Screen discolouration when black
For about two weeks I have an issue with my screen on my MacBook Pro (2011). When I'm watching a video and the screen is dark, in the centre of the screen I can see blue and white discolouration. If I look closely in the white area, there are black dots present. They are not visible when the screen has something white or bright coloured playing. I haven't tried internet searches, but haven't found any similar problems. I am not computer savvy.
Thanks for any advice/suggestions.
Sorry- * I HAVE tried internet searches
Similar Messages
-
I booted up this morning to find my voice over feature active. A black bar was at the lower left corner of my screen. When I began to click on the users in my login window it would not respond. All that I saw was the black bar saying authentication busy. I was not able to restart, I was not able to switch users, I was not able to shut down. I decided to manually shut down my Mac. when it booted back up I was looking at the disk utility screen. When I clicked on repair or race it indicated that my hard drive had already been arranged. I was looking at completely formatted drive and I was having to either restore from Time Machine or reinstall lion. I had a back up but why did this happen?
A possible workaround could be to have the horizontal scroll bar visible all the time.
<pre><nowiki>body { overflow-x: scroll !important; }</nowiki></pre>
* Stylish: https://addons.mozilla.org/firefox/addon/stylish/ -
I have an issue with my macbook's screen. When I open up my macbook, everything is fine until I tilt my screen back to a comfortable/useable position. If I tilt the screen more than 80 degrees from my keyboard then the whole screen goes dark. It isn't shutting off, but it instantly dim's the screen to the lowest setting (more or less pitch black). If I tilt the screen back towards the keyboard everything is okay again. I'm really just confused. This doesn't happen everytime I use my computer and sometimes I can get away wtih 90 degrees or so, but the problem seems to be getting worse. Not sure what to do and applecare has expired.
JimIt may even be the screen, no way of knowing for sure until you eliminate one potential cause. At least the inverter is cheap.
Directions here: http://www.ifixit.com/Guide/Installing-MacBook-Core-2-Duo-Inverter/1497/1
The part costs ~$5 on eBay.
Search here: http://www.ebay.com/sch/i.html?_nkw=macbook+inverter+-pro&_trkparms=65%253A12%25 7C66%253A2%257C39%253A1%257C72%253A5317&rt=nc&_sticky=1&_trksid=p3286.c0.m14&_so p=15&_sc=1 -
Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks
As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.
-
My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?
Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.
-
I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine
Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W. -
when i upgraded my iphone to the new update My iphone 5 screen went completely black and has been like it for 2 days. I have tried holding home and lock,I have tried holding lock and the volume, and I have tried holding just the volume, it still just stays black.
When i plugged it into my Mac the apple logo comes up on the iphone screen. and then on the computer it says itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes. (as in the below pictures)
when i click ok to restore it just says waiting for iphone (as in the other photo below). i left it in for 20minutes and still said the same thing.
after that i tried unplugging the iphone and it just went back to being a black screen again if anyone has any idea please please help me, thank you.I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings If yu can see the screen enough to do it)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem.
Apple Retail Store - Genius Bar -
When using my iPhone 4s front camera, the screen sometimes become black or have blue stripes on it! Is this a hardware or software problem? Can this issue be covered by my warranty? I bought it inmid-december last year, and this problem came at around Late January. It's a rare case, only came about 5 times, but this really concerns me. What's wrong with it? Thank you so much for your concern.
thank you for your reply
I brought it to the store and they agreed to give me an exchange. thank goodness!
I have a new question: I've now transferred my back up datas to my new iphone. They wanted me to register, so I registered (as my old apple ID) and then they asked if I want to restore backup, I did that too. after the restore back up process, the only things that aren't there were my music and apps! what should I do to get them into my new iPhone? -
When you plug it into the computer, it detects that it's a Cinema HD but the screen is pitch black.
For some reason, the USB and FireWire ports still work.If you shine a really bright light directly into the screen can you then see a faint image on the screen? If so, that would indicate the backlight has died (hardware failure) and the unit needs repairing.
-
My computer had been wanting to do a software update, with what I believe was the Mavericks Software, for a few weeks but I had been putting it off. When I finally decided to install the update onto my Macbook Pro 15" today, my screen went completely black and I haven't been able to get it back since. The computer still turns on, I can tell because my caps lock key still glows when I press it and my volume buttons still make sounds when I press them. However, I cannot see anything on the screen. I don't even get the grey start up screen when I reset my computer. I have tried the SafeMode Restart where you hold Shift while it is restarting and the Display Reset in which you hold Command + Option (alt) + R + P until you hear the start up noise twice, and neither have worked. Any other advice on what I can do to get my screen back without having to send my computer away to be fixed?
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao. -
I have been having an issue with the screen flashing black for several seconds then turning back on. This olny occurs in the Messages app and only in landscape mode. I have never noticed the issue in any other app. The issue is 100% repeatable. Has anyone else had this issue or know of any solutions to what seems to be a bug?
-iPhone 5s running iOS 7.1
KCMI think this is an issue with the phone's proximity sensor (the one that turns the screen off when you hold it up to your ear). It's a bug that seems to occur when you switch to another app (any app) while still on a phone call. You'll notice in Messages that the screen goes dark when you move your thumb over the earpiece/iSight camera, but not when you move your other thumb.
Simplest solution is to force-quit the Messages app (double-click the home button, and swipe up on the app). The problem should resolve itself when you restart Messages. -
Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!
Try this previous discusssion:
https://discussions.apple.com/message/12518406#12518406 -
Running Safari 6.0.3 When trying to print files using Adobe Reader 11.0.02, print preview screen is all black. If files are attached to an email, receiver can't open it. It does work OK in Firefox 19.0.2 Any ideas?
Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
When i am starting the macbook pro, the screen was flashing black and white, and then to color to color, and the whole process repeat all over again, is there any suggestion in solving this, or is there no way to solve this and i need to bring it to the apple support?
My computer Spec:
Macbook pro Version 2011Sounds as if you're having a problem with your GPU (graphics card). Only Apple can diagnose and fix this, so the best thing would be to take your machine into your local Apple Store or an AASP.
Clinton
Maybe you are looking for
-
Hi new to skype, unable to have my first video chat. Message coming up "problem with playback device" grateful if anyone can help. Thanks
-
Images are not displayed in Cp7/SCORM/HTML5
Hello, everyone. I am a Japanese Captivate7 user. Captivate7 is a good authering tool for us. I am belonging to some projects and using this tool. In project-A, we are making a SCORM1.2/HTML5 content incuding 150 pages, many images, many advanced act
-
Is it not possible to import multiple xsd files. If a single file is used there is no problem but when the second import statement is added, it will not compile. It complains that it cannot find one of the element types. Removing the second import it
-
JMS Messaging message.getBody equivalent
I've been using JMS on Glassfish for a while and only just migrated to Weblogic because a consultant suggested this to my boss. The problem is it feels like a step back. I use the method message.getBody(...) to process received message, especially me
-
in ver 3.* I got an Icon (padlock) in the statusbar. Since I have installed ver 4.... it is gone? How I get it back? ....is it necessary for safety internet use (secure websites). Fred54