Screen clicking when opened

everytime i open my screen it seems to click im not sure what to do? any ideas?

no its coming from the back i think the screen is to close to the back of the macbook

Similar Messages

IPad mini keeps clicking when open and green bars highlight and keep moving around the screen

MY iPad mini when open keeps clicking and a green bar keeps moving around the screen highlighting things, how do I stop it?

Go to Settings > General > Accessibility > Switch Control and turn this OFF.

My brand new 5S screen clicks when I press it...

I bought my new 5S 16GB 4 days ago from an Apple Store in Vancouver, Canada, and today the screen started to click when i press it. It's very noisy and very flexibile when i press the screen. Does any one has this problem? What should I do, I'm away from Canada for a couple of months and i'm not sure there are any Apple Stores in East Europe... I can't belive i bought a 800 $ phone that does this, it feels so cheap.
Help please?!

Styna wrote:
Yes, all phones are protected from manufacture defect for 90 days from purchase date.
Where did you dream that up
All NEW APPLE iPhones come with a12 month limited warranty

External screen dims when opening different apps?

Hi All ----
Seems my external screen dims and rectifies when opening different apps - like some kind of brightness adjustment going on... it doesnt happen on the MBP, just on the external screen --- i've checked all possible settings on Ext. Displ. / re-booted / repaired perms... cant quite figure it out.
I dont think this is energy-saver related.
Many thnx for any help in adv. ---
cheers,
J.

The problem with that is, it's hard to put it back together without assuring that you're not pinching the cable again.
Instructions can be found here.
As he says, the cable can be found at Small Dog Electronics:
http://www.smalldog.com/product/43417
If you need replacement feet, they can be found at MicroDoc.
The specific link you need on PowerBook Tech's website can be found here.
If it looks like too much for you to handle, you may want to check out DT & T Computer Services. Perhaps in a metropolitan area like Austin you can check the Yellow Pages and find a technician willing to match the price.
At one point, DominionTech in Colchester, Vermont was offering the repair for $79.90, but I'm not sure if that price is still available.
Good luck.

IPhone 5C screen clicking when touched?:(

So I was excited about getting a new phone and I decided to stick with Apple and I got a yellow iPhone 5C. well I had it for a few months with the screen clicking and I thought it was no big deal then my screen popped off and I sent it into Apple repair and they sent me a replacement and now my replacement makes a clicking noise when I touch the screen in the top area, mainly the right side. Any suggestions, tips, etc..?

Hello Garrat11,
Thank you for using Apple Support Communities.
From what you describe it sounds like your iPhone may need to be evaluated. I would suggest taking a look at this page to explore your options.
iPhone Repair and Service - Apple Support
Regards,
Jeff D.

Previous image flashes on the screen occasionally when opening safari. Even after clearing history and cache.

Occasionally an image from a previous website appears briefly when opening safari. I'm afraid it might do it with a site that has private information and other individuals use this ipad. Is this a problem fixed in the updates to the iOS or something different entirely. The image flashes sometimes even after clearing history and cache.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Upgraded to 7.7, itunes screen black when open

I just upgraded my itunes account to 7.7, and now everytime i try to open it, the window is black and an error message pops up saying itunes has encountered and needs to close. If you click to see what the data report contains, this is at the begining. I don't know what that means.
Error Signature
AppName: itunes.exe AppVer: 7.7.1.11 ModName: quicktime.qts
ModVer: 7.50.61.0 Offset: 00bad369
I've tried uninstalling itunes and quicktime, and reinstalling them, but alas, it still won't work! Please Help ME!
Message was edited by: JillianVanD

I have same problem which started just today. Turned off Firewall and Antivirus when reinstalling itunes and quicktime. No luck. Suggestions?

The lower right corner of my screen clicks when I press on it.

I have an iPhone 5, and when ever I press on the bottom right corner of the screen, it makes a clicking noise. If I press hard, it will stop for a few minutes, but then starts again. Whats wrong?

Stop pressing on it

Screen Flashes when opening lid after locked - T410s w/discrete -- Video of problem inside

My computer is set to password lock (in Windows 7) when I close the lid, but remain powered on. When I open the lid of the computer, the screen flashes around 10 times before it gives me the login screen.
My bios is updated, my graphics are turned to 'high performance' ... always on - when plugged in with A/C adapter.
Anyone know what the problem might be?
http://tinypic.com/player.php?v=fky0qd&s=7
System specs:
i5-520M(2.4GHz), 8GB RAM (2x 10666 - 1333mhz sticks, downclocked), 250GB 5400rpm HD, 14.1in 1440x900 LCD, 512MB nVIDIA Quadro NVS 3100m, CDRW/DVDRW, Intel 802.11agn wireless, WWAN option, Bluetooth, 1Gb Ethernet, UltraNav, Secure Chip, FPR, Camera, 6c Li-Ion, Win7 Pro 64

