Screen Darkness and low temps

I have accidentaly left my MBP in rather low temp. conditions one or two times (ie overnight in my car). When I first start it up after being in the cold temps there is a large verticle line of darkness right in the middle of the screen. This area of darkness is about 2 inches in diameter. I am not very worried about this problem, but I wondered if anyone else has experienced this. I am guessing that this issue is caused by the cold temps??? Any insight into this situation would be appreciated.
Seth
MacBook Pro 15.4' Mac OS X (10.4.8)

Seth --
Did you ever resolve the issue of the dark area in the middle of yoru MBP screen? I've just noticed a very similar condition with mine. It's kind of like the two sides of the screen are illuminated, but not the middle.
Not looking forward to taking mine in to Apple . . .
-- Gordon
MacBook Pro 15 Mac OS X (10.4.8) 2g memory

Similar Messages

TS3999 I see high and low temps in place of scheduled events. Why do I see weather instead of events? Is there a way to switch ?

Anyone out there with a solution? I don't know how it got there but I now see high and low temps in my Calender view 68/45 and I don't know how to get back to only events.
Thanks

Check Settings>Privacy>Calendars. You may have a weather app that is accessing your calendar and entering this information. If so, turn it to Off and see if it stops.

Iphone 5 screen dark and phone ringing non stop

Is this a common problem? Is there a simple fix?

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
If the problem comes back, set it up as new device, explained here:
How to back up your data and set up as a new device

Not only a yellow screen, but its dark and grainy

There are so many fora discussing the yellow tinted screen. I got my really yellowish screen replaced and now I have a nice iPhone 3G with a yellowish tint BUT with white whites. The icons look great now! This is good and I gather that this is how it was meant to be. However, now that the graphics looks great in general - the multimedia graphics are still much to red/yellow and dark - that is album covers, films, photos and pictures taken with the camera. AND, since they are very redish-yellow the low keys in dark and neutral areas become much more grainy. I cant even use my photos like a portfolio anymore, compared to the old iPhone. The camera performance have always been quite good for a 2 mp camera, but now it takes quite bad pictures due to this fancy and deliberately made tint with grains as a result.

Thanks for reply, but no I have firmware 5A347. I have seen the screens of at least ten various iPhone 3G´s with that firmware and they look almost the same as mine - as described above. I think this is how Apple wanted them, but not to everyones pleasure. And as such its NOT the same screen as the first gen. iPhone as claimed during Steve Jobs presentation. At least mine is not, among many many others...

T61 LCD display flickering with big patches of black and going to dark (very low light) afterwards

I have a T61 which has Intel graphic card. It is seven years old and at times has a noisy fan.
Very recently it started to have problem with its LCD, it starts with slight flickering of light intensity from corners of screen, here and there, eventually covering the whole screen, goes away and comes back, happens for few seconds, the pattern repeats for few times, then big (screen-wide) patches of back starts to cover the lower 1/4th, one-half, 3/4th of screen, flickering between the screen content and black screen, till they cover the whole screen after 30-60 seconds. At that moment, the screen is very dark but with a close look, it is still possible (but very hard) to read it. Connecting it to external monitor (through its VGA), it is working very well. Showing same screen on both LCD and external monitor at the same time, the picture on external is solid, but picture on LCD can have this issue. At the moment of writing this message, the problem seems to not happening!! but it was happening during the past whole week including few minutes ago. I searched online and here in the forum and read few posts, and found about these issues:
- some T61's have Nvidia GPU and thermal effects over the time and stress on the package or solder balls can make loose connections (this is probably not my case since the interface to graphic card is by Intel)
- problem with LCD itself (it is working fine just right now)
- problem with graphic card (it is working very well over the VGA to external monitor)
- problem with the ribbon from mother-board to LCD (tilted the screen in different angles when the black patches and flickering are happening and didn't change the chaos much in any direction of making it better or worse)
- problem with bulb inside the screen (maybe the cause, but somehow decided for the last few minutes to working fine)
- problem with inverter (don't know yet what this part it)
- problem with some sort of mechanical part(s) being loose, gently tapped on sides and back of the screen while the phenomena was happening and again didn't have much effect on it in any direction.
I appreciate your time and good gesture of help, many of you would know more scientific/engineering ways of approaching the problem and how to root cause it. My sincere thanks beforehand.

