Screen/Display error

I bought the BlacBerry z3 on 22 November 2014 & in less than 5hrs of use,the screen just went dim and only visible when facing the sun, I wiped it and it started working fine after that,now it keeps doing that when I play music then I have to reboot it & remove the media card(16gb) sometimes it just goes dim for 2-3 days and I have to wipe it in order for it to work.
What could be the problem?

I don't know. But it is curious that it is intermittent. Have you looked at the display brightness settings before and after. Are the settings changing or staying the same? That is, I'm wondering if the settings are changing or being changed.
Also, if you wipe again, try and avoid installing third-party and add-on apps until you test for several days to determine if the problem is going to recur or not. If all is ok, install one app at a time and test.
- Ira

Similar Messages

Curve 8520 screen displays error 552

updated my unlocked curve 8520 and itz displays error 552

Hi and Welcome to the Forums!
Here is a KB that discusses that error:
KB18751Error "Reload Software: 552" is displayed on the BlackBerry smartphone
Hopefully it contains something useful!
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

Display error message as as status message on the screen

Hi all,
How to display error message as as status message on the screen
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it leave the current transaction.
if i display success message and use display like 'E' it display the error message but if i save it save the transaction.
i cannot use leave to screen also because of subscreen. if i use leave to screen system display set screen not allowed in subscreen.
so i want to stop the processing or do not allow the transaction to complete on the message.

Hi
displaying error message like status message will help u?
try the below code
MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
cheers
shibu

How to display error documents in selection screen level

Hi,
Currently Iam doing Smartforms for journal voucher. Iam taking multiple documents as input and displaying relavent item data for each.
Now, my requirement is i want to display invalid document numbers at selection screen level. For example there are 30 invalid document number i want to display them before start-of-selection.
Thanks in advance,
Regards,
Chinna..

i have a query......say i am using a selet-options s_ebeln for ekko-ebeln.
i want to display error messages for
1>lower limit cant be greater than upper limit?
2>for special cahracters given in the select-options fields.....etc...
now when i am writing the code......
if s_ebeln-low gt s_ebeln-high.
message e001.
it is showing SAP's message not mine.
but ....if my s_ebeln-high field is 0.
then my message is showing.
pls give me the codes for these?

Display error message from SLG1 on shopping cart screen

I have implemented a 'BBP_CATALOG_TRANSFER' badi. I am adding all the custom error messages in ET_SC_MESSAGES export parameter of this badi. As a result of this, all the custom error messages added in the above parameter, gets logged in the application log SLG1 automatically and I can see those custom messages in SLG1. Now how to display this message from SLG1 on the shopping cart screen on the top where you normally see standard error messages in red.
Can anyone please help me on this?
Thanks,
Krupa

Hi
Which SRM version are you using ?
I have not tried this... but I think this is not possible to display error messages
using BBP_CATALOG_TRANSFER BADI.
Try to code your logic in using BBP_DOC_CHECK_BADI for filter type - BUS2121 (shopping cart). You need to add your custom message in ET_MESSAGES [] table.
For sample coding, refer to the link below ->
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/bbp_doc_check_badi-CheckPurchasingDocument&
Hope this will definitely help.
Do let me know.
Regards
- Atul

My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my

My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!

Hello jraff21,
I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
The iPhone [device name] could not be restored. An unknown error occurred (4005).
The iPhone [device name] could not be restored. An unknown error occurred (4013).
The iPhone [device name] could not be restored. An unknown error occurred (4014).
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Restore using another USB cable.
Learn more about updating OS X.
Learn more about updating Windows.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
Learn more about other update and restore errors.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Deskjet d1660 displays 'error 4 door open' on screen, but door on printer is closed, how do i fix?

HP Deskjet D1660 displays ' error 4, door open' on screen, but the door on printer is closed. I've tried resetting, opening and reclosing the door, and everything else the website recommends, but to no avail, Help! -using windows vista 32 bit

Hi jenni7694,
Need to have you check the door sensor arm on the door to make sure this is not broken. This is the little piece of plastic i have highlighted Red in my screenshot below.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Please help! printer error- screen displays "C4EB8000" anyone know what is going on?

