hibernation" follows:
Dell Inspiron 9400 (aka E1705) with Radeon X1400 (RV515) (confirmed by dmesg: loading R500 microcode)
- arch x86_64 fully updated up to 07-JULY-2014
- xf86-video-ati open source driver installed
- no (additional; ie: explicitly) installed power management packages such as pm-utils
- no X installed
The problem:
• hibernation works fine; ie: by closing (and waiting a few seconds) and re-opening the lid
• however resume after suspend isn't working; ie: by pressing any key to resume ... it seems the screen never comes back to life
After suspend activates (and after I hit a key to activate resume) I see no activity at all (blank screen) but ... if I type some commands (eg: timedatectl etc) and then I close the lid to activate the hibernation sequence re-opening the lid (say, a minute later) the machine comes back from hibernation as expected and I can see the commands (and output) I typed when the screen was blank so ... it seems to me either:
• the backlight state is not restored on the resume sequence (first thought)
• the machine shuts down the screen after (a 10 minute) timeout but never activates the suspend sequence (and will never activate resume then) (second thought while reading dmesg output)
This problem was present on this laptop since my first (and subsequent) arch installations so it seems is not kernel/driver specific since I did many pacman --sysupgrades in between while learning arch.
The testing sequence (with related entries on included dmesg output):
- typed timedatectl ... showing 23.29.04
- now allowing idle time for the machine to suspend
- suspend starts at 23.39 (ie: after 10 minutes) ... tag it as event1#1
- after 30 seconds resuming with the space key and after a few seconds typing (blindly) timedatectl ... tag it as event1#2
- after 60 seconds closing the lid allowing time for hibernation ... tag it as event2#1
- after 30 seconds opening the lid ... tag it as event2#2
- now I can see the output for timedatectl (typed blindly on event1#2) and it shows 23.40.11
As you can see in attached dmesg output (at the bottom of this post) there are (to me) no evident entries for event1#2 (resuming after suspend):
... event#1-1 ... suspend starts here:
[Mon Jul 7 23:40:12 2014] perf interrupt took too long (2504 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
... event#1-2 ... resume from suspend should show some entries here:
no entries at all
And the next entry after entering the suspend sequence is the starting of the hibernation sequence (when closing the lid):
... event#2-1 ... hibernation starts here:
[Mon Jul 7 23:41:30 2014] PM: Syncing filesystems ... done.
[Mon Jul 7 23:41:30 2014] smpboot: CPU 1 is now offline
... event#2-2 ... coming back from hibernation (I think) starts here:
[Mon Jul 7 23:41:30 2014] ACPI: Low-level resume complete
[Mon Jul 7 23:41:31 2014] Restarting tasks ... done.
[Mon Jul 7 23:41:31 2014] video LNXVIDEO:00: Restoring backlight state
So the machine shuts off the screen (and/or backlight) but never enters suspend mode because "restoring backlight state" appears once and should appear twice in my testing.
Why isn't working then ?
Because the signal to enter suspend mode is never sent/received by the OS ?
Which brings me to a key question: is the acpi package (which it is not installed) (or something like that) required for such signaling ?
In the following post a user claims a similar problem but he can see some activity (after resuming from suspend) by directing a bright light to the screen so the problem there seems to be the backlight not powered up again: it is not my case, when I did the same I saw no activity at all.
https://bbs.archlinux.org/viewtopic.php?id=183580
Following is full dmesg output (edited with a couple of lines inserted to keep track of mentioned events):
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuset
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpu
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuacct
[Mon Jul 7 22:52:56 2014] Linux version 3.15.3-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jul 1 07:32:45 CEST 2014
[Mon Jul 7 22:52:56 2014] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
[Mon Jul 7 22:52:56 2014] e820: BIOS-provided physical RAM map:
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000100000-0x000000007fed33ff] usable
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000007fed3400-0x000000007fffffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f0000000-0x00000000f4006fff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f4008000-0x00000000f400bfff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[Mon Jul 7 22:52:56 2014] NX (Execute Disable) protection: active
[Mon Jul 7 22:52:56 2014] SMBIOS 2.4 present.
