Screen Capture goes where?

I've found a few threads discussing this topic, none of which help me.
I installed Leopard through a clean install. Actually, first I upgraded then I archived and installed, lastly I formated and started fresh. That, however, outside of the scope of this discussion.
I am unable to successfully screen capture using Shift-Command-4. The camera snaps. No image is saved.
Some have suggested deleting .globalpreferences.plist file. I cannot figure out how to un-hide this file to delete it.
Does anyone have any suggestions?

In the continuing hope that someone might be able to help I'll post my crashlog
Process: screencapture [3315]
Path: /usr/sbin/screencapture
Identifier: screencapture
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [1]
Date/Time: 2007-11-19 06:40:59.183 +0200
OS Version: Mac OS X 10.5.1 (9B18)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Application Specific Information:
* Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[NSCFString _getValue:forType:]: unrecognized selector sent to instance 0xa00e99e0'
Thread 0 Crashed:
0 com.apple.CoreFoundation 0x910cd114 __TERMINATING_DUE_TO_UNCAUGHT_EXCEPTION__ + 4
1 libobjc.A.dylib 0x902b909b objcexceptionthrow + 40
2 com.apple.CoreFoundation 0x910d446a -[NSObject doesNotRecognizeSelector:] + 186
3 com.apple.CoreFoundation 0x910d2a6c __forwarding__ + 892
4 com.apple.CoreFoundation 0x910d2b32 CF_forwarding_prep0 + 50
5 com.apple.CoreFoundation 0x91037da8 CFNumberGetValue + 2728
6 screencapture 0x00002f5b 0x1000 + 8027
7 screencapture 0x00005ef5 0x1000 + 20213
8 screencapture 0x00006213 0x1000 + 21011
9 screencapture 0x00006861 0x1000 + 22625
10 screencapture 0x0000193e 0x1000 + 2366
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0xa00d80f0 ebx: 0x902b907c ecx: 0xa00d71a0 edx: 0x0000f000
edi: 0xa02b6f00 esi: 0xa00e99e0 ebp: 0xbffff648 esp: 0xbffff648
ss: 0x0000001f efl: 0x00000286 eip: 0x910cd114 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x0011f000
Binary Images:
0x1000 - 0x7fff +screencapture ??? (???) <e199f7fb839bf6624db61a6ac1e073e9> /usr/sbin/screencapture
0x200000 - 0x2e6ff7 com.apple.RawCamera.bundle 2.0 (2.0) /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
0x8fe00000 - 0x8fe2d883 dyld 95.3 (???) <81592e798780564b5d46b988f7ee1a6a> /usr/lib/dyld
0x900c1000 - 0x9013dfeb com.apple.audio.CoreAudio 3.1.0 (3.1) <70bb7c657061631491029a61babe0b26> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x9017c000 - 0x90247fff com.apple.ColorSync 4.5.0 (4.5.0) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x90248000 - 0x9026ffff libcups.2.dylib ??? (???) <6b61eb99e6f5dd2d66cd224e9f82427d> /usr/lib/libcups.2.dylib
0x90270000 - 0x902affef libTIFF.dylib ??? (???) <6d0f80e9d4d81f3f64c876aca005bd53> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x902b0000 - 0x9038ffff libobjc.A.dylib ??? (???) <5eda47fec2d0e7853b3506aa1fd2dafa> /usr/lib/libobjc.A.dylib
0x903f5000 - 0x9044fff7 com.apple.CoreText 2.0.0 (???) <7fa39cd5bc847615ec02e7c7a37c0508> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x90479000 - 0x904f0fe3 com.apple.CFNetwork 220 (220) <0ae8fbcbadcb9bd8d673aa4531c0fcfc> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x909be000 - 0x909c9fe7 libCSync.A.dylib ??? (???) <df82fc093e498a9eb5490761cb292218> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x909ca000 - 0x90a5cff3 com.apple.ApplicationServices.ATS 3.0 (???) <fb5f572243dbc370a0ea5efc8e81ae11> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x90a65000 - 0x90ab5ff7 com.apple.HIServices 1.6.0 (???) <d74aa73e4cfd30a08fb169198a8d2539> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x90c36000 - 0x90d7bff7 com.apple.ImageIO.framework 2.0.0 (2.0.0) <154d4d8cda2bd99518cbabc9f2d69833> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x90d7c000 - 0x90e23fff com.apple.QD 3.11.50 (???) <e2f71720ae1dad06a8883ac80775b21a> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x90e43000 - 0x90e9cfff libGLU.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x90fe1000 - 0x91113fe7 com.apple.CoreFoundation 6.5 (476) <8bfebc0dbad6fc33bea0fa00a1b9ec37> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x91161000 - 0x917f8fef com.apple.CoreGraphics 1.351.0 (???) <7a6f399039eed6dbe845c169f7d21a70> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x9208c000 - 0x92142fe3 com.apple.CoreServices.OSServices 210.2 (210.2) <4ed69f07fc0f211ab32d1ee96e281fc2> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x9215f000 - 0x92166ffe libbsm.dylib ??? (???) <d25c63378a5029648ffd4b4669be31bf> /usr/lib/libbsm.dylib
0x9237b000 - 0x9242bfff edu.mit.Kerberos 6.0.11 (6.0.11) <33c25789baedcd70a7e24881775dd9ad> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x9242c000 - 0x9244afff libresolv.9.dylib ??? (???) <54e6a08c2f108bdf5916fb483d51961b> /usr/lib/libresolv.9.dylib
0x9244b000 - 0x92461fff com.apple.DictionaryServices 1.0.0 (1.0.0) <ad0aa0252e3323d182e17f50defe56fc> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x924b4000 - 0x924b4ff8 com.apple.ApplicationServices 34 (34) <8f910fa65f01d401ad8d04cc933cf887> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x924b5000 - 0x9260ffe3 libSystem.B.dylib ??? (???) <8ecc83dc0399be3946f7a46e88cf4bbb> /usr/lib/libSystem.B.dylib
