Screen Edge/Rim not level at right side

My iPod touch 4Gen that I got on Black friday in 2010, has the right hand side of the screen edge/rim not level, when you run your finger along you will get a "sharp" edge/rim to the screen.  And it is just the edge/rim of the screen.  This has always had it and it made me notice it more today when my Brother got a new iPod touch.  Is there any point at getting Apple to look at it.  I should have got it replaced back when I got it but back last year I was more into the light bleed via gaps in the rim (as this was the second one), I didnt really notice it until it was too late aka out of the 14 day return.

This is the way it came, so nothing to do with me.  I will give AppleCare a ring and explain see what they will suggest.  And if they say to bring it back I will do it.
Am sure if the batch is all the same or some of the batch, then its was done by Foxconn during the manufacting.
Dents and scratches yes you have to accept that, but not the screen being defected.  I should have changed it within the 14 day period.
I am really puzzled why foxconn has a hard time creating prefect device.  I went thought 5 iPad 2s because they werent prefect, and 4 MacBook Pro 17"s because they werent prefect.
Plus here in the UK we have greater consumer protection when it comes to faults.  The edge/rim of the screen being lower to the rest of the device with no signs of damage = automatic proof that its a inherted fault.

Similar Messages

  • My ipad screen is black / darker on the right side, but light on left.. What should I do? I try to reset it, but it can't workat all..

    My ipad screen is black / darker on the right side, but light on left.. What should I do? I try to reset it, but it can't workat all..

    I suggest that you take the MBP into an Apple store genius bar for a free evaluation.  There are liquid sensors inside and they should check if any have been activated.  This may give you a clue as to what you may expect regarding future reliability.
    Ciao.

  • In ipad email, I can see the content "subject " of the email in the preview pane but not in the right side of the screen.  its blank...any ideas

    In new IPAD, in email, can see subject data in preview pane but not on right side of screen, its always blank  any ideas

    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • How can i share contact from recent call screen?  Used to go to right side of number and it would pull up your options, but share contact is not there anymore

    how can I share contact from the recent call screen?  Used to be able to touch right side of number and have that option.  It is no longer there.

    Touch the cirle i and then scroll down to share contacts.  I just tested this out myself.

  • Bottom 2/3 of screen messes up when pressing on right side of frame

    My MBP is under warranty, but it's having a screen issue that I have already sent it into Apple for repair once before. I'm figuring out what causes the problem though. It appears that when the right side of the screen's frame flexes (the 3/8" piece of aluminum) or when I push about 1/3 of the way up from the bottom, it causes the bottom 2/3 of the screen to fade to black. It's so strange. It first started manifesting itself as flickering in the screen where stripes of what was on the screen (left to right stripes) would start getting jumbled and jump around the screen. Very hard to describe.
    Anybody know what's around the point just above the right side hinge that would affect the bottom 2/3 of the screen? I want to make sure I can adequately describe this to Apple when I reopen a trouble ticket on this problem.
    Thanks-
    John

    I am having the same issue on my Santa Rosa MBP (A1226).
    My computer is no longer under warranty and I was wondering if replacing the LCD panel (and not the entire display assembly which includes the hinge assembly, etc.) should resolve this problem.
    Thanks.

  • MacBook Pro Retina USB 2.0 devices not working in right side USB port

    4 days ago I bought MacBook Pro Retina 15".
    When I plug USB 2.0 device to right side USB port, it does not work. OSX does not recognize it, iPhone does not charge, and so.
    When I plug the same USB 2.0 device to left side USB port, it works.
    When I plug USB 3.0 device to left or right side USB ports, it works without a problem.
    Does anyone have this same issue? How did you resolve it?

    I have a similar issue with a 13" Retina. Both my ports work OK for most USB devices but the right one won't work with a USB external HD (Time Machine backup). Very consistant.

  • Touch pad not working on right side

    Hi I have been trying to get my printer to turn on and it is stuck on maintenance mode and my right side of the touch pad won't work is there a replacement for the touchpad or a way around mainenance mode?  
    This question was solved.
    View Solution.

    Hello @jgrier1, 
    Welcome to the HP forums.
    I understand that your printer is stuck on the maintenance mode and the touch pad is not responding.
    I would like to help.
    I'm sorry but the display on the Officejet 6500A Plus, is not a user replaceable part.
    Try going through the following document for the touchscreen.
    It may also get you past the maintenance mode issue.
    The Touchscreen Does Not Respond
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • MY IPHONE SCREEN HAS GONE SEPIA. The RIGHT SIDE OF THE SCREEN IS BLACK!

    Hello, my iPhone screen has turned sepia. No one say 'click the home button 3 times' or 'turn white on black off' because I have tried them!
    Basically on the right side of the screen there is a black part. About a quarter of the screen it fills.
    It is sepia too. It is really hard to see things. Also, say if i am on the home screen, then i open settings; the home screen would be in the background!!
    HELP!
    Here is a picture

    For an out-of-warranty replacement phone:
    149.00 USD
    =
    94.6872 GBP

  • Slideshow on Wallpaper not showing photos right side up

    I have 2,100 photos in IPhoto. I set up my Snow Leopard to show a slideshow as my Wallpaper. I went through my photos on IPhoto and used the Rotate function to make sure all my photos were right side up. However, when my Wallpaper is showing as the slideshow, some of the photos are still coming through not right side up. Any comments/help? New to Apple 2 months by the way!

    Having the same problem, anybody have an idea of how to fix?

