Screen display problems, LCD?

I bought an iPhone 5 six months ago from Roger's Wireless and I also paid for the application of a screen protector, for a long time both of these worked very well and I had no problems. The other day I put my iPhone into my locker at work and came back a few hours later to find that two spots had appeared on the display. One was near the top of the screen and it looked like a dis-colored splotch while the other one, that was near the bottom of the screen, looked like someone tried to scratch the screen with a dull object . When I turn off the display and examined the outside of the phone there is no scratches or any other physical damage to the phone, I think it may have something to do with the LCD screen. Also, my locker was locked so I know no one was fooling around with it although humidity or something could have played a factor but I'm not entirely sure. The spots are relatively small but pretty annoying, before this my iPhone was in perfect shape . I'm not sure if I am covered by the one year warranty because my phone may have water damage (although I am not sure). I remember a few months back dropping it into a deep pile of snow and when I took it out it was pretty wet, but still continuted to work perfectly find. Regardless, I'm pretty sure thats accident caused the water damage indicators in my phone to be set off . I looked all over the internet and there is different ways of taking off the actual LCD screen and replacing it yourself but I think I would much rather get this done by a professional. I have also heard that the spots may go away eventually. I am not sure if I am going to send my phone in right away but any help at all would be awesome. Thanks!

Do not attempt to work on your iPhone yourself, doing so will result in Apple refusing all further support for you.  Take the iPhone to an Apple store genius bar or Authorized Service Provider for evaluation.  Water damage will result in an out-of-warranty status...replacement will be $229 in the US for an iPhone 5.

Similar Messages

  • Screen/display problem

    I have a problem with my screen/display on a four year old Macbook Pro running OS 10.6.8.   Sometimes it goes black but isn't really asleep, just very dark, but I can't wake it up or brighten it. I have to force it to restart.  It also  gets vertical light patches in the screen, which I can reset using keystrokes, but it still recurs sometimes.   This is starting to happen more often.   Any ideas what the problem might be?

    Could be LED board has a bad back light, logic board is on the way out.  Take it to an Apple store, they have a flat repair rate, it's worth a trip ,as they do a diagnostic for free.  I had the same issue and they repaired a bunch of stuff for the flat rate, which is about 1/3rd of the cost of the cheapest MBP.

  • Screen display problem with Lenovo 3000 N100

    Hi,
    My Lenovo laptop is having a problem with screen display. When i boot the laptop (keeping the screen at 90 degrees to the key board) , there is no display . However, when i tilt it down (lesser than 45 degrees) the display comes back to normal.
    In addition, the mystery is that this doesnt happen if do the same after 5 minutes. No matter at what position i have the screen, it works perfect!
    Is there a solution for this ? Can some one explain why the display is normal after warming up, but not in the begining (booting) stage.
    Senthil.

    Lose / pinched  wires possibly.
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-63486upper
    I had to re-seat mine , and I still have to wiggle the upper right corner .
    A common issue I here,although I just purchased a second used N100 and the screen has no issures.

  • Screen display problem with Ubuntu on SL400

    I just installed Ubuntu latest release 9.04 and having problems witht he screen display. The display does not use the entire screen width. I am losing about one inch and each side. (Note that at times, the display is just right). I tried fixing it using the Display option in System but with not much succes. Any idea how I could resolve this?
    Here the output from running lspci in the terminal:
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
    02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
    0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
    0d:00.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    0d:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    0d:00.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
    0d:00.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    0d:00.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
    Thanks,
    Mathieu

    Look:
    http://forums.lenovo.com/t5/Linux-Discussion/SL400-running-Ubuntu-Linux/m-p/55236/page/6
    and
    https://lists.ubuntu.com/archives/universe-bugs/2009-April/081223.html
    https://lists.ubuntu.com/archives/universe-bugs/2009-May/088989.html

  • Is there a way to fix ipod touch screen display problem with song list?

    I was wondering if anybody has had this problem? I have an ipod touch 64gig 5th gen for probably about 2 years. I hardly use it because I have it as a back up ipod until primary one dies. This is the first time I came across this problem. Upon turning on device, the first artist/song list I choose displays correctly. Once I start choosing any other artist/song list afterwards, the display for the 1st artist/song list re-appears. If the song list is only a single song to 3-4 songs it will display correctly. Any other song list I choose that consist more than 5 songs, the first artist/song list re-appears on screen like the display is messed up.
    For example: Upon turning on device, I choose Aaliyah with a list of 9 songs displaying.
    Upon trying to select a different artist and song, for example I choose Nachtmar with a  list of 20 songs.
    The Aaliyah with the list of 9 songs re appears in place of the song list I am attempting to choose. The songs play and it works, but the display is incorrect. Why is it doing this? Does anybody have this problem? I have tried resetting and it has currently been updated. I have came across this problem just very recently a couple of days ago. I have had a couple of hard resets requiring to erase all data in the past and I don't want to go that way again because I have about 3,500 songs. I have never experience this problem before in the past. I just want it to display the current list of songs. It's inconvenient having to type in every song while playing in the car instead of being able to easily pick an individual song.

