Screen display to big to read, please help

somehow my display got expanded, now cant read anything on it and cant get it to go back to normal

Settings>General>Accessibility>Zoom>Off

Similar Messages

Desktop display too big to read. Help!

My friend has a G5. Her baby played with the keyboard and touched some keys and now her desktop image is huge, she can see only one word in the whole desktop. What happend? how does she fix that?
Any feedback? Thanks!!

Press the Command, Option, and - keys to make the screen smaller, and repeat as necessary. This happens because the zoom in feature has been activated.
(12931)

Blue screen 109 error, mini dump attached, please help

Hi Experts,
I am frequently getting blue screen error in my laptop. Please help. The link to minidump file is given below. I am using Windows 7 ultimate operating system.
I have tried a lot of things to avoid this dump but it keep recurring.
https://onedrive.live.com/redir?resid=49561AD592663106!107&authkey=!AFI9kcFyy6ncfJ8&ithint=file%2c.dmp
regards,
Ayaz

AA
This one DMP file was inconclusive please run driver verifier to find the underlying cause
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Since it is more likely to be a driver please run verifier first.
1-Driver verifier (for complete directions see our wiki here)
2-Memtest. (You can read more about running memtest here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Hello, I have a MacBook pro retina 13" early 2013, and i am not sure if I can use a 4k2k display Monitor with my Macbook, please help!

Hello, I have a MacBook pro retina 13" early 2013, 2,6 GHz Intel Core i5 and Intel HD Graphics 4000 1024MB,
and i am not sure if I can use a 4k2k display Monitor with my Macbook, please help!

Hello, Righten.
Thank you for visiting Apple Support Communities.
I understand that you want to know if your MacBook Pro will support a 4k display. Here is an article that will answer your question.
Using 4K displays and Ultra HD TVs with your Mac
Cheers,
Jason H.

My ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me

my ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me

- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again.

I cracked my iPod screen..how much would it cost to replace the screen? The iPod works perfectly still, but the screen pieces are falling off. Please help!

I cracked my iPod touch screen...how much would it cost to replace the screen? The iPod works perfectly, but the pieces of the screen are chipped and cracked. Please help!

Contact Apple or a third party repair center and ask.

My iphone volume turns down randomly own its own. It will turn up on the buttons, but will turn back down by itself and i have to fight the volume to keep it from muting. Plus, the mute logo stays on the screen when it mutes itself. Please help.

My iphone volume turns down randomly own its own. It will turn up on the buttons, but will turn back down by itself and i have to fight the volume to keep it from muting. Plus, the mute logo stays on the screen when it mutes itself. Please help.

Unfortunately this is probably a hardware issue and you will need to take it to an Apple Store.

Display/Screen Glitches on Lumia 530! Please help

Hello team,
I had purchased Lumia 530 last week and until today morning (24th Aug), I see white lines/dangling display all over!
I'm surprised over the glitches and I havent installed/deleted any app.. White lines are evident below the navigation bar too (below the back arrow and windows key). Please find the images below.
It seems to be a handset problem.. Please help me.
Attachments:
IMG_20140824_214651.jpg ‏307 KB
IMG_20140824_214724.jpg ‏254 KB
IMG_20140824_214553.jpg ‏355 KB

Thanks for the response. I had purchased it online and would go to nearest Nokia Support Center in the coming days..
jimmyireland wrote:
I have similar on my 530 but does not seem to be as thick as yours seems to be offset a liitle from where the screen ends and placement of the on screen keys.
I would go back to where you bought it and compare it with another if its possible.

CAN'T SCREEN SHARE! TRIED EVERYTHING! PLEASE HELP!

