Screen Control for Maintenace Order

Dear Sir,
Can You Tell Me SPRO Path For Field Referance for Maintenace Order ?
I am Going to change Screen Referance For the Maintenance  order Type wise.
for ex- For Order type PM10- There is no necessary of investment tab page
But For PM70 Project order- There is need of investment Tab Page.
For PM90  Accidentental order- I want only two screen Header & Operation ,
Sir, How can I do This ?what is Procedure for this?
Please Suggest me.............
Regards
Nitin

Hi,
First define view profile name which you will be assigning to order types lateron.Then select this view profile row and go to tabs in navigation area to left  and after double click you will get  a screen for maintaining tabs.There with new entry at top you need to maintain tab no,their names or title and then select subscreens S1 to S4 and A1 to A4 with required ones thr drop downs.
Also you can assign tabs through navigation by push buttons at top.
Note that u can assign max 8 subscreens to each tab.
Once you finish all this then assign view profile to order type for which you want to change views.
regds,
atul

Similar Messages

  • Screen Layout for Purchase Orders

    Hello,
    Using the screen layout settings in config, I want to set a particular field to display only in change mode in ME22N.
    But enjoy PO's are all controlled by entry ME21N only in config, So this means if I set AKTV (change) to display in ME21N transaction the field is display also, something I don't want to happen.
    Using ME22 etc it is no issue.
    Any thoughts on how to set change mode for enjoy PO's?
    Thanks.

    screen layout for purchase orders are done for document type wise.
    go to document type and check the field selecton. now you can change field selection for that document type
    spro > mm > purchasing > purchase order > define screen layout for document type.
    find the fileld selection key at  purchase order > difine document type

  • Screen variants for particular orders

    Hi,
    I have a querry.
    My client wants to make the material and quantity fields uneditable in CO01 and CO02 T-codes.  For this we have created a screen variant. But the practical problem is we are having Rewqoek Order types also. For this Rework Orders the material and quantity fields should be editable.
    So is it possible to tackle this problem by screen variants?
    Is it possible to call screen variant only for a set of order types?
    Regards
    Amit Parkhi

    Hi Parkhi,
    You can create a different screen variant for Rework Order type & then use to solve this issue.
    Please confirm.
    Regards
    R. Senthil Mareeswaran.

  • Add ifnotype field to an Infotype Screen Control for Infotype 0006

    How do I add an infotype field to an Infotype Screen Control for Infotype 0006. We need to add an additional Field for mobile phones. I have lloked in screen control (V_T588M) with no joy.
    Edited by: Henry Manana on Sep 1, 2010 12:11 PM
    Edited by: Henry Manana on Sep 1, 2010 12:12 PM

    You may copy your current screen into a new screen (e.g. 2099) for MP000600 and add the 2 fields into the element list as well as the screen layout of screen 2099. Then set an appropriate Modification Group 3 to these 2 fields in T588M detail screen for screen 2099. Configure feature P0006 and table T588M to set screen 2099 for molga 16.

  • Budget Availability Control for Maintenance Order

    Hi,
    Can anybody tell me that how to activate Budget Availability Control for Maintenance Order ? For Internal orders, it is already activated but for Maintenance Order (Category 30, type PM01), it is not activated.
    Please tell the procedure for activation for the same.
    Thanks in advance,
    Regards
    Satadal

    Thanks.
    But I have added Budget profile from Plant Maintenance -> Order type settings.
    So, I can assign only maintenance related Investment program  and positions in my Maintenance Order.
    But as availability control is not activated, System is not stopping me to issue Goods against that Order even if there is no Budget.
    I need to have that control for Maintenance Order that we should be able to issue material against that order only if there is a budget.
    That's why I want to activate this control but don't know how to do it.
    Can you tell me how I can do the same - depending on order type or individually?
    Thanks and Regards
    Satadal