[Mon Jul 7 22:52:56 2014] DMI: Dell Inc. MP061 /0YD479, BIOS A10 08/26/2009
[Mon Jul 7 22:52:56 2014] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[Mon Jul 7 22:52:56 2014] e820: remove [mem 0x000a0000-0x000fffff] usable
[Mon Jul 7 22:52:56 2014] No AGP bridge found
[Mon Jul 7 22:52:56 2014] e820: last_pfn = 0x7fed3 max_arch_pfn = 0x400000000
[Mon Jul 7 22:52:56 2014] MTRR default type: uncachable
[Mon Jul 7 22:52:56 2014] MTRR fixed ranges enabled:
[Mon Jul 7 22:52:56 2014] 00000-9FFFF write-back
[Mon Jul 7 22:52:56 2014] A0000-BFFFF uncachable
[Mon Jul 7 22:52:56 2014] C0000-CFFFF write-protect
[Mon Jul 7 22:52:56 2014] D0000-EFFFF uncachable
[Mon Jul 7 22:52:56 2014] F0000-FFFFF write-protect
[Mon Jul 7 22:52:56 2014] MTRR variable ranges enabled:
[Mon Jul 7 22:52:56 2014] 0 base 000000000 mask F80000000 write-back
[Mon Jul 7 22:52:56 2014] 1 base 07FF00000 mask FFFF00000 uncachable
[Mon Jul 7 22:52:56 2014] 2 disabled
[Mon Jul 7 22:52:56 2014] 3 disabled
[Mon Jul 7 22:52:56 2014] 4 disabled
[Mon Jul 7 22:52:56 2014] 5 disabled
[Mon Jul 7 22:52:56 2014] 6 disabled
[Mon Jul 7 22:52:56 2014] 7 disabled
[Mon Jul 7 22:52:56 2014] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[Mon Jul 7 22:52:56 2014] Scanning 1 areas for low memory corruption
[Mon Jul 7 22:52:56 2014] Base memory trampoline at [ffff880000099000] 99000 size 24576
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00000000-0x000fffff]
[Mon Jul 7 22:52:56 2014] [mem 0x00000000-0x000fffff] page 4k
[Mon Jul 7 22:52:56 2014] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[Mon Jul 7 22:52:56 2014] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[Mon Jul 7 22:52:56 2014] BRK [0x01b40000, 0x01b40fff] PGTABLE
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[Mon Jul 7 22:52:56 2014] [mem 0x7fc00000-0x7fdfffff] page 2M
[Mon Jul 7 22:52:56 2014] BRK [0x01b41000, 0x01b41fff] PGTABLE
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[Mon Jul 7 22:52:56 2014] [mem 0x7c000000-0x7fbfffff] page 2M
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[Mon Jul 7 22:52:56 2014] [mem 0x00100000-0x001fffff] page 4k
[Mon Jul 7 22:52:56 2014] [mem 0x00200000-0x7bffffff] page 2M
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fe00000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] [mem 0x7fe00000-0x7fed2fff] page 4k
[Mon Jul 7 22:52:56 2014] BRK [0x01b42000, 0x01b42fff] PGTABLE
[Mon Jul 7 22:52:56 2014] RAMDISK: [mem 0x3729a000-0x37944fff]
[Mon Jul 7 22:52:56 2014] ACPI: RSDP 0x00000000000FC1B0 000014 (v00 DELL )
[Mon Jul 7 22:52:56 2014] ACPI: RSDT 0x000000007FED39CD 000040 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: FACP 0x000000007FED4800 000074 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: DSDT 0x000000007FED5400 004841 (v01 INT430 SYSFexxx 00001001 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: FACS 0x000000007FEE3C00 000040
[Mon Jul 7 22:52:56 2014] ACPI: HPET 0x000000007FED4F00 000038 (v01 DELL M07 00000001 ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: APIC 0x000000007FED5000 000068 (v01 DELL M07 27D9081A ASL 00000047)
[Mon Jul 7 22:52:56 2014] ACPI: MCFG 0x000000007FED4FC0 00003E (v16 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: SLIC 0x000000007FED509C 000176 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: BOOT 0x000000007FED4BC0 000028 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3A0D 0004DC (v01 PmRef CpuPm 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
[Mon Jul 7 22:52:56 2014] No NUMA configuration found
[Mon Jul 7 22:52:56 2014] Faking a node at [mem 0x0000000000000000-0x000000007fed2fff]
[Mon Jul 7 22:52:56 2014] Initmem setup node 0 [mem 0x00000000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] NODE_DATA [mem 0x7fece000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[Mon Jul 7 22:52:56 2014] Zone ranges:
[Mon Jul 7 22:52:56 2014] DMA [mem 0x00001000-0x00ffffff]
[Mon Jul 7 22:52:56 2014] DMA32 [mem 0x01000000-0xffffffff]
[Mon Jul 7 22:52:56 2014] Normal empty
[Mon Jul 7 22:52:56 2014] Movable zone start for each node
[Mon Jul 7 22:52:56 2014] Early memory node ranges
[Mon Jul 7 22:52:56 2014] node 0: [mem 0x00001000-0x0009efff]
[Mon Jul 7 22:52:56 2014] node 0: [mem 0x00100000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] On node 0 totalpages: 523889
[Mon Jul 7 22:52:56 2014] DMA zone: 64 pages used for memmap
[Mon Jul 7 22:52:56 2014] DMA zone: 21 pages reserved
[Mon Jul 7 22:52:56 2014] DMA zone: 3998 pages, LIFO batch:0
[Mon Jul 7 22:52:56 2014] DMA32 zone: 8124 pages used for memmap
[Mon Jul 7 22:52:56 2014] DMA32 zone: 519891 pages, LIFO batch:31
[Mon Jul 7 22:52:56 2014] ACPI: PM-Timer IO Port: 0x1008
[Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[Mon Jul 7 22:52:56 2014] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[Mon Jul 7 22:52:56 2014] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[Mon Jul 7 22:52:56 2014] ACPI: IRQ0 used by override.
[Mon Jul 7 22:52:56 2014] ACPI: IRQ2 used by override.
[Mon Jul 7 22:52:56 2014] ACPI: IRQ9 used by override.