My girlfriend just got a new Macbook and I've been helping her set it up across campus though our network at my university. It worked fine and then one day it didn't. Every time she asks or I ask to share her screen it gives this error to both of us:
"Failed to start Screen Sharing because: Screen sharing could not be established."
I've been reading discussions on how to fix this for 2 weeks now and nothing has seemed to work. What is weird though is that I can screen share PERFECTLY with my Uncle who lives in Wisconsin (I am in Arkansas) from campus. However, I can't seem to connect to my girlfriend's computer who is simply just a few buildings away.
The following is what we've tried:
1. Switch from wired to wireless network
2. *Set "System Prefs>Quicktime>Streaming" to "1.5 Mbps T1/Intranet/LAN"
3. *Set "iChat Prefs>Audio/Video>Bandwidth Limit to both "500" and "None"
4. *Both computers have a firewall set to "Allow all incoming connections"
5. *When #4 didn't work we set firewall to "Set access for specific services and applications > iChat.app set to "Allow incoming connections"
6. Rebooted both Macs
7. Deleted all com.apple.iChat.X.plist files and started over fresh
8. *Enabled "Screen Sharing" in System Prefs>Sharing
*Restarted iChat afterwards
I think that's all. It is just really frustrating because I can screen share with someone clear across the nation but not someone who is on my same network. The only difference is that she is using a Gmail account through AOL and I am using a @me.com address. I thought maybe Gmail wasn't working so I had her switch to an AOL account and still same error.
We cannot port forward for obvious reasons at school but it worked before and nothing on the firewall has changed. I work at the IT department at our university and spoke with the person who runs the Firewall and supposedly there are no blocked ports on the part of the network we use. I know with iChat 4 in Leopard it doesn't use a specific port, it bounces around until it finds one according to article regarding port forwarding and NAT routers and iChat.
The weird part is that when we are both off campus (different houses) and try it, Screen Sharing tries to start, she gets the big words across her screen ("Screen Sharing Started" I think...) and we can hear about 5 seconds of audio and then it errors out again. I really want to get this working can someone please tell me how? This is really frustrating.
Thanks,
-jg

Hi,
First off from reading this it should be an AIM valid name (@mac.com, AIM or @me.com) to AIM valid name or
a Jabber valid name (which includes Googletalk valid Gmail IDs) to another Jabber valid name
(that is both should be using the same type of Buddy list)
As you say the Apple Doc on this is not clear on the Screen Sharing part - listing only the changes to the AV ports compared to the Previous Doc (Now article HT1507). It does not mention the Screen Sharing at all.
Reading around suggests the Screen Sharing is based on Apple Remote Desktop and reading the com.apple.ichatAgent.plist with QuickLook shows a reference to a ARD link/process. (the same can be seen if you install Developers Tools from the Install disk which will give you Property List Editor which will open the .plist files).
The Article TS16929 (Previously Doc 106439 shows that Apple Remote Desktop uses port 5900 and 5988.
Having said that though I run Little Snitch, an application that monitors and reports which IPs and Ports and application is trying to use. This shows me a completely random port in the 15xxx range along side the AV port 16402 for the Audio component. It maybe that Apple Remote Desktop also moves to a random port after it has established a connection.
Most people fail on the Audio part and get the standard Log Pop up screen to send or not to Apple - BUT you clearly have the other message...
"Failed to start Screen Sharing because: Screen sharing could not be established."
.... which is unrelated to the Audio part.
This would clearly put things in to the realms of a firewall or setting issue with possibly modem/router or LAN features getting in the way. (Leaving aside ISP related things for the moment).
You say iChat is in the Allowed Specifics List in the Leopard Firewall.
You say that nothing has changed on the Campus Firewall and can connect Off-site form On-site so it would seem not to be there.
On this last issue, check if they have introduced a Streaming cap on Intra-Site links. They may be trying to prevent other things such as Peer-to-Peer File Sharing or thing like everyone sharing their iTunes Libraries and other similar activities. The ability to Share Optical Drives re MacBook Airs maybe a factor.
I would tend to look towards your girlfriend's Mac.
Since iChat 2 it seems that some failed chats seem to hold on to ports or have some hold over the Network going on.
It seems most common when in System Preferences > Network the drop down at the top listing "Location" is left at the Automatic Default.
There are essentially two fixes for this.
1) Set up another Location and copy the settings across and switch between the two to force the Network to re-establish itself.
2)A longer way of clearing what is going on.
a) Shut any Airport card down if using WiFi
b) Shut down the computer.
c) Disconnect any Ethernet cable from either Computer or routing device (whichever is easier to reach but leave the routing device still connected to the Internet - just isolate the computer from the Internet)
d) Restart the computer (this is with no Internet Connection)
e) Restart iChat.
f) Restart Airport card or plug in Ethernet cable.
g) Using the Buddy List, select Available and make iChat Login (can also be done from the iChat Menu (> Accounts submenu in iChat 4)
On your last paragraph I would ask if you can Video chat at this set of locations ?
This is because in this scenario a feature of one of the modems may be an issue.
Some modems and routers have DOS (Denial of Service) or SPI (Stateful Packet Inspection) protection. These tend to be threshold based and have no setting control in the devices set up pages (other than On or Off).
iChat can stream so much data, particularly in Video chats over what are now quite high Internet speeds that a DOS feature will consider it an Internet attack and cut the port involved. SPI tends to be judging whether the data stream is valid and does not seem to keep up and the result is the same.
In Video chats the end that has the Problem tends to get a Error -7 In the Log.
The Other end gets the "No Data for 10 Secs" message.
Summary.
Essentially though as you have tried a deletion of all the .plists for iChat and you imply both ends it is more likely something about the Network or how the Mac thinks Network resources are already allocated.
There is not an easy .plist deletion for this hence the two methods listed above.
NOTEs: 1) #8 in your list is not related to iChat.
This is what you can now use of Apple Remote Desktop itself. It has it's own Screen Sharing app (without Audio like iChat) that is invoked from the Finder's Go Menu > Go to Serve and entering a VCN:// IP address. (As a System Application, as it were, it is in /System/Core Services/Screen Sharing.app)
It does need both Macs to have the Setting Enabled as you have done it #8 though
2) Some ISPs it is suggested block Screen Sharing. (Verizon was the name I heard mentioned). How they tell what the data steam is specifically I do not know as it would seem that the Audio part of an iChat Screen share would make it look like an A/V chat and that Apple Remote Desktop must be a valid way of working for some people. However iChat is Peer-to-Peer in AV chats and Screen Sharing and some ISPs are known to actively work against these file sharing apps that bear the same generic term.
In your case I do not think this applies as you can Connect Off site via whatever ISP your Campus uses.
I hope this helps.
9:58 PM Wednesday; October 1, 2008