0x9264e000 - 0x9264ffef libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x92650000 - 0x926cfff5 com.apple.SearchKit 1.2.0 (1.2.0) <277b460da86bc222785159fe77e2e2ed> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x926d0000 - 0x926ddfe7 com.apple.opengl 1.5.5 (1.5.5) <aa08b52d2a84b44dc6ee5d544a53fe8a> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x9271b000 - 0x9271dff5 libRadiance.dylib ??? (???) <20eadb285da83df96c795c2c5fa20590> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x92777000 - 0x92777ffd com.apple.Accelerate 1.4 (Accelerate 1.4) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x92778000 - 0x929f1fe7 com.apple.Foundation 6.5.1 (677.1) <85ac18c7cd454378db6122bea0c00965> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x929f2000 - 0x92e02fef libBLAS.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x92ee8000 - 0x92ee8ffd com.apple.vecLib 3.4 (vecLib 3.4) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x92f37000 - 0x932f5fea libLAPACK.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x944f6000 - 0x9462eff7 libicucore.A.dylib ??? (???) <afcea652ff2ec36885b2c81c57d06d4c> /usr/lib/libicucore.A.dylib
0x9462f000 - 0x9463ffff com.apple.speech.synthesis.framework 3.6.59 (3.6.59) <4ffef145fad3d4d787e0c33eab26b336> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x9468b000 - 0x94712ff7 libsqlite3.0.dylib ??? (???) <273efcb717e89c21207c851d7d33fda4> /usr/lib/libsqlite3.0.dylib
0x94725000 - 0x94749fff libxslt.1.dylib ??? (???) <4933ddc7f6618743197aadc85b33b5ab> /usr/lib/libxslt.1.dylib
0x94772000 - 0x9477afff com.apple.DiskArbitration 2.2 (2.2) <1551b2af557fdf6f368f93e093933852> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x9477b000 - 0x947bcfe7 libRIP.A.dylib ??? (???) <bdc6d70bf4ed3dace321b4ff76a353b3> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x947bd000 - 0x948e1fe3 com.apple.audio.toolbox.AudioToolbox 1.5 (1.5) /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x94a39000 - 0x94aadfef libvMisc.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x95496000 - 0x95522ff7 com.apple.LaunchServices 284 (284) <0fb50a7a6fd38875f727fc2592a496e4> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x956a2000 - 0x956d1fe3 com.apple.AE 402 (402) <994ba8e884aefe7bf1fc5987df099e7b> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x956d2000 - 0x956edffb libPng.dylib ??? (???) <b6abcac36ec7654ff3e1cfa786b0117b> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x956ee000 - 0x956fcffd libz.1.dylib ??? (???) <5ddd8539ae2ebfd8e7cc1c57525385c7> /usr/lib/libz.1.dylib
0x95701000 - 0x95746fef com.apple.Metadata 10.5.0 (398) <4fd74fba0062c2e08ec4b1c10b40ff63> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x95747000 - 0x95774feb libvDSP.dylib ??? (???) <a26683d121ee0f96df9a9d0bfca36049> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x95785000 - 0x9584cff2 com.apple.vImage 3.0 (3.0) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x9584e000 - 0x95884fff com.apple.SystemConfiguration 1.9.0 (1.9.0) <7919d9588c3b0d556646e555b7193f1f> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x95885000 - 0x9588cfe9 libgcc_s.1.dylib ??? (???) <f53c808e87d1184c0f9df63aef53ce0b> /usr/lib/libgcc_s.1.dylib
0x95912000 - 0x959f3ff7 libxml2.2.dylib ??? (???) <450ec38b57fb46013847cce851001a2f> /usr/lib/libxml2.2.dylib
0x95a57000 - 0x95ae1fff com.apple.framework.IOKit 1.5.1 (???) <5176a7383151a19c962334009fef2c6d> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x95b51000 - 0x95b61ffc com.apple.LangAnalysis 1.6.4 (1.6.4) <cbeb17ab39f28351fe2ab5b82bf465bc> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x95b8a000 - 0x95b8affc com.apple.audio.units.AudioUnit 1.5 (1.5) /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x95bea000 - 0x95c14fef libauto.dylib ??? (???) <d468bc4a8a69343f1748c293db1b57fb> /usr/lib/libauto.dylib
0x95ca9000 - 0x95d06ffb libstdc++.6.dylib ??? (???) <04b812dcec670daa8b7d2852ab14be60> /usr/lib/libstdc++.6.dylib
0x95d07000 - 0x95d07ffa com.apple.CoreServices 32 (32) <2fcc8f3bd5bbfc000b476cad8e6a3dd2> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x95d08000 - 0x95fe1fe7 com.apple.CoreServices.CarbonCore 783 (783) <8370e664eeb25edc98d5c1f5405b06ae> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x95fe2000 - 0x95fe6fff libGIF.dylib ??? (???) <d4234e6f5e5f530bdafb969157f1f17b> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x95fe7000 - 0x95fe7ffd com.apple.Accelerate.vecLib 3.4 (vecLib 3.4) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x96098000 - 0x960a4ff5 libGL.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x960e8000 - 0x962b1fef com.apple.security 5.0.1 (32736) <8c9eda0fcc1d8a571543025ac900715f> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x962b2000 - 0x962d1ffa libJPEG.dylib ??? (???) <0cfb80109d624beb9ceb3c43b6c5ec10> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x962d2000 - 0x9634cff8 com.apple.print.framework.PrintCore 5.5 (245) <9441d178f4b430cf92b67bf346646693> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x9642d000 - 0x964dfffb libcrypto.0.9.7.dylib ??? (???) <330b0e48e67faffc8c22dfc069ca7a47> /usr/lib/libcrypto.0.9.7.dylib
0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib

Similar Messages

HT201361 Can I change the directory where screen capture saves the png files?

hi:
screen capture questions:
1) Can I change the directory/place where the macbook (maverick osx) screen capture it putting the png/images?
Currently it is going to my desktop and I would like it in another spot.
2) Can I change the default name to include a number e.g so each screen capture increments by 1 rather than telling sequence by time?
thankyou

If you use the Grab.app in Applications/Utilities, you can name the file whatever you want and place it whereever you want. Filenames are not automatically incremented, however.
The disadvantage is that it saves the capture only in .tiff format, not .png
But double-clicking on the saved .tiff file will open it in Preview.app, and you can then Option+Save As in .png format in that same folder, or elsewhere.
Grab.app has some other nice features too, such as selecting a cursor shape to be displayed (or none), and doing a timed screen capture.
And of course there are other apps...
http://mac.appstorm.net/roundups/graphics-roundups/7-awesome-screen-capture-apps -made-for-the-mac/

How do I connect two video cameras to my computer have them both show up on the desktop at the same time so I can see and capture both images using a screen capture program?

Hello,
I am a teacher and want to make some videos to post online for my class. I would like to have it set up so that I have a powerpoint presentation going, a video camera pointing at a piece of paper I can write on and another video camera pointing at me. How do I do this? I have seen several solutions but they seem to be for switching between videos whereas I want both video images to be on at the same time.
Also, is there a screen capture program you would recommend?

Go to System Preferences - Sharing and change the computer name there. You can also, optionally, change the name of your hard drive to further clarify the origin of your backups. Click once on the "Macintosh HD" on your desktop, then click its name to allow you to edit it.
Matt

Since Firefox 6.0 copying images, by either Win 7 fxn or by screen capture fxn's, no longer works

-- At least, this is the way it seems... a letter I wrote first to the VMN Toobox staff (and to Firefox)...
Hi VMN Staff/Inventor – and Hi to my favorite browser’s staff at Firefox,
I must say that I really love your Screen Capture fxn for the VMN Toobox 4.25! I use it ALL of the time! Hopefully, I have sent you some money already. Tonight however something is really wrong! When I fired up the computer this afternoon and, as usual, was doing research for my office, some webpage logos wouldn't copy, so as usual I dropped down the VMN Toolbox selections, selected Screen Capture and arranged the capture bars over the image, got the yellow flash-across the selected area and pasted the picture in to the document. I looked and looked, reshot the image several times but unbelievably … THE SCREEN CAPTURE IMAGE on the document WAS BLANK!
This NEVER occurred before. And, even after restarting the computer it still did not work.
Then I happened to be in a document where VMN screen capture images had been added - they were ALL blank! Checking other documents - all screenshot images in all documents are blank, totally whited out, with the black lines of where the images used to be right there, emphasizing that something is gone. Like a painting stolen from a museum wall and the photon shadow is all that remains.
I had not used Awesome Screenshot for quite a while, but there it was up on my toolbar - tried that - same damn thing! What's going on? I am pretty certain I let Mozilla FireFox go ahead and update from v5.x to v6.0 as soon as I signed on, and several add-ons were suddenly "no longer compatible," but as far as I can tell your software doesn't rely on any plug-ins. The Awesome Screenshot extension add-on for Firefox was still enabled, yet it did not work.
Further troubleshooting - as I was at my desktop on the network in the office, I then fired up my laptop. This time I DID NOT allow Mozilla Firefox to update from v5.x to 6.0. The VMN toolbox screenshot worked fine! Uh, oh Firefox…?
So, I will be sending this message to Firefox also - I detest Microsoft, only use their software at all only because I HAVE to, I almost never use IE v8.x or 9.x or wherever it is now - but can your people at VMN (and y'all at Firefox) explain how the only browser I use, Firefox, could possibly reach in to my documents file and cause the screenshots downloaded to the clipboard, then to documents, to suddenly no longer be able to be seen? Is this even possible?
Lastly, maybe you know something about this - is there any way to actually "see" the clipboard - what's on it at any given time? I cannot find any way to access either file names or images existing on the clipboard no matter how much is on it, or what program I'm using. (An IT level/web developer person I am not, just a physician.)
I have Windows 7 Professional on my desktop, 4GB RAM, the network/server can only use a 32-bit system type, and everything is highly maintenanced by myself and our IT team, so absolutely everything else is fine. On my laptop I have a Windows 7 Home Premium OS installed and working fine on a brand new HP Pavilion g4 Notebook PC w/ 4GB RAM, 64-bit system type.
Any time to send me any ideas? Thanks. And you too, Firefox - what's going on?
Thank you very much,
Robert Schmidt, D.O.
Woodlands Healing Research Center 5724 Clymer Rd. Quakertown, PA 18951 [email protected] and [email protected] ph: 215-536-1890 fx: 215-529-9034 cell: 267-221-1818