[Mon Jul 7 22:52:56 2014] Using ACPI (MADT) for SMP configuration information
[Mon Jul 7 22:52:56 2014] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[Mon Jul 7 22:52:56 2014] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[Mon Jul 7 22:52:56 2014] nr_irqs_gsi: 40
[Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[Mon Jul 7 22:52:56 2014] e820: [mem 0x80000000-0xefffffff] available for PCI devices
[Mon Jul 7 22:52:56 2014] Booting paravirtualized kernel on bare hardware
[Mon Jul 7 22:52:56 2014] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[Mon Jul 7 22:52:56 2014] PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s87168 r8192 d23424 u1048576
[Mon Jul 7 22:52:56 2014] pcpu-alloc: s87168 r8192 d23424 u1048576 alloc=1*2097152
[Mon Jul 7 22:52:56 2014] pcpu-alloc: [0] 0 1
[Mon Jul 7 22:52:56 2014] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515680
[Mon Jul 7 22:52:56 2014] Policy zone: DMA32
[Mon Jul 7 22:52:56 2014] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
[Mon Jul 7 22:52:56 2014] PID hash table entries: 4096 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] Checking aperture...
[Mon Jul 7 22:52:56 2014] No AGP bridge found
[Mon Jul 7 22:52:56 2014] Calgary: detecting Calgary via BIOS EBDA area
[Mon Jul 7 22:52:56 2014] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[Mon Jul 7 22:52:56 2014] Memory: 2043836K/2095556K available (5224K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 51720K reserved)
[Mon Jul 7 22:52:56 2014] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[Mon Jul 7 22:52:56 2014] Preemptible hierarchical RCU implementation.
[Mon Jul 7 22:52:56 2014] RCU dyntick-idle grace-period acceleration is enabled.
[Mon Jul 7 22:52:56 2014] Dump stacks of tasks blocking RCU-preempt GP.
[Mon Jul 7 22:52:56 2014] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[Mon Jul 7 22:52:56 2014] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[Mon Jul 7 22:52:56 2014] NR_IRQS:8448 nr_irqs:512 16
[Mon Jul 7 22:52:56 2014] Console: colour dummy device 80x25
[Mon Jul 7 22:52:56 2014] console [tty0] enabled
[Mon Jul 7 22:52:56 2014] allocated 8388608 bytes of page_cgroup
[Mon Jul 7 22:52:56 2014] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[Mon Jul 7 22:52:56 2014] hpet clockevent registered
[Mon Jul 7 22:52:56 2014] tsc: Fast TSC calibration using PIT
[Mon Jul 7 22:52:56 2014] tsc: Detected 1997.384 MHz processor
[Mon Jul 7 22:52:56 2014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3996.21 BogoMIPS (lpj=6657946)
[Mon Jul 7 22:52:56 2014] pid_max: default: 32768 minimum: 301
[Mon Jul 7 22:52:56 2014] ACPI: Core revision 20140214
[Mon Jul 7 22:52:56 2014] ACPI: All ACPI Tables successfully acquired
[Mon Jul 7 22:52:56 2014] Security Framework initialized
[Mon Jul 7 22:52:56 2014] Yama: becoming mindful.
[Mon Jul 7 22:52:56 2014] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[Mon Jul 7 22:52:56 2014] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[Mon Jul 7 22:52:56 2014] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys memory
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys devices
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys freezer
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys net_cls
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys blkio
[Mon Jul 7 22:52:56 2014] CPU: Physical Processor ID: 0
[Mon Jul 7 22:52:56 2014] CPU: Processor Core ID: 0
[Mon Jul 7 22:52:56 2014] mce: CPU supports 6 MCE banks
[Mon Jul 7 22:52:56 2014] CPU0: Thermal monitoring enabled (TM2)
[Mon Jul 7 22:52:56 2014] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[Mon Jul 7 22:52:56 2014] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[Mon Jul 7 22:52:56 2014] ftrace: allocating 20226 entries in 80 pages
[Mon Jul 7 22:52:56 2014] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[Mon Jul 7 22:52:56 2014] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (fam: 06, model: 0f, stepping: 06)
[Mon Jul 7 22:52:56 2014] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[Mon Jul 7 22:52:56 2014] perf_event_intel: PEBS disabled due to CPU errata
[Mon Jul 7 22:52:56 2014] ... version: 2
[Mon Jul 7 22:52:56 2014] ... bit width: 40
[Mon Jul 7 22:52:56 2014] ... generic registers: 2
[Mon Jul 7 22:52:56 2014] ... value mask: 000000ffffffffff
[Mon Jul 7 22:52:56 2014] ... max period: 000000007fffffff
[Mon Jul 7 22:52:56 2014] ... fixed-purpose events: 3
[Mon Jul 7 22:52:56 2014] ... event mask: 0000000700000003
[Mon Jul 7 22:52:56 2014] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[Mon Jul 7 22:52:56 2014] x86: Booting SMP configuration:
[Mon Jul 7 22:52:56 2014] .... node #0, CPUs: #1
[Mon Jul 7 22:52:56 2014] TSC synchronization [CPU#0 -> CPU#1]:
[Mon Jul 7 22:52:56 2014] Measured 3679205328 cycles TSC warp between CPUs, turning off TSC clock.
