Screen doesn't align properly when closed on my NEW macbook

It is slightly out towards the right hand side. Like my old powerbook was after I dropped it once. I have NOT dropped this one. Should I return it? Could I return it?

Ring apple 0800 039 1010 for free, it clearly isnt an acceptable fault.
They'll put you through to someone that'll help.
I'm sorry to hear this, but good luck.

Similar Messages

Right tab doesn't align properly when using leading decimals (for TOC)

I have a problem. I'm using the latest version of Pages. When I create a table of contents and use the right tab with leading decimals, they don't align straight on the right side. No matter what I do, they are always off a bit.
I also have MS Word, and I can do the contents with right tab just fine with no problems.
Any ideas?
Thanks,
Bryan

Ok just found a workaround/solution.
(always happens right after I ask, for some reason).
Rescaled my project but kept the size and positions the "same and centered".
Then I replaced all my background images with bigger versions (previously I had cropped them at the right and bottom).
Now my backgrounds were all great, but all my objects were too low.
All I had to do was ctrl+A to select everything on a slide, and then change the Y value for the whole bunch to zero.
This magically placed all objects in their correct respective spots.
Hope that helps someone out!
Russ

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

Site doesn't display properly when viewed in Windows 8.1 and IE11

Web site doesn't display properly when viewed in Windows 8.1 and IE11. Site html and css validates no errors at W3C. Any ideas?

The following is what I see in IE11 on a Windows 8.1 system, no difference using Firefox, Chrome or Safari on the same system.

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

I am English but live in Spain, When I got my new Macbook Pro I set the language to English, so far so good. Then I stupidly set the keyboard to British when it is obviously a Spanish keyboard. How can I reset it to Spanish. Sorry cant find question mark

I am English but live in Spain, When I got my new Macbook Pro I set the language to English, so far so good. Then I stupidly set the keyboard to British when it is obviously a Spanish keyboard. How can I reset it to Spanish. Sorry cant find question mark

LizMaddock,
you can reset the input source to Spanish by selecting the Keyboard pane of System Preferences, selecting the Input Sources tab, and pressing the “+” button in the lower-left corner to select one of the Spanish input sources. The “Spanish – ISO” input source is most similar to the physical Spanish keyboard layout.

Hi, ive been backing up my computer to an external hard drive (with time machine). When i buy a new macbook will that hard drive put all my info on to the new computer?

hi, ive been backing up my computer to an external hard drive (with time machine). When i buy a new macbook will that hard drive put all my info on to the new computer?

When you boot the new machine for the first time, you'll be prompted to import your data from a Time Machine backup.

When I got my new macbook air, apple downloaded my photos on my new laptop from my old laptop, but now i have duplicates photos because when I started icloud, I got duplicates. How can I delete duplicate photos?

when I got my new macbook air, apple downloaded my photos on my new laptop from my old laptop, but now i have duplicates photos because when I started icloud, I got duplicates. How can I delete duplicate photos?

HI ..
On the new MBAir, open System Preferences > iCloud
Deselect the box next to Photo Stream then reselect it then restart your Mac.

At the Apple WWDC 2012 when they announced the new MacBook Pro, the used something to rotate it. What was it?

At the Apple WWDC 2012 when they announced the new MacBook Pro, the used something to rotate it. What was it?

Hello Sam,
strangely enough, it went away by itself, and until now, it did not come back. I also believe it must be soms sort of graphic card connection failure or something like that, it`s very strange though. I also did let it know to the apple store, and explained it, and they were willing to repair it, but now everything is ok, so it has no meaning to go to the apple store, maybe for a checkup, that would be interesting maybe.
So, I would suggest to keep on using your computer for a couple of days, and shut it down and restart it as often as possible. And when it has not dissapeared after 3 or 4 days, then it`s good I think to go to the apple store.
If you can post here how it goes or how it went, would be nice, and if there is anything more I can help you with, let me know, kindly, Steven

When will a the new Macbook PRo or Macbook Air come out?

When will a the new Macbook PRo or Macbook Air come out?

Sorry, no one here will know that.

