Screen doesn't display anything. GT70

Me as a few other I have seen on the forum is having the problem were the laptop simply refuses to use anything but the Intel HD 4000 video card. I tried several different maximum performance settings to no success. I went into my device manage and display manager to see if the computer even knows it has the GeForce GTX 670m video card. It acknowledges the video card and I thought. If i disable the Intel HD 4000 it has to use the GTX 670m right? WRONG. The screen went completely black and refuses to display anything. I have absolutely no idea what to do now and need your help. I have tried hooking it up to another monitor but still nothing.
I dont understand in the first place why it refuses to use the graphics card I have paid for. Without it it has the same performance as my 4 year old 800£ computer I upgraded from.

Removing the HD4000 that is used for non 3d load display of course results in a black screen as the Nvidia is only meant for 3D load.
For the switching working make sure your notebook has SCM (for Win 8): http://www.msi.com/service/download/utility-19670.html and Nvidia VGA OC (for Turbo/Win8): http://www.msi.com/service/download/utility-19690.html or S-Bar (for Win 7): http://www.msi.com/service/download/utility-19324.html and Nvidia VGA OC (for Win 7): http://www.msi.com/service/download/utility-18804.html installed

Similar Messages

Satellite M30X-111 screen doesn't display anything but external monitor works

My laptop screen just doesn't display anything (look like when the computer is off) but when I connect the external monitor, then the desktop will be displayed on that monitor. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.
I again have to plug in the external monitor, and after I tried to reboot, I keep pressing F8 but the start up mode doesn't come up, only the sound of when you keep pressing a button for too long beeps, however, the laptop monitor works again.
How do I fix this problem?

Hi
According to your first posting I presume that LCD display on your notebook is defective. If you can not see BIOS settings or Toshiba welcome screen there must be some display problem.
Experiment with external display is to be sure that graphic card is not responsible for that. In your case it works with external display and graphic card can not be responsible.
Like I said try to enter bios settings and report if you can see Toshiba welcome screen.

TS3274 dropped ipad now screen doesn't display

My daughter dropped her ipad and now the screen doesn't display anything. We can see some light changes but nothing else. It appears that the screen can still be touched to use apps because we are able to play music. Any suggestions on what we should do?

Not sure if you've fixed this, but it really works. After reading similar advice, I banged it on the corner of my couch and the display totally came back clear as day. Could not read it before.

MSI 970a-g46 motherboard starts up but doesn't display anything.

Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
CPU: AMD Phenom 2 x4 965
GPU: nVidia GeForce 560 GTX
Ram: 8gb Kingston HyperX Fury 1866mhz.
PSU: Corsair 650TX (650 Watts)
Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
I've gone over and checked/tested numerous things:
* The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
* I've tried jumping the CMOS multiple times to no avail.
* I tested the ram on another computer and it worked just fine on that one.
* I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
EDIT: Some other things I did but forgot to mention:
* Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
* Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
* Re-seated GPU multiple times, re-connected cables multiple times.
What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.

Quote from: rhradacut on 06-January-15, 16:49:14
What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
Once again thanks for helping out on solving my problem.

Youtube video screen doesn't display with firefox 3.6.15 and adobe flash plug-in 10,2,152,32 installed.

The video screen (and its controls) doesn't display. All the other parts of the screen display correctly.

Yep, looks that way to me, too. There's (right this second) '''147''' folks on this thread: ->https://support.mozilla.com/en-US/questions/789534 and
'''504''' on this thread: ->https://support.mozilla.com/en-US/questions/776670?page=2#answer-143849, not counting our''' 7 '''on this one (my screen's white, too). There's indications that it's a Google/Adobe thing, or a Google/YouTube thing. (That one's after linking Goggle Acct with YouTube.
And yes, it was still messed up in Safe Mode.
My take on it is to removing/disallowing cookie setting on YouTube for now, till '''whoever '''finally gets it fixed.
I hope they'll send a email telling all of us when it's fixed. Heaven knows they have our addresses...
OOPS--and another '''93'''on this thread: ->https://support.mozilla.com/en-US/questions/789443 And '''117''' on this one:->https://support.mozilla.com/en-US/questions/789576

My Media Browser in Garageband doesn't display anything except the very first song I have in this mac.

I have been always wanting to edit some songs and make a remix of it. However, the media browser in garageband in my macbook pro doesn't display any songs, except the very first song I added to my laptop. I have tried to do every suggestion from other forums (e.g. check the itunes library, etc) and none worked. One thing I realised is that I can still drag and drop the song directly from Finder to my Garageband timeline. Nevertheless, it annoys me whenever I open the media browser since this is not what my mac should do. I would be very grateful if someone could assist me with this matter.

