Screen blurry and shifts at horizontal halfway point when mouse moves??

i thought my glasses were dirty today... but after cleaning them i realize my screen is slightly blurred. it seems to only effect one half of the screen at any given moment and depends on the location of my mouse pointer. if it is in the top half of the screen the text there will be sharp and the lower half will be blurry and vise versa. Also it's as if the screen is stretching a few pixels because the bottom shifts noticeably. This is a tremendous nuisance and is making my eyes hurt.
please advise...
i have apple care.
thanks,
~andon

Try using he key sequence option ⌘ 8. You may have accidentally turned zoom on in *Universal Access* in *System Preferences*

Similar Messages

On my Cinema Display the screen is blurry and shifts with mouse movement.

I have had this screen for a year and a half and only use it once a week in my remote office. This morning I noticed blurring on the screen and the whole screen shifts up/down, left/right with mouse movement. Please help. I am getting a headache.
Thanks In Advance,
Rob

Press Command-Option-8 once or twice.
You have Zoom on. It is controlled in "Seeing" in "Universal Access" system preference, and by Control-Scrollwheel.

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt cmd esc. Ideas?

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt+cmd+esc. Ideas?

I have never seen it but then I run SL which is much more reliable than Lion..
See
http://pondini.org/TM/E4.html
Check the master guru of all TM problems.

I just updated tosystem10.6.8. I am running Iphoto 08 version 7.1.5 Quick time movies will not open and play directly in Iphoto. When I move them to my desktop they play fine.Quick time 10.0 What do I need to do?

I just updated tosystem10.6.8. I am running Iphoto 08 version 7.1.5 Quick time movies will not open and play directly in Iphoto. When I move them to my desktop they play fine.Quick time 10.0 What do I need to do?

You need to download and install QuickTime Player 7 for Mac OS X v10.6.3 or later
OT

Firefox screen blurry and unreadable (as if way out of focus); don't know how to correct. Browser is unusable. Disappointed in Mozilla cust svc.

As stated, Firefox screen is blurry and unreadable (as if way out of focus). One day, it worked; the next, it did not. Not sure if there was an upgrade as I did not request or accept one. All I know is Firefox is unusable and I've had to switch to another browser just to get online. You cannot do anything in Firefox because everything is illegible.

Try launching Firefox while holding the '''Shift''' key to open the Firefox SafeMode, and see how it is.
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Troubleshoot Firefox issues using Safe Mode] << Read about the Firefox SafeMode here.

HT1766 screen blurry and images inside vibrates

im not sure what does happening to my iphone4 but it seems blurry and sometimes the images vibrate inside the screen , im so noob
pls , i need help will be appreciate it so much , thank you .

Put the device in a container with uncooked white rice, for at least 72 hours. This may help the issue, but water/snow and electronics do not mix, and the device may need to be replaced.
For an iPhone 4S, unless you have AppleCare Plus, the cost is $199 USD + tax.

Macbook pro screen blurry and picture jumping

Hi, when I turn on Macbook it has a double picture overlapping that is blurry and jumping.
cant see disc utility cause everything is vibrating and blurry.
Any help?Thanks

No known problems with the 13" models as they don't have the discrete AMD Radeon GPU.
However, your problem could be either with the integrated GPU or the screen. The only way that you can know for certain is to take your machine to your local Apple Store (be certain to make an appointment!) or an AASP for a free diagnostic test and estimate for repair.
Good luck,
Clinton

Shots come back to FCP looking blurry (and shifted!)

Here's the deal:
DVCPRO HD 720p60 footage sent to COLOR (from FCP). Minor adjustments made (color grading in a basic mask shape, NOT using the geometry room). I am NOT reframing anything. I render using the original clip settings. I also tried 12 bit, 16 bit, and floating bits.
When shots come back to FCP, they look blurred. Something like a 1-2 pixel blur. Also, the shots are displaced by 1 or 2 pixels upwards, and to the left. The "shift", I can live with. The blur, I cannot.
I read a lot of messages on this board, but nothing helps so far.
Any tips???
Thanks!

1248x702 -- not a typo?
DVC Pro is an anamorphic format and the native aspect ratio is 4x3. Quicktime is fixing this because it recognizes the codec and can deal with the non-square intended/implied aspect ratio.
COLOR doesn't deal with this at all, and will send back whatever you submit as if it were square.
FCP is trying to fit the new square footage into the codec's "round hole". The blur and shift are obvious in your resolution settings ... 702 is going to shift the image 18 pixels. and 1248 should be 1280.
You get the real truth, and not some interpretation of it, when you navigate to the original media through COLOR's browser. You'll probably find another set of interesting numbers if you do that.
Even codecs that you thought were one thing are being masked sometimes by Quicktime and FCP. The AJA 10-bitRGB codec is a good example of mis-reporting under the various applications.
I expect you are getting either a red or green RTE line on the FCP sequence?
jPo

X200t screen flickers when mouse moves off the right screen edge in secondary landscape orientation