[SOLVED] Laptop doesn't suspend anymore when closing lid [GNOME 3]

Hi there!
Since I upgraded to GNOME 3 recently, my laptop (Acer Aspire TimelineX 3820TG) doesn't suspend anymore when I close the lid. Instead, it just turns off the screen. If I choose suspend from the menu, it does suspend properly.
I googled a bit and found out that the option what to do on closing the lid was dropped in GNOME 3, setting suspend as default action. That's exactly what I want...
Also, I checked that option via gnome-tweak-tool and dconf-editor, and (surprise!) it was set to 'suspend'.
Anyone got an idea what to do to make it suspend again on closing the lid?
Last edited by perpetrator (2011-10-17 14:25:26)

Sorry to bother you again, but for some reason it doesn't work anymore...
Somehow it can't lock the GNOME session, because when I enter the above line from /etc/acpi/handler.sh manually as root in TTY1, I get this error:
** Message: Failed to get session bus: Befehlszeile »dbus-launch --autolaunch=c9375f4ea0008d92177b28db000009ae --binary-syntax --close-stderr« brach mit von Null verschiedenem Beenden-Status 1 ab: No protocol specified\nAutolaunch error: X11 initialization failed.\n
If I enter this command inside GNOME, everything works just fine, it locks the screen and suspends.
EDIT:
Setting the XAUTHORITY environment variable properly did the trick. Therefore, I borrowed some lines from here: https://wiki.archlinux.org/index.php/Su … losing_lid
Thread marked as SOLVED again.
Last edited by perpetrator (2011-10-17 14:25:11)

The cable doesn't work properly when connected as data cable.

Hi,
I have recently encountered problem of the cable. The thing is that if i use it just for charging with the plug, it works fine. But when i wanna use it with computer (i.e., accessing itunes, etc) or with my car, it doesn't work properly, it keeps switching between charging and discharging very fast. I will appreciate your quick support!
Regards,
Farhan

Just for all the people to know, I found out the solution. You have to mark the correct side of the charging cable which connects at inlet of the phone. Because this point acts as a chip when used as data cable or auxiliary use (car,etc). That's why it charges with the plug on any side. I don't know what's the frequency of it happening to iphone 5s users, because I bought it recently (iOS 7.1.1) Hope it helps to others in future.

Preview ok,but doesn't work properly when build dvd

everything is ok when preview but when i built to dvd folder,media player classic only could play separate dvd file,and no main menu. then i try windows media player, the main menu came out but none of the buttons work.
Any ideas? Thanks a lot

sorry about the multiple posts. mines is encore DVD 2.0 trial on windows XP. I've checked the help and FAQ but none of them related to my situation. I've got 1 sub menu with 1 main menu. no problem when preview but when i built a dvd folder it doesn't work properly. media player classic couldn't play the main menu, sub menu work but not the buttons on it. windows media player can play the main menu but none of the buttons work either!! I've been working on it for a whole day. course work deadline is this Thu, so please give me some advice. Many thanks.

Twitter DM screen doesn't automatically update when receiving new DM?

Hi,
I'm using Firefox 33.1.1. If I try and have a conversation via direct messages on Twitter, when I received a new DM, the screen doesn't automatically update to show the new message at the bottom of the conversation window. When I send a message to the other person, the screen does update and my message appears at the bottom, so this issue only happens when people send DMs to me. I see the notification pop-up in the bottom-right of the screen showing that I've got a new DM, but it doesn't appear in the DM window and I have to refresh the page manually every time. It's quite annoying.
I've tried restarting Firefox in Safe Mode, so no add-ons or running, and the issue persists.
Any idea what's causing it? Is it a compatibility issue with Firefox?
Thanks!

Potentially this is an issue with Firefox, I would be happy to test.
I ran a test between two vms. I messaged myself :-/ but when I switched between the two instances of the message, it did not automatically update until I tried to send a new message. There may be better test cases, but I can confirm the behavior. As for investigation for development, bugzilla.mozilla.org and stackoverflow.com should have the right audience for troubleshooting why.

Firefox 17.0 doesn't warn me when closing multiple tabs any more

hi all
Having updated to Firefox 17.0 (from 16.0.2), for some reason I don't get warned when closing multiple tabs any more.
I've confirmed the relevant options are selected and am 100% certain this was working fine before updating Firefox today.
I've replicated the problem on my vista 32bit platform and on XP 32 bit too.
I also looked at the changelog for Firefox 17 but can't see any explanation for this change in behaviour, although I wonder whether this might have something to do with it "772319 No option to disable the "Close other tabs" prompt."
As I use Tab Mix Plus (add-on), I've also checked Firefox in safemode and have found the native tab warnings not working, so have concluded it's an issue with Firefox (rather than something to do with an extension).
I've checked "about:config" and "browser.tabs.warnOnClose" is set to true, as is "browser.tabs.warnOnCloseOtherTabs".
Any help would be appreciated.
Thanks,
Gary

I have this problem too. i have tab mix plus but in my case browser.tabs.warnOnCloseOtherTabs and browser.tabs.warnOnClose are both set to true but i still get no warnings which sucks because i accidently click on close alot.

Screen doesn't align properly when closed on my NEW macbook

Similar Messages

Maybe you are looking for