Have you checked, if the search field at the bottom of the Media Browser is cleared? It should be set to "All", if you click the looking glass. Otherwise the list will be filtered.
And the drop-down menu should show "iTunes", if you want to see all songs.
If these simple measures do not help, try the fix for "oddball" problems and remove the User Preferences - see the FAQ:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)
Regards
Léonie

PaintComponent method doesn't display anything on JLabel?

I am trying to show a histogram for a image in jlabel, but its not working.
//hist : array containing histogram values
//wid: width of image
//ht: height of image
mylabel.add(new showData(hist,wid,ht));
The code that I am using to display histogram is:
class showData extends JLabel{
int w,h;
int hist[] = new int[256];
int max_hist=0;
public showData(int[] histValue,int w, int h) {
System.arraycopy(histValue, 0, hist, 0, 256);
this.w = w;
this.h = h;
for (int i = 0; i < 256; i++) {
if(hist>max_hist)
max_hist=hist[i];
@Override
protected void paintComponent(Graphics g)
super.paintComponent(g);
int x = (w - 256) / 2;
int lasty = h - h * hist[0] / max_hist;
for (int i=0; i<256; i++, x++) {
int y = h - h * hist[i] / max_hist;
g.setColor(new Color(i, i, i));
g.fillRect(x, y, 1, h);
g.setColor(Color.red);
g.drawLine(x-1,lasty,x,y);
lasty = y;
When debugged, I found that showData() method was getting invoked, but paintComponent() doesn't. Why is it so? The Jlabel 'mylabel' doesn't show anything?

Check size and location of the JLabel. If size 0 the paintComponent() is not called. Try to set preferred size to the label.

Custom Screen doesn't display properly

I am on SRM 5.5 and I have created a custom screen with a custom field in all the proper structures it's supposed to be in. The screen has been generated into HTML and it has a service. I am calling the screen in the BADI BBP_CUF_BADI. The field is showing properly, but my problem is that my custom screen is not displaying where I expect. If I generate the HTML template as a type classic, it doubles my fields when it displays and it shows them at the top of the header above all the other standard fields.
If I create my HTML template as WEBGUI, it covers the entire Header section and displays partly at the top over the standard buttons on the screen and partly at the bottom after the last header field. I presume the custom screen should display after the last header field. Does anyone know why the screens behave differently when I generate the templates as Classic (shows twice) versus WEBGUI and does anyone know what I might be doing wrong?
Points will be rewarded.
Thanks,
Marty

Hi
There seems like a bug in the SRM system...
Have you created a bespoke service in this case ? Please give some more insights in next reply ?
Meanwhile, go through the links which might help ->
Contract Custom fields are not showing
Re: New Tab in Bid Process Screen
Re: New screen with table control information in Process Bid Invitation
BBP_CUF_BADI_2
Regards
- Atul

After rendering a movie, the DVD project screen doesn't display

Q. After rendering a movie, my DVD project screen won't display?

Hi and welcome to the forums!
Sorry to hear about your mishap.
Do you have a backup using desktop manager? If so, your data is in there. Had you recently sync'd with outlook?
Did water get into your BB? If so, place your BB in an open container of UNCOOKED white rice and set in a warm place for a few days. Rice should absorb the water.
Let us know!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Photoshop CS4 doesn't display anything

I recently bought an Nvidia GTX260 graphics card hoping it would boost performance also in Photoshop. After installing the latest driver directly from the Nvidia website, I still have this problem: when I open a project, there is no error but nothing is displayed in the drawing area (so no canvas and no layers). The application works fine if I turn off OpenGL drawing. However I was hoping to use this feature to improve performance.
I tried:
1. Reinstalling the driver. Also I tried switching the openGL drawing option off before reinstalling and then switching it on after installation.
2. Enabling and disabling each advanced option I have to see if a particular one causes the problem.
I also mention I reinstalled windows and all my software and still does not work.
I was using NVidia 7300 graphics card before and experienced no difficulties.
I'm running Windows Vista x64 on a intel q6600 platform with 4GB RAM.
If you know of any solution to this problem please help.

Thanks dec9. I did as you suggested.
This is becoming really weird.
So here is what I did:
I download and install DriverSweeper (latest version). It (surprisingly) erases all the Nvidia dlls and files so when I reboot, I have to reinstall Nvidia drivers for my graphics card. I install them and reboot. I open Photoshop and switch on OpenGL drawing and (although I did not expect it) it worked. I could see the canvas with the drop-shadow effect. I also mention here that when I switched on the OpenGL drawing feature, my graphics card name was not displayed in that rectangle above Advanced Options (usually it says what graphics card Photoshop detected).
So far so good.
I then exit photshop and restart my computer again. I get the same problem. It does not display anything. I tried a couple of times (also enabling and disabling OpenGL) and still nothing.
What is also "funny" is that if I move the layers on the canvas, the changes are reflected in the thumbnail of the layer in the Layers dock. And while I drag the window containing the project, I can see my work on the canvas. It is when I complete the drag operation that the canvas dissapears again.
It's definitely a driver thing.
Thanks for your help.

