Screen exit in SAPMM06E

Hi everyone,
I'm working as an ABAP-developer since a few weeks, so I still have a lot of things to learn. At the moment, I'm trying to get a screen exit to work. I created a project, activated the screen exit, activated the user exit that is linked, but now I want to transfer data from the 'original screen' to the screen from my screen exit.
It is screen exit 311, user exit exit_sapmm06e_016.
I tried to search for relevant topics on the forum and on the help, but I'm still confused on how to transfer data...
Thanks in advance !!

Hi Sid,
I think it's easier for you when you post your question in a new thread. That way, everyone knows there's a new question.
Concerning your question : This wasn 't (yet) part of my problem, so unfortunately, I cannot help you...
KR
Björn

Similar Messages

How can i add field to screen exit ?

ver 4.7
trans. me21n
add field in screen exit .
i implement screen exit MM06E005->SAPMM06E->0111
in the layout i try to add field by pressing
button in the toolbar ( dictionary field window ) ,
but when i press "save" in me21n ,
i get message "No data changed".
i choose in the dialog window
field from structure "ci_ekpodb" , field that i already
been add .
thanks .

Hi
You have to implement the exit to import/export the data into/from screen-exit:
EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
Max

Updating Ekpo by adding item level Screen Exit

Hi,
I added 2 fields at the item level of the ME21N Screen using the following screen exit.
( SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item. )
Now I just want to update EKPO table.,. How to proceed. any body know guide me.
Thanks & Regards.
Balajee.J

Hi Mou,
In this there are four methods
1)ACTIVATE_TAB_PAGE
2)TRANSFER_DATA_TO_SUBSCREEN
3)TRANSFER_DATA_FROM_SUBSCREEN
4)PASS_FCODE_TO_SUBSCREEN
In thw first method pass the tabname,screen no,position all.
fcaption = 'C Form Details'.
fprogram = 'Z_VLO1N_HEAD'.
fdynpro = '0200'. This is the screen created and kept all custom fields
Here you the concept set and get data and move and get the values.
TRANSFER_DATA_TO_SUBSCREEN
set PARAMETER ID 'Z' FIELD f_vbrk-ZCF.
TRANSFER_DATA_FROM_SUBSCREEN
get PARAMETER ID 'Z' FIELD fvbrk-ZCF.
Pass all these parameters it will resolve your issue.Check and post if need help.
Regards,
Madhu.

Doubt in Screen Exit SAPMM06E

HI All.
I added one input field as reasons for Order (referred EKPO- BSGRU) by Screen exit SAPMM06E of the Enhancement MM06E005.Now I have to update this value in table EKPO- BSGRU. Where have to do the code? How?
Thanks in Advance
Regards.
Jay

Hi,
generally you should not be able to change this field using enhancement SAPMM06E. Have a look at documentation of this enhancement in SMOD. There is written:
You cannot:
o   Change standard fields
You can try to cheat and use trick with ASSIGN to change value of the field EKPO-BSGRU but you have to be careful. You don't want to create any inconsistencies. You need to identify name of the program and variable where the field BSGRU is stored and then access it via field symbol.
Example:
* FM called from XD01. Get name
      ASSIGN ('(SAPMF02D)KNA1-name1') TO <name>.
      IF sy-subrc EQ 0.
        MOVE <name> TO l_name1.
      ENDIF.
Once again, it is not officially supported and you can create lots of troubles. Maybe you should look for better user exit.
Cheers

Purchase order screen exit SAPMM06E,screen number 0111

Hi
I am working on purchase order screen exit SAPMM06E and screen number 0111
i am able to see customer screen in transaction but program control is not going to flow logic
due to that i couldn't able to fetch data into custom fields.pls suggest me wat to do.
Thanks & Regards
Vinay

Hi Vinay ,
I think you are implementing the screen exit with the enhancement component 'MM06E005'.
if thats the case you add your fiels in the screen area provided
in the screen 'SAPMM06E' 0111 by creating the subscreen in the SE51 with the name space 'SAPLXM06' 0111 with then will be reflected (fields added) in the ME21n transaction .
You have to write your logic in the EXITS provided in that enhancement component
You have to write your logic in the exit 'EXIT_SAPMM06E_008'
as it imports data from screen field which you placed in the tcode.
Revert back to me for any queries.
Reward points if useful.
Thanks ,
Surya Pydikondala.

