Screen exit Delivery note

Hi,
When I do VL02N I want to block some item-fields for change (make them grey) when they have a certain item-category.
So, when I want to change a delivery I want to make sure that the user cannot change f.e.g. the quantity of the line that has the specific item category.
I did this already with sales order and found a exit for it (exit in enhancement V45A0003) but I can't find anything for deliveries .. can someone help me ?
Thanks !

User exits for the Development class (VL) for Delivery..
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of stock for POs for shipping due date list
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)

Similar Messages

How to Transport a Screen Exit

Hi All,
I have created a Project in CMOD which has a Funciton exit and Screen exit. Now i have saved all the thins including Project, Funciton Exit in Dev. Class under a Request. But i am not able to save the Screen exit in Dev.Class. it is getting saved in $TMP. So when i transported the Request project along with Funciton exit are transported but screen exit is not transported. So how can i transport the Screen exit.
Kindly Reply, it is very Urgent.
Thanks in Advance,
Subhani.

Hi,
I am unable to save the screen exit in development class due to the following reason.
In SE51, if we go the the GOTO menu -->Object directory entry, we can see a popup.
In the top of the popup there will be a line with Object R3TR FUGS XES60(Say).
then goto Transaction SE10>GOTO menu>Transport Organizor Tools>Object directory entry>Change object directory entry.
Under this i entered FUGS and XES60. Then i saw that the standard package EE01 in which Screen exits exits was in locla object.
Then we removed the standard package from local object. Then we are able to save the screen exit in a development calss and able to transport.
Regards,
Subhain.

To add screen exits to a existing transaction ( Purchase order) - ME33k

Hi,
Can anyone tell me whether how to add screen exits to a particular transaction
Transaction - ME33k.
I need to add a screen to the existing transaction, so how do i do that
can any one suggest me the way
i know the BADI which can be used for the same
ME_PROCESS_PO
ME_PROCESS_PO_CUST
GOS_SRV_SELECT
but can anyone suggest me a better so as to how to implement them !
thanks,

Hi
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data. It is determined be SAP where the sub screen will be displayed. The syntax is: CALL CUSTOMER-SUBSCREEN The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project, and the project has been activated. Note: Function codes are only processed in the main screens flow logic You are not allowed to enter a name for the subscreens command field You are not allowed to define GUI stauses You are not allowed to enter a value for Next screen The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules. These function modules belongs to the same function group as the subscreen Subscreens are edited with transaction CMOD. When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next time you display the calling screen The developer must create the subscreen and the corresponding PBO and PAI modules How to identify screen exits Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify. Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits MENU EXITS Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu. Function codes for menu exits all start with "+" Example We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will run report ZTEST. Goto transaction SE43 Area Menu Maintenance In Area Menu Paramenter type 'S000' (S triple Zero) Select Change and ignore all the warning screens Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function" Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01 Goto transaction SE93 and create transaction +C01 that calls report ZTEST. Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear. USER EXITS User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module. The naming standard of function modules for functionmodule exits is: EXIT_<3 digit suffix> The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix> Example: The program for transaction VA01 Create salesorder is SAPMV45A If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits): CALL CUSTOMER-FUNCTION '003' exporting xvbak = vbak xvbuk = vbuk xkomk = tkomk importing lvf_subrc = lvf_subrc tables xvbfa = xvbfa xvbap = xvbap xvbup = xvbup. The exit calls function module EXIT_SAPMV45A_003 2. How to find user exits Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter. You will now come to a screen that shows the function module exits for the exit. 3. Using Project management of SAP Enhancements We want to create a project to enahance trasnaction VA01 Go to transaction CMOD Create a project called ZVA01 Choose the Enhancement assign radio button and press the Change button In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is allready in use, and error message will be displayed Press Save Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit. Now the function module is displayed. Double click on include ZXVVAU04 in the function module Insert the following code into the include: E_KUNNR = '2155'. Activate the include program. Go back to CMOD and activate the project. Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155" Please check if the thread given below would be of any help. http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/menu-exits-72696# http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction

Menu Exit & Screen Exit Implementation Step by Step Implementation Needed:

Hi Experts,
I am in need of how to implement Menu Exit and Screen Exit using a simple
example.If any step by step implementation through snapshots were it will be
helpful instead just some links that doesn't work after some steps due to version
changes or not proper steply explanations.Points will be rewarded accordingly.
Thanks for your help in Advance.

