Screen dim / Input/output error

I have an Asus N80 laptop. With the latest kernel/nvidia update suddenly my screen is getting dimmed. I've tried http://bbs.archlinux.org/viewtopic.php?id=63102 which seems to be the solution, however when I try:
echo 1 > /sys/devices/platform/asus-laptop/ls_switch
I get:
bash: line 0: echo: write error: Input/output error
Any help would be greatly appreciated. Thanks

sounds like you have a damaged cd.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Similar Messages

I am in mavericks disk utility recovery mode as my mac book will not boot up & stays only on the grey apple screen. When I verify the disk I get open error5 :input /output error on Syst stuck on 1 minute pouring out over 50 error messages & still counting

I am in Mavericks disk utility recovery mode as my mac book pro will not boot up & stays on the Apple grey screen . When I verify disk permissions I get
Open error 5:"input/ output error" on syst with over 50 of this messages & still counting . Disk Utility says 1 minute
But this has been going on for over 10 mins .
I can not verify disk or repair disk .
I have tried to reinstall mavericks operating system but it says my hard drive is locked which is very strange .
Does anyone know what is going on here ?
My system looks like it has been totally corrupted . Thanks Andrew

Could be. The "lock" isn't actually looking for a password.
WARNING: This will completely erase the ENTIRE hard drive.
What you would need to do is boot to recovery > disk utility > select the MAIN drive on the left side > partition > change partition layout from CURRENT to 1 PARTITION > ensure on the right side it says Format : Mac OSX Extended (Journaled) then push APPLY.
Then if it will allow us, close the windows until you see the 4 options popup again and select "Reinstall Mac OS X" select the Mac HD and you should be good to go!

I'm trying to backup a my harddrive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen

I'm trying to backup a my hard drive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen and spinning wheel. I've tried everything https://discussions.apple.com/message/20580424#20580424
any help will be greatly appreciated.

Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570

External Hard Drive not Readable & Input/Output Error?

I was using my OWC 300gb external hard drive for a while and it's worked great. I had a bunch of files on it, but I recently transferred everything to another external HD I have, which worked fine, so I could erase this 300gb one. I can't remember what happened, but somehow my Macbook doesn't recognize this hard drive. I think erased everything and then unplugged it without ejecting it first. Anyways, nothing is on the the drive anymore and I get this error message:
"The disk you inserted was not readable by your computer"
This pops up when I restart my Macbook. When I try to use Disk Utility, it greys everything out on the partition and Disk Repair tabs. On the 'Erase' tab, it will allow me to select Erase, but then gives me the error:
"Input/Output error"
Does anyone know how to get my Macbook to see my drive (so I can start to partition it)? For some reason only Disk Utility acknowledges it's there, Finder won't.
Anyone have any tips of what it is or what I can try? I did try to use my OS discs booting up holding C, but that doesn't work either.

Hi there. Everyone is saying on these forums that the hard drive is failing...suck. I went and bought a new when I got input/output error and found that the new one showed the same input output error, making it impossible to partition the disk. Then the guy in the apple service center told me the new one was bad too, after having seen the code that came up related to my new scorpio 250 GB drive. Instead of sending it back, I took it out and installed the old one..however this time with a slihtly more of pressure on the tape holding down the hard drive cable between the hard drive and the circuit board. Amazingly, this time it didn't even show any hard drive at all! Then I understood what was wrong. It was exactly what was indicated an "input/output errror"! ..the cable was broken. I bought a new cable, well the Powerbookmedic sold it as new but it was an old working one that arrived. Immediately, after change of cable the old hard drive and now also the new 250 GB works perfectly! I remember that some interesting symptoms prior to all hard drive problems appeared, such as not being able to start up properly, strange blue screens, flipping question marks etc. I remember that shaking the comp occasionally worked to get it going. No wonder, shaking occasionally made it work and i believe the damaged cable maybe changed position and started conducting. The cable is very sensitive and probably should not be taped down so hard as the first service center guy at apple had done with mine when he fixed it the comp a few years ago. Polymers/plastics bent heavily become fragile/brittle with time and are specially sensitive under pressure/bent. Note that my old damaged cable still conducted and showed the hard drives but didn't work fully. I hope this will help someone, it took me 2 month to figure out..

Help -- backup data with disk utility, input/output error.

My problem started when my MacBook Pro computer (with OsX) froze. When I restarted, the startup screen stayed on for a long time. Now, the startup screen stays on for a few seconds and then shuts off. I do NOT have a recent backup of my data. I have tried the following:
Went onto the recovery partition, used Disk Utility. When I verified the disk, it said it needed repair. When I tried to repair the disk, it said it could not be repaired.
I then tried to copy a disk image of the hard drive onto my external hard drive, but it says there is an "input/output error" and won't allow it. How else can I backup files on my computer at this point?

