Screen dims on battery use. fn and f10 no help

Model 14-d001AU Notebook
Bright usable screen on mains power but when the power lead is removed the screen goes so dim you can hardly see it.
Battery indicator shows fully charged. No difference when fn and f10 or f9 used.
Many thanks
This question was solved.
View Solution.

Hi,
Try this steps to fix issue with Screen Brithness Low on Battery.
Left click on Battery Icon in system Tray(On screen Right Side Bottom) left click on Adjsut Screen Brightness and on Bottom on page Increase the battery as you want screen on battery Power.
Regards
Mukhtar.
I am an HP Employee.

Similar Messages

Screen dim after battery failure

after my battery ran down and unit shut off, my screen is so dim upon startup that i can hardly read it. the brightness control is not helping. any suggestions? (the battery has been in need of replacement for a while) thanks

it could be that you have the auto brightness thing on? you may be near a bright light and have the auto brightness feature in the brightness settings turned on. that feature is ******** IMO

Screen shots of lsmw using bapi and idoc.

hi
can anybody plz send me the step by step lsmw procedure using
bapi and idoc screen shots.
regards
vijay

Refer this link... it has step by step procedure with screen shots....
http://www.****************/Tutorials/LSMW/LSMWMainPage.htm
Regards,
Pavan

Ipod frozen with sync screen even after battery has died and been recharged

My wifes ipod nano 3rd generation is stuck on the sync screen even after it has been unplugged, the battery has died, and it has been recharged again.

Hi buddy,
In my opinion the only the only one that you can do is updating the BIOS as Akuma suggested. This problem is not software related so thats the only option you have I think. You can download the newest BIOS version here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
If not, contact an authorized service provider please. The guys can fix all hardware related problems can diagnose this problem. Maybe the mainboard or something else must be exchanged.
Good luck! :)

Used iphone and need some help, please

i got a used iphone and im tryin to set it up, but the screen isnt turning on, i mean there is little light but cant see anything. what do i do ?

bring it back. Sounds like it's broken, doesn't it?

Error using JDBC and DB2 - Please help

Hi, I need some help solving this problem. I ran the same program at my university and it worked. At home I am using TomCat4 and j2sdk1.4.1. I want to connect to the IBM DB2 Universal database personal edition v7. The program compiles, but when I run it, it says it can't find
com.ibm.db2.jdbc.app.DB2Driver. The class path was automatically updated when I installed DB2. What could the problem be? Please help because I really need to use this. Thank you.
Marianne.
This is my program:
import java.io.*;
import java.sql.*;
class testDB {
public static void main(String argv[]) {
try {
// load driver and connect to database
Class.forName("com.ibm.db2.jdbc.app.DB2Driver");
String url = "jdbc:db2:test";
          String userid = "the database name"; // blanked out
          String password = "my password";
Connection con = DriverManager.getConnection(url, userid, password);
// an SQL retrieval getting all rows in table
Statement stmt = con.createStatement();
String SQLStatement = "SELECT issueID, stock FROM test.issue ORDER BY issueID";
String theIssueId;
int theStock;
ResultSet rs = stmt.executeQuery(SQLStatement);
     // loop to step through each row of result set
     while (rs.next()) {
theIssueId= rs.getString("issueID");
theStock = rs.getInt("stock");
System.out.println(theIssueId + " : " + theStock);
// tidy up
rs.close();
stmt.close();
con.close();
} catch( Exception e ) {
e.printStackTrace();
}

Try add path C:\Program Files\SQLLIB\java\db2java.zip to classpath.

Blue Screen error message after using Rescue and Recovery.

Good morning - I unfortunately had to use the IBM Rescue and Recovery feature to restore my factory settings. However, now my computer is giving me a blue screen error during the startup process. Unfortunately it is not on the screen long enough for me to get too much information from it, but I have been able to get win22n51.sys as being some sort of error message. If I start the computer in safe mode it will load without the error. If I use the safe mode plus networking it gives the error. So I'm assuming it has something to do with the network drivers?
I would appreciate any ideas you all have for resolving/further diagnosing this problem.
Thank you!