-- At least, this is the way it seems... a letter I wrote first to the VMN Toobox staff (and to Firefox)...
Hi VMN Staff/Inventor – and Hi to my favorite browser’s staff at Firefox,
I must say that I really love your Screen Capture fxn for the VMN Toobox 4.25! I use it ALL of the time! Hopefully, I have sent you some money already. Tonight however something is really wrong! When I fired up the computer this afternoon and, as usual, was doing research for my office, some webpage logos wouldn't copy, so as usual I dropped down the VMN Toolbox selections, selected Screen Capture and arranged the capture bars over the image, got the yellow flash-across the selected area and pasted the picture in to the document. I looked and looked, reshot the image several times but unbelievably … THE SCREEN CAPTURE IMAGE on the document WAS BLANK!
This NEVER occurred before. And, even after restarting the computer it still did not work.
Then I happened to be in a document where VMN screen capture images had been added - they were ALL blank! Checking other documents - all screenshot images in all documents are blank, totally whited out, with the black lines of where the images used to be right there, emphasizing that something is gone. Like a painting stolen from a museum wall and the photon shadow is all that remains.
I had not used Awesome Screenshot for quite a while, but there it was up on my toolbar - tried that - same damn thing! What's going on? I am pretty certain I let Mozilla FireFox go ahead and update from v5.x to v6.0 as soon as I signed on, and several add-ons were suddenly "no longer compatible," but as far as I can tell your software doesn't rely on any plug-ins. The Awesome Screenshot extension add-on for Firefox was still enabled, yet it did not work.
Further troubleshooting - as I was at my desktop on the network in the office, I then fired up my laptop. This time I DID NOT allow Mozilla Firefox to update from v5.x to 6.0. The VMN toolbox screenshot worked fine! Uh, oh Firefox…?
So, I will be sending this message to Firefox also - I detest Microsoft, only use their software at all only because I HAVE to, I almost never use IE v8.x or 9.x or wherever it is now - but can your people at VMN (and y'all at Firefox) explain how the only browser I use, Firefox, could possibly reach in to my documents file and cause the screenshots downloaded to the clipboard, then to documents, to suddenly no longer be able to be seen? Is this even possible?
Lastly, maybe you know something about this - is there any way to actually "see" the clipboard - what's on it at any given time? I cannot find any way to access either file names or images existing on the clipboard no matter how much is on it, or what program I'm using. (An IT level/web developer person I am not, just a physician.)
I have Windows 7 Professional on my desktop, 4GB RAM, the network/server can only use a 32-bit system type, and everything is highly maintenanced by myself and our IT team, so absolutely everything else is fine. On my laptop I have a Windows 7 Home Premium OS installed and working fine on a brand new HP Pavilion g4 Notebook PC w/ 4GB RAM, 64-bit system type.
Any time to send me any ideas? Thanks. And you too, Firefox - what's going on?
Thank you very much,
Robert Schmidt, D.O.
Woodlands Healing Research Center 5724 Clymer Rd. Quakertown, PA 18951 [email protected] and [email protected] ph: 215-536-1890 fx: 215-529-9034 cell: 267-221-1818

Screen capture in java ?

i want to capture a Screen in java and save it as a video file now.
later i want to make like video streaming software for lan or wan.
means
any one can see what going on that pc where this Screen capture java software was installed.
so any help regarding this problem ?
i want to make a software like www.gotomeeting.com
Edited by: myharshdesigner on Dec 1, 2007 11:44 AM

So what have you done so far and where are you stuck?
See
{color:0000ff}http://catb.org/~esr/faqs/smart-questions.html
mindprod.com/jgloss/sscce.html
http://java.sun.com/docs/codeconv/html/CodeConvTOC.doc.html
http://www.codebeach.com/tutorials/screenshots-java.asp
https://aptframework.dev.java.net/gooey/screenCapture.html{color}
db

Screen Capture default format in Tiger OS

Dear Mac OS Fellows:
In Tiger OS, the default file format for screen capture is "PNG." I want to change it to "PDF"!
I found the command tips, never worked for me, on the net=>
defaults write com.apple.screencapture type pdf
killall -HUP SystemUIServer
I tried those 2 commands. The default format is stil set to "PNG."
Help please!
Max NY

Max--
The reason why I try to capture screens with "PDF"
export, is that I want to preserve the "vector"
attribute of the type.
To no avail! After saving capture as a PDF, I zoom in
400% to check on the edge of the type. Disappointing
enough! All become pixelated!
Hmm. This may not be possible. The way I understand it, the screen is a bitmap, rendered by the OS. So, yes you can get a PDF of the screen, but it's just a bitmap in a PDF. That would be the same for any kind of application's windows where the text was drawn on screen, like a dialog box.
The only standard tool I know of is the "Web Capture"
in Acrobat Pro. v.7.
Well, if you're interested in web pages, you can always just use "Print," but instead of printing, save your web page to a PDF from the print dialog. But, since you're "printing," you may find the printout isn't exactly like the web page. Especially if they use a different style sheet for print media.
You can use this same trick with other applications, too, as long as they can print (and as long as they don't "rasterize," i.e., make bitmaps of, the type in their documents before they send them to the printer).
I've never heard of a tool that could do what you want with any window. I think one would have to intercept the commands going to the graphics system before they actually get rendered for the screen, and I'm not sure that's possible.
charlie