The bottom corner of my macbook screen doesn't display black

Hi,
I bought my MBPr 13 inch in September last year. Lately I have noticed when watching films and youtube videos, etc, the black area of the display has white blurs in it.
It doesn't affect the performance of the computer obviously but it sends my OCD into rage mode. I'm pretty sure that it was caused when I accidentally knocked it off the sofa.
Can this be fixed? What has actually happened to the screen? Any help will be much appreciated.
Thanks,
James

The solution is probably a new display. Bring the MBP to an Apple store genius bar for a free evaluation.
Ciao.

When booting into my previously working Windows partition, the screen is not displaying anything. It was working before...

Im not sure what happened but I just tried to bootinto my Windows partition and the screen is completely blank. I dont see the Windows boot logo and I eventually here the startup noise. I have also been able to logon without seeeing the screen.
Ive done a PRAM and SMC reset and neither has helped. I suspect that a recent update on OS X may have caused video issues but I am not sure of it. All of my research has led me to a black screen during the install of Windows onto the bootcamp partition. Nothing delaing with an actual running Windows partition that just goes to black.
Any suggestions?

There is more than enough disk space available on the partition.
Booting from the install CD doesnt work because I cannot seeing anything.
Removed my install of Windows 7 via bootcamp and tried to reinstall but I got the same black screen (no backlight as usual).
BTW, OS X does affect the Windows install. If you update the driver for the say the video card, that means that the apple drivers that are needed to run Windows are more than likely to be affected.
Just like VMware tool running on a ESXi 4.1 host will need to be reinstalled on an ESXi 5.0 host. Same hardware but the tools on the VM need to be updated to reflect the host OS.

TS3274 My ipad display will not function, the screen will not display anything when turned on, you can see that the screen lights up but it is completely black

The screen on my iPad will not display, the screen lightens up when powered on but the screen stays black, any fix for this that I can do at home?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

My screen doesn't display. do i need a new iPad?

My iPad charges, and displays on my computer when connected. But the screen is blank. Has this happened to anyone else.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipadhttp://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htmhttp://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274http://support.apple.com/kb/TS3274
 Cheers, Tom

Screen doesn't display any data.