> the screen is very dark but with a close look, it is still possible (but very hard) to read it.
That sounds like a defective CCFL backlight or inverter.
>- problem with bulb inside the screen (maybe the cause, but somehow decided for the last few minutes to working fine)
A CCFL is essentially a high intensity fluorescent bulb. One failure mode is flickering.
>- problem with inverter (don't know yet what this part it)
The inverter is a power supply that converts the low voltage DC used in the rest of the ThinkPad to high voltage to drive the CCFL. I would expect that to fail catastrophically rather than cause flickering.
What to do?
CCFLs backlights are relatively inexpensive ($10 to $15 on eBay) but they can be difficult to replace because they're delicate. You may prefer to replace the entire LCD panel assembly or even the entire top cover assembly (which also includes the inverter card.)
The Hardware Maintenance Manual for the T61 provides detailed instructions for doing this sort of stuff if you'd like to see what's involved and decide what you feel comfortable doing.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Screen Going Dark and Then Black

Although my computer is not an Intel, I have been following the discussions here because of the flickering problem. I intend to buy the i7 when the next series comes out. I posted my problem on the regular iMac G5 forum but received a very limited response specific to the problem.
My iMacG5 is the initial model and will be 6 years old this coming October. I have not had this problem before.
One day, the computer screen went black. Took it to Apple. Either mother board or power supply. Changed power supply and computer worked but technician damaged screen and bezel. Apple changed screen and bezel front and back. Came home, working fine but notice very slight and quick flickering sometimes. Suddenly, screen went dark and then black. The F14 and F16 keys could not change it. Took it back to Apple but problem could not be repeated. At home, problem occurs. Right now, screen at brightest but then brightness cuts back significantly but screen is as usual except darker. Computer can be used but darker. After a while, screen would go black. Can still hear computer. Fans normal speed. Light at lower right still blinking but when touch space bar or mouse, light at lower right goes off and computer stops but still black screen. When I unplug cable from back and wait 15-30 minutes and restart, screen bright again but then darkens and cycle repeats itself. Screen Saver not on. Beside the bezel, only items change are the power source and the screen.
CHECKED CONSOLE AS BEST AS I COULD. ON TWO OCCASIONS FOUND FOLLOWING NOTICES: BOOT CACHE.PLAYLIST: UNKNOWN ERROR: -1. ANOTHER ONE: LOCAL HOST KERNEL [0] APPLE SM_SHUTDOWN CAUSE = -100. THESE MAY HAVE SOME SIGNIFICANCE ALTHOUGH THERE'S A LOT MORE THAT I DON'T UNDERSTAND.
HOPE SOME OF YOU CAN HELP. Thanks.

You should visit your nearest Apple Store as soon as possible for getting it done perfectly !

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

HI all, i'm using Mac Pro 15" Retina. My screen goes darker and after brighter after a while? How to fix it?

System Preferences > Displays.
De-select "Automatically adjust brightness"

Help--why has MacBook screen gone dark and how do I get it back?

I have a MacBook (model 4,1 running OS 6.8). I use the MacBook as my desktop computer in conjunction with a separate desktop monitor. Today, when I unplugged a USB hub from one of the ports (after carefully ejecting anything on the desktop that needed to be ejected before unplugging), the screen on the MacBook--not the separate monitor--suddenly went dark. I thought it had gone to sleep or into screensaver mode, but noticed that the white light on the MacBook also wasn't showing.
The separate monitor display (on which I'm typing this message) seems fine. I checked DIsplays/Arrangement in System Preferences, but both displays were detected in their usual arrangement, though I did notice that the working display has a white bar across the top but the MacBook display doesn't have one. I clicked "Detect Displays," but that didn't change anything.
I then did a restart, and things seemed to go as usual: the shutdown went okay and on restart, the white light went on on the MacBook and the monitor screen lit up normally. However, the MacBook's screen is still dark and the white light is off.
Can anyone tell me why this happened and how to get my MacBook screen back? I don't know whether unplugging the hub caused the problem or whether it was just a coincidence that something that runs the MacBook display happened to fail right then. Would appreciate any help out there very much--thanks!
PS: Just tried shutting down and powering on again with the separate monitor unplugged, but the MacBook screen still stays black and the white light shuts off as soon as the desktop loads. When I plugged the separate monitor back in, it worked fine. So the problem doesn't seem to be a conflict with the separate monitor (which I've used for years).
Message was edited by: Turtlewiz

Update: I went away for an hour, and when I came back I saw that the white light had gone on as usual when the MacBook went to sleep. When I touched the keyboard, both displays went on; however, the MacBook display went dark immediately and the white light is still out.

After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2. After clicking the download button, the screen just turns dark and is frozen. Any idea what is happening?

After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2. After clicking the download button, the screen just turns dark and is frozen. Any idea what is happening?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

On iPhone 4, the screen goes dark and freezes when I start Safari

All of a sudden, today I can't access the internet via Safari on my Verizon iPhone 4. If I click on a link in an email or start Safari, the screen goes dark and freezes. What's up with this and what the fix?

Hi
Try holding sleep/wake + power button for 10 seconds, until you see the Apple Logo.
See how that goes.
Taylor

Photoshop Elements 11 Organizer: Full screen view of lower quality than with PSE 10 and before?!