I have a project due tomorrow and I haven't been able to get my printer to work! It is an HP Photosmart C5550 All-in-One and whenever I turn it on the buttons flash and the screen displays a blue background with a white power sign (the rotated Q or circle with line thing) and below it says "C4EB8000".
Not sure what is going on! I know nothing about computers and printers so anything would help
Thank you so much!
-Grace

Check in System Preferences>Displays if the 'Automatically adjust brightness' is checked.
That may be the reason.
ciao.

How to display error message ??

Hi,
I have a BDC program to upload data from an excel sheet. I could see that some records of data fail to pass and hence after my bdc run i would like to display error message for the failed records as follows:
costcenter:
cost element:
fiscal year:
etc etc
is it possible ?? how to do that ? please explain in detail.
for ur reference my program is pasted below.
thanks
*& Report ZBDC_BUDGET_UPLOAD
REPORT ZBDC_BUDGET_UPLOAD.
types: begin of tdata,
 rec(150) type c,
 end of tdata,
 begin of tmtgp,
 costcent LIKE CCSS-KOSTL,
 costelem LIKE CCSS-KSTAR,
 fisyear LIKE CCSS-GJAHR,
 jan(10),
 feb(10),
 mar(10),
 apr(10),
 may(10),
 jun(10),
 jul(10),
 aug(10),
 sep(10),
 oct(10),
 nov(10),
 dec(10),
 end of tmtgp.
data: idata type table of tdata with header line.
data: imtgp type table of tmtgp with header line.
Data : fieldval(10) type c.
selection-screen begin of block b1 with frame title text-001.
parameters: p_file type localfile default 'C:\budget_data_csv.csv'.
selection-screen end of block b1.
include zbdcrecx1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
 exporting static = 'X'
 changing file_name = p_file.
start-of-selection.
perform upload_data.
loop at imtgp.
Write imtgp-fisyear to fieldval.
perform open_group.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(04)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'KPP0B-VALUE(04)'
 fieldval.
Write imtgp-costcent to fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(06)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'KPP0B-VALUE(06)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(09)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-costelem to fieldval.
perform bdc_field using 'KPP0B-VALUE(09)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(04)'.
perform bdc_field using 'BDC_OKCODE'
 '=CSPB'.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(01)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jan to fieldval.
perform bdc_field using 'Z-BDC03(01)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(02)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-feb to fieldval.
perform bdc_field using 'Z-BDC03(02)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(03)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-mar to fieldval.
perform bdc_field using 'Z-BDC03(03)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(04)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-apr to fieldval.
perform bdc_field using 'Z-BDC03(04)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(05)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-may to fieldval.
perform bdc_field using 'Z-BDC03(05)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(06)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jun to fieldval.
perform bdc_field using 'Z-BDC03(06)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(07)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jul to fieldval.
perform bdc_field using 'Z-BDC03(07)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(08)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-aug to fieldval.
perform bdc_field using 'Z-BDC03(08)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(09)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-sep to fieldval.
perform bdc_field using 'Z-BDC03(09)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(10)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-oct to fieldval.
perform bdc_field using 'Z-BDC03(10)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(11)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-nov to fieldval.
perform bdc_field using 'Z-BDC03(11)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(12)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-dec to fieldval.
perform bdc_field using 'Z-BDC03(12)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(12)'.
perform bdc_field using 'BDC_OKCODE'
 '=CBUC'.
perform bdc_transaction using 'KP06'.
perform close_group.
endloop.
form upload_data.
data: filename type string.
clear idata.
refresh idata.
filename = p_file.
call function 'GUI_UPLOAD'
 exporting filename = filename
 filetype = 'ASC'
 tables data_tab = idata
 exceptions file_open_error = 1
 file_read_error = 2
 no_authority = 6
 others = 17.
 check sy-subrc = 0.
 loop at idata.
 clear imtgp.
 split idata at ',' into imtgp-costcent imtgp-costelem imtgp-fisyear
imtgp-jan imtgp-feb imtgp-mar imtgp-apr imtgp-may imtgp-jun imtgp-jul
imtgp-aug imtgp-sep imtgp-oct imtgp-nov imtgp-dec.
 append imtgp.
 endloop.
endform.