Screen Captures Exposed

This thread attempts to tackle the issue of screen captures in FrameMaker.
Please post questions about screen captures to the FrameMaker forum outside the FAQ thread using Add Topic. http://www.adobeforums.com/cgi-bin/webx?14@@.ee6b312
Please, post corrections and suggestions to the FAQ Corrections and Suggestions thread:
DorothyK "FAQ Suggestions and Corrections" 5/9/01 7:12am.
Screen captures are a basic part of technical writing and even non-technical writers, who use FrameMaker to write about software, will more than likely end up using screen captures.
This thread attempts to clarify issues about screen captures. This thread concerns itself primarily with screen captures of software, not the screen capture of things like photographs.
Please post questions about screen captures to the FrameMaker forum outside the FAQ thread!http://www.adobeforums.com/cgi-bin/webx?14@@.ee6b312

Dov Isaacs on Screen Captures Dov Isaacs had this to write about screen captures: *************** Date: Wed, 23 May 2001 10:23:22 -0700 From: "Dov Isaacs" <[email protected]> Subject: Imported / Placed Images - MORE (You Asked for It!) All: Some additional issues were raised yesterday both on-list and in some private emails to me about me postings with regards to screen capture images specifically and images in general. Issue #1 - UNIX =============== UNIX is not my specialty and Adobe no longer provides a version of Photoshop for any flavour of UNIX. Thus, my advice for UNIX users of FrameMaker are effectively to capture the raw image as TIFF, process the image on Windows or Macintosh to obtain the EPS file with the image interpolation option, and then move the resultant EPS file back to your UNIX-based system for use with FrameMaker. Issue #2 - File Size - Screen Captures ====================================== There is no question that the binary EPS files that result from the procedures I outlined yesterday are somewhat bloated compared to other files holding the same content. The resultant PDF files at the end of the process, though, are exceptionally compact. To show what is going on, I captured an image showing one of the PSCRIPT driver dialog windows. I saved the resultant RGB image in a number of different formats. The following are the files, sizes, and explanations: Printer Properties.bmp - 899 KBytes RGB and K only, no CMYK option, no compression option, no display/print-time interpolation, limited cross-platform interoperability, application/driver resampling problems Printer Properties.gif - 20 KBytes RGB only, no CMYK option, 24 bit color reduced to 8 bit color, no display/print-time interpolation, application/driver resampling problems Printer Properties.tif - 61 KBytes no display/print-time interpolation, application/driver resampling problems Printer Properties Direct ASCII.eps - 2735 KBytes no compression, enormous size (includes TIFF preview) Printer Properties Direct Binary.eps - 1462 KBytes no compression, large size (includes TIFF preview) care must be taken in setting Windows PostScript printer driver to correct binary option (most often TBCP if not AppleTalk printer) Clearly, you are indeed paying an on-host penalty in file size by using the EPS approach that I outlined. The resultant PDF generated from this content most often is SMALLER than the PDF generated from TIFF equivalents and has higher quality, but you will pay in terms file size of the on-host "content" files with the images. (You may ask "why are the EPS files from Photoshop so bloated?" The answer is two-fold. Part of the problem comes from the fact that Photoshop does not have a compression option for non-JPEG EPS export, although it has a ZIP compression option for non-JPEG PDF export. The other part of the problem is the TIFF preview header, which surprising enough, takes at least as much space as the "base" uncompressed image in PostScript. Yucck!) But alas, I did find a way of fixing this problem enough to be quite a bit more tolerable. (If local disk space is not a problem, then you need not worry about trying this stuff out!) Instead of saving the image as EPS with the interpolation option in either Photoshop 6 or Photoshop Elements 1, save the image as Photoshop PDF with the interpolation option and ZIP compression (not JPEG!!) using either one of those programs. THEN, in Acrobat 5, save the PDF file as binary EPS, TIFF header, language level 3. (In Acrobat 4.05a, export the PDF file similarly!) Resultant files (both ASCII and binary flavours): Printer Properties.pdf - 23 KBytes Most compact format for this image type Not appropriate for FrameMaker import/placement. Printer Properties from Acro5 ASCII.eps - 400 KBytes Slightly larger than binary equivalent, much larger in the general case, though (includes TIFF preview) Printer Properties from Acro5 Binary.eps - 396 KBytes Slightly smaller than ASCII equivalent, much smaller in the general case, though (includes TIFF preview) care must be taken in setting Windows PostScript printer driver to correct binary option (most often TBCP if not AppleTalk printer) With the replacement step of generating PDF instead of EPS and then the extra steps of running Acrobat and saving/exporting PDF, you save over two thirds of the disk space for the EPS files. There is no quality loss in this process. The savings in disk space is due to the fact that unlike non-JPEG EPS export from Photoshop/Photoshop Elements, PDF export from the same program can ZIP compress images as well. Screen captures do exceptionally well with non-lossy ZIP compression. The EPS save/export from Acrobat maintains the images' ZIP compression. The remaining "bloat" in these Acrobat-generated EPS files is the result of Acrobat's PostScript procedures in the EPS file as well as the TIFF header. Bottom line is that I think the extra steps are worth it if you want to conserve disk space. If you want to re-edit THESE EPS files in Photoshop, unlike the EPS files directly saved from Photoshop, extreme care must be taken in opening them to avoid weird resampling. Issue #3 - Non-Screen Capture Images ==================================== I would still recommend EPS as a better means of importing/placing images into FrameMaker such that resampling does not occur in the application or driver. Likewise, I would not recommend ever resampling any such images to a higher resolution. Turn on the image interpolation option and let either Acrobat or the ultimate PostScript printing device do the hard lifting for you. You gain nothing by carrying around the extra data which really contains no real new data. This is most likely contrary to what your service bureaus and printers will tell you as gospel and what their pre-flight software will advise you to "correct," but resampling here buys nothing at all. (If they still don't