Screen contrast darker from 10.4.11 update

I just did this update and I notice my screen contrast is much darker most notable in photos. What up with that? Can it be adjusted out

I just wanted to say thanks for this advice. I also experienced a really bad change in contrast when I updated and I've spent ages fiddling with the gamma and colour settings over the last couple of days. I think this has solved the problem!

Similar Messages

Blackberry Playbook Overheated but works fine, screen is dark from edges about 1 inch and the rest is a light color

Hi,
I woke up this morning and tried picking up my playbook but it was very hot and also still charging, then I took it off of charge and I let it cool down. The playbook turns on and functions fine, but the screen is dark from around the edges (about 1 inch) and then light from the inner side. Also I never took my playbook into the sun or any other hot place and I think my factory blackberry playbook charger might be at fault. I didn't get any notification or any other type of hint from my playbook that it was hot or overheated. My playbook was turned off when it was charging and my bedroom was cool because of my A/C and ceiling fan. I don't understand how this happened and how can I make the screen go back to normal, It has been about 1 hour now and nothing has changed about the screen.
Solved!
Go to Solution.

My Playbook is fine now, the screen is normal again and the charger was at fault, but charge your BB playbook when itis turned on because my playbook was off and overheated and this was overnight. Also I resolved the screen problem by leaving it in a cool room in my home, and the LCD (Liquid Crystal Display) crystals were probably just very hot and they had to cool down also the battery life is still the same . But the BB playbook is fine and works fast, also I still have all my files and every function work perfectly. I wrote this from the BB playbook.

Computer screen goes dark (stops)after latest update.

After my latest update,computer crashes,screen goes dark,using wireless mouse;difficult to restart.
Is it 6.3 or the mouse?

First, Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions.
No need to report Permissions errors....we all get them.
Then, download the 10.6.3 Combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
You can install it right over what you already have.
DALE

The top of my iPod touch screen is darker than the rest of my screen after the newest update?

So today I turned on my iPod touch (5th generation) and it said there was a software update available. I updated it with no problem, but after the update I noticed almost half of my screen was darker than the rest at the top. (Posting screenshots below) I don't know if it's supposed to be like that because of the update or not. Also, I have a little blue dot (assuming it's a 'dead' or 'stuck' pixel) on my screen that was there when I bought the ipod BRAND NEW on February 13th of this year and I'd like to know if that may be affecting it? Any help would be appreciated!
The darker top screen:
Using apps and Safari the screen is normal:

Hi iBridgetx3,
You can try several things:
1. Go to Settings>Wallpapers & Brightness, and turn the Brightness up or down
2. Go to Settings>General>Accessibility>Increase Contrast, and play with the three options available there - I turned off Reduce Transparency, and turned on Darken Colors and Reduce White Point, because I like the color gradation on the wallpaper on my Home screen. But if you don't like it, then make sure Darken Colors is off, and try that with Reduce White Point both off and on to see what you like best
There are a lot of new settings specifically designed to address the variety of problems that people were having with the initial iOS 7 "look". Play around with them. You will probably find a combination that will suit you.
Cheers,
GB

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

700P Sprint Update 1.10 - Screen goes dark after sync

I updated my Sprint 700P yesterday to V1.10 Palm software. All seemed to go well with the update, until I tried to restore my data with a HotSync.
The sync seems to go normally, but at the end, it says a "reset is necessary"...after the reset, the screen goes dark right after the Palm logo appears. The phone seems to be still working.....just no visible screen.
I spent hours on this yesterday....now have no working phone.....very frustrated.
Warren C.
Post relates to: Treo 700p (Sprint)

Yes
i just replaced my 700p due to this issue and return home to find that nothing has been resolved.
It turns out that the update is rather seriously flawed. There is no way to revert the update so, Verizon (after checking with Palm) replaced my Treo and suggested that I not run the update again.
Now the sync issue that you describe.
There appears to be files associated with your treo on the Palm software on your desktop that are set for installation. This was due to the update i believe. These files: specifically those associated with AudibleAir.pdb are creating havoc during the sync.
The Work-around that Palm suggested to me which appears to work (on the new phone with the original ROM) is as follows:
1) Hard Reset the Treo
2) Re-sync the treo
!> When it asks you to choose the correct id, DO NOT DO SO!!!
3) Create a new ID for the treo and continue the sync.
This way these bad files are no longer set for installation because you are not using the same account as when you ran the update utility.
I would be interested to know if this works with a Treo 700p with the new ROMs installed.
My method requires the old ROMS and Palm in its infinite wisdom has not created any means of rolling back to the old ones. Thus a catastrophic update.

