Screen display while making calls

I have a bb torch 9800, when I make or receive calls my backlight turns off and my screen is blank until I end call, I cannot even use call waiting, speakerphone, etc b'cuz of this issue. Pls help!!

Hey,
Were you able to fic this problem?
I am having the same problem and can't find a way to resolve it
Thank you

Similar Messages

My iPhone4 struck while making call i cant see any icons??

I had updated my phone to 4.3.5 after that,some times My phone is going un responsive while making calls and taking calls. Please let me know the solution

Did you try to reset the phone by holding the sleep and home button until the Apple logo comes back again? You will not lose any data doing a reset.

While making call I am not audible to other end

While making call if I am using loudspeaker mode, I am not audible to other end

Hi Vinzgenius,
From you are describing, it sounds like an issue with the microphone. Take a look at the article below to troubleshoot the issue further. Check to make sure that you do not have any Bluetooth devices connected as well as restarting your iPhone.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Hope this helps,
-Norm G.

My phone turns off while making calls

my handset turns off while making calls, this happens quite often in a day, i restored the phone to factory setting, still didnt help...

I've got the same issue. Really annoying. I was hoping ios5 was going to fix it, but it didn't .
I would be really interested to hear if someone has found the cause of the problem

Blank screen while making calls

hi! im getting blank screen when im making a call,i have checked if its a problem with the proximity sensor but its not.
the screen just goes blank when i hit the call button and i can do nothing for example to end the call or etc.. all i can do to get the screen activated is by pressing the power button but by the time the call is disconnected..hmm ..anyone with the same problem????

This really bad if you can't put the iPhone 3G in a case. What was Apple thinking? They need to explain what the impact is that these sensors have on use of the iPhone so that users can actually use the device to make a phone call.

Trouble while making calls

Has anyone experienced while making a call that the iphone 3gs' screen goes black? This has already happened to me twice and i've only had the phone for 2 days. When it happens I can't even power the phone back on. I have to connect it to the charger to get the screen back. It has occurred a few other times when in the contact list also but the screen comes back up immediately.
Is anyone else having issues with the contact list moving slowly when opened on the main screen? This is not a problem when I access it through my phone icon.

The screen always goes black during a call. Like Tamara said, the proximity sensor switches it off to save battery.
In comparison to the 2G, however, I got the impression that it a bit longer until the screen wakes up, or even sometimes hangs until it returns.
I had the same black screen which wouldn't turn on for a couple of seconds after using voice mail.

Audio quality with iPhone 5 new earphones is not good while making calls.

I have new Factory Unlocked iPhone 5 with new earphones. These earphones are pretty smooth while listening to music. When it comes to making calls there is lot of noise background or a sort of amplifier sound and both the ends the audio is not clear. Did any one face this issue with new earphones with iPhone 5? if so, what is the solution for this? Can any one help me resolving this issue as I am the extensive user of iPhone 5 with new earphones? Thanks in advance.

I have new Factory Unlocked iPhone 5 with new earphones. These earphones are pretty smooth while listening to music. When it comes to making calls there is lot of noise background or a sort of amplifier sound and both the ends the audio is not clear. Did any one face this issue with new earphones with iPhone 5? if so, what is the solution for this? Can any one help me resolving this issue as I am the extensive user of iPhone 5 with new earphones? Thanks in advance.

While making call I can hear other person but other person can't hear me

while making a call I can hear other person but they can't hear me

i'm facing the same problem
have you taken it to an istore yet?

Does anyone have trouble with the screen disappearing while making a call and trying to turn the speaker on?

I have to use the speaker portion of my phone whenever I make or take a call. Sometimes the screen goes out as I'm trying to hit the speaker button. Does this happen to anyone else? And any suggestions how to stop this?

The iPhone is designed to have the screen go dark during a phone call, since the phone is normally up to your ear and you would not want to be touching the screen with your ear and possibly touching random buttons. This is done by the proximity sensor, which is located near the ear speaker on the phone. When you are reaching to turn on the speaker, it is possible that you are crossing this sensor light and it turns off the screen. I have done this before. If you try reaching from the bottom of the screen, does this still happen? Try to keep your hand away from the top front portion of the phone and see if that helps.

IPhone gets mails while making calls despite pushing switched off

Hello,
My iPhone unwillingly (by me ) gets mail messages from the server while I make a call, (I have the mail pushing switched off).
I want to disable this because this way I'm unwillingly using my credit...
My iPhone didn't use to do this in the past (prior to the 3.1.2 update??).
Thanks in advance for any clues in resolving this.

Yes (and No...)
In the first screen ("Settings" -> "Mail") "Fetch new data" was set to "Off".
Which, surprise surprise, made me think it was switched off...
After reading your reply I decided to have a deeper look at this. I clicked on the "fetch new data" button. Another screen came up where one can select how often your phone is supposed to fetch. Also here a "√" sign next to the button "manually" made me think the settings were ok.
I then decided to click the "advanced" button at the bottom of the screen to see what else was there.
And guess what, the settings for each individual mail account (I read more than one email account), were set to "fetch"...
I switched them for each account to "manual" and now everything is fine!
Confusing to me, but ok, it seems to work, so thanks a lot!

