Screen Configuration Missing

Hello All,
We have upgraded from CRM 4.0 to CRM 5.0.
As a result SAP have deleted CRM001 (Sold-to Party) and created CRM000 (Sold-to Party).
All the config. as part of the upgrade process seems to have been copied across except the screen configuration.
We have 13 roles with screen config. in CRM 4.0, when we upgrade to CRM 5.0 we have only 12 roles with screen configuration. The missing one is Sold-to Party.
Has anyone come across this before and know how to resolve it?
Regards
David

Thanks Paul.
I might be missing something with these notes.
With 873634 is seems to be saying that prior to 5.0 roles such as Sold-to Party, Payer etc were not stored in BUT100 therefore the program supplied with this note (which short dumps incidentally) is used to copy the roles to BUT100.
I have copied this prog. and modified it to copy our CRM001 roles to CRM000 so we still have our customers post upgrade but I am not sure this is what I should be doing becasue all our transactional data such a change docs will hold CRM001 in the database tables.
But the original issue is the screen configuration missing. Looking at these notes does not appear to resolve this.
914437 seems to be saying make changes in R/3.
Regards
David

Similar Messages

Dual screen configuration makes keyboard stop working on X

Hi. My computer is working just fine. And my video card has two outputs (Nvidia[GeForce 9600 GT] (rev a1)). I got a second monitor, and I was trying to configure Xorg to use the two of them in a dual screen configuration.
I tried creating the 10-monitors.conf file like described in https://wiki.archlinux.org/index.php/NV … e_monitors, and here is what happens. X does use the two monitors, and I can even see my mouse pointer moving from one to the other. But then my keyboard stops working, and so do the mouse keys, only moving the mouse around works.
I have the impression this is related to the missing InputDevices in the ServerLayout. Something in my configuration probably needs that still, if the ServerLayout gets explicitly configured. What should I do? Could this be related to HAL somehow? How do I turn off HAL without it trying to kill me?
Thanks.

I have been using nvidia's TwinView for a long time, currently with two different monitor sizes. There is no need to do anything with udev if you have your xorg.conf set up properly. Here's what mine looks like, though you will have to adapt it according to your hardware.
Section "ServerLayout"
Identifier "Dual Layout"
Screen "Screen0"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "on"
Option "AutoEnableDevices" "on"
Option "AllowEmptyInput" "on"
EndSection
Section "Monitor"
Identifier "Acer"
HorizSync 30-81
VertRefresh 56-76
EndSection
Section "Device"
Identifier "GeForce 210"
Driver "nvidia"
Option "NvAGP" "3"
Option "NoLogo" "1"
Option "RenderAccel" "true"
Option "AddARGBGLXVisuals" "true"
Option "TwinView" "true"
Option "SecondMonitorHorizSync" "24-70"
Option "SecondMonitorVertRefresh" "56-75"
Option "MetaModes" "1680x1050, 1600x900 @1600x900"
Option "TwinViewOrientation" "RightOf"
Option "WrappedFB" "true"
EndSection
Section "Extensions"
Option "Composite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "GeForce 210"
Monitor "Acer"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1680x1050" "1600x900"
ViewPort 0 0
EndSubsection
EndSection
It is best to let as much as possible be handled automatically, but getting two screens working properly requires a bit of tweaking.

Boot data configuration missing or with errors

I have a Satelllite L870-15W, and no way to turn the system on.
All it says is "Toshiba" (the welcome screen) and then (after having pressed f8 or f9):
file: efi/micorsoft/boot/bcd,
status 0x0000001;
the boot configuration data for your or is missing or contains errors.
I have only recovery partition at D: but cannot access it. What shall I do?

Satellite L870-15W (PSKFNE-00700CHU) <- Hungarian version
Spec here too.
boot data configuration missing or with errors
It probably means the BCD is missing or corrupt.
To repair this, you need to access the recovery environment. Microsoft says Windows 8 will eventually take you there if it fails to boot many times. You can also get there using a System Repair Disc or a Windows 8 installation DVD like this downloadable one. You need the 64-bit disc.
It's possble this will also work on your Toshiba machine. Restart the computer by pressing the power button and immediately start tapping the F12 key until the Boot Menu appears. Using the arrow keys, select <HDD Recovery>.
WinRE looks like this. Select Troubleshoot and then Advanced options.
Lots of things to try. See KB2622803 for boot sector problems. The article assumes Windows Vista/7. The same fixes look different in Windows 8, but are all available.
If Automatic Repair (Startup Repair in 8.1) and System Restore fail, use the bootrec tool at the command prompt. This applies to Windows 8 also.
   Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issu...
Don't give up until you have tried replacing the BCD itself as follows. (Sometimes the partition is not named "c" and you need to try another letter.)
   c:
   cd boot
   attrib bcd -s -h -r
   ren c:\boot\bcd bcd.old
   bootrec /RebuildBcd
-Jerry

