Screen calibration off

Hy all,
my ipad screen seems be be miscalibrated. the exact point i touch seems to be registered about 5mm higher than i actually touched the screen.
anyone else with this problem? any hints?
thanks and cheers,
tammof

Couldn't find anything about your specific problem. Just some general troubleshooting tips.
iPad: Basic Troubleshooting, http://support.apple.com/kb/TS3274
iPad: Troubleshooting touchscreen response, http://support.apple.com/kb/TS3293

Similar Messages

  • Just got my new iPad Air and noticed that the screen calibration is off. For example if I select the circle to place something there I have to select outside of the circle to make it happen. I did not have this issue on my previous iPad.

    Just got my new iPad Air and noticed that the screen calibration is off. For example if I select the circle to place something there I have to select outside of the circle to make it happen. I did not have this issue on my previous iPad.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If no fix, Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • I have an iPad 2 and all of a sudden I have no sound in game apps. I have usual volume in videos and YouTube, I do get volume for games if I plug in headphones. I have switched to screen lock off and on again and I have also done a reset twice.....help :)

    I have an ipad2 and all of a sudden I have stopped getting sound in my game apps. I get normal sound on YouTube and I player and downloaded DVDs. If I plug headphones in then I can get sounds for the games. I have switched the lock screen button off and on again and done a reset twice, can anyone help me with this?

    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
     Cheers, Tom

  • Verizon galaxy nexus-music skips and static when screen is off..

    What i do is download videos using youtube
    downloader and convert them into mp3. Then i connect my phone to the laptop with
    the usb cable. I open my computer-galaxy nexus-music, and i drag the saved mp3
    from my laptop to my phone. When i disconnect the phone,I open the music app and
    I listen to my music and it sounds fine when the screen is on. When the screen
    is Off the music starts to skip a little and i hear static with or without
    headphones. Now i used the same procedure when i load music from my laptop with
    other mp3 devices and ipods and the music sounds good when the screen is on or
    off with those devices. I downloaded a song from the android market and amazon,
    stored it and downloaded to my phone for offline play and both songs stutter or
    static when screen is off.

    From the beginning, I wasn’t too impressed by the Galaxy Nexus. Why? It’s a Samsung. Would I purchase a Samsung for a basic phone? Sure, but when it comes to “top of the line” smart phones, Samsung wouldn’t be my first, second or even third choice. Now, don’t get me wrong, I contemplating parting with 299.99 to purchase the Nexus. The ics appeal outweigh some of my skepticism.. but before I buy a phone, I sit on review boards, cnet reviews, youtube reviews, etc. etc. In addition, it’s hard to trust a new phone of its kind. All the kinks (clearly) haven’t been ironed out. I, like Rushfan2112 went with the Rezound. And I LOVE it.
    But do I think the Nexus is a “poor” phone? Na. Not by a long shot. Does VZW hinder the devices full potential? Of course – but we as Verizon customers should already know this – they proved so with the Iphones. Moreover, I’m a bit confused by the lack of update to the OS as well. This phone was specifically designed and released. It’s not as if we’re waiting for a complete OS change like HTC Rezound, Rhyme, & Motorola Bionic, 4 and Razr customers are. I understand that takes time because the OS has to be modified for each device. But the Nexus started with ICS, the ambiguity in the software updates is ridiculous….

  • Yoga 2 13 Tablet Screen turns off when in Tablet Mode

    I just bought my Yoga 2 13, when I flip it to Tablet mode, the screen turns off. Apparently it goes to sleep. When I open it it turns on again. Do I need to do any adjustments? or is this a defect?

    Try updating your drivers first: http://mobilesupport.lenovo.com/us/en/products/lap​tops-and-netbooks/yoga-series/yoga-2-13-notebook-l​...
    If that does not help, try a factory reset:
    1. Turn off your Yoga 2 13
    2. Press the tiny button next to the power button on the right
    3. Follow instructions to perform a factory reset
    If none of the above attempts have helped you, it is probably a hardware issue.
    Jonas
    Microsoft MVP: Windows Consumer Expert
    Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
    Twitter: @jonashendrickx

  • I downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm

    i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi  i try all the ways to turn it on but it didnt sucsses

    roaminggnome 
      thanks for helping but i didnt know that is the downgrade is forbidden  and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>> 

  • Cannot install windows 7 using boot camp because screen turns off?