TS3694 Trying to update iPhone 5 to latest OS. Now the screen is dark except for the iTunes icon and an icon showing the charger cable pointing to the icon. Bricked out at that point.

Tried to update iPhone 5 to latest OS. When I looked at the phone a while later, the screen was dark except for the iTunes icon in the middle of the screen and another icon showing the charger cable and an arrow point to the iTunes icon. Now I'm bricked out of the phone. When I hold down the power button after the screen goes completely dark, the Apple logo appears, then the iTunes icon I described.

Hi Aphthonius,
Thanks for visiting Apple Support Communities.
If you only see the "connect to iTunes" screen on your iPhone, this means that the device is in recovery mode and needs to be restored. The information and steps in this article can help further:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
All the best,
Jeremy

HT201210 After latest update my iPad (no camera) screen went dark (dim) & blank. Once voice said setup incomplete. Tried reset does nothing. Home screen/wifi setup appeared for moment. Hear swipe see nothing!HELP

After latest update my iPad (no camera) screen went dark (dim) & blank. At first I could not power off. At some point voice said setup incomplete. In every language. Took someones advise turned off voice over in itunes.. that stopped the voices. itunes identifies and syncs but ipad screen remains blank (dimly lit). Home screen appeared for moment couple of times as well as wifi setup but disappeared as soon as i started to enter info. Hear swipe see nothing! HELP!

adetoye50 wrote:
Dear Contacts Journal Support Team,
FYI, this is a user to user support forum. You are NOT addressing Apple here.
Honestly, I doubt anyone is really going to take the time to read the novel you have written.

Screen goes dark after latest update

Screen goes dark, but you can still make out widgets faintly in background

If you can make out the screen enough, go to Settings > Brightness and turn it up. If you can't see or it is turned up, try resetting:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

Screen goes dark on resume from suspend

I have some problems with my video driver and suspend to ram. When I try to resume after suspend, my screen goes blank (dark). I tried restarting X, but nothing seems to happen. (The computer does still work when the screen is dark, i can ssh into it.)
The computer has an ATI radeon 9600 mobile graphics card, and it's using the open source "radeon" driver.
Im pretty shure this is a graphics driver iusse, because suspend works somewhat with the catalyst driver. (With catalyst suspend works once then crashes when i try to suspend a second time).
I have read the wiki entry for ATI-cards but it doesn't say anything about using suspend with the "radeon"-driver.
My xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "record"
Load "dbe"
Load "dri"
Load "drm"
Load "xtrap"
Load "extmod"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Dell"
ModelName "12.1 laptop"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
BusID "PCI:1:0:0"
Option "XAANoOffscreenPixmaps" "true"
Option "AGPmode" "4"
Option "ColorTiling" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Any help would be greatly appreciated.

I find the following very useful:
http://people.freedesktop.org/~hughsien … debug.html
If you are using pm-suspend, answer the survey and try the quirks proposed there.

Lenovo T400 screen goes dark issue, some video driver problem

Lenovo:
Motherboard:
CPU Type: Mobile DualCore Intel Core 2 Duo P8600, 2400 MHz (9 x 267)
Motherboard Chipset: Intel Cantiga GM45
System Memory: 1992 MB (DDR3 SDRAM)
BIOS Type: Phoenix (08/19/08)
Display:
Video Adapter: Mobile Intel(R) 4 Series Express Chipset Family
Video Adapter: Mobile Intel(R) 4 Series Express Chipset Family
3D Accelerator: ATI Mobility Radeon HD 3470
Problem/Issue:
Driver problem appeard after upgrading from XP to Windows 7.
From the Device Manager I saw that ATI Mobility Radeon HD 3470 was not working properly and
a) I did the "update driver software." After restart the screen light was darker than usual. (This was usual if I was working from battery but I was plugged in this time. )
As I'm not the best with computers I thought my drivers might be in conflict and to prevent serious damages, I just
b) disabled ATI Mobility Radeon HD 3470 from device manager.
This actually resolved the dark screen problem.
c) then I went to Lenovo support site: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-72858
downloaded newest drivers for ATI Mobility Radeon HD 3400 (Switchable Graphics Driver)
and Intel 4500MHD (Intel GM45 Express Chip)
For some reason while installine the: Intel GM45 Display Driver (version 8.15.10.2302) gives me error:
"This Computer Does not meet the minimum requirements for installing the software"
Also some problem appeard when installing the new downloaded version:
ThinkPad Switchable Graphics Driver (version 8.792.5-110424b-119200C)
d) so I went back to device manager and made an update to ATI Mobility Radeon from there.
Well, I got it working, but the screen went dark again. When I disable the driver it goes back to normal
brightness and when I enable it again, it stays normal.
I'll try to restart and see what happens

