Screen covered with green and blue pixels (visible on dark colors)

Hello,
I have this tablet since beginning of April, and since few days I've noticed the little dots on the top of the screen.
From far away it looks like dust behind the screen, but by having a closer look, it's like pixels that stay green and blue when the rest of the image is dark.It's very visible when I'm using the tablet with no lights around me. i've tried to restart the tablet, and even when It's loading with the SONY sign, I have that! what should I do ? Did people had that issue before ?  
(BTW, The screen is also unresponsive when plugged to charge)

I encounter the same problem. I bought my Z2 tablet 16GB from the Singapore Sony Store. I got it for one month and the same pixel problem appeared.   I send it in for servicing at the Singapore Sony care centre at 313 somerset outlet.. One week went by and nothing happened. The service was bad, no reply from the customer care or technician. They gave me a website so i can check the status of the servicing but all it shown on the page was pending.. one full week and still pending. I had to call them once and asked them what happened, the Sony personal over the line could only say they can check and get back to me. The next day i called again to check if any technician has even start and immediately right after that they called me to go down to collect. Turn out they are giving me a new tablet. And the screen protector was not refund to me as they said that the device was still in the service centre.. had to buy a new one for myself. Such a disappointment in the servicing.. and now the current one i am holding as the same freaking problem.. also i notice the corners of the screen has some yellowish hue.    

Similar Messages

  • My Screen is filled with green and blue dots- pixels dead?

    Hi I have had ben Macbook for 2 years with very few issues.
    I noticed today that when I switched on my screen is filled with waves of green, some blue colours through the desktop background. Is the screen knackered or can this be resolved?
    Many thanks in advance

    Somehow, you've managed to post in the new 24" Cinema Display section. You'll probably have better luck with an answer in the Macbook section. Cheers.

  • Mbp screen covered with verticle, pink, one pixel lines

    i just got back from class today and opened my mpb and i found the screen to be completely pink. it was cover with tons of one pixel pink vertical lines. when i connect it to my tv, the picture is fine. i also do not have an nvidia chip, so i dont believe its related to that problem. i ran the hardware test and got this error.
    4SNS/1/40000000:TB0T
    i also believe my warranty is up with apple, and ideas on what i should do.

    Welcome to Apple Discussions!
    The error code indicates a problem with a thermal sensor. I don't know that this has anything to do with your display problem.
    Since the video artifact is not evident on the external display, it sounds like you may have a problem with your built in display or its connections.
    Do check with Apple and verify if your warranty is up or not. If you are in the last few days, whatever it is will be covered.
    Good luck!

  • Green and blue patchwork

    I woke my Mac and the screen had gone green and blue patchwork!
    what's that all about?
    I have an Apple 20" LCD screen

    I get the same thing sometimes as well, rather disturbing when that happens hey!
    I have a 23in cinema display hooked up to a PowerMac

  • Green and blue dots around all the screen

    I have noticed that green and blue dots appear around the screen of my tablet, i have send to sony service, can anyone have this issue too? it has only 1 month of use...

    Same problem on my tablet (second one, first i already replaced) green dots all over screen.Two months of use.
     Model is sgp511 b2/b 14w16. Sony (if any of you guys reading this) please do something about that, your tablet is not cheap to have this problems. 

  • Qosmio F30-117 - green and blue lines on the screen

    So my F30-117 has been working well recently until I turned it on and had green and blue lines (sort of like scan lines) overlapping the screen.
    I tried to install new drivers from nvidia, but that didn't work, as Vista just picked them up as unknown.
    Anyone got a solution? Do you think the graphics card needs to be reseated?
    Thanks in advance!
    - Shayde Zehetbauer.

    You can easy determine what the reason is for this.
    Do you know how?
    Just connect an external monitor to the notebook and check the picture on it.
    If you have the same issue on the external monitor the reason is the graphic card and/or mainboard, if not its an internal display issue.
    Check this!
    Furthermore you should only use the drivers from Toshiba. The Nvidia drivers dont have an overheat protection so the graphic chip could be damaged. Its on your own risk.
    So try to install the drivers from Toshiba.

  • GREEN AND PURPLE PIXEL DOTS ON IMAC 27 SCREEN!!

    *little green and purple pixel dots on my imac27 screen._ The dots are not permanent on to a specific place they change randomly and ive got them on my screen 1-2 times per day 1-2 hours each time (not all the time).Does anyone knows whats happening?

    Hi-
    Have you applied both iMac 27" firmware fixes?
    First, do this...
    http://support.apple.com/kb/DL984
    and then this...
    http://support.apple.com/kb/DL998

  • Phone went green and blue with lines and then switched off, apple symbol now appear on and off, any ideas?

    My phone while using went green and blue and then switched off, now apple symbol flashes on and off , any ideas as to what is wrong?