Screen dims while making adjustments

When using LR 2.3, I've recently started to notice a problem that starts to occur at some point after LR has been active for an extended period (few days?). All of a sudden --the monitor screen momentarily dims while I'm moving a slider or keying in a new setting (in the Develop module); and once this starts, it happens for any type of slider change and with any image. Then, as soon as the mouse button is released, the screen instantly returns to normal brightness. The degree of dimming is quite considerable and naturally makes it nearly impossible to assess the effect of a setting change in "real time".
The only way I've found to eliminate this problem is to quit and restart LR. The problem has never happened (to me) with previous LR versions, although I've been using LR steadily since the pre-1.0 beta days. I've been using version 2.3 ever since it became available, but I've only noticed this behavior during the past few weeks. Yes, I know it's best not to run LR (or any app) for very extensive intervals, but is there some other likely cause for this problem that I should try eliminate? Is this perhaps a known 2.3 issue?
I use a Mac Intel Mini (2.0 Ghz), 4 Gb RAM, OS X 10.5.6, NEC LCD 2690 UXi.
Phil

One reason to quit and restart LR at least daily is to back up the catalog.
I agree, however I just checked on the problem and find it has returned–but with far less than 24 hours of time elapsed since the last quit/restart of LR.
I then quit all the other programs that were running, but that didn't help. I have no special reason not to do the 2.4 update, but I, too, am skeptical that the update is likely to solve an issue that appears to be (more-or-less) limited to my own system.
Phil

Screen lock while in call bug

THE most annoying bug for me so far - I got the phone set to automatically lock (pattern unlock) after 2 minutes of the screen being off. If I receive a call, proximity sensor hits the screen off as you'd expect. 2 minutes later I have to wake the screen manually with the power button, unlock it just to be able to end the call.

I've tested this here both for incoming and outgoing calls but this doesn't happen for me. Which software version do you have in your phone? You can see this under Settings -> About phone.
Are you sure that the other person has not already ended the call?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

E7 always restart while making call with Bluetooth...

Has anybody experienced a problem that you can not make calls when qwerty keyboard is in use and Bluetooth to headset is activated because phone makes every time restart while setting up the voice call. It just first indicates that "disconnecting Bluetooth" and soon after that restarts. And when you make it again and again it does the same.
Hopefully this is going to be corrected in next E7 SW release.

No, contrary to this I can pick up the phone, close the keyboard and no interruption takes place. However, I purchased my phone only two weeks ago and it might have the new SW already.
Attraction wrote:
Has anybody experienced a problem that you can not make calls when qwerty keyboard is in use and Bluetooth to headset is activated because phone makes every time restart while setting up the voice call. It just first indicates that "disconnecting Bluetooth" and soon after that restarts. And when you make it again and again it does the same.
Hopefully this is going to be corrected in next E7 SW release.

Issue while making calls

Hi Team,
I am new to the community.I am using iPhone 5S for past 6 months and from India.
Issue is depending upon the signal the network will be changing from 3G to LTE in my phone.
While this is happening I am unable to make calls or receive calls.
Only When i try for 6 to 10 times I am able to call.
I tried all possible troubleshooting steps as suggested by Apple support,still no luck.
I am still using IOS 7.Will an upgrade help me ??
Please advise..

Hi ananthj,
Welcome to the forum!
To isolate the case, you can try a different SIM card on your device. This is to check if you will encounter the same behavior. If it's still the same you can reset the phone to the factory setting. Just don't forget to back up your files first. Check the link below for the step-by-step procedure:
http://www.windowsphone.com/en-us/how-to/wp7/basics/restore-a-backup-to-my-phone
http://www.windowsphone.com/en-ph/how-to/wp8/basics/reset-my-phone
Hope this resolves your issue.

Hi-pitched screeching sound while making calls

While using my iphone 5, OTHER PEOPLE report hearing a high-piched screeching sound at various times during the conversation. I don't hear anything unusual (no noise)!!. Has anyone else had this problem? Known fixes? I've had this phone for 1.5 years -- problem only recently, but getting more frequent.

iphone 5 7.1.2, Verizon
I am having this issue since 4 months. I have received multiple devices as replacement as my phone was still under warranty. Nothing seems to solve this.
I was being suggested below , I tried them all
1. Mark calls with ###, once I marked them they came up with an answer there is nothing wrong with the network , change the phone
2. Next phone had same issues, answer was its due to incoming calls from T mobile.
When I showed them even AT&T people heard it, they suggested to change the phone
3. Next phone had same issues, they suggested me not to use bluetooth and talk from an area with full bars (now dots). I receive at least 3 dots if not 4 or 5 at my home.
4. Next phone, they suggested to not restore the back up but setup Iphone as new. I did and only installed 1 app. Still people on other side had screeching sound, this time it was Sprint and T mobile both.
Funny part when I called apple support and verizon for the first time, even they could hear that sound.
No one seems to know why this is happening. I may buy a basic clamshell phone, insert my SIM card in that and use it for a few days to deduce if its device related or carrier. Again I am no expert.

Screen display while making calls

Similar Messages

Maybe you are looking for