believe you, have them contact me!) I have revised the recommendations from yesterday based on the above ... - Dov ======================================================================== Based on our experience at Adobe, there is one way that easily yields the highest quality computer screen shots for both display and printing. (1) Grab the image with whatever your favorite tool is. Under Windows, the easiest thing to do is Alt-PrintScrn which puts the RGB bits onto the pasteboard. On the Mac, Shift-Command-4 followed by CapsLock yields an image file. (2a) Under Windows with Photoshop 6, create a new document. It will automatically be the size of the image on the pasteboard. CTRL-V will then paste the screen capture into that new image. Then, flatten that image. (2b) Under MacOS with Photoshop 6, open the generated image file (a PICT file with a name of the form "Picture x" where "x" is an integer). (3) Convert the screen shot image to CMYK or grayscale to suit your needs. Not all service bureaus require CMYK! If you are displaying the PDF file and printing to laser printers, CMYK buys you nothing other than potentially a larger file. (4) Flatten the image. Layers buy you nothing here and may cause problems later in saving the file. (5) Do not resize or change resolution of the image!!!!!! (Why? Because you generally don't know at this time exactly what the magnifications and resolutions are that you will be viewing and printing with! In fact, zooming in and out with Acrobat or Acrobat Reader changes those requirements on the fly. Better to simply just have the captured data. Upsampling or downsampling at time of need to exact specifications yields much better results than multiple such transformations!) (6a) Re-editable by Photoshop, but "bloated" EPS file size option! Save the image using File=>Save As using the "Photoshop EPS" option. In the "EPS options" screen, you should use the TIFF (8bits/pixel) preview option (yields an EPS file that can be used both on Mac and Windows), Encoding "binary" (ASCII can be twice the size and JPEG is totally inappropriate for screen shots). Check "PostScript color management" if you are using color management in your workflow. The key though is that you MUST check "Image Interpolation". This sets a image dictionary key that Adobe PostScript Level 2, Adobe PostScript 3, Acrobat, and Acrobat Reader use to do very high quality image interpolation and/or downsampling appropriate to the device's actual resolution and technology at the time the image is viewed or printed. (Distiller passes this key along from PostScript or EPS in a PostScript stream into the equivalent PDF image key!) Close Photoshop 6. OR (6b) Compact EPS file size option! (i) Save the image using File=>Save As using the "Photoshop PDF" option. In the "PDF options" screen, you should use the ZIP encoding (lossless compression) option. The key though is that you MUST check "Image Interpolation". This sets a image dictionary key that Adobe PostScript Level 2, Adobe PostScript 3, Acrobat, and Acrobat Reader use to do very high quality image interpolation and/or downsampling appropriate to the device's actual resolution and technology at the time the image is viewed or printed. (Distiller passes this key along from PostScript or EPS in a PostScript stream into the equivalent PDF image key!) (ii) Close Photoshop 6. (iii) Open the resultant PDF file in Acrobat 5 or 4.05a. Save the PDF file as an EPS file using the export function in Acrobat 4.05a or the Save As function in Acrobat 5. Set the options for binary EPS, TIFF header, and language level 3. (iv) Close Acrobat. (7) Import the resultant EPS file into whatever application you have in which you wish to include the screen print. Obviously you will only see the EPS preview in those applications (except for InDesign), but your resultant printed output (via PostScript or PostScript=>PDF) or display via Acrobat / Acrobat Reader will be of exceptionally high quality. During distillation, do not downsample any of these images. Downsampling of the screen shots can be avoided by having a high enough threshold for downsampling; 300dpi or higher will do! Working on a budget? It turns out that you can replace Adobe Photoshop 6 with Adobe Photoshop Elements 1.0 if you do not need to convert to CMYK and don't need any other advanced image handling. This could save you $500 a copy if your image handling needs are more limited. NO, as far as I know, neither JASC nor Corel PhotoPaint nor any of the other budget image edit programs offer the EPS export image interpolation option, assuming they even offer the EPS format. Furthermore, none of the nifty screen capture utilities that we know of offer either EPS or EPS with the image interpolation option. We know of NO better means of producing high quality printed or displayed screen shots in an output device independent manner. Forget GIF, TIFF, BMP, and especially JPEG. Forgetting the issue of the image interpolation feature for the time being, use of any of these formats results in the "host" program (such as FrameMaker or Microsoft Word, etc.) doing their own resizing of the image in conjunction with the PostScript drivers based on the device resolution selected. The bottom line is that by the time Acrobat gets to display the image or the PostScript RIP gets the image data, the image data will have been upsampled, downsampled, resampled, i.e. overmangled! Also, note that for purposes of placing other images in FrameMaker or similar applications, EPS with the image interpolation also is the preferred means of image placement for exactly the same reasons. In terms of image resolution, you may choose to leave as-is and let the Distiller do the heavy lifting, if necessary or downsample in Photoshop if the original image is grossly over-endowed, so to speak. Remember, you cannot later reconstruct what you downsample now. With regards to the "resolution" that you set the Acrobat Distiller printer to, that resolution primarily affects non-EPS image handling. As long as you set the resolution to 600 dpi or greater, character and vector artwork placement will be fine and not affected. You don't need to use the resolution of the final device (in fact, don't go over 1200 dpi under Windows or you might hit a nasty bug in FrameMaker's interface with the driver). For distillation job options, always use "compress text and line art". This is non-lossy compression and you gain nothing by not using it other than a larger PDF file size. I know that this information is very much at odds with what your service bureaus, printers, or Kinkos will tell you, but it is authoritative and Adobe Systems Incorporated stands behind it completely when used in conjunction with Adobe Acrobat and RIPs with Adobe PostScript Level 2 or Adobe PostScript 3.