Hi Sudha,
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project, and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules. These function modules belongs to the same function group as the subscreen
Subscreens are edited with transaction CMOD. When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Please check if the thread given below would be of any help.
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/menu-exits-72696#
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
Regards
KK

Screen exit-user exit- menu exit.

What are these and what is the difference?They look so similar.
Help me to differentiate please.
Points guaranteed man.
Nik

Hi Nikhil,
I am giving you a part of a document.
Hope it helps.
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project, and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
 You are not allowed to enter a name for the subscreens command field
 You are not allowed to define GUI stauses
 You are not allowed to enter a value for Next screen
 The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules. These function modules belongs to the same function group as the subscreen
 Subscreens are edited with transaction CMOD. When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next time you display the calling screen
 The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
 Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
 xvbak = vbak
 xvbuk = vbuk
 xkomk = tkomk
importing
 lvf_subrc = lvf_subrc
tables
 xvbfa = xvbfa
 xvbap = xvbap
 xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
 Create a project called ZVA01
 Choose the Enhancement assign radio button and press the Change button
 In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is allready in use, and error message will be displayed
 Press Save
 Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
 Now the function module is displayed. Double click on include ZXVVAU04 in the function module
 Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
 Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Regards,
Suruchi

Screen Exit for PR

Hi,
     I want to add screen for the standard transaction me51n.
so my scenario is ..
release code            description          releaseoptions
     c1                   costcenterappr1         x
     c2                   costcenterapp2          x
so i want to add extra tab i.e for the approvers
release code       description          releaseoptions     approvers
     c1              costcenterappr1         x                       ram
     c2              costcenterapp2          x                       manju
so like this i want to add extra tab(approvers) for the transaction me51n.
i have checked the exit - mereq001. But the screen exit is not working. Is tere any chance to add this tab.
Regards,
chandu

Hi,
keep in mind that the custom-data exit with XM02 is working on line-item level.
To add a new tab in the header section of the requisition you'll need to enhance the enjoy layout-manager.
Best wishes,
   Florin

Menu Exit and Screen Exit

Hi PPL,
Can anybody help me out in explaining me how to find a menu exit or the
Screen exit in a program...I have an requirement where i need to use both of them..
I have already posted this query , but people responded with links which had the
information on these two , but not the way to locate these...
I ll be very grateful for ur advice.
Regards,
Kevin Nick.

hi kevin
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project, and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules. These function modules belongs to the same function group as the subscreen
Subscreens are edited with transaction CMOD. When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
regards
ravish
plz reward points if helpful

Enhancement - Screen exit

Hi All,
Requirement is to add couple of fields in Standard transaction.
Please let me know the steps of finding the Exit and development steps.
Thanks in advance.
Ravi

Hai Ravi
User Exits
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project,
and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules.
These function modules belongs to the same function group as the subscreen Subscreens are edited with transaction CMOD.
When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next
time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu
entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule.
The code for the function module is writeen by the developer. You are not writing the code directly in the function module,
but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements.
Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only
be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Have look at this links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
http://www.sapgenie.com/abap/ole.htm
http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
User Exist Finding
Go to se93 and give the tcode to find the main program associated to it.
Go to se38 and give the main program.
Find the package associated to it.Go to->Object Directory Entry.
Go to smod transaction.
Press f4.
Press Information System Button.
Give the Project(Dev Class).
Press enter.
Find the enhancements associated
User Exist System Tables
1. MODSAP & MODSAPT is the table.
2. Where we can give the enhancement name.
3. Component type will be E
for getting the FMs.
E Function exit
S Screens
T Tables
C GUI code
Field Exist Creation
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
- Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
- An easy way to determine the data element associated to a particular screen field is to:
Go the appropriate screen.
Position the cursor in the appropriate field.
Press F1 for field-level help.
Click on the Technical info pushbutton (or press F9) on the help dialog box.
On this Technical Information dialog box, the data element will be specified if the field is 'painted' from the ABAP/4 Dictionary.
Step 2: Go To Field Exit Transaction
- The transaction to create field exits is CMOD.
- You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
- From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
- After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
- From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
- After choosing this menu path, a dialog box will prompt you for the appropriate data element .
- Enter the data element name and click the Continue pushbutton.
- Now, you will be able to create the function module associated to the data elements field exit.
Step 4: Create Function Module
- You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the Continue pushbutton.
- In the Function module field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
- You can add an identifier (an underscore followed by a single character ).
- The first function module for a data elements field exit must be created without an identifier.
- To create the function module, click on the Create pushbutton, choose menu path Function module -> Create, or press F5.
- After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing Enter, you will be able to go ahead and create the function module.
- Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
- From the function modules attributes screen, click on the Source code pushbutton or choose the Goto -> Function module menu path to the code of the function module.
- Here you will add your desired functionality for the field exit.
- Remember that field exits function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
- You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
- After coding the function module, you must remember to activate it.
- Use the Function module -> Activate menu path to activate the function module.
- At this point, you can return to the field exit transaction.
- You should be able to 'green arrow' back to this transaction.
- When you return to the field exit transaction, you will see an entry for the newly created field exit.
- At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
- Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
- This step is only needed if you want to make a field exit local.
- To make a field exit local, select the field exit and click on the Assign prog./screen pushbutton.
- In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
- In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the Fld. Exit field.
- If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
- If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
- The field exit must be active for it to be triggered by the system.
- Activate the field exit by choosing the Field exit -> Activate menu path.
- After assigning the field exit to a change request, its status will change to Active and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Thanks & regards
Sreenivasulu P