  • I phone 6 screen shows bright colored line at right long edge

    My iphone 6 (space gray, 64 GB) shows some distorted colors (they vary) along the right long edge of the screen (facing it in normal orientation).
    Just want to know if this is an unusual problem; it's become more noticeable in the past 3 weeks, especially when info on screen has lighter colored background. Such as iTunes or App store...but not limited to those.
    It's not very wide (less than 1/8th inch) but I'm finding it distracting and want to know if it's a problem that can be addressed/fixed or I just need to adjust to it.
    It is viewable straight on or moreso if screen held even a bit angled (right side angled back).
    Thanks in advance.
    Howard

    NJpsychout wrote:
    Thanks for your reply.
    I got it at Target, where I doubt they'll be able to do much for me now; would going to the Genius Bar make more sense? Thanks again.
    H
    No I doubt anyone at Target would be much help. They would likely just send it away and say we'll call you when it's back. As suggested make an appointment at an Apple store and have them take a look at it. Don't forget to backup your data before going in.

  • Right side menu too small font size of letters in Windows 8.1 High DPI screen

    Hi, I just own a new laptop with Windows 8.1 and high resolution screen.
    When I start Adobe Reader, the document area seems to be readable, with "normal size fonts", but the options menú in the right side uses a very small fonts size and is hardly readable.
    I tried to change it using the Windows "change menu, title, icons size, but withpout success.
    Any solution for it?
    By the way, in a Lenovo Ideapad U430 Touch, there is not "magnyfying glass" combination key and the zoom function of the touch screen doesn't work either in that right side menu área (it works in the document area, not in the right side menu area).
    Any help will be welcomed.
    Thanks.
    Javier

    Hi, Pat, test done.
    Thanks for your suggestion, it was somehow helpful, or, let say, half and half.
    It was helpful in the way that when I opened the preferences Windows I was not able to see the full window, there was a part of the right side of the window that was out of the screen. So, when I changed the "scaling settings options and behaviour" from "Auto" (default value) to 100% everything was in the display.... So, this was of high help.
    BUT I was not able to find any way in all the suggested document for making the fonts used in the right window of the Adobe Reader, the one where the "Tools" and "Comments" menus are displayed more readable, bigger size, than the one that the product uses by default in the High DPI display.
    So, thanks for the suggested document that helped to solve the first point.
    BUT
    Any other idea that could help for changing the fonts used in the "Tools" or "Comments" menu window?
    Thanks and kind regards.
    Javier

  • Menu bar flashes on the right side of the screen

    My menu bar on the right side of the screen started flashing after the latest updates from Apple. I haven't changed any settings - just started flashing at various times.

    The menu bar is at the top of the screen, not on the right side. Is that what you mean?

  • The screen no longer displays a playlist column and when I hit the plus sign the screen no longer has a right side column to let me make a new playlist. Now what?

    The screen which comes up no longer displays a playlist column and when I hit the plus sign and choose new playlist the screen doesn't display the narrow right side column for a new playlist. Does this have something to do with the new iTunes version I installed?

    iOS: Unable to update or restore

  • The left side of my display/screen is darker than the right side.

    Running a 27 inch, Mid 2011 iMac.   Left side of screen is obviously darker than the right side.  Any one else have this happen?  Any solutions?

    Please make a Genius Appointment and take it in for service. Either the display is bad, the GPU has failed, or the display backlighting has failed.

  • How do you populate right side of Shuttle control

    Hi,
    I am trying to use shuttle control. I am not sure how to populate the right side of the shuttle control from database. I am using the following code. But, it is not populating the right side. In this code, P35_COUNTRIES is my shuttle. P35_X is a text field just to test the output. I can see an output 5:8:9 in the text field. But, my shuttle right side is empty. Am I doing something wrong here ? I would really appreciate any suggestions.
    DECLARE
    vCountries VARCHAR2(100);
    vSEP VARCHAR2(1);
    BEGIN
    :P35_X := 'Inside test';
    vCountries := '';
    FOR C IN (SELECT country_id FROM countries WHERE territory_id = 1)
    LOOP
    vCountries := vCountries || vSEP || c.country_id;
    :P35_X := vCountries;
    vSEP := ':';
    END LOOP;
    :P35_COUNTRIES := vCountries;
    :P35_X := vCountries;
    END;
    Thanks

    Hi,
    Yes, it is getting populated: [http://apex.oracle.com/pls/otn/f?p=30879:5]
    My Source settings for the shuttle ("P5_SHUTTLE") are:
    Source Used: Only...
    Source Type: Static Assignment...
    Source Value: (Blank)
    Post Calc Computation: (Blank)
    Default Value: (Blank)
    List of Values Definition: SELECT DNAME d, DEPTNO r FROM DEPT ORDER BY 1
    Settings for my Computation for this item:
    Item Name: P5_SHUTTLE
    Type: PL/SQL Function Body
    Computation Point: Before Header
    Computation:
    DECLARE
    vDEPT APEX_APPLICATION_GLOBAL.VC_ARR2;
    i NUMBER := 1;
    BEGIN
    FOR c IN (SELECT DISTINCT DEPTNO FROM EMP WHERE ENAME LIKE 'A%')
    LOOP
      vDEPT(i) := c.DEPTNO;
      i := i + 1;
    END LOOP;
    RETURN APEX_UTIL.TABLE_TO_STRING(vDEPT);
    END;This computation is unconditional, so runs everytime the page is loaded.
    Andy

Maybe you are looking for