    NNo seriously, you have to restore it to its last backup, it froze in the middle of something and now it is malfuning

  • Problem extracting red, green and blue from ColorModel

    Hi everyone,
    I'm attempting to write a piece of code to extract the red, green and blue components from an image using the ColorModel class. When I attempt to run my code below, I get the following error: Exception in thread "main" java.lang.IllegalArgumentException: More than one component per pixel. Does anyone know how to extract an integer representation of the red in a pixel in order to solve the problem? Here's the code snippet:
    public void getRGBValues()
              String imageFilename = new String("C:\\Documents and Settings\\David\\My Documents\\My Pictures\\blue hills1.jpg");
             PlanarImage image = JAI.create("fileload", imageFilename);
             //Get the color model for that particular image
             ColorModel imageColorModel = image.getColorModel();
             //ints to store the appropriate values for each colour component
             int totalRed = 0;
             int totalGreen = 0;
             int totalBlue = 0;
             int averageRed = 0;
             int averageGreen = 0;
             int averageBlue = 0;
             int pixelNumber = 0;
             int pixelCount = 0;
             //Loop to extract the colour values out of each pixel in an image passed into the class
             for(int i = 0; i < image.getWidth(); i++)
                  for (int j = 0; j < image.getHeight(); j++)
                       totalRed += imageColorModel.getRed(pixelNumber);
                       totalGreen += imageColorModel.getGreen(pixelNumber);
                       totalBlue += imageColorModel.getBlue(pixelNumber);
                       pixelCount++;
                       pixelNumber++;
                  pixelCount++;
                  pixelNumber++;
             averageRed = Math.round(totalRed / pixelCount);
              averageGreen = Math.round(totalGreen / pixelCount);
              averageBlue = Math.round(totalBlue / pixelCount);
              System.out.println("Average red is " + averageRed);
              System.out.println("Average green is " + averageGreen);
              System.out.println("Average blue is " + averageBlue);
    }

    You are misunderstanding the ColorModel methods. The color model can translate between colors and pixels, but it doesn't know or hold pixel data.
    I don't know the JAI, but if you use J2SE classes like BufferedImage, this is easy to do:
    BufferedImage im = ImageIO.read(input);
    int argb = im.getRGB(x, y);
    int r = 0xff & (argb>>16);
    int g = 0xff & (argb >>8);
    int b = 0xff & argb;

  • Why my phone doesn't have that Red Green and Blue circles on camera, I have an iPhone4 v7.1.1

    My classmate has an iPhone 4/4s, the camera has Red Green and Blue circles while mine doesn't have that circles.

    Does your classmate have an iPhone 4? Or a 4S? There is no such thing as a 4/4S. Even with the same version of iOS, different models may have different features. As far as I know, the live filters are only available on the iPhone 5 and later.

  • Screen flashes between desktop and blue windows 8.1

    Just spent time with windows support but no solution yet. After logging in  laptop screen flashes between desktop and Blue screen  - Windows 8.1.  This does not happen in Safe Mode The windows support person was trying to get me to update drivers but all the install options on HP site don't work in Safe Mode.   Please help.

    Just spent time with windows support but no solution yet. After logging in  laptop screen flashes between desktop and Blue screen  - Windows 8.1.  This does not happen in Safe Mode The windows support person was trying to get me to update drivers but all the install options on HP site don't work in Safe Mode.   Please help.

  • My iPad color changed?the background is now green and blue .what should I have to do?

    My iPad color changed?the background is now green and blue .what should I have to do?

    go to settings. press on background and wallpaper. choose your new wallpaper. your friends might have changed it on yours or something.

  • My MacBook Air is frozen on opening screen. With apple and thinking circle. Nothing else is happening.

    My MacBook Air is frozen on opening screen. With apple and thinking circle. Nothing else is happening.

    Mac OS X: Gray screen appears during startup
    Read and follow all the steps.
    The article makes reference to your OS X install disc. When asked to start your MacBook Air with that, use OS X Recovery.

  • IPhone 5 screen went green and blue and then faded to black?

    I was on my iphone and had messages open and than the screen just froze and turned blue and green and than slowly faded to black and now won't turn on. When i plug it into the wall it doesn't do anything. The phone is still on because my dad called the phone and it still rings. It has a glow to it too when it is in the dark so the screen must be on or something, i don't know. Any help please!!

    See Here for  >  Frozen or unresponsive iPhone
    Try this First... No Data will be Lost...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • IPad 2 works perfectly fine except that the screen is all green and fuzzy with lines going through, what happened?

    Last night, my iPad 2 fell so gently that I don't even understand what happened. Anyways, it fell off the bed and now the screen is green and fuzzy. I read somewhere that there was a hardware problem and also that it could have moved something that might have caused it to be green and fuzzy. I also read to smack it on the back of the iPad and see if it works but it hasn't.. What happened, and do you think they will replace it?

    Even if the smack on the back worked it would be on
    Y a temporary fix. An iPad that falls off a bed onto the floor probably needs a trip to the service department. Contact Apple to make arrangements for repair.

Maybe you are looking for

  • Call function '' in update task - code inside is BDC

    hi to all, in using call function '' in update task the code inside is bdc. is this possible?  my scenario is from VA01 then post billing to VF01, i am using user-exit MV45AFZZ in subroutine userexit_save_document. i need to post billing after va01 s

  • Having problems restoring my macbook air

    I recently purchased a macbook air ( second hand ), i have just tried to reinstall mac os x and it's asking me for my apple i.d to go ahead with the download, i have just set up a apple i.d and when i type in my details it ain't allowing me to downlo

  • ACS/ASA authentication for vpn access vs. console management access

    I have an ACS 4.2 Server and an ASA 5540. I have setup AnyConnect SSL VPN on the ASA and want to authenticate users using AAA tacacs+ authentication with the ACS and an external Windows AD database. I have done this successfully. I also want to use t

  • Image Quality suddenly reduced

    I have a Macbook 2.0 and I just purchased it about 4 weeks ago. I'm new to the Mac OS X but have used PC's all my life and consider myself an advanced user. I took some pictures with photobooth and imported some off of my digital camera when i first

  • BindingError while deploying an ear module on Websphere 6.

    I have an ear module which has following contents. a war module a jar module META-INF folder contains application.xml, ibm-application-bnd.xmi and was.policy. When I install it on Websphere 6, I am getting the following error. com.ibm.ws.management.a