Screen capturing & volume issues

I, like everyone, have been waiting for the nexus. I haven't gotten it yet because I wanted to see what people were saying.
I am especially concerned about the volume, some peole have said its not so good. I wear hearing aids in both ears and I am worried the nexus won't be loud enough. I'm still using the droid x with the volume set on obnoxious (by most peoples standards), but it works for me.
I was also wondering if this version (ICS) is able to do screen captures. Does anyone know?
Please and thank you.

DieAnne wrote:
I, like everyone, have been waiting for the nexus. I haven't gotten it yet because I wanted to see what people were saying.
I am especially concerned about the volume, some peole have said its not so good. I wear hearing aids in both ears and I am worried the nexus won't be loud enough. I'm still using the droid x with the volume set on obnoxious (by most peoples standards), but it works for me.
I was also wondering if this version (ICS) is able to do screen captures. Does anyone know?
Please and thank you.
Screen Captures - It does and real easy. Just press the volume down and the power button at the same time for about 2 seconds...... instant screenshots.
I think the volume is fine. I have a little high end hearing loss. I think it is a little less than my Droid X, but not too much. You might want to head to a Verizon Store to see a display model and try out the volume to see if it meets your needs

Similar Messages

Blue screen and volume issue

Need some help here. (hope Im in the right place)
Im getting the blue screen and spinning wheel at shutdown, computer wont turn off.
I run Techtool Deluxe and my Volume Structure fails (passes surface scan).
Disk Utility says volume is fine......
Im sure an erase and install would do the trick but I would really like to know more about what the issue is, how it happened, and how to avoid it in the future. As well as if its fixable without a clean install.
Just getting into the tech side of life so any direction on troubleshooting this issue would be much appreciated.
Thanks you

Hello jackhandy234,
I have a white iPhone 5 running on the latest IOS 7.0.4 and I am having a similar problem. I have had my phone for about 6 months now and have had it always well protected in a sturdy case similar to an otter box case. I have had no problems with the phone until 2 nights ago.
While on the messaging app "kik" My phone froze up, vertical pixalated lines appeared,it faded into a black screen, shut down and automatically turned on again. It repeated this "glitch" while powering back up about 3 times. Finally after having to manually restart it by pressing the power and home button for 5-6 seconds it stop.
After going back to using my phone, not 5 mins past, and it was "glitching" up again. In the past 48 hours it has glitch over 26+ times. Everytime I need to use my phone for more then 5 mins I need to manually reset it.
If you have found a solution to your problem, please post it because it could possibly solve mine.

I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
Here is an image of the issue
http://www.flickr.com/photos/67839707@N08/8884847081/

I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

Issues recording audio during a screen capture demo

I'm working on a computer with a Windows 7 OS and Captivate 5. I have "stereo mix" enabled as default recording device.(Realtek high definition audio).My task at hand involves demonstrating a video captioning tool, so I need to be recording the video's audio as I step through the process of creating the captions in a web based environment. I must admit that what I am trying to accomplish works easily with other screen capture tools (even free tools) but I would really like to be able use Captivate 5 for this project and others upcoming that require the same functionality. As a last resort, I've also tried adjusting the audio settings within the project (selecting the "narration" option as shown) but I'm not having any luck getting the results I need. I'm really hoping that it's something simple I'm just missing, and that forum experts can nudge me in the right direction... Thanks very much for your input.

OK, I understand now.
But with Captivate, the bad news is that just playing a video file on the screen, and capturing what you see with Captivate will not result in the audio from the video file being captured at the same time.
Captivate records audio via the microphone channel in your computer. What you can do as a possible workaround is turn on your PC audio and place a USB microphone near your speaker to pick up the audio from the video.
Another trick I have sometimes used is to purchase a cable with two male 1/4 inch jacks on each end, then plug one end into the microphone port and the other end into the headphones port on your computer. Be careful to turn the sound down low on your volume control and do some tests to find the appropriate setting where it will record the sound at a good audible volume.
Hope this helps.