[Mon Jul 7 22:52:56 2014] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[Mon Jul 7 22:52:56 2014] x86: Booted up 1 node, 2 CPUs
[Mon Jul 7 22:52:56 2014] smpboot: Total of 2 processors activated (7992.43 BogoMIPS)
[Mon Jul 7 22:52:56 2014] devtmpfs: initialized
[Mon Jul 7 22:52:56 2014] pinctrl core: initialized pinctrl subsystem
[Mon Jul 7 22:52:56 2014] RTC time: 1:53:00, date: 07/08/14
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 16
[Mon Jul 7 22:52:56 2014] cpuidle: using governor ladder
[Mon Jul 7 22:52:56 2014] cpuidle: using governor menu
[Mon Jul 7 22:52:56 2014] ACPI: bus type PCI registered
[Mon Jul 7 22:52:56 2014] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[Mon Jul 7 22:52:56 2014] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[Mon Jul 7 22:52:56 2014] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[Mon Jul 7 22:52:56 2014] PCI: Using configuration type 1 for base access
[Mon Jul 7 22:52:56 2014] dmi type 0xB1 record - unknown flag
[Mon Jul 7 22:52:56 2014] mtrr: your CPUs had inconsistent variable MTRR settings
[Mon Jul 7 22:52:56 2014] mtrr: probably your BIOS does not setup all CPUs.
[Mon Jul 7 22:52:56 2014] mtrr: corrected configuration.
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Module Device)
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Device)
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(3.0 _SCP Extensions)
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Aggregator Device)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4134 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3EE9 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4378 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED40AF 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Interpreter enabled
[Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[Mon Jul 7 22:52:56 2014] ACPI: (supports S0 S3 S4 S5)
[Mon Jul 7 22:52:56 2014] ACPI: Using IOAPIC for interrupt routing
[Mon Jul 7 22:52:56 2014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Mon Jul 7 22:52:56 2014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[Mon Jul 7 22:52:56 2014] PCI host bridge to bus 0000:00
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [bus 00-ff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf4007000-0xf4007fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf400c000-0xfebfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfed00400-0xfed1ffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xffafffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: reg 0x10: [mem 0xefffc000-0xefffffff 64bit]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: reg 0x20: [io 0xbf80-0xbf9f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: reg 0x20: [io 0xbf60-0xbf7f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: reg 0x20: [io 0xbf40-0xbf5f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: reg 0x20: [io 0xbf20-0xbf3f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80000-0xffa803ff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x10: [io 0x01f0-0x01f7]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x14: [io 0x03f4-0x03f7]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x18: [io 0x0170-0x0177]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x1c: [io 0x0374-0x0377]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x20: [io 0xbfa0-0xbfaf]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: PME# supported from D3hot
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: reg 0x20: [io 0x10c0-0x10df]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: [1002:7145] type 00 class 0x030000
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x14: [io 0xee00-0xeeff]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x18: [mem 0xefdf0000-0xefdfffff]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x30: [mem 0xefe00000-0xefe1ffff pref]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: supports D1 D2
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[Mon Jul 7 22:52:56 2014] acpiphp: Slot [1] registered
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: [14e4:170c] type 00 class 0x020000
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: reg 0x10: [mem 0xef9fe000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: supports D1 D2
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf4007000-0xf4007fff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf400c000-0xfebfffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfed00400-0xfed1ffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xffafffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: Enabled 3 GPEs in block 00 to 1F
[Mon Jul 7 22:52:56 2014] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[Mon Jul 7 22:52:56 2014] vgaarb: loaded
[Mon Jul 7 22:52:56 2014] vgaarb: bridge control possible 0000:01:00.0
[Mon Jul 7 22:52:56 2014] PCI: Using ACPI for IRQ routing
[Mon Jul 7 22:52:56 2014] PCI: pci_cache_line_size set to 64 bytes
[Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x7fed3400-0x7fffffff]
[Mon Jul 7 22:52:56 2014] NetLabel: Initializing
[Mon Jul 7 22:52:56 2014] NetLabel: domain hash size = 128
[Mon Jul 7 22:52:56 2014] NetLabel: protocols = UNLABELED CIPSOv4
[Mon Jul 7 22:52:56 2014] NetLabel: unlabeled traffic allowed by default
[Mon Jul 7 22:52:56 2014] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[Mon Jul 7 22:52:56 2014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[Mon Jul 7 22:52:56 2014] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[Mon Jul 7 22:52:56 2014] Switched to clocksource hpet
[Mon Jul 7 22:52:56 2014] pnp: PnP ACPI init
[Mon Jul 7 22:52:56 2014] ACPI: bus type PNP registered