Looking for oracle.siebel.configurator.screen.Configurator

I'm exploring an upgrade of Siebel 8.1.1.3 to 8.1.1.10. The software upgrade seemed to go without errors, and I believe I need to do an incremental repository merge. However, when I run the command to kick that off (/opt/siebel/config/config.sh -mode dbsrvr) I get an error saying "Could not find the main class: oracle.siebel.configurator.screen.Configurator. Program will exit."
I'm running Slackware Linux on my test box, I know unsupported, but 8.1.1.3 has worked fine so far. This server has all the Siebel components installed on it in /opt/siebel. I have sourced the siebenv.sh file beforehand. I have examined all the jar files in my siebel install directory and cannot find that class.
Can someone tell me what I am missing?
Thanks for any suggestions.

Hi ,
1. Have you sourced dbenv.sh before launching DB config wizard?
Before you run the Database Configuration Wizard, you must source either dbenv.csh (for C shell) or dbenv.sh (for Bourne or Korn shell).
2. Then run below command for Siebel Database Configuration Wizard:
install_path/config/config -mode dbsrvr
In this path, install_path is the installation path for the installed Siebel Enterprise Server software. for example:
/siebel/8.1.1.11.0/ses/config/config -mode dbsrvr
3. Another important point to include here is IRM implementation is different in Siebel 8.1.1.10 and Siebel 8.1.1.11.
In Siebel 8.1.1.11 you need to launch DB Config wizard to run IRM, refer MOS document 'Innovation Pack 2013: Siebel 8.1.1.11 and 8.2.2.4 Incremental Repository Merge (IRM) - FAQ and Troubleshooting (Doc ID 1623495.2)'.
BUT for Siebel 8.1.1.10 IRM is not run through DB config wizard.
Refer- - Siebel CRM 8.1.1.10 and 8.2.2.3 Incremental Repository Merge (IRM) - FAQ and troubleshooting (Doc ID 1549478.2)
Thanks,
Shilpi

EHS Personal Data Screen is Missing

Hi,
I have question regarding Occupational Health..when I go to Edit Medical Service tcode is "ehsambtaet"..Personal data screen is missing.So i am unable to see the Medical service assigned to a person.
Is there is any configuration is required for this?Is it in HR or EHS?
Give me ur mail ID so that I can sent you the screenshot.
Thanks
Sachin
[email protected]

Hi,
Sorry for the late reply..i can define the org structure..but still screen is missing and also I can open a medical service for the person through scheduling cockpit.but cant view it as the screen is missing...Plz give me the mail ID will send u the screenshot.Also if u have any SAP documentation on IHS or OH please send me..it will help me alot.
Thanks and Regards,
Sachin Borde

Oracle RDBMS Screen is missing.

Dear Experts,
Our Problem is, while Installing ERP6.0 it asks for Oracle Client instead of Oracle RDBMS.
That Oracle RDBMS Screen is missing.
So it doesn't create database and subsequent folder under /oracle/stage/102_64.
We have Downloaded the file RDBMS_SAP_64.zip and unzipped as well but of no use, as document said "SAPinst extracts the Oracle RDBMS software to the staging area". However in our case while running SapInst it ask for Oracle Client.
OS=HP-UX 11.31 PA-RISC
Database=Oracle 10.2
ERP6.0
Please help to resolve the Issue.
Warm Regards,
Ajit
+91 9818999536