I just got my 1st lenovo tablet pc (x200t multi-touch w7 32bit). However, my first experience is not so smooth.
I am having a screen flicker issue in secondary landscape mode (not the default landscape mode) whenever I move my mouse beyond the right edge of the screen. From the symptom, it seems like Windows 7 didn't stop the mouse from moving out of the screen, and hence Windows 7 tries to redraw everything from the top up to the cursor repeatitively (i.e. flickering)
In other orientation, the mouse is actually stopped before moving out of the screen because I can still see the edge of the cursor when I move to far right.
Does anyone know of a solution? If not, I would like to know if anyone else experience this issue. You can reproduce this by
1. rotation the screen orientation until buttons on the screen is at the top of the screen (i.e. the secondary landscape orientation)
2. move your move beyond the right edge of the screen.
3. screen starts to flicker
I have updated all the drivers and software via Windows Update and Lenovo ThinkVantage.
ThinkPad BIOS Update 3.11-1.04
ThinkPad Power Manager 2.05
Lenovo Fingerprint Software for Windows 7 32 bit 3.3.0.58
Lenovo thinkVantage Toolbox (32-bit) 6.0.5449.31
Here is my configuration
Intel Core 2 Duo SL9400 (1.86GHz, 6MB L2, 1066MHz)1
Genuine Windows 7 Professional 3212
12.1" Enhanced Multitouch WXGA LED Panel with Wide viewing Angle
Intel Graphics Media Accelerator 4500MHD
2 GB PC3-8500 DDR3 SDRAM 1067MHz SODIMM Memory (1 DIMM)8
TrackPoint
160GB Hard Disk Drive, 5400rpm4
Integrated Bluetooth PAN
Intel WiFi Link 5100 (AGN) with My WiFi Technology10
Integrated Mobile Broadband - Upgradable65
ThinkPad X200 Tablet 4 Cell Li-Ion Battery60
7448: 1 Year Depot Warranty - TopSeller7
Thanks

Could you be a little more specific? I took that section out of my CSS file but the problem persists.
Thank you.
Sincerely,
Michael Yannetta
Mio Web Designs
530-414-3313
[email protected]

Why does my screen show all windows when mouse moves

When moving the mouse my display shifts to showing all open windows. Why is this happening all of a sudden?
Have checked Disk Warrior and restarted, but it keeps doing this!

What should be in each spot??
Whatever you use the most. As an example I'm right handed to I set the button on the right to Seconday Button so I can take advantage of the menus available for going back a page, reloading a page, etc., when right clicking.
I use the left button to switch between Applications.
It's just a matter of what works best for you

Audio and video are not in sync when playing movies in iTunes

I have downloaded several movies from the iTunes store, and also ripped two digital copy discs into my iTunes library. When I try to play them, the audio is not in sync with the video. Very frustrating when you see the characters lips move, then about a second or two after, you hear what they were saying.
Any help with this would be greatly appreciated. I am running most current version of iTunes, and QuickTime.

I have looked a little bit more, and it seems as though the video is lagging behind, not the other way around. Video seems choppy, but the audio is playing perfectly. Music Videos are suffering from the same problem as well. Also, when I sync to my iPod Touch 16GB, audio & video match up perfectly.
I still have no idea how to fix this. Please help.

Apple TV and UK iTunes... When are movies going to be released Apple?

Would love to buy Apple TV but not until movies are made available on iTunes in the UK - any ideas when this is likely to happen? I thought this was a done deal for 2007?

This just out on CNN:
http://www.cnn.com/2007/TECH/biztech/12/28/apple.movies.ap/index.html

Not able to use Shift field and Shift Grouping field while using OPK0

Hi,
I am using the SAP ECC 6.0 Enhancement Pack-4,
In Transaction 'OPK0' while confuguring the default value for shift in the *Default* Tab, i am getting the 'Shift - field:SHIFT_PROP('Proposal Shift for Single-Screen Entry') and Shift Grouping, in Display mode, i have also tried to configure it with SAP4all authorization, but still it was in Non editable mode.
Also i tried applying Note:1177952, but was not able to apply the same, as we are already using Enhancement pack-4.
let me know the solution to the above problem.
Best Regards
Vijay

Hi Vijay,
please follow the link given below and check whether the business function LOG_PP_SRN_CONF is activated or not?
http://help.sap.com/erp2005_ehp_03/helpdata/EN/e9/dc4715919d4245a9416c668b66133c/content.htm
Regards,Kundan

I can see scan (interlace) lines on my screen! and home dock flicker!

Hi
I have noticed looking at my iphone display i'm getting horizontal scan lines when I move my eyes from top to bottom of the display there very faint but annoying and seem to happen more on greys.
I have noticed on full bright screen the gray band at the back of the iphone apps (the dock) on the home screen flickers rapidly like a 60hz crt monitor flicker.
Is this normal or a defect?

Yes no lighting nearby Its like my screens slower to refresh then my previous iphone its more easy to see when on full bright the display flickers towards the bottom on the grey band almost pulseing/shimmer just like a bad floresent tube!
If I tip the phone the screen breaks into faint scan lines like them animated pictures u can get by tipping them!

Capture border, mouse movements and screen area showing incorrectly

I'm using Captivate4 on Win7 Pro 32bit to record a web demonstration on IE8. Setting the capture area only records a portion of the selected area, and portions outside (and including) the red boundary line. Mouse movements and clicks are also off. I've disabled hardware acceleration and tried a few different screen resolutions.
This occurs in every recording mode and in every capture arrangement - application, predefined, or custom size. Full screen recording captures the correct area, but the slides are very large and cursor actions are still off. The border disappears when Hide is checked, but the area captured is still completely different from the area selected.
I've included screenshots of both the capture area selected and the actual area recorded.
If anyone can help, I'd really appreciate it - thanks in advance!
Area selected for recording:
Area captured during recording - cursor out of place, overlap on the left, missing area on right and bottom:

Change your computer screen resolution to match what you set in Captivate, and you will capture everything.
I had to change mine from 1920x1080 (on a 13" laptop) to 1280x720 which is the maximum in Captivate. As soon as I did that, the entire screen was captured as intended.

Screen blurry and shifts at horizontal halfway point when mouse moves??

Similar Messages

Maybe you are looking for