    I have this problem too and it drives me crazy. When I view my ipod, I don't want to see a list of the first 8 songs in my ipod library. I just want to see the current song playing. It's like the ipod display goes into some type of "sleep" mode while your music plays,and the display defaults to show the first few songs in your ipod touch library, even though none of those songs are currently being played. I have to take the time to either flip the ipod over a couple of times in order for that list to disappear just to see the current song playing.
    This is an example of what I see on my display after the current song begins playing. These are the first songs in my ipod library. To get rid of this view, I have to either shake the ipod or flip it over a couple of times and the current song is now displayed, allowing you to see the current song, also allowing you access to the arrows to either fast forward or playback/reverse. On the display, the songs are in a grid or table format (unable to show that here).
    Acoustic Soul
    Aaliyah
    Adventers on the Wheels
    Adventures in Paradise
    After Tonight
    Will Downing

  • FULL SCREEN DISPLAY problema

    Hello everybody!
    I've written my first code for J2ME MIDP. I'm learning about paint method of Canvas class.
    I put below code in the paint method:
    g.drawString("Width: "+Integer.toString(getwidth()),0,0,Graphics.TOP|Graphics.LEFT);
    g.drawString("Width: "+Integer.toString(getheight()),0,0,Graphics.TOP|Graphics.LEFT);
    g.drawArc........ etc...
    When I ran that application on my SE K700i, I can see the information of the width and height of the display screen, that is "W=176 H=176".
    But when I ran it on my brother's Nokia 3660, I got "W=176" and "H=144".
    Last, I ran it on my sister's Nokia 6610, I got only "W=128" and "H=96".
    My questions are:
    - Can I set it to a defined size, so when we ran it on any types of devices, we get the same size of display screen?
    - There is a panel on top of the screen that show the battery and signal indicators, and one on bottom of the screen for command action. Can I set the application ran FULL SCREEN (no any panels)?
    Thanks very much for any reply!

    Hi,
    There are no standard methods available for scaling images.
    But, when you are using TiledLayers and moving Sprites, then you just can keep the images the same. On a phone that has a large screen, you just 'see' more of the game. When you're using a phone that has a smaller screen, then you just 'see' less of the game screen.
    There are tutorials and other documents available on the web describing the creation of games using TiledLayer, Sprite and GameCanvas.
    But, don't use (create) images that are as large as your screen. It will cause an attack on your device's heap memory and it will introduce inconvenient problems when running the game on different devices with different screensizes...
    Good luck!
    Cheers,
    Jasper

  • Screen Display Problem in Windows 7 OS

    Hello Gurus,
        I have a scenario for creating sub screen area in sales order 'Additional data B' tab.I created screen and its working fine.But problem is if open sales order in Windows XP system its displaying screen properly,but if i open same thing in windows 7 screen is not showing screen completely. Sub screen is displaying only 70%. I thought it is issue on SAP GUI side.But am not able to find a solution.Please help to solve this issue.
    Thanks,
    Chittoor.

    Hello.
    As Miguel mentioned, it might be because of different screen resolutions.
    I feel this is one of the drawbacks in SAP screen developments. There is no way we can develop a screen that looks uniform across all screen resolutions which is possible with web application programming.
    I would suggest you to develop the screen in a resolution that is most common across PCs and layout various screen elements from the left end of the screen.

  • HT201257 Screen/ Display Problems- maybe hardware related?

    Has anyone experienced a problem with their display- where an open window repeats over and over the entire screen (sometimes appearing like random squares) and the only way to correct the display seems to be by opening finder and dragging it across the screen? This often occurs when using CS5 inDesign.
    Does anyone have a solution/ diagnosis?
    Thanks in advance!

    That sort of problem correlates with a graphics Hardware problem.
    It is possible that if your graphics card is clogged with dust, blowing out the dust and allowing it to stay cool will resolve the problem, but I would not get my hopes up.
    The Apple 5770 works in all Mac Pro models, about US$250. Do not buy a non-Apple version, as it will not show a picture under Mac OS X.
    http://store.apple.com/us/product/MC742ZM/A/ati-radeon-hd-5770-graphics-upgrade- kit-for-mac-pro-(mid-2010)?fnode=53
    http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html

  • Screen/display problems

    I have a xMII web page (irpt) that will sometimes cause the display/screen to go crazy (don't know how else to describe) - no way to recover besides killing the browser window via the task manager.  Not sure if it is an xMII problem or if a problem with my html???  The page that this happens on has ~10 applets in 10 different divs that are not displayed until a user clicks on the appropriate checkbox to refresh and display.  Has anybody seen something like this?

    Hi Sam,
    I have seen issues in the past when applets are placed within div tags, especially if the the height and width are expressed as a percentage as opposed to defining the height and width in another measurement such as pixels (see the xMII Best Practices Guide on the xMII Wiki).
    You could also consider an alternative technique - the iframe - which I have had better success using to hide and show applets.
    Kind Regards,
    Diana Hoppe

  • Ipad black Screen display problem?