Hello Ajit,
sorry i misunderstood you before.
> Then Sapinst automatically extracted the oracle RDBMS installation files to the folder /oracle/stage/102_64/database.From there we executed ./RUNINSTLLER and successfully installed.
Yes, that is true and also the way like it is described in the installation guide. Afaik you can set a flag in the SAPINST dialog, if you want to extract the files or not. Also the dialog for the RDBMS installation DVDs is just coming up by the database instance installation. Maybe you have select the wrong installation path in SAPINST?
> When it prompts for Database Installation we need to extract Oracle RDBMS to the folder /oracle/stage/102_64/ and Download the file RDBMS_SAP_64.zip attached to SAP Note 819830.am i right?
Yes, you can also do that stuff manually. You also need the zip file from sapnote #819830.
This is described in sapnote #972263 (Inst.NW 7.0(2004s)SR2/Business Suite 2005 SR2-UNIX/Oracle).
<D041703, 08/SEP/06>----
Updating SAP-Specific Files in the Oracle stage area
Use SAPinst extracts the Oracle RDBMS software to the staging area, usually /oracle/stage/102_64/database. The "SAP" folder located in /oracle/stage/102_64/database contains SAP-specific scripts as well as the response files. Before starting the Oracle software installation, you need to update this SAP folder so that the newest versions of the scripts or response files are used.
Procedure
      1. Rename the original "SAP" folder by performing one of the following:
mv /oracle/stage/102_64/database/SAP
      /oracle/stage/102_64/database/SAP_ORIG
mv /oracle/stage/102_64/database/Disk1/SAP
      /oracle/stage/102_64/database/Disk1/SAP_ORIG
      2. Download the file RDBMS_SAP_32.zip (for 32-bit platforms) or RDBMS_SAP_64.zip (for 64-bit platforms) attached to SAP Note 819830 and copy it to a temporary location such as /tmp
      3. Extract the zip file by performing one of the following:
cd /oracle/stage/102_64/database
      unzip /tmp/RDBMS_SAP.zip
cd /oracle/stage/102_64/database/Disk1
      unzip /tmp/RDBMS_SAP.zip
You should now see the directory "SAP" extracted with the updated
version of SAP-specific files.
Regards
Stefan

Start Screen Layout missing icon

One of the program I pinned to the Start Screen is missing. The program that's missing is the Opera browser. I created a custom start screen layout with all the programs I want in different namegroups. I put the AppsFolderLayout.bin file in the Default profile.
I am preparing a Windows 8.1 image. I do this so all users can have the same Start Screen layout. The first time I did this, it worked fine. I logged in as new users in the computers and I see all the programs I pinned to the Start Screen.
Right now, I'm doing the exact thing for a new Windows 8.1 image. I placed the AppsFolderLayout.bin file in the Default profile. I logged in as a new user and many. The Start Screen is empty, other than the Desktop and Computer tiles, since it's a new
Windows install, The programs that are pinned are not installed yet. When I install the programs, the tiles will populate to the Start Screen. All of them worked, except for the Opera browser. The Opera browser is not showing the Start Screen. I made sure
the program is pinned before I exported the layout. The program is installed for all user.
I checked the program is installed when I log in as different users. I
even deleted the user profiles that was installed on and logged in again, the icon is still not there.
Would a new version of the browser cause this issue? I even installed the version I had when I first had it working and it didn't work. Let me know what would cause this issue.

Hi,
Please use the command “get-startapps” in powershell.
We have tested. Every time we reinstall the Opera, the AppID will change.
The AppID is the identifier of app. If it changes automatically, the Operating System can’t customize Start screen by different AppID.
Please refer to the following article to customize Windows 8.1 start screen.
Customize Windows 8.1 Start Screens by Using Group Policy
http://technet.microsoft.com/en-us/library/dn467928.aspx
If you change the AppID in xml file to match the ID in the PC you want to customize Start screen. The Opera will show out.
Best Regard,

Variable screen is missing

Hi All,
We are facing a weird issue, that variable screen is missing while executing query in Bex, however we are able to get variable entry screen in RSRT and Web bex.
1. Variable type : Characteristic values
2. Processing type : User entry and entry is optional.
3. We have checked ready for user input
Please let us know is there any work around / missing any settings to resolve this issue.
Regards
Venki

Hello Venki,
If you are using Abap Web, and the SAP default template (you can check via RSCUSTV21 transaction), open the template
0ADHOC with Web Application Designer 3.x .
On Properties select 0ADHOC -> WebItem TAB:
> Check the box "Force Variable Screen Display"
However, If you are using BI Java Web, and the SAP default template (you can check via RSCUSTV27 transaction), open the template 0ANALYSIS_PATTERN with Web Application Designer 7.0.
On WEBTEMPLATE properties -> -> WebTemplate Paramenters TAB:
> Check the Box Display Variable Screen to ON.
This will solve the issue.
Best regards,
Edward