Hi experts,
In the program there are two screen. In the first screen-Screen5000- there are four buttons and when user pushes these buttons the second screen-Screen250- displays. But problem starts here. Second secreen does not show any data from the itab.
Code:
INCLUDE ZFC_PROJE1TOP                            .    " global Data
INCLUDE ZFC_PROJE1PBO                           . " PBO-Modules
INCLUDE ZFC_PROJE1PAI                             . " PAI-Modules
INCLUDE ZFC_PROJE1FRM                           . " FORM-Routines
PROGRAM ZFC_PROJE1.
TABLES : ZFC_CDTP_MESLEK, ZFC_CDTP_MUSTERI.
DATA   : ITAB LIKE ZFC_CDTP_MUSTERI OCCURS 0 WITH HEADER LINE.
DATA   : ITAB2 LIKE ZFC_CDTP_MESLEK.
DATA   : BEGIN OF ITAB3 OCCURS 10,
             MUSKD LIKE ZFC_CDTP_MUSTERI-MUSKD,
             END OF ITAB3.
DATA   : SUREC(1).
DATA   : ISLEM TYPE I.
START-OF-SELECTION.
SELECT * FROM ZFC_CDTP_MUSTERI INTO TABLE ITAB.
CALL SCREEN 5000.
END-OF-SELECTION.
*& Include           ZFC_PROJE1PBO
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'GUI'.
SET TITLEBAR 'BASLIK'.
LOOP AT SCREEN.
    SCREEN-INPUT = 0.
    MODIFY SCREEN.
ENDLOOP.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module STATUS_0250 OUTPUT
      text
MODULE STATUS_0250 OUTPUT.
SET PF-STATUS 'GUI2'.
SET TITLEBAR 'BASLIK2'.
IF SUREC EQ 'S'.
    LOOP AT SCREEN.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDLOOP.
ELSEIF SUREC EQ 'U'.
    LOOP AT SCREEN.
      IF SCREEN-NAME EQ 'ITAB-MUSKD'.
        SCREEN-INPUT = 0.
        MODIFY SCREEN.
      ELSE.
        SCREEN-INPUT = 1.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ELSEIF SUREC EQ 'N'.
    LOOP AT SCREEN.
      SCREEN-INPUT = 1.
    MODIFY SCREEN.
ENDLOOP.
ENDIF.
ENDMODULE.                 " STATUS_0250 OUTPUT
*& Include           ZFC_PROJE1PAI
*&      Module USER_COMMAND_5000 INPUT
      text
MODULE USER_COMMAND_5000 INPUT.
CASE SY-UCOMM.
WHEN 'YENI'.      PERFORM YENI.
WHEN 'DEGISTIR'. PERFORM DEGISTIR.
WHEN 'GORUNTULE'. PERFORM GORUNTULE.
WHEN 'SIL'.       PERFORM SIL.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_5000 INPUT
*&      Module USER_COMMAND_0250 INPUT
      text
MODULE USER_COMMAND_0250 INPUT.
CASE SY-UCOMM.
WHEN 'ONCEKI'.   PERFORM ONCEKI.
WHEN 'SONRAKI'. PERFORM SONRAKI.
WHEN 'KAYDET'.   PERFORM KAYDET.
WHEN 'GERI'.     PERFORM GERI.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0250 INPUT
*& Include           ZFC_PROJE1FRM
*&      Form YENI
      text
--> p1        text
<-- p2        text
FORM YENI .
SET SCREEN 250.
SUREC = 'N'.
ENDFORM.                    " YENI
*&      Form KAYDET
      text
--> p1        text
<-- p2        text
FORM KAYDET .
check SUREC eq 'U' or SUREC eq 'N'.
if SUREC eq 'N'.
    select count( * ) from zFC_CDTP_MUSTERI into sy-tfill
      where MUSKD = itab-MUSKD.
    if sy-tfill ne 0.
      message s004(ZSG_CL_MESAJ) with 'Bu Kod Zaten Kayıtlıdır'.
      exit.
    else.
      clear zFC_CDTP_MUSTERI.
      move-corresponding itab to zFC_CDTP_MUSTERI.
      insert zFC_CDTP_MUSTERI.
      append itab.
      describe table itab lines islem.
    endif.
elseif surec eq 'U'.
      clear zFC_CDTP_MUSTERI.
      move-corresponding itab to zFC_CDTP_MUSTERI.
      modify zFC_CDTP_MUSTERI.
      modify itab index islem.
endif.
surec = 'S'.
ENDFORM.                    " KAYDET
*&      Form GERI
      text
--> p1        text
<-- p2        text
FORM GERI .
LEAVE TO SCREEN 5000.
ENDFORM.                    " GERI
*&      Form DEGISTIR
      text
--> p1        text
<-- p2        text
FORM DEGISTIR .
if SUREC EQ 'S'.
    SUREC = 'U'.
elseif SUREC eq 'U' or SUREC eq 'N'.
    SUREC = 'S'.
    ENDIF.
SET SCREEN 250.
ENDFORM.                    " DEGISTIR
*&      Form ONCEKI
      text
--> p1        text
<-- p2        text
FORM ONCEKI .
check SUREC eq 'S'.
check ISLEM ne 1.
ISLEM = ISLEM - 1.
ENDFORM.                    " ONCEKI
*&      Form SONRAKI
      text
--> p1        text
<-- p2        text
FORM SONRAKI .
check SUREC eq 'S'.
check ISLEM ne 1.
ISLEM = ISLEM + 1.
describe table itab lines ISLEM.
ENDFORM.                    " SONRAKI
*&      Form GORUNTULE
      text
--> p1        text
<-- p2        text
FORM GORUNTULE .
SUREC = 'S'.
SET SCREEN 250.
ENDFORM.                    " GORUNTULE
*&      Form SIL
      text
--> p1        text
<-- p2        text
FORM SIL .
DATA : ans(1).
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
   DEFAULTOPTION        = 'N'
    TEXTLINE1            = 'KAYIT SILINECEK?'
TEXTLINE2            = ' '
    TITEL                = 'SIL'
START_COLUMN         = 25
START_ROW            = 6
   CANCEL_DISPLAY       = 'X'
IMPORTING
   ANSWER               = ans.
if ans = 'J'.
    delete from zfc_cdtp_musteri where muskd = itab-muskd.
    describe table itab lines sy-tfill.
    if islem eq sy-tfill.
      delete itab index islem.
      islem = islem - 1.
    else.
      delete itab index islem.
    endif.
endif.
ENDFORM.                    " SIL

Hi,
Remove the statement CALL SCREEN 5000 from Start-of-selection event and place it in the <b>end-of-selection</b> event.
START-OF-SELECTION.
SELECT * FROM ZFC_CDTP_MUSTERI INTO TABLE ITAB.
END-OF-SELECTION.
CALL SCREEN 5000.
Try this.
regards,
Saumya

Screen doesn't display anything. GT70

Similar Messages

Maybe you are looking for