    I have a late 2008 Macboook Pro 15 inch
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400M 256 MB
    Software  OS X 10.9
    After partition is complete through boot camp my mac restarts to instal Windows 7
    The disk can be heard booting up but my screen is turned off.
    After a min or so the keyboard goes active but screen remains off.
    The disk is a store bought copy of windows 7
    I have tried different installers and the same thing occurs the screen just turns off. You can hear the computer running but cannot see anything or do anything.
    Have to hold down the power button to restart.
    I tried booting it through a bootable usb same thing occurs.
    Tried dowloadin drivers and putting them on MBRFAT usb like recomended for iMacs with a similar porblem. That Failed too.
    Tried connecting a different monitor it didnt work.
    So I am stumped has anyone had this problem. Not the black screen the screen being tuned off.
    Ive been searching for days and havent found an answer realting to MBP.

    Hold the option while turning on the computer. You should see your statup drives. Just choose the OS X drive and eject your disc once in OS X.

  • Black screen/turns off random bootcamp windows 7

    I have a imac 27" mid 2010 and i am using windows 7 x64 ultimate on bootcamp (3.3 and later 4.0) from snow leopard to lion, i have
    recently upgraded my mac with mountain lion.
    But after i did upgrade to mountain lion a day later my screen in bootcamp goes black/turns off. I can sometimes hear the sounds when it happens.
    The black screen/turn off, is also randomly so its not happening when i do something or opening something. So after a few black-outs i started to get fustrated and i surfed the web for solutions (Option + Alt + P + R), disconnect power cord wait 10 seconds and reconnect, install/uninstall new drivers, reinstalling windows. reinstalling mountain lion and windows but the problem is stil there.
    But when using mountain lion i dont have any problems everything works fine.
    I think that mountain lion has changed something to the firmware or bios of the system, or changed something to bootcamp?
    I really dont know, the only thing i know is i cant use windows as i normally did, and my boss isnt happy when i dont finish my work.
    I really need some answers and solutions.
    Thanks

    Same problem occuring for me, although Windows 7 boots fine in safe mode but when booting in regular mode after the lauch screen it goes black and turns off. Funny thing is that mountain lion didn't seem to be the problem for me instead I believe windows updated it's software for me and then it started happening. Im going to try and reformat partition reinstall windows 7.
    oh BTW I'm on Macbook Pro x Retina Display.

  • Freezing when screen shuts off

    When my macbook has its screen shut off, I am unable to turn it back on. It isn't in sleep mode. When I press a button or anything, the screen stays black. Closing the cover when it's like this doesn't put it to sleep. It usually happens when I have a Firefox or Chrome window open. How can I fix this?

    My issue is resolved.  Turns out I had a defective unit.  Swapped it out last night, and it's working fine now.  Got the yellow box this time.  First one had the black slip cover.
    The swap was a bit of a hassle.  I had purchased from an Absolute Wireless store in Garner, NC.  That's a third party reseller.  They made me drive across town to a Sprint service center to have a technician "certify" the defect before they would replace it.  And of course, the service center couldn't do the replacement, so I had to drive back across town to point of purchase after they certified it.  Best of all, the "certification" process involved me explaining the problem to the technician for about a minute, her agreeing with me that it was a malfunction, and her writing her employee ID on the back of a business card for me to take back to the first store.  She didn't even turn the phone on herself.  She pretty much said the guy at Absolute Wireless was being a **bleep** in sending me to her in the first place b/c we could have just done this over the phone.  PITA.  But whatever, I guess that's what I get for not buying directly from Sprint.