Screens are missing in the program

Hi,
We have development ct2 and quality QP1 and prosuction P01 systems . In development system the program
SPMKEA2 consists screens 0100
0110
0120
0150
0160
0200
0210
0220
0230
0240
0250
0600
0700
0710
0720
1001
1002
1003
1004
1005
1006
1007
1008
1009
but in quality and production 1005 screen is missing. When we process the transaction ke07 to maintain derivation rule D it is araising the error 1005 screen is missing.
Can any one please provide me the solution soon. How to send the screen 1005 from development system to quality and production system.
Appreciate for the quick responce.
Regards,
Koti Reddy

Hi,
I think this a serious problem and you need to take it up with a Basis consultant.
Tell me one thing... Has anybody been playing around this program or screen. If not i am not sure why this has happened since you are mentioning that it is a standard program..
There is also a possiblity that this screen might be a part of an enhancement and you have forgotten to check it.....
I think it is better if you check the Object directory entry of this screen and check who has created it. If someone from your company/team has created it that means even you will be allowed to make a change and transport the screen.
Please revert if any doubts arise
Regards,
Pramod
Edited by: Pramod Manjunath on Oct 15, 2008 12:36 PM

ISG Debug - IP configuration missing for radius proxy session initiation

Folks,
We are trying to configure the ISG as a Radius-Proxy for EAP Authentication. I have configured aaa server radius proxy, clients and aaa auth radius-proxy group as per the guide. I have my interface config as follows:
interface TenGigabitEthernet0/2/0.205
encapsulation dot1Q 205
ip vrf forwarding CS
ip address 10.20.0.1 255.255.224.0
ip helper-address global 172.X.X.X
no ip redirects
no ip proxy-arp
ip tcp adjust-mss 1420
service-policy type control DEFAULT_RULES
ip subscriber l2-connected
initiator dhcp
initiator radius-proxy
arp ignore local
When I try to connect a wifi client to an AP, I can see that the AP is forwarding the Access-Request to the ISG but the ISG does not forward it to the AAA. In the ISG debug I see the following message:
RADIUS: IP configuration missing for radius proxy session initiation
Can any one help to identify what is missing here pls?
Thank You in advance!

Kiran,
Did you follow this guide? It looks like the interface configuration is there but you didnt include the actual radius configuration does it follow the guide here -
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_radius_proxy.html#wp1055053
Thanks,
Tarik Admani

Error in screen configuration

Hi Friends,
I was working in 4.0 but currently working in 5.0. in 4.0 when i go to screen configuration (pathCAC-> SAP BP-> BP-> basic setting->screen configuration and screen configuration there I was used to change the TAB Pages or renaming of Tab Pages and deletio every thing. But when I m working in CRM 5.0 i m not able to do that Changing of TAB Pages. When I go to this field it is giving error below:
This Version of the Visual Configuration Tool is Not the Current Version
Message no. R1901
Diagnosis
The installed version of the Visual Configuration Tool is an old current version.
System Response
Information
Procedure
A new version of the VCT is available for Release 4.6C Service Pack 01.
The new version is available when you install a new GUI.
See SAP Note 96885 (Getting a Frontend Patch from SAPSERVx).
Can any body will tell me how can I do this screen configuration (Customizatin of TAB PAGE)
Complete answer will be rewarded full points
Thanx
Chinmaya

Hi Chinmaya,
Its a known problem. Follow the instructions in SAP Note 409700.
This should solve the problem.
Regards,
Sudheer.
Reward points for Helpful answers!!

Where is the association between applications and Spaces screen configured in Mountain Lion?

Where is the assocation between Applications and Spaces screen configured in Mountain Lion?
In 10.6, I had FileMaker come up in Space 2, and it still does in 10.8 but I don't know how to change it.
Anyone know?

Right-click the icon in Dock and select Options

Claim Search Customizing - Selection Screen Is Missing (FS-CM)

Where customize this one in SPRO? Transaction ICL_EXPERT_1
"For Search 0001_ICLEXPERT (Search Appl. ICL), the Definition of the Selection Screen Is Missing in Table TIGN221"

Note 915108

When on Facebook (for example), Firefox is not allowing me to open pictures; when using apps, the bottom of the screen is missing so cannot utilize the apps. All working on Safari; just downloaded new Firefox 4, so seems to be a problem with this version?