Upgrading from PSE 10 to 11, I noticed that when I watch my images with the organizer in PSE 11 in full screen view mode (F11), while the images load faster, they are shown in a lower quality than in PSE 10 or any other version of PSE that I owned before. In PSE 11, after the initial viewing in full screen (in the "fit screen" mode), when I click with the mouse on an image to display the "100%" view, there is a delay and the program says "Loading...", after which the 100% view in the full screen mode appears. When I then click another time with the mouse on the image to get back to "fit screen" mode, I get an image of better quality than during the initial view!
So it seems like the program first gives a faster, but lower quality view of the image in full screen mode, and only after the user requests a 100% view, it actually loads the image with full detail, which is then preserved when going back to the "fit screen" view. This is a serious issue for me, because I also use PSE organizer to present my pictures to other people, and I don't want to show them some lower quality versions of my images, but the full quality ones, without having to first choose "100% view" and then go back to "fit screen".
How can I make the PSE 11 organizer give me a full-quality full screen image right away, as this used to be the case in PSE10 and before?
(I have both versions, PSE 11 and PSE 10, now on the same computer and tested this to confirm that the PSE 11 initial full screen view is of lower quality than the PSE 10 one. Also in PSE 10, there is practically no delay for displaying the "100%" view afterwards, indicating that the image was loaded with full detail right away.)

- Update:
* Adobe's senior support level has replied to me about this issue as follows:
"Thank you for contacting Adobe.
When you press the F11 button, Organizer 11 uses the Bicubic
interpolation mainly because it is less processor intensive compared to
Bicubic Sharper, and it helps to create the preview on the fly, rather
than based on the thumbnail cache.
When you zoom out from the 100% view, Elements Organizer uses Bicubic
Sharper. This is because Bicubic Sharper is used for image reduction, so
if the 100% view is larger than the available screen space, it will need
to shrink. The Bicubic Sharper images may look more crisp however, Like
any sharpening algorithm, Bicubic Sharper introduces halos and
edge-enhancement artifacts. Those halos are typically slight, but any
further sharpening (which you'll need when preparing an image for print,
for example) will exaggerate them.This is expected behavior. The
Organizer isn't great for determining exact quality, I recommend you to
use Elements Editor for this purpose.
Thank you,
Bobby Johnson,
Adobe Technical Support."
* My reply on this to Adobe is:
"Hello Bobby,
thank you for your reply. Now at least we are talking about the same thing.
Why I am wondering about the choice to use the "Bicubic" algorithm when pressing F11 in PSE 11 is that all previous versions of PSE that I owned (which spans from PSE 6 to PSE 10) did use the "Bicubic Sharper" algorithm right away when pressing F11. So apparently Adobe didn't worry about processor intensity of this algorithm then, and computers are getting all the time more powerful.
It is true that in some situations, the "Bicubic Sharper" algorithm may introduce halos and edge-enhancement artifacts, as you write. On the other hand, especially on smaller resolution screens, the results of the "Bicubic Sharper" algorithm may look more crisp and lively, while the ones of the "Bicubic" algorithm may look more flat and lack fine detail. This is not only my personal opinion, but as I have brought up this topic in several forums, I can see that I am not alone here.
So assuming that the question about preferring "Bicubic Sharper" or "Bicubic" as a default algorithm when pressing F11 is partly a matter of taste, and partly a matter of the hardware the user has available, why can Abobe not give the user an option to choose which one he/she would prefer? For instance, F11 gives full screen view with "Bicubic" applied, and CTRL+F11 with "Bicubic sharper"? Or make this an option in the preferences?
As I am using the PSE organizer also to present pictures to other people (and I know many people who use it that way too), I would like to show them my pictures as sharp and detail-rich as possible. Therefore, I would highly appreciate an option as described above to be implemented in the PSE 11 organizer via an update. It should be fairly easy from a programming point of view, since both algorithms are already contained in the program anyway."
* If you support this suggestion of mine as stated above, please also contact Adobe accordingly! The more support requests they get for this, the more likely it is that they will implement this update! You may mention my case number 0184046323 for reference.

My IPad screen is dark and will not turn on. I have charged the battery and nothing. I have tried to reset the device as well with no luck. Any suggestions?

My IPad screen is dark and will not turn on. I have charged the battery and no luck. I have tried to restart it multiple times with no luck. During the restart, the screen will flicker like it is trying to restart but the silver apple never shows. Any suggestions?

Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

My screen goes dark and a message says I need to shut down. What does this mean for my computer?

My screen went dark and a message told me to shut down the computer.

It's a Kernel Panic, see > Resolving Kernel Panics

HT1937 My iPod is working fine , syncing with itunes but screen still dark and not responding !! Please help thanks

hello everybody , I have an iPod touch 4g . Now a few days ago it got wet in water . i didnt notice that but when i came to know , i saw it very hot . i kept it away in open , after some time it cooled down but it was dead . it wasnt turning on . then i searched it on net for fixes... finally i tried the rice method , i kept it in rice filled in a sealed box for 1 full day . now i kept it in charging ...its syncing with itunes and making that sound but the screen is stilll dark and wont respond . What should i do ? please help! thanks

Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Screen Darkness and low temps

Similar Messages

Maybe you are looking for