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00100000-0x7fed33ff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7fed3400-0x7fefffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7ff00000-0x7fffffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffa80000-0xffa83fff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4000000-0xf4003fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4004000-0xf4004fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4005000-0xf4005fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4006000-0xf4006fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4008000-0xf400bfff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] system 00:01: [io 0x04d0-0x04d1] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0xf400-0xf4fe] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0x1080-0x10bf] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0x10c0-0x10df] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0x0809] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0c80-0x0cff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0910-0x091f] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0920-0x092f] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0cb0-0x0cbf] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0930-0x097f] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:08: [dma 4]
[Mon Jul 7 22:52:56 2014] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[Mon Jul 7 22:52:56 2014] system 00:0a: [mem 0xfed00000-0xfed003ff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:0a: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp: PnP ACPI: found 11 devices
[Mon Jul 7 22:52:56 2014] ACPI: bus type PNP unregistered
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 8 [mem 0x80000000-0xefffffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 9 [mem 0xf4007000-0xf4007fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 10 [mem 0xf400c000-0xfebfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 11 [mem 0xfec10000-0xfecfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 12 [mem 0xfed00400-0xfed1ffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 13 [mem 0xfee10000-0xffafffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 1 [mem 0xefd00000-0xefefffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 1 [mem 0x80000000-0x801fffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 1 [mem 0xefa00000-0xefcfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 2 [mem 0xe0000000-0xe01fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 1 [mem 0xef900000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 8 [mem 0x80000000-0xefffffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 9 [mem 0xf4007000-0xf4007fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 10 [mem 0xf400c000-0xfebfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 11 [mem 0xfec10000-0xfecfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 12 [mem 0xfed00400-0xfed1ffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 13 [mem 0xfee10000-0xffafffff]
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 2
[Mon Jul 7 22:52:56 2014] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[Mon Jul 7 22:52:56 2014] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[Mon Jul 7 22:52:56 2014] TCP: Hash tables configured (established 16384 bind 16384)
[Mon Jul 7 22:52:56 2014] TCP: reno registered
[Mon Jul 7 22:52:56 2014] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 1
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: Boot video device
[Mon Jul 7 22:52:56 2014] PCI: CLS 64 bytes, default 64
[Mon Jul 7 22:52:56 2014] Unpacking initramfs...
[Mon Jul 7 22:52:56 2014] Freeing initrd memory: 6828K (ffff88003729a000 - ffff880037945000)
[Mon Jul 7 22:52:56 2014] Simple Boot Flag at 0x79 set to 0x1
[Mon Jul 7 22:52:56 2014] Scanning for low memory corruption every 60 seconds
[Mon Jul 7 22:52:56 2014] futex hash table entries: 512 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[Mon Jul 7 22:52:56 2014] zbud: loaded
[Mon Jul 7 22:52:56 2014] VFS: Disk quotas dquot_6.5.2
[Mon Jul 7 22:52:56 2014] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[Mon Jul 7 22:52:56 2014] msgmni has been set to 4005
[Mon Jul 7 22:52:56 2014] Key type big_key registered
[Mon Jul 7 22:52:56 2014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[Mon Jul 7 22:52:56 2014] io scheduler noop registered
[Mon Jul 7 22:52:56 2014] io scheduler deadline registered
[Mon Jul 7 22:52:56 2014] io scheduler cfq registered (default)
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: device [8086:27a1] has invalid IRQ; check vendor BIOS
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: device [8086:27d0] has invalid IRQ; check vendor BIOS
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: device [8086:27d6] has invalid IRQ; check vendor BIOS
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[Mon Jul 7 22:52:56 2014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[Mon Jul 7 22:52:56 2014] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[Mon Jul 7 22:52:56 2014] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
[Mon Jul 7 22:52:56 2014] vesafb: scrolling: redraw
[Mon Jul 7 22:52:56 2014] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[Mon Jul 7 22:52:56 2014] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004400000, using 7552k, total 7552k
[Mon Jul 7 22:52:56 2014] Console: switching to colour frame buffer device 200x75
[Mon Jul 7 22:52:56 2014] fb0: VESA VGA frame buffer device
[Mon Jul 7 22:52:56 2014] intel_idle: does not run on family 6 model 15
[Mon Jul 7 22:52:56 2014] GHES: HEST is not enabled!
[Mon Jul 7 22:52:56 2014] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[Mon Jul 7 22:52:56 2014] Linux agpgart interface v0.103
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: RTC can wake from S4
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[Mon Jul 7 22:52:56 2014] ledtrig-cpu: registered to indicate activity on CPUs
[Mon Jul 7 22:52:56 2014] TCP: cubic registered
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 10
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 17
[Mon Jul 7 22:52:56 2014] registered taskstats version 1
[Mon Jul 7 22:52:56 2014] Magic number: 6:49:862
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: setting system clock to 2014-07-08 01:53:00 UTC (1404784380)
[Mon Jul 7 22:52:56 2014] PM: Hibernation image not present or could not be loaded.
[Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[Mon Jul 7 22:52:56 2014] Write protecting the kernel read-only data: 8192k
[Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
[Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[Mon Jul 7 22:52:56 2014] random: systemd urandom read with 1 bits of entropy available
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit local-fs.target, ignoring: Unit local-fs.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit swap.target, ignoring: Unit swap.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit slices.target, ignoring: Unit slices.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd-udevd[50]: starting version 214
[Mon Jul 7 22:52:56 2014] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[Mon Jul 7 22:52:56 2014] serio: i8042 KBD port at 0x60,0x64 irq 1
[Mon Jul 7 22:52:56 2014] serio: i8042 AUX port at 0x60,0x64 irq 12
[Mon Jul 7 22:52:56 2014] [drm] Initialized drm 1.1.0 20060810
[Mon Jul 7 22:52:56 2014] ACPI: bus type USB registered
[Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver usbfs
[Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver hub
[Mon Jul 7 22:52:56 2014] usbcore: registered new device driver usb
[Mon Jul 7 22:52:56 2014] SCSI subsystem initialized
[Mon Jul 7 22:52:56 2014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[Mon Jul 7 22:52:56 2014] uhci_hcd: USB Universal Host Controller Interface driver
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[Mon Jul 7 22:52:56 2014] ehci-pci: EHCI PCI platform driver
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: EHCI Host Controller
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: debug port 1
[Mon Jul 7 22:52:56 2014] [drm] radeon kernel modesetting enabled.
[Mon Jul 7 22:52:56 2014] checking generic (d0000000 760000) vs hw (d0000000 10000000)
[Mon Jul 7 22:52:56 2014] fb: switching to radeondrmfb from VESA VGA
[Mon Jul 7 22:52:56 2014] Console: switching to colour dummy device 80x25
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: irq 20, io mem 0xffa80000
[Mon Jul 7 22:52:56 2014] [drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x1028:0x2002).
[Mon Jul 7 22:52:56 2014] [drm] register mmio base: 0xEFDF0000
[Mon Jul 7 22:52:56 2014] [drm] register mmio size: 65536
[Mon Jul 7 22:52:56 2014] ATOM BIOS: ATI
[Mon Jul 7 22:52:56 2014] [drm] Generation 2 PCI interface, using max accessible memory
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (128M used)
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[Mon Jul 7 22:52:56 2014] [drm] Detected VRAM RAM=256M, BAR=256M
[Mon Jul 7 22:52:56 2014] [drm] RAM width 64bits DDR
[Mon Jul 7 22:52:56 2014] libata version 3.00 loaded.
[Mon Jul 7 22:52:56 2014] [TTM] Zone kernel: Available graphics memory: 1026556 kiB
[Mon Jul 7 22:52:56 2014] [TTM] Initializing pool allocator
[Mon Jul 7 22:52:56 2014] [TTM] Initializing DMA pool allocator
[Mon Jul 7 22:52:56 2014] [drm] radeon: 128M of VRAM memory ready
[Mon Jul 7 22:52:56 2014] [drm] radeon: 512M of GTT memory ready.
[Mon Jul 7 22:52:56 2014] [drm] GART: num cpu pages 131072, num gpu pages 131072
[Mon Jul 7 22:52:56 2014] [drm] radeon: power management initialized
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[Mon Jul 7 22:52:56 2014] hub 4-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 4-0:1.0: 8 ports detected
[Mon Jul 7 22:52:56 2014] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[Mon Jul 7 22:52:56 2014] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: WB enabled
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xffff8800370f4000
[Mon Jul 7 22:52:56 2014] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[Mon Jul 7 22:52:56 2014] [drm] Driver supports precise vblank timestamp query.
[Mon Jul 7 22:52:56 2014] [drm] radeon: irq initialized.
[Mon Jul 7 22:52:56 2014] [drm] Loading R500 Microcode
[Mon Jul 7 22:52:56 2014] [drm] radeon: ring at 0x0000000010001000
[Mon Jul 7 22:52:56 2014] [drm] ring test succeeded in 10 usecs
[Mon Jul 7 22:52:56 2014] [drm] ib test succeeded in 0 usecs
[Mon Jul 7 22:52:56 2014] [drm] radeon atom DIG backlight initialized
[Mon Jul 7 22:52:56 2014] [drm] Radeon Display Connectors
[Mon Jul 7 22:52:56 2014] [drm] Connector 0:
[Mon Jul 7 22:52:56 2014] [drm] VGA-1
[Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[Mon Jul 7 22:52:56 2014] [drm] Connector 1:
[Mon Jul 7 22:52:56 2014] [drm] LVDS-1
[Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] LCD1: INTERNAL_LVTM1
[Mon Jul 7 22:52:56 2014] [drm] Connector 2:
[Mon Jul 7 22:52:56 2014] [drm] SVIDEO-1
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] TV1: INTERNAL_KLDSCP_DAC2
[Mon Jul 7 22:52:56 2014] [drm] Connector 3:
[Mon Jul 7 22:52:56 2014] [drm] DVI-I-1
[Mon Jul 7 22:52:56 2014] [drm] HPD1
[Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[Mon Jul 7 22:52:56 2014] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[Mon Jul 7 22:52:56 2014] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[Mon Jul 7 22:52:56 2014] hub 5-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 5-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: version 2.13
[Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[Mon Jul 7 22:52:56 2014] scsi0 : ata_piix
[Mon Jul 7 22:52:56 2014] scsi1 : ata_piix