check the below code,.,
DATA : t_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
CALL TRANSACTION '<DELIVERYTRANSACTION>' USING t_bdctab
 mode 'N'
 MESSAGES INTO t_bdcmsgcoll.
DESCRIBE TABLE t_bdcmsgcoll LINES g_lines.
READ TABLE t_bdcmsgcoll INDEX g_lines.
IF t_bdcmsgcoll-msgtyp = 'S' AND
 t_bdcmsgcoll-msgid = <Msg id> AND
 t_bdcmsgcoll-msgnr = <Msg number>.
* Trap your Call Transaction messages
 t_success-deliverynumber = t_bdcmsgcoll-msgv1.
* You can format the message returned by call transaction using function 'FORMAT_MESSAGE' which will return g_mesg
 t_success-message = g_mesg.
 APPEND t_success.
 CLEAR t_success.
ELSE.
* If there an Error-Do this..
 READ TABLE t_bdcmsgcoll WITH KEY msgtyp = 'E'.
 IF sy-subrc = 0.
* Format your message using FORMAT_MESSAGE "FM
 CLEAR g_mesg.
 t_error-msg = g_mesg_incl.
 APPEND t_error.
 CLEAR t_error.
 ENDIF.
ENDIF.
* Clear for next run
CLEAR: t_bdcmsgcoll,
 t_bdctab.
REFRESH: t_bdcmsgcoll[],
 t_bdctab[].

Prb display error message while creating PR at ME51n in ME_PROCESS_REQ_CUST

Hi All,
I have this requirement to check the cost center availability in PR screen (ME51n).
If cost center in the Account assignment tab is not empty, display error message and not able to create the PR.
With my code below, it doesn't triggered the error message and PR created.
Could anyone help?
METHOD if_ex_me_process_req_cust~process_account.
DATA: w_account_ref TYPE exkn.
w_account_ref = im_account_ref->get_data( )
IF w_account_ref-kostl IS NOT INITIAL.
MESSAGE e303(ME) WITH text-001 w_account_ref-kostl text-002.
ENDIF.
ENDMETHOD.
Thank you.
SW

Hi,
You have to use definition MMPUR_MESSAGE 'E' ME 303 text-001 w_account_ref-kostl text-002.
This will throw the error during check and save instead of message e303(me) .
Hope it helps.
Sujay
Edited by: Sujay Venkateswaran Krishnakumar on Oct 5, 2010 2:54 PM

BDC display Error while converting the Currency ..