Fields not greyed out in display mode in screen exit

Hi all,
i am working on an screen exit for CJ02 transaction. the values in the customer subscreen are getting updated in database and even it is reflecting in fields when viewed again. the problem is that in display mode (CJ03) the fields are still editable. though there is no save button, but the fields should be greyed out.
i have tried to modify screen using LOOP AT SCREEN in the function exit provided in PBO.....but it is not picking the subscreen.
please provide any solution as soon as possible.
thanks in advance

In the PBO in your screen exit:
IF sy-tcode EQ 'CJ03'.
LOOP AT SCREEN .
if screen-name 'your field'
screen-input = 0.
screen-output = 1.
MODIFY SCREEN.
ENDIF.
endif.
what enhancement are you using?
bye

ERS user exit, pass Delivery note(LFSNR) in MIGO to Reference(XBLNR)in MIRO

Hi Experts,
I need to assign Delivery Note(LFSNR) in MIGO, to field Reference(XBLNR) in MIRO. that means "Reference " field must contain the delivery note information instead of Invoice doc number.
how can i use component MRMH0001.where can i use?
i am new to user exits.
please help me. i need logic and steps.
Thanks in advance
Reward points will be given.
Srinu

hi
Overview
R/3 provides three "customization spots" that allow you to enhance FI/CO features without modifying the standard code. Although often collectively referred to as "user exits," two of the three have different names. SAP Enhancements are used to expand the standard functionality within SAP. Enhancements use function modules and are called from the standard SAP code. Each module in the system has a set of delivered enhancements that help companies expand the standard functionality where they need it. Enhancements were new in release 3.0.
The Open FI Interfaces or Business Transaction Events are also used to expand the standard functionality within SAP. These events are defined in the IMG. Business Transaction Events were new in release 4.0. They are not available for all modules and are not called on all integrated transactions into FI as of release 4.5B. This will change with each release and should be retested.
The older User Exits in FI/CO are "Z" programs that are defined in table T80D for client-dependent user exits, and in table T80I for client-independent user exits. These are also used to expand the standard functionality within the FI/CO modules. These User Exits have been available since the early releases of SAP. All of these FI/CO User Exits are listed in this document in the Configuring User Exits (Older). The list is included because these User Exits are not a part of the Enhancements or Business Transaction Events and do not have an Info System for searching.
Benefits
Standard SAP functionality can be enhanced without modification to the standard code.
Upgrades do not erase the functionality and it does not have to be re-transported or re-entered into the system. The enhancements should be thoroughly tested when upgrading to ensure the system will still work as implemented.
Configuring SAP Enhancements
Basic Steps in Configuring an Enhancement
Find the appropriate Enhancement.
Enter the ABAP code in the "Z" program within the function module.
Create a project.
Add the Enhancement to the project.
Activate the project.
Example Business Scenario for Enhancements
Company A has a requirement to validate all customer master records created with a U.S. address. The U.S. entity reports on the industry field on the customer master. This is only a U.S. requirement and should not be required for the other countries, so the field status would not work. To accomplish this requirement, Company A will need to set up an Enhancement for the customer master transaction. The necessary steps are detailed below with screenprints. This example was configured in a 4.6C system.
to find the suitable exit for ur requirements check the following program
Hi
Find the available exits with the following program:::
*& Report ZFINDUSEREXIT
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
write the code in the right form and check by keeping a break point
HI
To search for a badi, go to se 24 display class cl_exithandler.
double click on method get_instance, get a break point on case statement.
execute and start the required transaction in new session.
look for variable exit_name. It would show the available badi's.
also check the following links
User Exit
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
Please do reward if useful
Regards
Dinesh

MM - User exit to validate delivery note number

Hi everyone,
pls. I need help to find the user exit just to validate the delivery note number during MIGO.
Thanks a lot !
Regards.