Hello,
Perhaps this Lenovo knowledgebase article, "XP Crash: System may hang or restart with a previous version of the Intel PRO 2200BG Mini PCI adapte..." will be of help to you in resolving the problem?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Screen Resolution Troubles After Using HDMI and Converter

After using a StarTech HDMI converter to watch Netflix on my television, the resolution on my macbook pro is messed up. If I close Netflix the resolution returns, but after trying to use other programs like iPhoto and iMovie I ran into the same problem. As soon as I open those apps the resolution gets distorted and the screen is blurry. Like with Netflix, as soon as I close those apps the screen resolution returns to normal. Also every time I connect the converter and HDMI cord from my Macbook Pro to my television the resolution goes blurry, but the resolution is perfect on the television.

After using a StarTech HDMI converter to watch Netflix on my television, the resolution on my macbook pro is messed up. If I close Netflix the resolution returns, but after trying to use other programs like iPhoto and iMovie I ran into the same problem. As soon as I open those apps the resolution gets distorted and the screen is blurry. Like with Netflix, as soon as I close those apps the screen resolution returns to normal. Also every time I connect the converter and HDMI cord from my Macbook Pro to my television the resolution goes blurry, but the resolution is perfect on the television.

Screen dims after keyboard use

After several minutes of inaction on the keyboard, my screen will dim around 30%. A bit annoying when watching a video stream, for example. I'm assuming it's just a basic preference setting, but couldn't find it anywhere on my Mac or in the forum. Anyone know this one?

As an alternate, use the freeware utility Caffine @ http://lightheadsw.com/caffeine/ I use it on my laptop. Easier than changing the preference every time.
 Cheers, Tom

Video Screen dimming while filming using iPhone 6

As you can see in this video..
it seems as if a light was turned off while in fact nothing happened...
And this has occured in several videos which i have filmed using iPhone 6
http://youtu.be/jLms0KahOt4

UPDATE
So, after working with the guys at Apple, they were able to provide a solution. Now I have no problems using Home Sharing with my iPhone 6 Plus!!!
(I should add that I have the Linksys Advanced Dual-Band N Router (E2500))
The issue was fixed by giving one of the wi-fi channels a different name, thus splitting the channels into 2.4 GHz and 5 GHz. Then, I connected my iPhone to one channel (2.4 GHz) and my MacBook Pro to the other channel (5GHz). In this configuration, I have had no issues streaming my music and video.
It seems that the problem is some kind of interference between both devices when using the same channel (i.e., when both the 2.4 GHz and 5 GHz channel share the same name).

Cracked android screen about to drive me nuts and verizon isnt helping at all!

I bought this Android about 3 months ago and dropped the phone today and it cracked HUGE across the screen.I hate that! Have this massive hole In the corner and its cracked all across the front....its interfering with texts and stuff.....I called Verizon and they want me to pay $99 to have it replaced! I have insurance....isn't that the point of insurance?is to have it covered in case of a damage? Not just get a discount or pay exactly what I paid when I bought the phone???? I'm so **bleep**.I'd be willing to pay up to $50 for a new one but no more.....I've had Verizon since 2006 I think it was and I'm so mad cause this is the first time yall have tried to do this to me! I might switch to at and t if I can't have it replaced for max $50....... I know its an expensive phone but everyone in my family has Verizon and I've had Verizon forever! All I ask is for it to be. A cheaper phone than 99 dollars since its cracked.....

it's just like ANY insurance. when you go to the doctor you have a deductible to meet or a copay. when you wreck you car you have a deductible to pay. and when you break your phone, you have a deductible to pay. this is why i don't carry insurance on phones. if i break mine i will activate my old one or go on ebay or craigslist and pick up some type of android for $100-200. i don't see a benefit in paying $10/month (or whatever insurance costs) only to have to pay $100 when you need to use it. over a 2 year contract, if you have to use insurance, you nearly pay for a new phone anyway (about $200 in premiums and $100 in deductible). i do feel bad for you, but if verizon has to buy the phone for $400-500, then why should they give it to you for $50? and what if you break it again? should they give you another for $50?
edit: if you (or your parents) have homeowners insurance or auto insurance, then you may want to check into those policies as some of them actually cover lost or broken phones, with no deductible to meet.

My iTunes is creating duplicates of playlists and hanging up. running latest version of lion, and iTunes using match and iCloud. please help. I have uninstalled and reinstalled iTunes. deleted all library files and is doing same thing.