Screen Capture issue in 10.5.7

After updating for 10.5.6 to 10.5.7 I noticed that my system locked up for about 10 seconds every time I would take a screen shot capture... Is anyone else having this issue?

im on an 8-Core and my screen capture
has completely disappeared...
aaaand to top it off my upper right window
functions are all gone as well...
i cant get anything Bluetooth to work
i had to go buy a wired keyboard to login my computer

Screen Capture Issue

In the past when I wanted to take a screen capture I would push Shift-Command-3. Then I would email it to someone by opening Mail and then attaching the screen capture and it would mail along a HUGE actual sized picture of the the sceen caputre. Now, when I do it just a small preview picture is sent and it is so tiny the person I am sending it to cannot make any details out whatsoever.
This seems to have been something that was changed in 10.5.3. How do I select to send the actual screen capture sized picture to whom it may concern?

Go to System Preferences>Keyboard & Mouse>Keyboard Shortcuts and make sure you have the correct key sequence for what you want.
Also go to Help and do a search on "Screen Shot" and see what you can find as far as information.

Yosemite mail screen capture issue

In new Mail if you try to insert a screen capture, using a right mouse click and selecting something on the screen, the selection is captured and inserted in the new mail as an image, but once you send the email the image disappear and the receiver does not receive any image...
thanks

Go to System Preferences>Keyboard & Mouse>Keyboard Shortcuts and make sure you have the correct key sequence for what you want.
Also go to Help and do a search on "Screen Shot" and see what you can find as far as information.

How to Get Proper Video Screen Captures (Screencasts) of Lightroom or Photoshop in Win?

Hello. I would like to get proper screen captures of Lightroom on Win 7/64, showing all screen elements as you see them. I tried FastStone Capture 8 and SnagIt 11.1, but they have various differing issues. Do you have a good hint?
In my screen capture, i want a mouse-click-sound each and every time the mouse is clicked. This is not "system audio", because the computer doesn't play a sound for every ordinary click. The capture software must add that sound. (I'm aware i can add the sound manually in post production, but want it recorded together with video.)
Experience with Faststone Capture 8's video captures:
I get well usable footage
Does optionally record mouse-click-sound for each click, with adjustable volume
Does not properly record some elements of Photoshop or Lightroom screens:
- cursors sometimes look rough or double-sized
- Lightrooms "TAT (Target Correction Tool)" disappears while being dragged on the image
- the color selector box of Lightroom's Adjustment Brush is not shown, while the cursor working within that color selector box is shown
- Lightroom's three-second-splash-message after Undo etc. is not shown
(All these missing elements do show up in *still* captures with Faststone Capture. They also *do* show up in video captures done with SnagIt.)
Experience with Snagit 11.1's video captures:
Does properly capture all those elements that FastStone does *not* capture (listed above)
Does *not* optionally include a mouse-click-sound for each and every mouse click (they record "system audio", but a sound on every click is not "system audio")
Videos are less smooth, cursor sometimes "jumping"
Now do you know a screen capture software for Win 7 that can
properly record *anything* that's seen within Lightroom and Photoshop
and automatically add a mouse-click-sound for each and every click i do
and produce smooth footage without "jumping cursors"?
Thanks for your real-life experiences!

Hi, thanks for your suggestions. Now i also tried:
Camstudio:
- mouse click sounds very weird (my mistake?), does NOT record LR overlays like adjustment brush's colour selector
Screen-cast-o-matic, optionally online, free:
- DOES record overlays like adjustment brush's colour selector. Mouse-click-sound not in free version. "System audio" is promised in paid version, but that does not necessarily mean a sound for each mouse-click. Contacted support for more
Straightforward using, lots of short video tutorials (useful for absolute beginners).
Free downloaded program 1.4 only works on primary monitor, the online launched app also records on secondary monitor
Don't see option to record a "window", only set resolutions
More "jumpy" than Faststone
More interesting pro-version seems to be rent-only-licenced, at 15 USD per year, not a one-time-buy
Camtasia:
DOES record overlays like adjustment brush's colour selector
.camrec format isn't offered for recording, only .trec and .avi (on Win 7)
Exported MP4 looks blurry and has colour blotches, that are not visible in the initial recording, only after exporting; this doesn't change at all after setting very high quality MP4 options; i guess i didn't look properly

How to Get Proper Video Screen Captures (Screencasts) of Photoshop and Lightroom in Win?

