Screen causes umount.nfs error

I like to keep screen session instead of few opened terminal emulators, but opened nfs drive in screen causes umount.nfs "device is busy" error on shutdown. Is it possible to prevent this?
Thanks in advance

The problem is that I can unmount it even if there's application working on it. I use shutdown -h now Sorry, I guess I wasn't clear that I only want to unmount nfs on shutdown. No matter what uses nfs drive it's unmounted smoothly on shutdown unless it's used by screen.

Similar Messages

I have put Netflix on my Macbook Pro but Silverlight will not run. I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.

I have put Netflix on my Macbook Pro but Silverlight will not run.I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.I can use Netflix straming thru my Blueray on my TV but it will not run on my Pro. Thanks

Try running Safari in 32 bit mode. In get info box for Safari,
check open in 32 bit mode. There have been some oddities
on some systems that can cause some issues.
I had thought MS had fixed this, but may not have.

Cause is mentioned as : "The cause for this error is due to person name is not assigned to the FND_USER."

Cause is mentioned as : "The cause for this error is due to person name is not assigned to the FND_USER."
Do we need to attach the person name of employee whose reverse Global deployment we are doing or the person name of the person who is doing this transaction.
Thanks & Regards,
Kirti Mohan Sharma

You just need to attach the person to the FND User. System Administrator responsibility - Security - User screen.
After you have linked the person, you can check the table
Select * from FND_USER
Where user_name = '<user_name>';
Cheers,
Vignesh

Cause Code 97, Error Class 2

I have had my Droid Incredible 2 for a little over a month. Has worked perfectly fine until this morning. I can receive messages, but whenever I try to reply to them I get a screen that says "Message failed. Would you like to retry?" but every time I retry it still doesn't send. Then I hit cancel instead and view the details of the error. This is where it says "Cause code: 97, Error class: 2". This is very frustrating and is there any way to fix it?

Lets ensure your text messages are up and running, JulieDuffek. Have you cleared out your text messages threads? I would also suggest heading into Settings > Apps > Manage Apps > ALL > Messages > Clear Data.
YosefT_VZW
Follow us on Twitter @VZWSupport

NFS Errors on Solaris 2.6 and 7 Systems running as a clear case client

I read in a Rational Document that When Sun fixed defect #4271267 they introduced a problem that causes EAGAIN to be returned to fsync() andclose() system calls. The EAGAIN defect is being tracked by Sun as defect #4349744 and it is a problem for NFS clients running Solaris2.6, 7, and 8.
Sun has released a patch for this on Solaris 8(108727-06 or later). Does anyone know, What are the Patches(Patch ID Numbers)to be installed on Solaris 2.6 and Solaris 7 Systems for the Problem when ClearCase Views or Vobs are on NetAPP with Solaris servers.
I am getting NFS errors and I am not able to view the files, when I try accessing the Vobs from Solaris 2.6,7 systems. The Clear Case Server is on Solaris 8 and the VOBs are stored in Netapp Filer.
TIA
Regards
Saravanan.C.S

Hello:
I have the same problem with an only Adaptec AHA-2940, but it is bigger....i can't install Solaris with this problem.
I am sure that it isn't hardware problem becouse i have 3 IBM PC Servers 315 and i have the same problem with all them.
Some help would be very grateful.
Hello,
I have an intel box running Solaris 2.6 with Oracle
8.i.
There are 2 SCSI cards. The first one has the
following devices. [0 = Seagate 9.5gig drive] [4 =
Seagate tape drive] [6 = TEAC cdrom] [7 = adaptec 2940
SCSI card].
The Second has the following devices. [0 = Seagate
9.5gig drive] [1 = Seagate 9.5gig drive] [7 = Adaptec
2040 SCSI card].
Solaris is partitioned as followed. 1 root drive. 1
/opt drive. And 1 /backup drive.
My problem is periodically we get Transport errors.
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: abort
request, target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: abort device,
target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: reset target,
target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4 (adp1):
Dec 2 08:15:45 HAFC unix: timeout: early
timeout, target=1 lun=0
Dec 2 08:15:45 HAFC unix: WARNING:
/pci@0,0/pci9004,7861@4/cmdk@1,0 (Disk8):
Dec 2 08:15:45 HAFC unix: SCSI transport failed:
reason 'incomplete': retrying command
Like this. When they come it is by the thousands.
Sometimes locking up the system. Many times the errors
indicate a disk and give a block error or two. If I
replace the disk. The problem usually goes away.
Sometimes replacing the cable clears the problem.
Sometimes this happens when there is no real activity
on the server. I have applied patch 111031-01 witch
was supposed to fix this problem. But it hasnt. Unless
I have bad hardware. Is it possible?