Question
When on Facebook (for example), Firefox is not allowing me to open pictures; when using apps, the bottom of the screen is missing so cannot utilize the apps. All working on Safari; just downloaded new Firefox 4, so seems to be a proble

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
See also "Help About".
*Tap the Alt key or press F10 to show the Menu bar.
In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
*There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
*If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
*You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox

[SOLVED] xrandr -o right "Failed to change screen configuration"

After upgrade to 2.6.28 from testing and the associated nvidia driver:
[rulatir@berbelek rulatir]$ xrandr --verbose -o right
SZ: Pixels Physical Refresh
*0 1280 x 1024 ( 382mm x 305mm ) *50 53
1 1024 x 768 ( 382mm x 305mm ) 51 59 60
2 800 x 600 ( 382mm x 305mm ) 52 69 70 71 72 73
3 1280 x 960 ( 382mm x 305mm ) 54
4 1152 x 864 ( 382mm x 305mm ) 55 56 57 58
5 960 x 600 ( 382mm x 305mm ) 61
6 960 x 540 ( 382mm x 305mm ) 62
7 896 x 672 ( 382mm x 305mm ) 63
8 840 x 525 ( 382mm x 305mm ) 64 65 66 67
9 832 x 624 ( 382mm x 305mm ) 68
10 800 x 512 ( 382mm x 305mm ) 74
11 720 x 450 ( 382mm x 305mm ) 75
12 700 x 525 ( 382mm x 305mm ) 76 77 78
13 680 x 384 ( 382mm x 305mm ) 79 80
14 640 x 512 ( 382mm x 305mm ) 81 82
15 640 x 480 ( 382mm x 305mm ) 83 84 85 86
16 576 x 432 ( 382mm x 305mm ) 87 88 89 90
17 512 x 384 ( 382mm x 305mm ) 91 92 93
18 416 x 312 ( 382mm x 305mm ) 94
19 400 x 300 ( 382mm x 305mm ) 95 96 97 98
20 320 x 240 ( 382mm x 305mm ) 99 100 101
Current rotation - normal
Current reflection - none
Rotations possible - normal left inverted right
Reflections possible - none
Setting size to 0, rotation to right
Setting reflection on neither axis
Failed to change the screen configuration!
No effect.
RandRRotation enabled. Nothing suspicious in logs. Changing resolution and refresh rate with xrandr works, only rotation fails.
My xorg.conf:
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
# Disable "GLX"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
EndSection
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
Option "AllowDeactivateGrabs"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "pl"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
# Identifier and driver
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
Option "Buttons" "11"
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
#Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# Identifier "DELL P991"
# DisplaySize 365 275
# HorizSync 30.0 - 107.0
# VertRefresh 48.0 - 120.0
#EndSection
Section "Monitor"
Identifier "HP L1955"
VendorName "HP"
ModelName "HP L1955"
DisplaySize 376 301
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 76.0
EndSection
#Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
# Identifier "Standard VGA"
# Driver "vga"
# VendorName "Unknown"
# BoardName "Unknown"
#EndSection
Section "Device"
# Insert Clocks lines here if appropriate
Identifier "Galaxy GeForce 8600 GT"
Driver "nvidia"
Option "BackingStore" "true"
Option "Coolbits" "1"
Option "RandRRotation" "true"
Option "NoDDC" "true"
Option "UseEdidDpi" "false"
Option "DPI" "85 x 85"
#VideoRam 262144
EndSection
Section "Screen"
Identifier "Screen0"
Device "Galaxy GeForce 8600 GT"
Monitor "HP L1955"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1280x1024_75 +0+0; 1024x768 +0+0; 800x600 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Any ideas?
Last edited by Rulatir (2009-01-11 10:55:46)

Restarting the X server once didn't help, but restarting it again did. Now xrandr -o works. I will mark solved if the problem doesn't resurface within a few days.
edit: The problem went away and never occured again. Marking as solved.
Last edited by Rulatir (2009-01-11 10:56:58)

Screen Configuration Missing

Similar Messages

Maybe you are looking for