    Having a problem today. My iPad fell off my desk (with its case on) and when I picked it up & tried to unlock it i was completely black. I connected it to itunes and did a reset but it's still black it actually talks now and any kind of display or the apple logo appears very briefly (like a second or less) but disappears ?

    You could always try the general steps of restarting, resetting, and then trying to restore but Im thinking that this is most likely a hardware issue so you'd be better off visiting an Apple Store first to see what a Genius rep thinks it could be.
    You can make appointments here: http://www.apple.com/retail/

  • EMac desktop is larger than the screen / display ????? Help

    My oldest mac, an eMac 1 Ghz G4, 640 mb SDRAM, running 10.4.11 has had a screen display problem for months now. The graphics card is ATI Radeon 7500 (CRT - 1280 x 960 @ 72 Hz, 32 bit, no core image supported). It is over 7 years old.
    The desktop is larger than the screen, so it is a hassle to constantly have to move the desktop around.
    I'm not sure what it started after.
    I have tried changing all the display resolutions, colors and freq to no avail. I also re-calibrated the screen without change. Updates to 10.4 have not changed it.
    Is the graphics cards failing ?? There is no distortion or lines on the screen. The kids can still play games on it fine.
    ANY thoughts ??

    This is a real long shot, but is Zoom by chance turned on in the Universal system preference? If so, turn that off and see if that makes a difference.
    If not, you can try resetting PRAM (restart the system and hold down the p, r, command and option keys until the system gives its startup chime a second time) and see if that does anything useful.
    If neither of those possibilities help, I'll have one other suggestion, so post back and let us know.
    Regards.

  • Brand new mac mini and Studio Display 17" LCD- 2 adapters needed- problems?

    From many forum posts here and elsewhere it seems I can in fact hook up my Studio Display 17" LCD monitor if I used the ADC-DVI adapter. But has anyone used the ADC-DVI adapter AND the DVI-mini DVI adapter that came in the box with the Mac mini?
    Apple tech support told me on the phone tonight that doing so would "fry" the Studio Display.
    Has anyone had any problems using this? Will running it through 2 adapters cause problems as opposed to the older minis where you could just do ADC-DVI and then into the computer?

    Were you able to get your display working? I have an LG 27" at home connected to a Mid 2012 (June) MacBook Air 13" that has absolutely no issues. However, I just obtained the same Samsung monitor you have and appear to be having the same issue.
    The only solution that I have found is to unplug the power from the back of the monitor or at the power supply each time my computer either wakes from sleep, screensaver, or a display that is powered off. This seems to be true via the following connections:
    1. HDMI to DVI thunderbolt adapter
    2. HDMI to Thunderbolt adapter
    The display powers on with a slight flicker and then will immediately stop displaying the image on screen. What's especially strange here is the MacBook Air still believes the display is connected -- my login screen or active apps that are displayed on the external monitor do not move to the MacBook Air display as if it's no longer connected.
    I hope someone has a solution to this issue! Thanks!

  • I have a slight crack in my mac book pro screen it is just on the top of the screen and the LCD display is working fine. i was wondering how much it would cost to fix it/ replace it.

    i have a slight crack in my mac book pro screen it is just on the top of the screen and the LCD display is working fine. i was wondering how much it would cost to fix it/ replace it. it is not a pressing matter but if it is cheep to fix then i would like to do so

    Most of us wouldn't know that here. Call your Apple Store.

  • [X300 intel external display] Problem to display correctly 1600x1200px on external screen

    Hello everyone,
    I have a problem with my external display on my X300 laptop...
    I have a X300 with WinXP, and a 20" 4/3 1600x1200 external display (Samsung 204B).
    When I want to use my external display as an extended desktop, it didn't work well... First I configure my display as an extended ... into 1600x1200px resolution. As the ratio isn't 4/3 on the laptop, there is some border at the top and at the bottom of the external screen, consequenly there is an "lift" (when I go down the screen move down.. etc.). It's not very ..cool.
    So there is an option into the graphic proprety to set the screen in "full screen : not keeping the proportions". But, in this case, my external screen display an ... triky ? There is still an "lift", but there is also two border on the right and the left of the screen, and the image quality isn't there. It's too deformed to can be read.
    After some research it appear that my lenovo drivers do not match with the last intel one... But when I try to install the lenovo one ... It didn't work ! (hardware problem).
    How can I get a working extended desktop into 1440x900 + 1600x1200 full screen !
    Thanks for all, and sorry for my poor English...

    i have the same problem with X200 and the X200 ultrabay Docking station.
    No idea yet ...

  • Insignia 26" LCD TV/DVD Combo display problem

    My Insignia 26" LCD TV/DVD Combo has a display problem when you turn it on it is very bright, changes to verticle stripes after about 10 minutes of "warm up" you begin to see a egraded picture and after a little more warm-up the picture finally comes through clear.  I am past my warrenty period but I would like to fix the TV rather than throw it away.
    1) can someone tell me what the problem is
    2) identify the part that needs replacment and the cost
    3) estimate repair cost if I brought it in to be fixed
    Thank you

    Try setting the input to antenna and then scanning. If that doesn't work, you will need to get a tuner box.

Maybe you are looking for