Hello. I would like to get proper screen captures of Lightroom and Photoshop on Win 7/64, showing all screen elements as you see them. I tried FastStone Capture 8 and SnagIt 11.1, but they have various differing issues. Do you have a good hint?
What's more: In my screen capture, i also want a mouse-click-sound each and every time the mouse is clicked. This is not "system audio", because the computer doesn't play a sound for every ordinary click. The capture software must add that sound. (I'm aware i can add the sound manually in post production, but want it recorded together with video.)
Experience with Faststone Capture 8's video captures:
I get well usable footage
Does optionally record mouse-click-sound for each click, with adjustable volume
Does not properly record some elements of Photoshop or Lightroom screens:
- cursors sometimes look rough or double-sized
- Lightrooms "TAT (Target Correction Tool)" disappears while being dragged on the image
- the color selector box of Lightroom's Adjustment Brush is not shown, while the cursor working within that color selector box is shown
- Lightroom's three-second-splash-message after Undo etc. is not shown
(All these missing elements do show up in *still* captures with Faststone Capture. They also *do* show up in video captures done with SnagIt, see below)
Experience with Snagit 11.1's video captures:
Does properly capture all those elements that FastStone does *not* capture (listed above)
Does *not* optionally include a mouse-click-sound for each and every mouse click (they record "system audio", but a sound on every click is not "system audio", so a regular click on a menu item has no sound)
Videos are less smooth, cursor sometimes "jumping"
Now, do you know a screen capture software for Win 7 that can
properly record *anything* that's seen within Lightroom and Photoshop
and automatically add a mouse-click-sound for each and every click i do
and produce smooth footage without "jumping cursors"?
Thanks for your real-life experiences!

Myles, thanks again, here are my findings with Camtasia:
Camtasia:
DOES record overlays like adjustment brush's colour selector
.camrec format isn't offered for recording, only .trec and .avi (on Win 7), but trec is usable just as .camrec i guess
Exported MP4 looks blurry and has colour blotches, that are not visible in the initial recording, only after exporting; this doesn't change at all after setting very high quality MP4 options; i guess i didn't look properly
i see how to add mouse-click sounds; i don't like the sound they provide so much; maybe it can be exchanged.
Other tests:
Camstudio:
mouse click sounds very weird (my mistake?)
does NOT record LR overlays like adjustment brush's colour selector
Screen-cast-o-matic, optionally online, free version:
DOES record overlays like adjustment brush's colour selector. Mouse-click-sound not in free version. "System audio" is promised in paid version, but that does not necessarily mean a sound for each mouse-click. Contacted support for more
Straightforward using, lots of short video tutorials (useful for absolute beginners).
Free downloaded program 1.4 only works on primary monitor, the online launched app also records on secondary monitor
Don't see option to record a "window", only set resolutions
More "jumpy" than Faststone
More interesting pro-version seems to be rent-only-licenced, at 15 USD per year, not a one-time-buy

How to Silence ICS Built-In Screen Capture?

I just learned from reading in a forum that ICS on the Bionic comes with the ability to screen capture, which is very useful for backing up my home screens in case of a FDR. To do this, press Volume Down and Power button at the same time and hold momentarily until a camera sound. The camera sound is loud, and regardless whether I have every volume setting to zero, it still makes the sound, and loudly. Is there a way to mute that? Or is it a safety/privacy issue forced by Verizon/Android/Motorola?
On another topic, when I installed the ICS update (after clearing system cache), I experienced slowness, apps timing out, and phone freezing. This was even after 4 days of allowing the ICS update to settle in. So, I ended up doing a FDR. Then, I couldn't install apps from Google Play. It would just show the Downloading progress bar, but no icon in the notification bar. So I FDR a couple of more times. Still no avail. Then I installed some backed up .apk files from my SD card and that worked. Also, I pushed an install from my PC to my phone. And after quite a while of starting and stopping the app install attempts, Google Play finally started to download. Not sure what the cause was, or if it was a waiting game, but all is well now.
Results: Speedy phone, battery lasting longer, and super fast boot up (for me, compared to Android 2.3 which took forever for my phone).
Was not happy at all at first, but now I am after biting the bullet and performing a FDR which I always dislike due to the hassle. Took me a good 3-4 hours to install all of my apps, in addition to the Google Play issues I had to work through.

I have discovered that the system volume of the phone is sometimes different from the phone and media volume that you can access in the phone's settings. Try downloading the sound manager that can access all of the volume settings. Once installed, see if you can control the system volume separately from the other volume levels and try the screenshot again.