@paradiddle,
If it is possible, could you try removing the password so when the system wakes up from sleep, see if the screen flashes.
Also when your display is "out" to the TV via HDMI, try pressing Fn + F7 and see if you are able to switch it back to laptop view without rebooting. You could also change this via Display Properties.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Only Load Tab Once Clicked When Opening Large Groups of Bookmarks

I have a bookmarks folder containing a few websites I like to visit regularly. When I want to open all of these websites at once I open the bookmark folder, scroll to the bottom of the folder and click "Open All in Tabs". This opens *and* loads all of the bookmarks contained in that folder simultaneously.
I'd like to change it so instead of the tabs opening *and* loading simultaneously, they open simultaneously but *wait* to be clicked before loading.
The desired behaviour can be demonstrated when you restart Firefox with a few tabs open, but only the current tab loads after restart, with the others waiting in the tab bar to be clicked before loading.
Any advice is appreciated.
Thanks!

Hi krissie,
Thanks for your detailed and informative response.
I played around with the tab groups feature you mentioned, and although it's not exactly what I'm after I do have a few other uses in mind.

Screen Jumping when opening Navigational Block

Hi all. I have created a template and having a problem with the generic navigational block. It shifts the screen down to put the block at the top of the screen. We have recently upgraded to BW 3.5 and I think I see the problem...just not sure what to do about it. When I expand the block the URL changes to have "anchor=SAPBWUForm27&rnd=ID847810278330&dummy=#SAPBWUForm27" at the end of it. If I get rid of the "#" in that string then execute the URL, it works ok (without jumping) but if I try to expand or collapse by clicking on the block then the "#" comes back...along with the problem.
Any ideas?
Thanks,
Jeff

Hi Jeff,
Did you solve the issue yourself?
I am facing the same problem...
Br
//Sam

Screen Flickers when opening and closing

Hello, just wondering if anyone can shed some light on this problem. I'm thinking I'll definitely have to get this fixed. When I open my powerbook, the screen will turn blue, and flicker with vertical bars all over the place. When I adjust the screen it does the same thing - it seems to only do it in certain spots though, but I can leave it in a dodgy position and it will stay like that - to make the problem go away I just have to move it a little bit.
Frustrating - my warranty has expired.
Will the whole screen need to be replaced? If so - does anyone know roughly how much that will cost?

Norris, have you tried calling the Apple Store phone number (1-800-692-7753)?
If that's not getting you anywhere, call Apple Support again, and this time ask for Apple Customer Relations. (I think you can also choose the Apple Customer Relations option in the automated phone system that the Apple Support number runs you through, but if not, simply ask for them.)
Good luck with everything.

Screen flashes when open new tab.

Hi there,
It is not an error or something, but rather an interface issue.
I'm using dark themes on Firefox, cause I work in front of the notebook for long hours and trying to maintain safe condition for my eyes.
So, the problem is, that every time I open a new tab, the page part of the browser flashes, and it's especially uncomfortable when it happens at night.
I've tried to change the background color of about:home and about:blank to grey color using Styles plugin for Firefox, but despite I succeed in changing the color, the flashes are still present.
P.S.: If you need additional info please do not hesitate to write to me, thanks.
Sorry for my English, hope you understand the problem,
Hope to hear from you soon
Eugene

You mean that you get a blank white tab before the page loads? I fixed that by putting a line of code into the browser.css file of a theme, at the beginning, and that changes the background colour to some other colour.
browser {background: blue;}
It works in a userChrome.css file as well. The code:
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* set default namespace to XUL */
browser {background: blue !important;}
That file has to be located in a chrome subdirectory in the Firefox profile.
* http://kb.mozillazine.org/UserChrome.css

3 day old iPhone 5s screen clicks when pushed in.. is this normal?

I've had this phone for 2 days after already going to the apple shop to get a replacement for a wobbly home button the phone makes a faint popping sound when pressed at the side.. as though the screen isnt on properly

bump

Laptop screen problem when opening

I use acpid to control my laptop lid behavior instead of systemd. I have it so "vbetool dpms off" gets executed when the lid is closed, and "vbetool dpms on" when the lid is opened. However, once in a while, I will open the lid and it appears that dpms failed to turn on. Closing and reopening the lid is able to set dpms back on.
My graphics card vendor is Intel. The acpi events have never failed to register, so I don't think it has to do with the acpi events not going through.
Any advice on how to determine what's causing this?
UPDATE: I got this behavior to occur while I was on a framebuffer, and this was the output:
[drm:intel_enable_transcoder] *ERROR* failed to enable transcoder 0
Where to look next?
Last edited by mellowmaroon (2012-10-26 15:22:46)

Sure thing, here it is:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#Controllers=
#ResetControllers=cpu
#InhibitDelayMaxSec=5
# Options:ignore,poweroff,reboot,halt,suspend,hibernate,kexec
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes

Screen clicking when opened

Similar Messages

Maybe you are looking for