We had the excat same issue.
I could get the picuture back pressing the power button until it went to sleep and then wake it up again.
After the I went to device manager to delete all display drivers both Intel and ATI and then reboot.
doing the reboot windows found some drivers it could use.
I then installed the switchable driver from lenovo.
Now windows device manger report two display drivers:
1)
ATI Mobility Radeon HD 3400 Series, Version 8.792.5.2000, Driver manufacturer ATI Technologies Inc
2)
Mobile Intel(R) 4 Series Express Chipset Family, Version, Version 8.792.5.2000, Driver manufacturer ATI Technologies Inc
So it seams the switchable ATI driver take over the Intel card and the Intel driver is not needed.
At least the problem is solved for us.
Regards Anders

Curve screen goes dark while navigating

While using Verizon Navigator, Curve 8330 screen goes dark unless I continue to hit the rollerball every few seconds. The security option allows for a 2-minute window but, at times, I will need hours of screen light. How do I correct this?

dl54
I'm sorry to hear you're having some problems with your device and the new software. Software updates are designed to enhance features and function overall, we don't want this to take away from it. Not to worry, we can help fix this. All you have to do is go to Settings>Display>Screen timeout>change to desired setting.
AdaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

T500 loses screen when ejected from docking station

At my desk, I use a docking station with external monitor (DVI attach). If I eject from the docking station, my laptop screen goes dark. The only way I can make it work is to power down, eject, and reboot. It works fine then.
I have the ATI graphics card, and I don't think the switchable graphics is working. Is it possible to use the onboard Intel graphics when on battery power? This seems to be ideal.
Any advice will be appreciated.
Solved!
Go to Solution.

Thanks for the suggestion.
I apologize for not including the model number. I wrote my question several times, only to lose it before posting. This BB works very differently from the one I use a lot.
The machine is a 2081-CTO with 4GB ram, DVD drive, and Vista as shipped from Lenovo. Vista is up to date.
Earlier, I ran the Lenovo system update, and it installed seven fixes, including a new BIOS. The fixes were all listed as optional. Once I installed these fixes, I am unable to eject and get my display working. However, the screen flashes a few times and my icons were rearranged. I have reset my icons several times in the last few days, and find this to be very disconcerting.
The laptop spends a great deal of time connected to the docking station, which has the attached DVI monitor. I do take it to client locations, so the working laptop display is essential. I have been experimenting with connection to a 40 inch HD TV, and when we changed the resolution on the video port (VGA) (to read it from across the room), it messed my laptop display and DVI display's resolution. I had to reset all my icons for that as well. All my icons stay on the laptop screen.

IPhone 3GS screen goes dark...no apparent fix for it

My iPhone 3GS has started having a problem where the screen goes dark. The phone is still active and if you have the right light and strain real hard you can barely see the icons. I have tried everything I know to fix this but nothing works. One thing that did work for about a day was a Reset All Settings, from the General Settings menu. Previous to doing that, I have tried: 1) turn it on and off, 2)hard reset, 3)restore from iTunes. None of these worked for more than a few minutes. I did restore firwmare from the computer but I have not tried putting the iPhone into DFU mode...is there a difference?
Any ideas appreciated.

All iPhones require a SIM for updating/activating.
The SIM does not need to be active, simply insert a SIM card and activate the device. Borrow a SIM from a friend if necessary.

Screen goes dark while typing password.

Since recent Samsung upgrade, screen goes dark so quickly that it's difficult to get the password entered in time to unlock phone. Any ideas?

dl54
I'm sorry to hear you're having some problems with your device and the new software. Software updates are designed to enhance features and function overall, we don't want this to take away from it. Not to worry, we can help fix this. All you have to do is go to Settings>Display>Screen timeout>change to desired setting.
AdaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Screen contrast darker from 10.4.11 update

Similar Messages

Maybe you are looking for