Mavericks Screen Capture causes spinning beach ball

Trained by experience never to install a brand new operating system on top of a perfectly functioning one (unless I want to risk many wasting times and losing productivity), to test out the new Mac OS, I installed Mavericks on an external FireWire drive by upgrading a fresh install of Snow Leopard, updated to its maximum version. Nothing else was on the volume, for I had used Disk Utility to securely erase and content and overwrite the volume with zeros.
Immediately after the Mavericks, I looked at the System Profile, taking some screen captures of selected windows. While Mavericks successfully captured the screens, it failed to display them when I selected one and hit the space bar. Instead, mavericks presented a perpetually spinning beach ball that prevented me from doing anything else on the Mac. I was forced to shut down.
Upon restart back into Mavericks, I encountered the same problem. I had to force power off again.
After rebooting into Mountain Lion on my internal hard drive, I ran a complete series of hard drive maintenance utilities involving all the tools I have, including Disk Utility, Drive Genius, Disk Warrior, and Tech Tool Pro. All ran successfully and reported no problems. I then capped things by running iDefrag to eliminate file fragmentation and to optimize the volume. With several hours of labor invested in preparing the external hard disk, downloading Mavericks' installer, running the Mavericks installer, performing all the pertinent maintenance routines I could think of, and finally optimizing the volume, which has no other software on it besides the new Apple operating system, I restarted the Mavericks volume. I then took a fresh screen capture, selected it, pressed the space bar, and I still got that infernal spinning beach ball.
I let it run for at least half an hour as I returned to watching a football game, hoping things would finally get cleared up. They did not. The ball still spun. I could not even get to the Finder to peek into the Force Quit command under the Apple icon. So, as originally condemned, I was compelled to hold down the power button to regain control of my computer, which this new, appropriately named operating system had wrested from me.
Anyone having a similar problem? Anyone aware of a sure-fire solution, other than to avoid relying on this new operating system, which must be my policy until such glitches get fixed?
At least you know now why I consider it unwise to install a brand new OS atop of one that has served you well.