>
Himanshu Verma wrote:
> Hi
> Try with BADI: MB_MIGO_BADI Method PAI_HEADER> structure GOHEAD >LFSNR
>
> regards,
> Himanshu
himanshu,
istead of throwing any badi, bapi, enhancement or exit at such a question ... have you ever tried to ask yourself whether you are inventing the wheel again (and for the umptiest time) ... because maybe the solution lies in configuration? how can you come up with a BADI without knowing the process?

P.O change if i change only screen exit field the data is not saving

Hi ,
In the purchase order header custom tab i am added a screen exit field .In the purchase order creation mode the screen exit field is saving.But in the change mode if i am changing only the screen exit field then it is showing as 'no data to save' and not saving .But at the same time if i am changing some standard field with the screen exit field then both the field is saving.
I have to activate any field to save the screen exit field.Please let me know any exit to be activated for saving the data.
With Regards,
Ambrose

Hi
Pls keep a break-point in the PAI of Screen exit and check, whether it stops in change mode
Regards
Madhan D

User exits for delivery note vl02

i want to add some field in delivery note at item level susch as no of package per item for this which user exits i use

Hi,
to find the user exits & Badi's for the T-code..
go to table TSTC>enter T-code and execute> get the Program for the t-code..
and go to-se38-->get the package attached to the t-code..
next go to t-code Se15>expand the enhacement tab>enter package under userexit and
                                                     execute you will get the list of exits
                                                     available...
                                                  -->enter package under Badi's tab and
                                                     execute you will get the list of Badi's
                                                     available...
All the User exits are stored in Table MODSAP..
Prabhudas

Add ordered quantity to delivery note idoc desadv01 with user exit

Hi,
I am using the IDOC DESADV01 to output electronic delivery info when a user PGIs on a delivery note.
The problem is I need some extra data like the original order qty, this exists in field VBAP-KWMENG
So I think I would need to extend the idoc and do some kind of user exit to populate the value into the new idoc field.
Unfortunately I have no experience with this, can anybody advise if its the correct way and how to get started?
With thanks
Rob.

I apologies our system is totally different based on that I suggested.
But current I guess you have to extend idoc.
Below link is helpful for extending idoc.
Let me know if still if you face any problem.
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi.jhtml
Thanks,
Narayan

User exit for Delivery note in MIGO transaction

hi friends,
Basically i am MM Functional ,so please guide me how worte user exit in SAP system . if any body face this same issue pls put progrmme and where it placed
In case we enter the duplicate delivery note from the same vendor in the same physical/financial year, should get error/warning message
In MIGO delivery note not accpeted repeted DC numbers
Use MBCF0002 Customer function exit: Segment text in material doc. item
EXIT_SAPMM07M_001 to give ur coding for duplicate delivery note entry and chk.
Field name i_mkpf-xblnr for delivery note number

>
sivasankar cherukuri wrote:
> hi friends,
>
> Basically i am MM Functional ,so please guide me how worte user exit in SAP system . if any body face this same issue pls put progrmme and where it placed
>
> In case we enter the duplicate delivery note from the same vendor in the same physical/financial year, should get error/warning message
>
> In MIGO delivery note not accpeted repeted DC numbers
>
> Use MBCF0002 Customer function exit: Segment text in material doc. item
>
> EXIT_SAPMM07M_001 to give ur coding for duplicate delivery note entry and chk.
>
> Field name i_mkpf-xblnr for delivery note number
Go to TCode CMOD and select an existing project / create a new project.
Select enhancement assignment and give the name EXIT_SAPMM07M_001
Save the change.
Then enter again and double click on the name provided above. Inside there will be an INCLUDE ZX*****
Double click on that include, the system will ask to create a program. Accept it.
Now you have the open field to make your validation.
Regards,
Aroop

Screen exit Delivery note

Similar Messages

Maybe you are looking for