I am runing lion and latest version of itunes. I have match on, home sharing on and using icloud. my itunes started hanging up and required me to force quit. then upon restart of itunes and restart of computer itunes would take upwards of 15 minutes to open and was using >90% of CPU and would be lagging in response if responding at all one of the playlists I had created on my ipad had over a hundred copies of the same playlist. after repeated restarts I uninstaled itunes and reinstalled. this didnt rectify the problem. I assumed library file had somehow become corrupt so I deleted library files, reimported all my music and synced with genius and match. and let the computer go over night. when I woke in morning all my music was back but I had all the extra playlists again and itunes is hogging all the cpu and was minimally responsive and hanging up after each click.
I thought this might be a virus or something but installed ESET cypersecurity did a complet scan with no threats found. I am at a total loss and do not know where to go from here. I hope one of you can assist. Thanks!

I had this exact issue. Spent over an hour on the phone with apple support, they couldn't resolve. Here is what I ended up doing, that worked.
1. Turned iTunes match off on all my iOS devices
2. Deleted the offending playlists from the iOS device they originated on
3. Started iTunes, let it run (literally) for an hour before it became responsive. First thing I did, before clicking anywere else was disable iTunes match. If I clicked anywhere, it would clock for another hour.
4. Let iTunes run overnight, by morning it had cleaned out the repeating play lists. This got my Mac/iTunes back to an operable state.
5. Restore iPhones from backup in iTunes.
What was causing my issue was a single playlist that was created on an iPhone, then suddenly showed up with several thousand duplicates on my other iPhone. The culprit playlist did not, for some reason, duplicate itself on my two iPads. Apple support seemed to think it was because the problem iPhone tried to sync the playlist to iCloud over and over again unsuccessfully, then it finally went through and populated the thousands of blank/failed playlists which then tried to propigate to iTunes and my other iOS devices. Seems like a reasonable theory.
I have not yet re-enabled iTunes match. So, no idea what will happen if I decide to go back down that rabbit hole.

Just purchased a used G4 and need some help

First, let me say, that I am finally returning to the fold after years of working on a PC (employers insisted) but have just purchased a used G4 running OS 10.3.8 I've registered the G4 and everything, and tried to update the OS. I got a "mounting failed" message. It may be because the previous owner left a password in the automatic update file and didn't tell me what it was. Also, they did not provide me with the original installation discs so I could use administrator access to disable this password! Anyway, I want to update the OS as far as it can go - any idea how I can do this? I've searched around the apple site for a while now, seeing if I could purchase replacement installation discs, but can't find any into. If I just go ahead and purchase the 10.4 upgrade, can I install it without upgrading from 10.3.8?
Sorry if these are basic questions, but my last mac was an Apple IIc be kind.

Hello nebpen,
"While the lamp hold out to burn, the vilest sinner may return!"
Welcome back!
As the Texas Mac Man says, you need the install CDs (and Applerescue is a good source). Your DA will run any Apple OS out there at its latest update. I happen to prefer Panther, mostly, I suppose, because it's simpler ... or run them both!
Further, IMHO, the DA is the sweet spot in balancing cost and performance. I'm still feeling my way with upgrades, but every day mine seems to run better. I've just discovered how to adapt an 867mhz QS cpu, so the backup is now running faster than the Main Mac, and I even had to install Tiger (10.4.10) to take advantage of the latest Google Earth. What incredible pictures!
Anyhow, welcome!
Jon

Bought ringtones on my iphone 6 from the itunes store, and they reset to default after 1 day of using them and dissapeared pelase help me get them back

How to get ringtones that have dissapeared after purchased?

This is a known issue and other's have experienced the same thing. It has something to do with iOS 8.1.1. If you didn't sync them to your iTunes library after purchase, you'll need to contact iTunes Support.
https://www.apple.com/support/itunes/contact/

After the new download, I cannot get Firefox to function, open new windows or show me the toolbar I am used to and need. Help!

The above sums it up. Firefox appears in the dock, but even when I ask for a new window to open, nothing happens at all.

Which player? Do you mean Flash, or maybe the Windows Media Player plugin?
* http://www.adobe.com/products/flashplayer/distribution3.html
* https://support.mozilla.org/en-US/kb/play-windows-media-files-in-firefox
You have to run the installers with Firefox closed.

Screen dims on battery use. fn and f10 no help

Similar Messages

Maybe you are looking for