Screen Capture Blurry After Transcode

This is probably a dumb question because I am not usually the one working with video, but I really need help! I am doing a demonstration on my computer and I need to make it into a DVD. I used Windows Media Encoder 3 to capture my screen and then save it as a wmv. This file looks fine. I edited the video in Premier CS4 and it still looks fine. But when I try making the Premier file into a DVD using Encore, it makes the quality look horrible. Pictures become really pixelated, and text just becomes big blobs. I tried to transcode using the highest setting, but this did not help. Is there something else I can do? Thanks for any help!

First, the screen capture to WMV will heavily compress the footage. WMV is a streaming media, delivery-only format, and is not meant to be edited - strike one. Now, PrPro, while it will Import WMV, will have to basically convert it to DV-AVI to allow for Frame-level editing. DV-AVI conversion, even at an internal basis, does a little bit of compression. Though nothing like the quality hit just going to WMV, there is a tiny hit there is some - strike 2 (well, probably really strike 1.25...). Then, you need to get to MPEG-2 for the DVD. That is another heavily compressed format. When starting with a DV-AVI, it does a nice job. When you start with a WMV, to though the process of converting it back to I-frame footage to edit, and then compress the heck out of it again - strike 3. This does not make THAT much difference whether you do the MPEG-2 conversion (Transcoding) in Encore, or from PrPro. The key word is "much." You might want to experiment with using a standalone encoder to create your MPEG-2, rather than either Encore, or PrPro. Some are better. The ones used by Hollywood with 10-pass encoding run into the tens, if not hundreds, of thousands of dollars, and are run by experts, who do nothing else all day, 5 days per week. Besides going to a stand-alone encoder, you will need to bit-budget to find out how much material vs the bit-rate, will fit your disc.
The better workflow would be to NOT use WMV, but instead an I-frame format/CODEC in the first place. DV-AVI (though slightly compressed) would be an ideal choice. Then, the ultimate quality to MPEG-2 would be to Export from PrPro is something like the Lagarith Lossless CODEC, and use a stand-alone encoder and bit-budgeting to get the ultimate 100% DVD-compliant MPEG-2. That would be Imported into Encore, and if not detected automatically should be set to Do Not Transcode.
Hope that this explains where the quality is going, and provides a workflow that would cut the losses.
Hunt

How can I create a PNG or JPG screen capture or screenshot of the entire length of a long email message?

Hi all,
I need to create screenshots of emails, but I need to image the entire length of those emails. Can I using Mail or any other email application? Here is what I have tried so far ...
I can only do a screen capture of the portion of the email that shows up on my 27" Mac. I can reduce the size of the emails somewhat, but usually not enough to capture their entire length.
I tried going through Gmail using Firefox + Awesome Screenshots plugin, but couldn't get Gmail to open entire page so as to capture it. Normally I view this Gmail account using Apple Mail.
"Printing" to a PDF is not an acceptable solution for my needs, because that changes the native formatting to fit the print / pdf format. I need to show the exact email layout as thought it were an actual email.
Any ideas? Thaks for your help.
Marco
27" iMac
Mountain Lion OS X 10.8.5 (12F45)
3.4 GHz Intel Core i7
4 GB 1333 MHz DDR3
AMD Radeon HD 6970M 1024 MB

Installed ScreenGrab add-on to Firefox and, sorry, it still only captures the window to the extent that it is open, and there is no way that I know to open an email window in Gmail so as to show the netire lengthof a long email message.
So, ScreenGrab helped me get more screen capture of an email, but still not yet the entire email. I used Save>Complete Page/Frame, but still no more than what is visible.
I'll keep looking. And thanks for your suggestion Sabatica.

I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
Here is an image of the issue
http://www.flickr.com/photos/67839707@N08/8884847081/

I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

I just jazzed up my 2 Ghz iMac with 10.6.8, and 4 gigs of memory. I'm VERY happy with the results (fast!), but now I have a thin yellow line way over on the right side of the screen, which goes from top to bottom. This is really strange! Any input?