10.8.2 Mac Pro 2009 4 Apple Monitors = doesn't keep the display order and configuration. Please Help me!!

Guys i have a Mac Pro 2009 with 4 monitors attached.
Since i upgrade to 10.8, then to 10.8.1 and now to 10.8.2 my Mac Pro every time it starts, cannot remember the order and appearance of my displays so ihave to reorder them every single time.
Can somebody tell me what to do???
Please help me either wise i ma going to burn it!

I have brand new 10.8.2 Mac Tower with two matching video cards ordered from Apple directly and have the same problem. It wont save the display settings and also cant seem to tell which video card is which either.
In addition, the screen display images if loaded from a personal folder, is also not remembered after startup.
Please advise us what to do, Apple!!!! This is urgent for me. I am proifessional user and this machine is for use on live projection shows. We put a ton of money into this machine and it can't even remeber the displays! Not very amusing.

[solve] Screen resolution changed after upgrading xorg please help?

Ive been using arch for almost a year now and have grown to like it a lot. I recently updated my system with pacman -Syu. during this process my xorg was updated and now im having issues.
I usually run my monitor at 1152 x 864 running at 85 for a refresh rate. Id like to continue doing that.
Since updating i now run at 1280x720.
Everything looks retarded as a result.. and id really like to get things back to normal. Ive pasted my xorg.conf here.. the modeline for the correct resolution is still there but it would seem xorg isnt respecting it.
I will admit to using a REALLY old radeon graphics card (radeon 7000) but it has never been an issue in the past with arch or any other distro.
Please help me restore my usual openbox display settings.
Thanks.
thewayofzen
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/artwiz-fonts"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "int10"
Load "vbe"
Load "record"
Load "GLcore"
Load "dbe"
Load "xtrap"
Load "dri"
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 240 # mm
Identifier "Monitor0"
VendorName "DEL"
ModelName "DELL D1025TM"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 120.0
Modeline "1152x864_85.00" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
Gamma 1.71
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "AccelDFS" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "MergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "BIOSHotkeys" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "ConstantDPI" # [<bool>]
Option "AGPMode" "4"
Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# SubSection "Display"
#DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
EndSection
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 24
# EndSubSection
#EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by thewayofzen (2007-11-16 12:22:55)