Error was caused by operation ERROR in feature PINCH

Dear All,
We have created a new personnel area alongwith new personnel sub areas and assigned it with company code successfully. but when we performing hiring action it is giving error that "Error was caused by operation ERROR in feature PINCH".
Please assist me in resolving this issue.

Dear Majid Khan,
Can you share screen short of PINCH feature where we can better understand,
1. If you have properly maintained PINCH feature make sure that Administration Group name should be defaulted.
2. Check PINCH feature is in Active mode or ....?
Ur's
Mohan

Changing numeric control representation causes fatal internal error.

Has anyone seen this problem. In the attached program the control at the top of the front panel named "Part Number" is a U64 which was part of an earlier program. I wanted to change the representation of the control since I don't need a U64 so I tried to change it to a U8 or any other unsign number and get an fatal internal error which closes the program. The error screen is also attached. Is this a know issue? Is there a work around the problem? Just not sure why changing this control's representation would cause such a error? Please let know if this has been seen before.
Regards
Gary
Attachments:
Sockeye1P1.zip ‏210 KB
LV2010_ErrorScreen.JPG ‏96 KB

Hey Gary,
Sorry to hear that you're experiencing this error. This could be related to a known LabVIEW 2010 issue with case structure selectors having their representation changed. A Corrective Action Request for that particular issue has been filed for this so that it can be looked at for future versions. The workaround is to delete and re-add the case structure (just the one where the Part Number is the case selector, located in your "WaitStart" state). Basically, the case structure gets corrupted causing the crash.
I wasn't able to reproduce this on my machine, however I had to cull a lot of your code to run it here due to missing subVIs, etc. Let me know if deleting and re-adding the case structure fixes your issue and hopefully we can get to the bottom of this.
Courtney L.
Applications Engineer
National Instruments

[Solved] There is a yellow triangle at the bottom of the screen with the message "error while signing in"

Firefox Sync has been working fine between my home computer, work computer and my Android phone but suddenly my home computer has recently stopped syncing. There is a yellow triangle at the bottom of the screen with the message "error while signing in". I have checked passwords and codes on all three devices and check the sync versions are the same. All where correct. I have reinstalled both firefox and sync. I have even tried setting up a new sync account with a different user name but still the same problem. My work computer and phone sync fine but my home computer gets the error. Does anyone have any idea what could be causing this. Any help would be greatly appreciated as this is driving me mad!

I have now discovered that if I manually disconnect (Tools / Sync / Disconnect) and then sync it works but only once. I seem to be able to repeat this manual process indefinitely. I thought that this might give a better mind than mine a clue.

10.6.2 failed to install due to 'nfs error', audio no longer works

macbook pro, all other updates have installed just fine, except for 10.6.2
I get this in the log:
11/10/09 3:58:15 PM com.apple.kextcache410 Created mkext archive //System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext.
11/10/09 3:58:15 PM com.apple.kextcache403 Failed to mount helper partition: error 0XF8DA000C (DA err# 0x0c).
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 4)
11/10/09 3:58:15 PM com.apple.kextcache403 /: trouble updating one or more helper partitions.
11/10/09 3:58:15 PM com.apple.kextd10 async child pid 403 exited with status 70
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 5)
11/10/09 3:58:15 PM installd376 PackageKit: Install Failed: (null)
Error Domain=PKInstallErrorDomain Code=121 UserInfo=0x104d22740 "An error occurred while updating system extension information." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=70 "The operation couldn’t be completed. Stale NFS file handle") {
NSLocalizedDescription = "An error occurred while updating system extension information.";
NSUnderlyingError = "Error Domain=NSPOSIXErrorDomain Code=70 \"The operation couldn\U2019t be completed. Stale NFS file handle\"";
arguments = (
"-update-volume",
nothing is mounted (i rebooted before applying). not sure why it's giving that NFS error. it's consistent tho.. if i reboot and try the manual install of the patch, I get the same error.
after the failed patch "installed" it left my sound not working... so far everything else appears to work. any thoughts on fixing this are appreciated. i ran diskutil and 'fixed perms' and 'verified disk' ... patch still fails.