Hi,
Using BDC i have to cal Transaction Vk15.
In this we have a field KONP-kbetr, which is a currency feild, with 2 decimals.
I have to converted the Currency to 'EUR' and has moved it in a variable "gv_char13".
______________+declaration part+_____________________
Data : gv_eurconv_vk(14) TYPE rkb1k-exchr,
 gv_eurconv_vk TYPE konp-kbetr,
 gv_char13(14) TYPE c.
_____________+Currency Conversion+________________
CALL FUNCTION 'RKC_SINGLE_EXCHANGE_RATE_GET'
 EXPORTING
 datum = gv_sydatum
 kurst = 'P'
 ncurr = 'EUR'
 vcurr = 'CZK'
IMPORTING
 exchr = gv_exchr_vk
 EXCEPTIONS
 no_rate_found = 1
 OTHERS = 2
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
WRITE gv_exchr_vk NO-GROUPING CURRENCY 'EUR'.
MOVE gv_exchr_vk TO gv_eurconv_vk.
CLEAR gv_char13.
WRITE gv_eurconv_vk TO gv_char13.
_________+Passing Value IN BDC VK15+__________
 wa_bdcdata_vk-fnam = 'KONP-KBETR(01)'.
 wa_bdcdata_vk-fval = gv_char13.
 SHIFT wa_bdcdata_vk-fval LEFT DELETING LEADING space.
 APPEND wa_bdcdata_vk TO gt_bdcdata_vk.
 CLEAR wa_bdcdata_vk.
----------+Calling the Transaction VK15+____
CALL TRANSACTION 'VK15' USING gt_bdcdata_vk MODE 'E' MESSAGES INTO gt_bdcmsg_vk.
**--Display the error message if the call transaction fails--**
 IF sy-subrc EQ 0.
 IF NOT gt_bdcmsg_vk IS INITIAL.
 READ TABLE gt_bdcmsg_vk INTO wa_bdcmsg_vk INDEX sy-index.
 CALL FUNCTION 'FORMAT_MESSAGE'
 EXPORTING
 id = wa_bdcmsg_vk-msgid
 lang = 'EN'
 no = wa_bdcmsg_vk-msgnr
 v1 = wa_bdcmsg_vk-msgv1
 v2 = wa_bdcmsg_vk-msgv2
 v3 = wa_bdcmsg_vk-msgv3
 v4 = wa_bdcmsg_vk-msgv4
 IMPORTING
 msg = gv_text_vk
 EXCEPTIONS
 OTHERS = 0.
 IF sy-subrc EQ 0.
 APPEND gv_text_vk TO gt_mess_vk.
 ENDIF.
 ENDIF.
 ENDIF.
ENDLOOP.
**--Display the error message on the screen--**
IF NOT gt_mess_vk[] IS INITIAL.
 LOOP AT gt_mess_vk INTO wa_mess_vk.
 WRITE:/ wa_mess_vk.
 CLEAR wa_mess_vk.
 ENDLOOP.
ENDIF.
In the dispaly tabkle for error message "gt_bdcmsg_vk" we get the sucess message and in table "gt_mess_vk" we get the message as the "Condition records Saved."
The problem is when this report is executed it displayes the converted currency Value and in next line it dispalyes the ""Condition records Saved".
But idealy the converted currency value should not be dispalyed.
Actual Sample display:(shuld be this ):
xyz.. message
Condition Record Saved.
Sample display (Error Dispaly ):
xyz.. message
3,14E-02 -
(This shuold not be dispalyed)
Condition Record Saved.

Use modified code...
*______________declaration part_____________________
Data : gv_eurconv_vk(14) TYPE rkb1k-exchr,
 gv_eurconv_vk TYPE konp-kbetr,
 gv_eurconv_vk TYPE p DECIMALS 2,
 gv_char13(14) TYPE c.
*_____________Currency Conversion________________
CALL FUNCTION 'RKC_SINGLE_EXCHANGE_RATE_GET'
 EXPORTING
 datum = gv_sydatum
 kurst = 'P'
 ncurr = 'EUR'
 vcurr = 'CZK'
IMPORTING
 exchr = gv_exchr_vk
 EXCEPTIONS
 no_rate_found = 1
 OTHERS = 2
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
WRITE gv_exchr_vk NO-GROUPING CURRENCY 'EUR'.
MOVE gv_exchr_vk TO gv_eurconv_vk.
gv_eurconv_vk = gv_exchr_vk.
CLEAR gv_char13.
WRITE gv_eurconv_vk TO gv_char13.
*_________Passing Value IN BDC VK15__________
 wa_bdcdata_vk-fnam = 'KONP-KBETR(01)'.
 wa_bdcdata_vk-fval = gv_char13.
 SHIFT wa_bdcdata_vk-fval LEFT DELETING LEADING space.
 APPEND wa_bdcdata_vk TO gt_bdcdata_vk.
 CLEAR wa_bdcdata_vk.
Calling the Transaction VK15____
CALL TRANSACTION 'VK15' USING gt_bdcdata_vk MODE 'E' MESSAGES INTO gt_bdcmsg_vk.
*Display the error message if the call transaction fails*
 IF sy-subrc EQ 0.
 IF NOT gt_bdcmsg_vk IS INITIAL.
 READ TABLE gt_bdcmsg_vk INTO wa_bdcmsg_vk INDEX sy-index.
 CALL FUNCTION 'FORMAT_MESSAGE'
 EXPORTING
 id = wa_bdcmsg_vk-msgid
 lang = 'EN'
 no = wa_bdcmsg_vk-msgnr
 v1 = wa_bdcmsg_vk-msgv1
 v2 = wa_bdcmsg_vk-msgv2
 v3 = wa_bdcmsg_vk-msgv3
 v4 = wa_bdcmsg_vk-msgv4
 IMPORTING
 msg = gv_text_vk
 EXCEPTIONS
 OTHERS = 0.
 IF sy-subrc EQ 0.
 APPEND gv_text_vk TO gt_mess_vk.
 ENDIF.
 ENDIF.
 ENDIF.
ENDLOOP.
*Display the error message on the screen*
IF NOT gt_mess_vk[] IS INITIAL.
 LOOP AT gt_mess_vk INTO wa_mess_vk.
 WRITE:/ wa_mess_vk.
 CLEAR wa_mess_vk.
 ENDLOOP.
ENDIF.