  • My iphone6 screen is off since last few days i have tried all the options like pressing the home and sleep button together but still its not switching it on before it was getting hanged quite often it had full battery charged but still it is off

    my iphone6 screen is off since last few days i have tried all the options like pressing the home and sleep button together but still its not switching it on before it was getting hanged quite often it had full battery charged but still it is off can anyone please help ......

    hi i m currently in pakistan and there is no apple store here . i will b back to australia after 2 weeks i was wondering if thei can b any fix as i have all my contacts and everything else in my mobile

  • One of my two screens stays off after coming from standby - OSx 10.10.2 MacMini

    When 'reviving' my macmini after not using it for a while one of my screens stays black (The screen stays off so there is no contact from the mac). Even after logging in again the screen stays black.
    I can get it to work again by disconnecting both screens and plugging them back in, but that is not a real solution of course. Also, after switching the position of the screens the other screen stays off, so the problem should be in the connection.
    I've got a relatively new MacMini with OSx 10.10.2 and have the two screens (same size but not identical) attached via two 'mini displayport to DVI adapters'.
    Does anyone have any idea what can cause this?

    Hi Snery,
    Welcome to the Apple Support Communities!
    I know you have already started some troubleshooting for this situation where your second monitor is not connecting when you wake your Mac mini from sleep. To continue this troubleshooting process, I would suggest reading over and working through the steps in the attached article to help isolate and resolve this issue. 
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Best regards,
    Joe

  • Screen turns off after a few minutes and needs to be closed then opened

    hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
    thanks
    ross

    Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
    Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
    Cheers,
    Daniel

  • How to reject a Call when i phone's screen is off ??

    How to reject a Call when i phone's screen is off ??

    notyou wrote:
    The 7.1 update now includes this functionality on the lock screen.
    Never mind. I am incorrect. Sorry.

  • I am using iphone 4s the screen is off, and the phone is hot

    I AM USING IPHONE 4S THE SCREEN IS OFF AND THE PHONE IS HOT, PLEASE WHAT CAN I DO ?
    THANK YOU
    BRIGHT MENSAH

    Hey Bright Mensah,
    Thanks for the question. If I understand correctly, the screen is blank and the iPhone is hot. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    Keeping iPhone, iPad, and iPod touch within acceptable operating temperatures - Apple Support
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • S890 screen turns off while playing games

    I bought this phone a week ago.Everything about this phone is awesom except one thing. The screen turns off while playing games automatically,which is really annoying. Is there any fix for this??

    Graphics card springs to mind;
    also, in your game settings, in either options or video settings (or similar). Are the settings correct for your card. I know on a low end PC, "full hardware acceleration" can cause crashing.
    I'd still think, it's more a graphics related problem. If you have a big flat screen mintor (e.g 24,27 or even 30") then that, in it's own right needs a good card. Add the game to it and you may have problems. I do take it you have compared the specs with what's required on the box (of the game) and "about this mac/"more info"). All the best.

Maybe you are looking for

  • Strange error when running ADFBC on Jboss 4.0.3SP1

    jdeveloper : 10.1.3.3.0.4157 jboss : 4.0.3SP1 database: Oracle10g I have developed a simple JSP page which talks to a table in the database using ADFBC, while I was developing I was using the OC4J server that comes with JDeveloper it runs fine, I dep

  • Email programs: Mac 2.0.7 verses Eudora for Mac???  which do you prefer

    I can get Eudora for Mac free through school. Is there any advantage to Eudora over the Mac email that came with my Powerbook? Eudora seems to have a few extra features (plus I'm familiar with it. Eudora seems a bit more complicated, but I use email

  • How to process the Received Idoc in SAP R/3 ? What to be done ?

    Hi All I am working for file to Idoc scenario..... Idoc received into SAP R/3 but how to process the Idoc data ? Such it will store in SAP R/3 DB..... Clearly How to Process the received idoc data into SAP R/3 ? (this is for inbound idoc) I hope any

  • JTabbedPane with JSplitPane - HELP !!!

    What am I missing??? I have a JSplitPane in a TabbedPane. The topComponent contains a JComboBox with Key values, the Bottom Component will display details based on the key value passed. The bottomComponent has 2 constructors: one default and one acce

  • Task flexfield doesn't open

    Hi All, Sometimes the flexfield from the task tab in the service request doesn't open, as if it is inactivated. This is a random stuff and we couldn't find the reason. Did one of you had the same problem? Thanks, Dora