Had issue partitioning 2TB my passport drive, got input/output error while using disk utility.
Here is what I did to get my external disk back
In Disk Utility
1) Try to use erase option first, it failed
2) Try to partition the disk, failed as well.
3) Then try erase option again, then ... it worked !!

Restoring .dmg image from external to Mac HD in Disk Utility: "Unable to scan image (Input/output error)"

Hi guys,
So I've got a problem with restoring the image backup I did (using Disk Utility) of my 500GB HD on my MBP which was acting weird or maybe even crashed a few months ago. After creating the backup image and putting it on my external device, I installed Mavericks back to see if everything was alright (mainly the HD) and everything seems okay.
I did try restoring the backup image through disk utility before installing mavericks (thus erasing everything again on the HD) AND after. But nothing..
The whole process starts fine and then it starts scanning the image when after maybe a good 10-15min in I get a message that says that it was unable to scan the image. I tried verifying the disk(s), everything came out "OK". Also tried scanning it through Images > Scan image for Restore... with the same results.
While searching I've seen people getting messages like "Unable to scan filename.dmg (Invalid argument)" and "Unable to scan filename.dmg
(Internal error)" but none have (Input/output error)
The screen grab is below.
I also came across something about using terminal/commands but I'm not that savvy with it, especially considering that those there had issues with either mounting or trouble finding the image.
I've also tried moving the backup image to a different external device 2TB and also the desktop because I read it may have to do with the format of the externals or maybe free space. But THEN I would get a message saying
"The Finder can't complete the operation because some data in "Mac HD Backup.dmg" can't be read or written. Error code -36"
Fyi ALL my externals are HFS+/Journaled and the backup image format was compressed.
I REALLY don't know what to do next. Was it the wrong move to create a dmg image? Have I lost everything? Is there still a way out?
If anyone can help, THANKS!
2012 MacBook Pro, Mac OS X (10.9.3)

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Trying to erase hard drive, but get "input/output error". What does this mean? What can I do to erase my hard drive so I can reinstall?

Hi all,
My computer a few days ago wouldn't start up, would just stay at the gray loading screen forever. So as a result I tried to reformat the hard drive and reinstall, but I can't reinstall, until I erase the hard drive, but when I try to erase the hard drive it says the erase failed due to an input/output error. What does this mean? What can I do to fix my computer?

The startup drive is failing, or there is some other internal hardware fault.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

The operation couldn't be completed Input/Output Error in FCPX

So i updated my FCPX to 10.0.4 from 10.0 and all of my media/projects are on a external usb hard drive and now after updating I'm receiving an error when I launch FCPX and the error states "The operation couldn't be completed Input/Output error" and the option i have is click ok and then it opens up FCPX.
If i don't have the external USB hard drive plugin i don't receive the error and FCPX open up with no issues and much fast because I assume it doesn't have to read the media and the projects.
Thanks for you help

I have no idea what the specific error code means but input/output errors can sometimes mean a disk is failing. Make a couple of backups of all important data before doing anything else.
Verify your startup disk using the First Aid tab in Disk Utility. If the disk needs repair boot from your Leopard DVD and repair your disk from Disk Utility under Utilities on the screen after you choose your language. Repeat the repair process until Disk Utility reports all is well.
If Disk Utility doesn't find any errors you might want to try a new download of the update and keep a sharp eye on your HD for anything else that might indicate all is not well. Take special care to back up important data.
If Disk Utility finds errors it would probably be a good idea to pay a visit to the Apple Store to have them check out your hard drive even if Disk Utility is able to repair the errors.

Disk Utility - Input/Output error when creating disk image

Hello!
A few days ago I was unable to turn on my Macbook Pro, and was stuck on the white screen. I've been searching around quite a lot on this forum, and before I try fixing anything, I REALLY need to back-up my files! I just bought a 2TB hard-drive, which I have partitioned to GUID and Mac OS Extended (Journaled), (it perfectly works on another Mac).
I now want to attempt to create an image of my harddrive (Macintosh HD) onto my external drive (which is empty). I've tried doing this both in 'read-only' and in 'compressed', but about halfway through, I receive a message saying "Unable to create 04/2014 backup.dmg (Input/Output) error".
I saw on another similar post that I might want to install DiskDrill or DataRescue. I'm fairly sure this is impossible for me to do, since my screen is completely white, and I'm unable to access my desktop.
I can only access Disk Utility through pressing command+R when starting my computer. Hence, I need to successfully back up my files through Disk Utility...
I'm aware that my HD may be corrupted since this is happening, but there must be a way for me to put an image on my external HD?? A few days ago, when I clicked on Repair Disk it said "Impossible to repair: invalid node structure". But now, it says that "Macintosh HD appears to be OK". I have no idea what's changed... And I can still not start my computer past the white screen...
I'm very bad with IT and computers, and have extensively tried to fix this on my own, but I'm now stuck here, with this "input/output error"...!
Any suggestions would be greatly appreciated! Thank you!
PS: I do not have Applecare, this is an old computer from 2009.