I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?

Hello Mark,
It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right. >>>>>>>> plus some of the links within each.
The problem is well explored with much guidance on what to do and where to go.

Changing file type format in Screen Capture (shift command 4)

You'd think this would be in a preference menu! But it's nowhere to be found in any apps preference or system preferences.... I've seen posts how to do it in Terminal... and people sell programs to do it.... but Tiger and Leopard have t built in.. sort of....
The default file format when using SCREEN CAPTURE (ShiftCommand4) was a .pdf ... but then it was changed to .png Some people can't read .png... so I wanted my captures to be in .jpg format.
You can change the file format type of your SCREEN CAPTURE to any of the following:
JPG, JPG-2000, TIFF, BMP, PDF, Photoshop, PICT, SGI, PBG, TGA
But first you have to have a file you want to change (say it is a png).
Open the file using Preview.
Once open, under File (in the menu bar) go down to SAVE AS.
There's you'll see FORMAT and a pull down menu. Choose which one you want...
Screen capture will now open your captured pictures in that format.
Crazy, huh?

The OP here was using a keyboard shortcut, not Grabber.
I did some further exploring. I just tried TinkerTool again, and again was able to change the file format of saved screencapture files to jpeg. TinkerTool modifies the com.apple.screencapture.plist file the same way that the Terminal command does.
This clearly works for command-shift-3 and command-shift-4, which save the screencapture image as a file. However, on looking more closely at the O.P.s initial post in this thread, he/she actually said
I use keyboard shortcut control/command/shift/4
When you include the control key in the command, the screencapture image gets saved to the clipboard instead of to a file, and you wouldn't normally be aware of its format until you pasted the clipboard contents somewhere else. I don't know where the OP was pasting it, but as was noted in the thread cited above by Baltwo, pasting a sceencapture image from the clipboard into a mail.app message results in a .tiff file being pasted. I also find this to be true in my system - perhaps this is what the OP was doing all along.
However this is an issue caused by the receiving app, not by the screencapture function. It's possible to look directly at the contents of the clipboard via:
Finder>Edit Menu>Show Clipboard
With my screenshot format set to jpeg by TinkerTool, I used control-command-shift-4 to save a screenshot to the clipboard. Looking directly at the clipboard in Finder as above, the clipboard image was a jpeg. When I then pasted the clipboard contents into a mail message and used Mail>File Menu>QuickLook Attachments, the pasted graphic in the mail message was a .tiff.

Please Help...why does my screen keep going to black in fcp?

I have just brought imac g5 (older version through private sale) and completed a beginners fcp course. When and got a lacie 250 , shot some stuff which I managed to capture! Then just tried to open project and now the screen keeps going to full black and I don,t know what to do! I would like to do a full system check and make sure all settings correct and to know why screen blacking out. I am very new to mac and don;t feel that at home with settings etc . Any advice would be very welcome and appreciated as I just want to practise now but I am stumped at the first hurdle!
ta
ali

New Discussions ResponsesThe new system for discussions asks that you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts. When you mark a post with the tag, it will also mark the thread as Answered. If you receive the solution or answer to your question outside of the thread, then, and only then, at the top of the thread, mark the thread as Answered. This will mark the thread as Answered without marking an individual post as .
If we use the forums properly they will work well...

I can insert images in gmail. However, I cannot insert a screen capture on one computer when I can on another. So I think its the way I have Firefox setup...but I don't know how to change it.

In gmail I enabled insert images. I can now copy/paste an image....but not a screen capture. I'm using the same process to capture the screen shot and paste as I do in Word. It works on one computer...but not another.

Move the cursor to the very top of the screen, maybe push up a bit. The main menubar should then appear. All the way to the right should be a bright blue icon - click it, and the Safari window should revert to 'normal' size.
Pressing Command-Control-F should accomplish the same thing.
Once it is back to normal size, click and hold on the top portion of the Safari window and drag to left or right to place it where you want it to be. Once you leave it there, the next time you open Safari it should open its window in normal size at that place.
If you need to re-size the window a bit, you can click-and-hold on the bottom-right corner of the window and drag to resize it.

SCREEN OCCASIONALLY GOES BLACK

Hi: I have a Mini Intel, 512MB Ram. I use Safari and MS Word. Today, after having the Mini for about 9 months, the screen occasionally goes black, and stays that way for about 5-10 seconds. It occurs every so often, like about once every 10 minutes. I have repaired permissions, ran Yasu, checked the settings on Energy Saver, where I have the computer on all the time; the display is scheduled to go to sleep when the computer is not being used for 17 minutes; these are locked. I haven't had this problem before. I'd appreciate it if you could give me some suggestions as to what might be wrong and how to fix it. Thanks, Jerry.

Thanks so much for your replies. I haven't changed the monitor from its original settings; made sure the cables are in firmly; I use cables for all my peripherals. I checked the Console and I may have had a Kernel Panic (I don't know, but it said something about Kernels when the screen went black). Moving the mouse didn't hurry up its return to normal. So, I again ran Yasu. I've been on the computer now for about 20 minutes and so far it's been working fine. I'm very grateful for your quick replies and for your advice. Hopefully, it's fixed now. Best wishes, Jerry.

Screen Capture goes where?

Similar Messages

Maybe you are looking for