Try reinstalling the patch. If you get all the way through the installation, then see if your sound works. If not, then I suggest you do a repair install of Sno by installing Sno over Sno as in an upgrade install. Such an install, while usually very safe, still is an install so be appropriated backed up if you proceed.

RMMR1MRS-When run in background cause update failure errors looking

hi,
RMMR1MRS report when run in background cause update failure errors .
There are few below reason for the error log.
1. for the PO invoice already generated - (its right if already invoice generated. should not happen again)
2. In MIGO, entire quantity has been reversed and also invoice generated with zero value - ( its right , should not happen invoice again )
3. Particular PO line item deleted - (its right if the PO line item deleted. ERS settlement not require)
For the all above reason, the update error occurs. But the mean time the program "RMMR1MRS" should not through the update error log.
Note: The job was not terminated due to this update error and also no harm because of the error log
can you please help on this update failure why it occurs.

Have you found a solution already? If so, please, share it with the community and close this thread.

Files moving to NFS error folder - Could not insert message into duplicate check table

Hi Friends
Have anyone faced this error, could suggest me why.
The CSV Files failed on Sender Channel and moves to NFS error path and in the log it says as below.
Error: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not insert message into duplicate check table. Reason: com.ibm.db2.jcc.am.SqlTransactionRollbackException: DB2 SQL Error

Hi Uma - is that a duplicate file? have you enabled duplicate file check in sender channel?
please check if the below note is applicable
1979353 - Recurring TxRollbackException with MODE_STORE_ON_ERROR stage configuration

Issue while running a custom package:ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o

Hi Guys,
We have created a custom package where in we are trying to call the standard API's of Oracle projects i.e PA_PROJECT_PUB.When we are trying to call these APIs we are facing the below issue.
We have tried testing in two instances ,Initially it worked in both instances.
Using the same API's multiple times we tested the same data set in these instances.
For the first few runs it works fine.But when we go on using the same API's again and again for our testing we face now and then the below issue.
Standard API's
=========
add_task
update_project
change_structure_status
create_draft_plan
Error:
ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o2670336.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log. in Package PA_PROJECT_PUB Procedure update_project:ORA-0000: normal, successful completionError while publishing the task
Please let us know if anyone of has come across the same situation.
Regards,
Vijay

But have issue only with validating invoice batch. I followed metalink ID's 605542.1, 167990.1,261693.1,1088553.1,749491.1, 461271.1 and few more.Was this working before? If yes, any changes have been done recently?
Please see if these docs help.
APXAPRVL: Invoice Validation Errors With MSG-00001 and REP-1419 [ID 333305.1]
Invoice Validation Errors When Others:101505:Non-Oracle Exception Rep-1419 [ID 464125.1]
Invoice Validation Fails with REP-1419 Error in Ap_approval_matched_pkg.Execute_matched_checks [ID 293425.1]
Invoice Validation Failing On Fnd_file Could Not Write To File L0202306.Tmp [ID 461520.1]
Invoice Validation (APPRVL) Errors ORA-20001 APP-SQLAP-10000 PSA_FUNDS_CONTROL_PKG.glxfck [ID 463184.1]
Validate Invoice Error With ORA-20001: APP-SQLAP-10000: AP_FUNDS_CONTROL_PKG.Calc_QV [ID 432702.1]
Invoice Validation Program Is Erroring Out [ID 382844.1]
Error On Validation Of Invoices From Previous Periods [ID 412814.1]
Thanks,
Hussein

What is causing a disk error when saving psd files or writing to cache?