Thanks for your answer.
Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

External Hard Drive Input/Output error

I recently started having problems with an external hard drive setup that I did not have problems with prior to upgrading to 10.5.5 and trying to setup the drive to be compatible with Time Machine.
The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
The first problem I ran into since upgrading and reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
Thanks,
Paul Rugg

Thanks for the suggestion.
Do you think that would work better than Drive Genius? I bought Drive Genius 2 and it does not even see the drives when they are plugged in unlike Disc Utility which can see the drives but cannot mount either one.
Maybe this following post I made to a different questions may help. The data on the drive is other buying another program for if it will work. I think my next step may be to go over to a friends place and try to mount the drives on his computer and transfer stuff off if they connect.
text below posted to other question relating to external hard drive problem.
I have recently had the same mounting issue with my new external hard drive. I just purchased a new 750Gb Western Digital Sata drive and got everything transfered over to it. Immediately, I got an error saying that the drive had been ejected incorrectly even though it was still plugged in. I was a little curious. I restarted the computer (hard drive still plugged in via USB 2.0) and the drive showed up just fine. I plugged another 250Gb drive into the same case (2 bays) and the 250GB drive showed up just fine.
Well, I then noticed there was an OS upgrade available when I ran Software update so i ran it and when I rebooted the drives were gone. I can see the drives in Disc Utility, but they will not mount. Drive Genius cannot see either disc. Disc Utility says I need to repair the drives, but when I do it says they are fixed but they don not mount.
The problem really seems to be related to mounting USB external drives. I got ahold of 2 seperate external firewire hard drives and one shows up just fine while the other has the same problem (both work on other systems. I would try wiping the drives and reformatting but ALL MY stuff is on them and not everything has been backed up. Yuck! I have not tried connecting my hard drive to another Mac yet.
The drives being used are #1 Maxtor Maxline Plus II 250GB SATA/150 HDD 1.5b/s 7Y250m00654ra
and #2 Western Digital WD7500AACS WD Caviar GP Green Power drive.
I have another post similar to this and I have not received any feedback, but I have been doing my own searching and have found similar posts on the net.
Anybody have any clue what might be going on here? It really seems to be related to my upgrade.

Disc image input/output error

When burning a disc image using disc utility, I get the ever so popular input/output error message. I cannot find anywhere on these posts a solution to this problem. It is not dirty discs, etc. It happens when I try to copy dvd's... which are not licensed, etc.

Could be so many things, Input/Output errors are generally loosing contact with a device for a variety of reasons, do you get any error # with that?
Open Console in Utilities & watch for more info whn you try to burn, or open the Disk Utility Log if there.

"input/output error' when making disc image from DVD

I've had problems installing Logic, and a Pro Apps Genius at Applecare suggested I try making an image of the problematic DVD (Audio Content 1) and then trying an install that way.
While I can make an image of the Install disc to my desktop fine, the Audio Content 1 disc reports an "input/output error".
This means I'm unable to copy the disc and then successfully install my Logic Studio.
Any ideas?

Thanks for your answer.
Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

Input/output error when copying a DVD

I created A DVD some time ago using Roxio. It plays in DVD Player on my Mac Pro, but I can't create a .dmg using Disk Utility. I always get "Input/Output error". I got the same result on my wife's newer Apple. I tried to Restore it but can't, and Verification shows no problems that I can see. I am able to copy DVDs created on Final Cut Express just fine. Any suggestions to help me create copies of an old DVD I love?

I just figured out how to get around the problem. Download Burn and use it to burn the VIDEO_TS file to a new disk. It must be something that Apple adds to make it hard to copy DVDs made from non-Apple software.

External HD - Input/Output Error

I had external drive that was not mounting or appearing on Disk Utility. The drive was out of warranty so I went ahead and changed the casing.
1.The drive appears on Disk Utility but still does not mount. DU only shows the root and not the volume.
2.Connecting it via USB tells me the drive is 298GB and appears as Maxtor 5000DV v0.1.00.00 Media. I connect it via Firewire 400 and it DU shows it as 128GB Maxtor.
Any help on what's going on here? DU also won't let me First Aid, Erase, or anything else on it. After I try to Erase it,Partition it, or anything it gives me "Input/Output Error".
10.5.2
Maxtor External (Actually a Seagate inside)
G5
Thanks for any help!

Adding:
What is the point of "Restore" and how is it used exactly?
Thanks!

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

Screen dim / Input/output error

Similar Messages

Maybe you are looking for