[Mon Jul 7 22:52:56 2014] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[Mon Jul 7 22:52:56 2014] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[Mon Jul 7 22:52:56 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
[Mon Jul 7 22:52:56 2014] ata1.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8860, max UDMA/133
[Mon Jul 7 22:52:56 2014] ata1.00: 62500000 sectors, multi 8: LBA48 NCQ (depth 0/31)
[Mon Jul 7 22:52:56 2014] ata1.00: configured for UDMA/133
[Mon Jul 7 22:52:56 2014] scsi 0:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5
[Mon Jul 7 22:52:56 2014] ata2.00: configured for UDMA/33
[Mon Jul 7 22:52:57 2014] usb 4-1: new high-speed USB device number 2 using ehci-pci
[Mon Jul 7 22:52:57 2014] hub 4-1:1.0: USB hub found
[Mon Jul 7 22:52:57 2014] hub 4-1:1.0: 4 ports detected
[Mon Jul 7 22:52:57 2014] [drm] fb mappable at 0xD00C0000
[Mon Jul 7 22:52:57 2014] [drm] vram apper at 0xD0000000
[Mon Jul 7 22:52:57 2014] [drm] size 9216000
[Mon Jul 7 22:52:57 2014] [drm] fb depth is 24
[Mon Jul 7 22:52:57 2014] [drm] pitch is 7680
[Mon Jul 7 22:52:57 2014] fbcon: radeondrmfb (fb0) is primary device
[Mon Jul 7 22:52:57 2014] Console: switching to colour frame buffer device 240x75
[Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: registered panic notifier
[Mon Jul 7 22:52:57 2014] [drm] Initialized radeon 2.38.0 20080528 for 0000:01:00.0 on minor 0
[Mon Jul 7 22:53:18 2014] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[Mon Jul 7 22:53:18 2014] scsi 1:0:0:0: CDB:
[Mon Jul 7 22:53:18 2014] cdb[0]=0x12: 12 00 00 00 60 00
[Mon Jul 7 22:53:18 2014] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 2 dma 96 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[Mon Jul 7 22:53:18 2014] ata2.00: status: { DRDY }
[Mon Jul 7 22:53:23 2014] ata2: link is slow to respond, please be patient (ready=0)
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] 62500000 512-byte logical blocks: (32.0 GB/29.8 GiB)
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write Protect is off
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Mon Jul 7 22:53:27 2014] sda: sda1 sda2 sda3 sda4
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Attached SCSI disk
[Mon Jul 7 22:53:28 2014] ata2: device not ready (errno=-16), forcing hardreset
[Mon Jul 7 22:53:28 2014] ata2: soft resetting link
[Mon Jul 7 22:53:28 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:28 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:28 2014] ata2.00: limiting speed to UDMA/33:PIO3
[Mon Jul 7 22:53:33 2014] ata2: soft resetting link
[Mon Jul 7 22:53:33 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:33 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:33 2014] ata2.00: disabled
[Mon Jul 7 22:53:38 2014] ata2: soft resetting link
[Mon Jul 7 22:53:38 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
[Mon Jul 7 22:53:38 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:38 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:38 2014] ata2.00: limiting speed to UDMA/33:PIO3
[Mon Jul 7 22:53:43 2014] ata2: soft resetting link
[Mon Jul 7 22:53:44 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:44 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:44 2014] ata2.00: disabled
[Mon Jul 7 22:53:44 2014] ata2: EH complete
[Mon Jul 7 22:53:44 2014] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
[Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[Mon Jul 7 22:53:44 2014] systemd-udevd[150]: starting version 214
[Mon Jul 7 22:53:44 2014] ACPI: acpi_idle registered with cpuidle
[Mon Jul 7 22:53:44 2014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[Mon Jul 7 22:53:44 2014] ACPI: Battery Slot [BAT0] (battery present)
[Mon Jul 7 22:53:44 2014] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[Mon Jul 7 22:53:44 2014] ACPI: AC Adapter [AC] (on-line)
[Mon Jul 7 22:53:44 2014] acpi device:2d: registered as cooling_device2
[Mon Jul 7 22:53:44 2014] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2a/LNXVIDEO:00/input/input2
[Mon Jul 7 22:53:44 2014] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Mon Jul 7 22:53:44 2014] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[Mon Jul 7 22:53:44 2014] ACPI: Lid Switch [LID]
[Mon Jul 7 22:53:44 2014] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[Mon Jul 7 22:53:44 2014] ACPI: Power Button [PBTN]
[Mon Jul 7 22:53:44 2014] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[Mon Jul 7 22:53:44 2014] ACPI: Sleep Button [SBTN]
[Mon Jul 7 22:53:44 2014] wmi: Mapper loaded
[Mon Jul 7 22:53:44 2014] thermal LNXTHERM:00: registered as thermal_zone0
[Mon Jul 7 22:53:44 2014] ACPI: Thermal Zone [THM] (25 C)
[Mon Jul 7 22:53:44 2014] intel_rng: FWH not detected
[Mon Jul 7 22:53:44 2014] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[Mon Jul 7 22:53:44 2014] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[Mon Jul 7 22:53:44 2014] leds_ss4200: no LED devices found
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: autoconfig: line_outs=3 (0xf/0xe/0x11/0x0/0x0) type:speaker
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: mono: mono_out=0x0
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: dig-out=0x9/0x0
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: inputs:
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: Mic=0x10