How to display error message in abap

How to dispaly error message in report?
i have to check the range bewteen two days and if it is not in range have to display error message only once.
next time if i press the execute button report will get executed without showing the warning message.
i am calculating the days between two dates, i am displaying the error message but if i press the execute button i will not allow me to execute the report.it again shows me the error message.i have to skip this in 2nd time.
can any one suggest what to do with this?

hello suman,
i am using select-option in my report. And i have to check the difference between two dates in select option input box( low-value and high-value). if it is greater then suppose 10 then i have to display warning message at once and then if click on execute button , the report should get executed without showing any warning messages in report.
here i am attaching my source code.please take a close look and tell me where should i have to make change.
SELECT-OPTIONS :s_bedat FOR ekko-bedat.
AT SELECTION-SCREEN ON s_bedat.
IF NOT s_bedat IS INITIAL.
 PERFORM bedat_validate. " Perform for Purchasing Document Date Validation
ENDIF.
FORM bedat_validate . " Form for Purchasing Document Date Validation
DATA : diffr TYPE i.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
 EXPORTING
 i_datum_bis = s_bedat-high
 i_datum_von = s_bedat-low
I_KZ_EXCL_VON = '0'
I_KZ_INCL_BIS = '0'
I_KZ_ULT_BIS = ' '
I_KZ_ULT_VON = ' '
I_STGMETH = '0'
I_SZBMETH = '1'
 IMPORTING
 e_tage = diffr
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
 IF diffr GT 31.
 MESSAGE s009(zerrormsg) WITH text-000 DISPLAY LIKE 'W'.
 LEAVE TO LIST-PROCESSING.
 ENDIF.
ENDIF.
ENDFORM. " BEDAT_VALIDATE

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

Display error message in EXIT_SAPLMRMP_010

Dear expert,
Our requirment is that:
We want to display a modal dialog screen for user input some other detail data when click 'Post' in MIRO, and update these data to a an add-on table. There will be a 'CHECK' button on the dialog box for checking the data which user input.
We found the customer function EXIT_SAPLMRMP_010 can do the job. we create our dialog screen, and call it in EXIT_SAPLMRMP_010.
We write some code like " MESSAGE 'xx is a required field' type 'E' '' in PAI modoule of dialog screen.
but when the program reach the code 'Message XX', no any error message pop-up, the modal dialog screen automatically closed and back to MIRO screen. the error message can be found when click button 'MESSAGE' on MIRO screen.
it seems that the sytem prevent the error messages raised, and collect them into the "message box" of MIRO screen.
But the we want to display the error message directly in the dialog window or pop-up the message without dialog window close.
is there any one how to do that?
thanks very much

Hi,
have a look at this thread:
BADI or Userexit for MIRO and FB60 for displaying an error message
You can try something with fm 'MRM_PROT_FILL'.
In this way the "messages" button of the status bar will show a red traffic light indicating that you have error messages.
Best regards.
Edited by: Pablo Casamayor on Aug 19, 2009 8:35 AM

Screen/Display error

Similar Messages

Maybe you are looking for