Is there anything insteresting in /var/log/Xorg.0.log? Have you tried switching the driver to vesa?
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/artwiz-fonts"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "int10"
Load "vbe"
Load "record"
Load "GLcore"
Load "dbe"
Load "xtrap"
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "DEL"
ModelName "DELL D1025TM"
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1152x864"
EndSubSection
EndSection
Try using the above as your xorg.conf file - I've cleaned it up a bit and removed everything that's not essential. If it works you can always add all the that you need from your old xorg.conf file and if it doesn't - well, I guess it won't hurt to try...
Last edited by fwojciec (2007-11-14 07:09:02)

"Foggy" Display on Grape imac DV Please Help!!!!

Hello,
I have recently purchased off ebay a imac DV, it came with OS 9.1 and is in fantastic condition, runs like a dream, BUT i also purchased OS X 10.3. Now i have quite a little knowledge of computers and I read the instructions carfully. I updated the firmwire in OS 9.1 all was fine installed OS x 10.3 and omg! the scrren looks like its all foggy!! I can see the screen but it looks like i looking through a mist. Has anyone else experianced this and if so is there a way i can fix it?
Please HELP!!!
imac DV 400MHZ Mac OS X (10.3) Grape

Hello and Welcome to Apple Discussions.
Have you checked the monitor settings on Apple Menu > System Preferences... > Displays > The last time I used a CRT Mac was on my iMac 400 Grape but you should have some CRT control options that we don't seee on LCD displays.
The other thing to try is to boot in to OS 9 again and see if the issue persists. Go to Apple Menu > System Preferences... > Start-Up Disk > select OS 9.1 and click Restart.
mrtotes

Junk characters like" � � "displayed in the jsp page please help.

Hi,
I am getting junk characters like � � displayed in the jsp page.
In the JSP page i used javascript "& nbsp" for appending spaces to a string "CCR" to get "CCR " .
Now the Resultant string "CCR " has three spaces appended to its right.
This String is set in session in that JSP page.
In the next JSP page i am getting that string from session.
After getting the string the "substring" function is performed to get only the first 5 charcters of the string. Now the result is displayed as " CCR� � " with has last 2 characters as junk values � � insteed of displaying as "CCR ". Please help me in solving this issue.
Please note that initially the sting "CCR" is got from the Oracle database in Solaris Machine.
Regards,
Vijay

have you tried:
strenuously inspecting the string that is coming from the db? do an actual loop over the string, character by character, dumping to System.out to make sure the characters are EXACT coming out of the db.
note you have to append " " not just "& nbsp"
post the code that is doing the output. the relevant bean code, the jsp, everything relevant - WITH COMMENTS discussing where things are happening.
Also, is it "weird characters" in the browser only? have you done a view source on the actual html source that the browser is rendering (right click in IE and click view source). browsers can act odd if you don't feed then exactly what they want, and it looks like you're feeding it escaped characters that it is rendering as something else.

The main screen display become big in my macbook air?

I dont know what happened, the display screen become sooooo big
I play with the resolution but it didn't work. !! Maybe is something with the ZOOM feature ??
Any ideas???
Thanks

Turn off Zoom from the Universal Access and Keyboard & Mouse panes of System Preferences.
(61176)

Why cant I see my save photos. I saved them from an email but it either comes up a black screen or it say Jpeg. Please help ????

I have some photos I was sent Via email and I would like to save them on my phone but when I saved them when I try and look at them in the camera roll they are black screen or it just says JPEG. Can some please help me on how to fix this??

I have some photos I was sent Via email and I would like to save them on my phone but when I saved them when I try and look at them in the camera roll they are black screen or it just says JPEG. Can some please help me on how to fix this??

Screen display to big to read, please help

Similar Messages

Maybe you are looking for