[Mon Jul 7 22:53:44 2014] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[Mon Jul 7 22:53:44 2014] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[Mon Jul 7 22:53:44 2014] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[Mon Jul 7 22:53:44 2014] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[Mon Jul 7 22:53:44 2014] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[Mon Jul 7 22:53:44 2014] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[Mon Jul 7 22:53:44 2014] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[Mon Jul 7 22:53:44 2014] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[Mon Jul 7 22:53:44 2014] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[Mon Jul 7 22:53:44 2014] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[Mon Jul 7 22:53:44 2014] kvm: disabled by bios
[Mon Jul 7 22:53:44 2014] input: Dell WMI hotkeys as /devices/virtual/input/input9
[Mon Jul 7 22:53:44 2014] iTCO_vendor_support: vendor-support=0
[Mon Jul 7 22:53:44 2014] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[Mon Jul 7 22:53:44 2014] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[Mon Jul 7 22:53:44 2014] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[Mon Jul 7 22:53:44 2014] gpio_ich: GPIO from 206 to 255 on gpio_ich
[Mon Jul 7 22:53:44 2014] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[Mon Jul 7 22:53:44 2014] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[Mon Jul 7 22:53:44 2014] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:15:c5:4b:f3:24
[Mon Jul 7 22:53:45 2014] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[Mon Jul 7 22:53:45 2014] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[Mon Jul 7 22:53:45 2014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[Mon Jul 7 22:53:45 2014] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 128333
[Mon Jul 7 22:53:45 2014] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[Mon Jul 7 22:53:45 2014] mousedev: PS/2 mouse device common for all mice
[Mon Jul 7 22:53:46 2014] random: nonblocking pool is initialized
[Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[Mon Jul 7 22:53:48 2014] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[Mon Jul 7 23:11:28 2014] b44 ssb0:0 eth0: Link is down
[Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[Mon Jul 7 23:12:54 2014] PM: Syncing filesystems ... done.
[Mon Jul 7 23:12:54 2014] PM: Preparing system for mem sleep
[Mon Jul 7 23:12:55 2014] Freezing user space processes ... (elapsed 0.047 seconds) done.
[Mon Jul 7 23:12:55 2014] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[Mon Jul 7 23:12:55 2014] PM: Entering mem sleep
[Mon Jul 7 23:12:55 2014] Suspending console(s) (use no_console_suspend to debug)
[Mon Jul 7 23:12:55 2014] b44 ssb0:0 eth0: powering down PHY
[Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Stopping disk
[Mon Jul 7 23:12:55 2014] PM: suspend of devices complete after 393.015 msecs
[Mon Jul 7 23:12:55 2014] PM: late suspend of devices complete after 0.713 msecs
[Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] PM: noirq suspend of devices complete after 15.766 msecs
[Mon Jul 7 23:12:55 2014] ACPI: Preparing to enter system sleep state S3
[Mon Jul 7 23:12:55 2014] PM: Saving platform NVS memory
[Mon Jul 7 23:12:55 2014] Disabling non-boot CPUs ...
[Mon Jul 7 23:12:55 2014] smpboot: CPU 1 is now offline
[Mon Jul 7 23:12:55 2014] ACPI: Low-level resume complete
[Mon Jul 7 23:12:55 2014] PM: Restoring platform NVS memory
[Mon Jul 7 23:12:55 2014] Enabling non-boot CPUs ...
[Mon Jul 7 23:12:55 2014] x86: Booting SMP configuration:
[Mon Jul 7 23:12:55 2014] smpboot: Booting Node 0 Processor 1 APIC 0x1
[Mon Jul 7 23:12:55 2014] CPU1 is up
[Mon Jul 7 23:12:55 2014] ACPI: Waking up from system sleep state S3
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[Mon Jul 7 23:12I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back. -
Arabic calender blank in GL after upgrade to 12.1.1
Dear All,
Arabic calender blank after upgrade from 12.0.6 to 12.1.1 in GL application screen, how could i troubleshoot.
english calender working fine,
this arabic calender showing, its blank when we click the date.
please advice me plsHi;
Is there any error message at apache,application log file?
Regard
Helios
Maybe you are looking for
-
Hp office jet pro 8600 won't scan
Wirelessly connected office jet pro 8600 won't scan in windows. I've checked to make sure proper services are running and they are. Started running diagnostics utility and the driver didn't check out but I have the correct one installed and the print
-
Playing .MOV MIDI files in iTunes 10.4
In November last year I saved hundreds of old piano roll MIDI files in QuickTime format and added them to my iTunes library. They played quite happily in iTunes on the Snow Leopard OS. I have just updated to Lion and now the new version of iTunes 10
-
What is "Other" when syncing iPhone & iTunes?
When I try to sync my iPhone with iTunes, I'm now getting a message that the phone can't sync because the "Other" category is taking up 9.98GM. This is a new problem. Previously, I couldn't sync because of too much on my phone and because going th
-
Adobe lightroom has updated a while ago am I better off to get Adobe or are you going to get with it and do the update
-
IMovie unable to finalize project
I have this issue when attempting to Finalize my project. How do I fix this? I have plenty of free disk space (200GB+) and cannot find the project file to open on a different iMac....