The problem only happens when running Photoshop CC (2104) and Bridge (actually these are the only two programs I really use my external drive for) during a save or write operation to an external hard drive. I can work for hours, with multiple files open, saving, creating, etc. without a problem and then suddenly I'll get a message from Photoshop saying, "Could not save .... because of a disk error." or from Bridge saying, ".. unable to write to cache..".
When I quit and try to troubleshoot the problem, I find that, for some reason, Mavericks has put system files on my external (non boot) drive or, for whatever reason, thinks there is a system file on it. Consequently, the drive cannot be ejected (Error message: "... one or more programs may be using it...") and I cannot repair it using Disk Utility (Error message: " ... live file system repair is not supported"). I also cannot write to it (Error message: "... unexpected disk error has occurred (error code: -50)"). The problem persists even after quitting all other programs, which wouldn't surprise me if Mavericks thinks there is a system file on it.
I have force ejected the drive a couple of times but became concerned that I might be compounding the problem. Now I just restart my computer and run Disk Utility Repair Disk. (Don't know which is worse.) Disk Utility either doesn't find a problem or, if it finds one, it repairs it. After that, Photoshop and Bridge work fine for a while.
System information:
MacBook Pro 13" 2.4GHz with 16GB RAM, 500 GB HD (recently upgraded)
Apple Cinema Display
Mavericks (up to date)
G-Technology G-Drive (Gen 5) 2TB HD connected via Firewire 800 (latest firmware)
Unconfirmed observation: I believe the first few times this problem occurred, Firefox was up an running. I made a point of quitting all programs except System Monitor when running Photoshop and Bridge and I can't remember having the problem again. The the last time the issue occurred, today, however, Safari was up and running.
Is this an OS problem, a hardware (disk drive, cable, etc.) problem, a software problem (PS, Bridge) or some combination? I have put this much detail in the post hoping someone can share some insight into the cause. I will be sending this report to Apple and G-Technology and I will report any resolution, if and, hopefully when, I find one.

The only thing that will cause a disk error is an actual error from the disk.
Photoshop is just telling you what that OS told it about the error.
It sounds like you need to boot off another disk and try to repair your disk.
Also, make sure you have a backup. And check the SMART status to see if it is failing and needs to be replaced.

Java 7 update 51 cause the following error: java.util.HashMap cannot be cast to java.awt.RenderingHints

Since I installed Java 7 update 51 accessing the EMC VNX Unisphere Console cause the following error: java.util.HashMap cannot be cast to java.awt.RenderingHints.
I rolled back to Apple Java 1.6 -005 now I am getting the following error: plug-in failure.
I think this is cused by the fact that the EMC console application has been written for java 7 and not java 6. Has anybody faced and solved the "java.util.HashMap cannot be cast to java.awt.RenderingHints." error ?

Hi Yaakov,
The error is thrown from the eclipselink.jar:2.5.1 which is a JPA provider .
Is the above jar bundled in the Oracle Product you are working upon or was this downloaded from external site ?
If the jar is bundled with the Oracle Product, go ahead a log a SR with Oracle Support with Toplink product group to drill down on the issue, as the issue is happening internally or thrown by the Eclipselink implementation and we've no control....
Hope it helps!!
Thanks,
Vijaya

HP Mini 210-4000 Blue Screen of Death PAGE_FAULT_IN_NONPAGED_AREA error

I've been up and down the Forums here with no specific luck, unfortunately, so I'm going to ask even if this has been queried and solved in another part of the site which I may have missed.
I am trying to sort out a friend's HP Mini Notebook, model HP Mini 210-4125sa. The machine started up well enough until a week ago, when it suddenly decided to blue screen.
The specific error message text displayed within the BSOD reads as follows:
PAGE_FAULT_IN_NONPAGED_AREA
TECHNICAL INFORMATION:
*** STOP: 0x00000050 (0x87E40000, 0x00000000, 0x92442B13, 0x00000000)
I can not boot past the Windows 7 loading screen - the load bar makes it two fifths up and that's it.
I had thought to try and recover the operating system, if at all possible, from what is apparently a recovery partition that is created on the HD ( i haven't worked with these machines before unfortunately), although i cannot figure how to get at this partition before the error hits.
Also, having attempted to download a piece of software from the HP USB Recovery Flash Disk Utility, i realise that it seems necessary to actually use this from the notebook itself, which is not possible.
Having started running the various onboard tests from the BIOS menu, the Hard Disk Test has just apparently failed (specifically the Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless).HP have not unfortunately been an awful lot of help as they wil only offer a one-off technician support call for forty quid, or to take the notebook away for repair, the cost of which is practically as much as the original cost of the hardware. I would of course prefer to try and sort this out myself but have hit a bit of a wall at the moment. Any suggestions would be fantastic, at this point.
This question was solved.
View Solution.

That hardware test for the hard disk is a dead giveaway of a failed item. A failed hard disk is a show stopper.
Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless) It is important information.
A corrupted NTFS volume (the hard disk) can also generate the " PAGE_FAULT_IN_NONPAGED_AREA error" stop message.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Screen causes umount.nfs error

Similar Messages

Maybe you are looking for