  • Overdelivery tolerance Screen selection for Purchasing order

    Hi all,
    Currently we have a scenario over here, where we need to change the over delivery tolerance for purchasing order.
    Overview:
    We have received plastic packing screw ( PO 3480000011 , PO qty 98,000 pcs ) in 3 GR's
    1st GR.   21,000 pcs
    2nd GR. 29,000 pcs
    3rd GR.  50,000 pcs
    total   = 100,000 pcs
    ===================
    For 1st & 2nd del. we have input into SAP, but for the last del. we can't input because qty over 2,000 pcs than PO
    Because of this, we have reversed the 1st and 2nd GR, but we still cant enable the over/under delivery tolerance field selection.
    Other than that i have make the changes thru the
    OLME -> purchasing order -> Define screen layout at document level -> select Me22 and click on details ->GR/IR Control -> overdelivery tolerance with "X" at Reqd. entry.
    But this doesnt seem to work.
    have anyone encounter this issue kindly provide me some hint on this.
    Point will be rewarded for useful answer.
    Thank you.
    Kah Fei

    Hi,
    I think Under/Over delivery tolerance are a part of 'purchasing value key' of the purchasing view in the material master record.
    Try changing that for your material so that you get a overdelivery tolerance of more than 2% in the material master record.
    Otherwise in your PO , under the delivery tab in the item details mark the chkbox 'unlimited' overdelivery and check out....
    Revert back for further help...
    Regards,
    Prithviraj
    Edited by: Prithviraj Talekar on Jan 19, 2009 10:49 AM

  • Screen Control in Sales Order

    Dear All,
    I want to control the update pricing button in the condition tab screen of the sales order.
    I want to control for the same to be given to only specific users.
    Can anybody help me with the detailed steps for doing the same.
    Awaiting an early reply.
    Regards
    Ansh

    If the user id is different, then your basis people can do this
    On the other hand, if multiple users from different places accessing the same user id and you want to control, then you can try with sale order user exit USEREXIT_MOVE_FIELD_TO_VBAP or USEREXIT_CHECK_VBAP in MV45AFZZ where you need to define some logic
    thanks
    G. Lakshmipathi

  • Message control for Internal Orders

    Hi
    How to change the message control for an error when Iu2019m getting settling internal orders (message # KD503)
    Tks

    Hi
    You need to maintain Condition record for your Purchase Order output. Then output will get assign automatically once you create PO.
    Use Transaction code: MN04
    Navigation:
    Logistics --> Materials Management --> Purchasing  --> Master Data  --> Messages --> Purchase Order  -->  Create
    Enter PO output type and maintain necessary conditions.
    hope it helps.
    regards
    Srinivas

  • Budget control for Internal Order

    Hi
    Can any one tell me the setting for budget for internal order to avoid excess processing for procurement ?

    You have to configure your GL accounts.
    While creating GL a/c you will have to maintain Field status group as R017   Expense Accounts -Internal Order related in Control of doc creation in co code subscreen in tab Create/bank/interest.
    Hope this will help.
    Enjoy SAP,
    Parag Mahajan

  • Outbound message control for sales order SISCSO.

    Hi...
    I am trying to generate IDoc for Sales order using message control. The IDoc of type SISCSO is getting generated as per the requirement.
    I want to calculate certain things before generating IDocs. I have done the following configurations:
    1. A function module 'ZIDOC_OUTPUT_SALES_ORD' is created with interface same as 'IDOC_OUTPUT_ORDRSP'. (Where i am planning to write a code)
    2. WE57 where Function module is assigned to SISCSO as outbound FM.
    No BD51 is done as it is only for inbound process.
    3. New process code ZSO is created through WE41, which is made message independent and FM created in step 1 is assigned to it.
    4. In WE20 , this process code is attached to V1 type of application under message control.
    Still, my FM is not getting called... I have checked it by applying Break point as well as raising exception in the FM. But still it's not working..
    Where am i going wrong??
    Can anybody suggest solution??
    Thanks,
    Audy.