OK, it’s Wednesday now, late afternoon, following a long yesterday, spent exclusively on getting Mavericks installed, a day which continued well into night, approaching the sun rise, until I collapsed. No one can tell me that the Mavericks installation is without errors! Your mileage may differ, if you’re lucky. But if you had to go through what I just did, you’ll long for the days of System 7, when all you had to do was shove a half-dozen floppy disks into a floppy drive to get your Mac up and running without such angst.
SHORT ANSWER:
After many twists and turns that Apple should have foreseen and not inflicted upon customers, I finally managed to get Mavericks installed on my external Firewire hard drive.
I did follow your lead, Baltwo, that the nature of the problem might lay in corrupt preferences files on the primary Account, but, as I attempted a couple of days, I modified your suggestion that I cherry-pick which plist files might be good vs. which might be corrupt, by deleting the whole **** account. A couple of days ago, my intuition told me that doing that was the wiser way to proceed; today I felt compelled to do exactly that, because I had no other choice.
The reasons I had to do that is elaborated upon below.
LONGER EXPLANATION and DETAILS:
As I explained in the message I composed on Tuesday morning, I felt so insecure that I did not obtain a well-functioning operating system that I had decided to start the installation all over from scratch.
It took all day Monday to again use Disk Utility to securely erase the volume and prepare it for the new installation. When I tried to short-cut the process by doing a Quick Erase, the volume refused to accept the installation of Snow Leopard 10.6.3 from the DVD. On top of that, I again encountered difficulties in installing Snow Leopard from the DVD, because the installer just could not close the deal. The gauge runs up to the 99% mark, and it hangs there saying that it is “Moving items into place.” Sure, it is!
I’m a patient guy, so I let the installer do its thing for about four hours while I watched the World Series game. (Yeah, Red Sox!) But by the time the game was over, so was my patience. I had to Force Power Off the Mac and restart it.
Since I have no confidence in an operating system whose installer failed to do its job properly, I felt that I had to do more. Before I did that, though, I did a Google search to find out if my experience was unique. It is not! The forums are full of people who have complained about this very same hanging problem ever since the Snow Leopard DVD was released. Great, I thought. Now what do I do?
I decided to the Apple support site and download the 1.x GB combo updater to Snow Leopard 10.6.8 in the hopes that the upgrade process would cure whatever issues cropped up during the incomplete installation by the DVD. After downloading that combo disk image, installing 10.6.8, restarting the Mac under 10.6.8, and getting all the software updates applicable to that version, a few tests, supplemented by a running a whole barrage of maintenance utilizes to fix permissions, repair the disk, rebuilt the directory, seemed to indicate that I did finally achieve a solid installation of Snow Leopard 10.6.8 and all its trimming.
To save myself any future agony of having to go through this kind of winding road installation again, I used SuperDuper to create a disk image of the entire volume. That disk image is stored on another Firewire volume, ready to burned at some future date onto a BluRay disc for safe-keeping and backup.
With Snow Leopard safely installed on the volume and sporting one user Account, I was ready to use the Mavericks installer package that I had downloaded last Saturday, when I first began this process, to upgrade to Apple’s latest and greatest OS. Unfortunately, the installation process failed in the same way that the Snow Leopard installer failed. The installer just could not get over the hump of closing the deal. Once I got the installer started, I went to bed.
Four hours later, the installer still had not completed its job, again getting to the 99% mark, and just hanging there. Again, I had to Power Off the Mac. Upon restarting with the Option held down, I elected to start up using the built-in Recovery feature.
That seemed to work, but only sort of. I was able to get a Mavericks desktop, but the User account had absolutely no privileges to do a **** thing. It could not open its own Home folder to see what was in it. It could not complete the screen capture process, because I had no permission to save the picture anywhere, like on the Desktop.
In System Preferences, I tried to increase the size of the cursor, but that failed. In Finder preferences, I tried to make the hard drives show up on the desktop, but that failed, too. I ran permissions in Disk Utility; that did no good. Nothing worked! I could not even change anything related to my User account, because I had no permission to do so. Imagine that: my only account was an Administer account to which I had no access. I would not have thought such a thing could be possible.
I was caught in a loop, stranded on a Mobius Strip, walking on the wild side, surfing the waves of a brand new operating system corrupted by its own installation process.
Not a good thing at all.
Since the first installment had also resulted in a bizarre set of user accounts ending up with QuickLooks being declared the winner of a new account the system decided to create for me, I think it is reasonably safe to conclude that there is some kind of a bug, or flaw, in the Apple upgrade / installation procedure that needs some attention by Apple system engineers. None of this kind of stuff I have delineated at some length should be happening to anyone who owns a Mac.
And, Baltwo, even though I had kept uppermost in my mind your suggestion about creating a new account merely to ferret out which preference files might be corrupt and which might be OK, I decided that I did not want to take any chances at all with this extremely messed User account, which had worked fine in Snow Leopard, but had somehow got corrupted during the upgrade. So, as before, I decided to (1) create a brand new Administrator account; (2) log out from the useless User account in which I had no privileges whatsoever; (3) log in with the brand new Adminstrator; and (4) delete that useless User account entirely, completely, and forever.
At first, I was a little hesitant about deleting the first Administrator account that existed in my Users and Groups pane. I did not even know if such a thing could be done. So, I referred to my David Pogue reference books, and I did a Google search for “Delete Home User Mac” to see what others knew about this. Everyone described the standard way to delete an account; no one even mentioned any prohibition about deleting the original User account. So, I went ahead and deleted it, without encountering the slightest problem in doing so. I even followed up with before and after Terminal commands to see if that useless User account was truly gone, and it definitely went poof. Since I lacked permissions to create any documents at all within that former Home folder, getting rid of it was easy. I think that the System was just as glad to trash it as I was.
Hopefully, whatever corruption occurred during the Mavericks installation and upgrade process was restricted to the preference files associated with that messed-up, original Administrator account so that I can begin exploring Mavericks with a perfectly pristine operating system. Before I start tweaking it or adding stuff to it, my next step will be to use SuperDuper to create a disk image of the entire volume, so that, in the future, I will have a clean set of system of file to install on this external Firewire volume, or on any other internal hard drive I choose to install Mavericks later on. A Bluray disc will contain that disc image for safekeeping when it’s time to remove it from the destination volume where it gets created.
As to the tardiness of my reply, it is caused by the exorbitant amount of time—four days!—it took me to trek along this twisting, winding path of installing Mavericks, as well as a glitch in the mismatch of similarly looking User Names associated with similarly looking Apple ID accounts and similarly looking User Names associated with nearly identical Email Addresses that do not convert from one to the other, as, for example, mac.com does to me.com.
As I learned from Apple Staff who responded to my report that I was being locked out of the Apple Discussions community, there are four pieces of information that must match up for each Apple ID account, and my data had slipped out of sync. Now I know why, during Apple’s changeover in the formatting of the Apple Discussions section, I lost all those “points” I had accumulated in helping others, not that I track such things, and I could not find where my previous discussions were.
That’s also why I may be able to award anyone points for helping me in this thread, but I’m dialing in under the “other” Apple ID, not the one I used to create this topic. Close readers will observe the slight difference.
Thanks a lot, Baltwo. You get the credit for pointing me in the right direction.