    Hi,
    You need to use FM : MASTER_IDOC_DISTRIBUTE to create outbound idoc.fill the data in the tables EDIDC,EDIDD and generate the IDOC.
    check this link:
    Re: Master_IDoc_Distribute
    and use transaction : WEDI for IDOC configurations.
    here you will have all the transactions(step by step) to set the outbound IDOC configurations.
    Regards
    Appana

  • Screen variant for sales order screen

    Hi,
    I have a problem in using screen variant in sales order screen.
    I want to make gray the columns of material , material quantity in sales order screen but when I use screen variant and check the output only for these columns , it does not work ( I provided these in delivery document and it work)
    I want to know that is it possible to make gray for material and material quantity column with screen variant or I can use another way?
    Thanks.
    Lida

    Hi Lida
    If I am getting it correctly,
    When an end user enters any particular  sales order ,u dont want user be able to add additional line item into the already created document,Right?
    Now there are 2 possibilities here ,
    1.If order or line item has status completed then u want to block?
    2.Order is in incomplete state inspite that  u want to block.
    System does not stop addition of line item in already created even completely processed sales order.
    You can do this by enhancing code in PBO module.You need to take help of ABAP developer for this.
    We have used order and lne item status in vbuk table for this .
    Create a custom error message for validation.
    U can use exit MV45AFZZ for the same.
    Hope this helps
    Regards
    Mandar

  • Copy Control for Sales Order

    If you want to copy one particular pricing type (say "H") to a limited number of sales order (say 10). How would you do it without letting it take effect on all the other sales orders ?
    Let me rephrase the question.
    In the copy control settings, there is a pricing type that you can define for Sales Document to Sales Document at the Item Category Level.
    Originally it would be at "A".
    So now you want to change the pricing type for 10 sales orders previously created without affecting any other. How would you do that?
    Thanks

    Hi Noel,
    You can control through copy control settings for the future documents not for the already created document.
    And you also mentioned that the specific pricing type only for ten orders that you can do it manually,you put the pricing type what you want in the copy control settings then create 10 sales orders then change that pricing type to standard one then it will continue the stanadrd process
    I hope it will help you
    Rwegards,
    Murali.

  • Plant level authorization control for Internal Order

    Dear Sir,
    We create Internal Order using tcode KO01 and  being a multi plant scenario , we want to have an authorization control on Internal Order creation/change so that plant or profit-center level authorization rights can be given to the users .
    We request you to Kindly guide us about the steps to be followed for addressing such requirement .
    With thanks and Regards
    Sonia Agarwala

    Sonia-
    It can be done. You have two options.
    1. SAP security - when your security person can limit a user by plant, profit center etc using authorization objects.
    2. Validations - Here you can create a validation where you define you logic. In your logic you can restrict set of users who can access a set of fields (profit center, plant etc). If he deviates, the system can issue error messages which is maintained in validations. Use transaction GGB0 to create validations.
    Hope this helps.
    Shail

  • WBS Settlement rule control for service orders

    Hello,
    We have an requirement to implement validation point for service order settlement rule. Currently there is no validation check of settlment rule for service order. So that the settlement is happend to incorrect receivers in service orders.
    For example :
    Service order created for company code - 400 and the settlement rule receiver should be WBS which is belongs to same company code but some case , user are maintained wrong WBS in settlement rule which belongs to some other company code.
    Can you please hlep us on this requirement and suggest any enhencement point avalible on the same.
    Thanks
    Risha

    Hi,
    Please go to okg2,
    Calculate wip or result analysis
    remove the tick for Order In Engineer to Order Production
    Now run result analysis and check whether settlement will not happen for cross company code.
    please check this and revert back.
    Thanking you
    Vengaiah Chowdary

  • Copy controls for service orders

    Hello Experts,
    How can i do copy control from service order to another order? as I don't want to copy the components from the reference order.
    Best Regards,
    Amr Elfakharany

    Hi,
    There is no option to prevent this. When you create a order with reference the operation and components are copied from the referenced order. A solution would require a modification.
    -Paul

Maybe you are looking for