Screen capture shutter sound missing

So this is a minor issue, but now I'm just curious as to how it disappeared and how to get it back. I actually didn't even know sound existed until I plugged my MacBook into a set of external speakers. When I screen captured I heard the shutter sound for the first time in a year of owning it.
However, unplugged, zero screen cap sound.
Any ideas?

You need to turn the volume up on the MacBook when external speakers aren't connected. Give it a try. I know what you mean. It's much louder with external speakers connected.
Should be an audio icon top right in your Desktop. Click there and push the slider to the top. If there isn't an audio icon available, go to System Preferences/Sound. Click the Output tab. Make sure;
"Show volume in menu bar" is selected.
Carolyn

Error Message When Importing Quicktime Screen Capture to FCE

As I said in the subject I'm having issues importing a Quicktime Screen Capture into Final Cut Express. I keep getting this message.
File Error: 1 file(s) recognized, 0 access denied, 1 unknown
I figure it has to be a quick fix for this simple problem. And it's probably just my first time.
Thanking you in advance
Neo
Message was edited by: Neo Dot Com

QuickTime Screen Recordings are H.264 video files. You need to convert this to +QuickTime Apple Intermediate Codec+ in order to use it in FCE. MPEG Streamclip (free) can do this for you.

Changing file type format in Screen Capture (shift command 4)

You'd think this would be in a preference menu! But it's nowhere to be found in any apps preference or system preferences.... I've seen posts how to do it in Terminal... and people sell programs to do it.... but Tiger and Leopard have t built in.. sort of....
The default file format when using SCREEN CAPTURE (ShiftCommand4) was a .pdf ... but then it was changed to .png Some people can't read .png... so I wanted my captures to be in .jpg format.
You can change the file format type of your SCREEN CAPTURE to any of the following:
JPG, JPG-2000, TIFF, BMP, PDF, Photoshop, PICT, SGI, PBG, TGA
But first you have to have a file you want to change (say it is a png).
Open the file using Preview.
Once open, under File (in the menu bar) go down to SAVE AS.
There's you'll see FORMAT and a pull down menu. Choose which one you want...
Screen capture will now open your captured pictures in that format.
Crazy, huh?

The OP here was using a keyboard shortcut, not Grabber.
I did some further exploring. I just tried TinkerTool again, and again was able to change the file format of saved screencapture files to jpeg. TinkerTool modifies the com.apple.screencapture.plist file the same way that the Terminal command does.
This clearly works for command-shift-3 and command-shift-4, which save the screencapture image as a file. However, on looking more closely at the O.P.s initial post in this thread, he/she actually said
I use keyboard shortcut control/command/shift/4
When you include the control key in the command, the screencapture image gets saved to the clipboard instead of to a file, and you wouldn't normally be aware of its format until you pasted the clipboard contents somewhere else. I don't know where the OP was pasting it, but as was noted in the thread cited above by Baltwo, pasting a sceencapture image from the clipboard into a mail.app message results in a .tiff file being pasted. I also find this to be true in my system - perhaps this is what the OP was doing all along.
However this is an issue caused by the receiving app, not by the screencapture function. It's possible to look directly at the contents of the clipboard via:
Finder>Edit Menu>Show Clipboard
With my screenshot format set to jpeg by TinkerTool, I used control-command-shift-4 to save a screenshot to the clipboard. Looking directly at the clipboard in Finder as above, the clipboard image was a jpeg. When I then pasted the clipboard contents into a mail message and used Mail>File Menu>QuickLook Attachments, the pasted graphic in the mail message was a .tiff.

Screen capturing & volume issues

Similar Messages

Maybe you are looking for