Screen exit of Po header

Hello Friends ,
I have added new tabstrip in PO header with two new fields which are appended to Ekko table by append structure.
1) When creating the PO, the changes to these new fields are not getting updated into Ekko table
2) After doing the changes to these new fields in Me22n, if i am trying to save the Po it's giving the information message 'No data changed' and the changes to these new fields are not getting updated in Ekko table.
Could you please advice me regarding this problem.
Thank's in advance,
Arvind.

Hello Friends,
The screen exit is shown below ,here in 101 screen i have added two new fields
SAPMM06E                       0101 CUSTSCR1 SAPLXM06                       0101
To update the new fields in the new tab strip , i have written the code in the user exit of PO header (EXIT_SAPMM06E_006) as shown below.
Note:The two new fileds are check boxes ,depending on some conditions we need to mark the check boxes.
TABLES:CI_EKKODB.
if not I_LFM1-ZZINTLIF is initial.
CI_EKKODB-ZZINTLIF = I_LFM1-ZZINTLIF.
endif.
IF ( I_EKKO-BSART = I_LFM1-ZZEDIBSART1 ) OR
     ( I_EKKO-BSART = I_LFM1-ZZEDIBSART2 ) OR
     ( I_EKKO-BSART = I_LFM1-ZZEDIBSART3 ) OR
     ( I_EKKO-BSART = I_LFM1-ZZEDIBSART4 ) OR
     ( I_EKKO-BSART = I_LFM1-ZZEDIBSART5 ) .
    CI_EKKODB-ZZEDI = 'X'.
ENDIF.
But these two new fields i.e. ZZINTLIF and ZZEDI are not getting updated in the table Ekko and the changes are not reflected on screen also.
Please help me regarding this issue.
Thank you,
Arvind.

Screen Exit for ME23n.

Hi Gurus,
I hace created a project in CMOD for adding a tab in the header data.
The screen exit used is the following:
SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101
can anyone guide me as to which runtime structure has the same when i am doin ME22N.
Best Regards,
Navin Fernandes.

Hi, NAVIN
You can find these fields in Structure EKKO, I_EKKO
Thanks and Regards,
Faisal

Change log data is NOT captured for PO screen exit fields

Hi,
We created a new tab at item level for PO Screen(ME21N) for the purpose of STOs(Document Type UB) & created 3 New fields in that new tab through Screen Exit( SAPMM06E, SAPLXM06 0111 ).
When we are entering data in those 3 new fields while creating new STOs, those data are captured in EKPO table.
When we are changing the OLD STOs for those 3 new fileds, data is modifying in EKPO table. But changes are NOT inserted in CDHDR and CDPOS table for those 3 new fields.
<b>Please help us to track the changes in those 3 new field data changes for old STOs.</b>
Please let me know if you need any further clarification regarding this.
Thanks & Regards,
Mani.

Hai Naimesh Patel,
      Thanks for your promptly reply.
      Now My issue has been resolved successfully with your help.
      I rewarded Points for your reply.
Thanks & Regards,
Mani.

Runtime error in MIRO while using User/Screen exit

Hello,
I have implemented an exit in ABAP for MIRO which when transported to Quality server through runtime error.
I have used EXIT (SMOD) : LFDCB001 which contains FM -> EXIT_SAPLFDCB_001 and include -> ZXM08U31. In this exit I have written my code to disable Inv. Party field. This field exist in Details Tab in Miro Transaction.
Location of the field: MIRO -> Details (tab) -> Inv. Party (Field)
Code written in include ZXM08U31 is:
LOOP AT SCREEN.
IF screen-name = 'INVFO-LIFRE'.
    screen-input = 0.
    MODIFY SCREEN.
ENDIF.
ENDLOOP.
This exit is assigned to a project in CMOD and I tested the same in Development system. It is working perfectly.
Now I transported the TR (Includes program ZXM08U31 and Customer enhancement projects ZMIRO). Now when I run MIRO in quality server it triggers the my logic and then through runtime error.
Runtime error says:
Short text
    Dynpro does not exist
Error analysis
    The system attempted to use dynpro 0400 in program "SAPLXM08".
    This dynpro does not exist.
I agree that screen 400 does not exists in program for MIRO but it does not exists in development system as well. So if the runtime error is valid in QEC server then why not in DEV server. And when it can run successfully in DEV server why cant it run in QEC server.
Hope I have explained all the things in detail.
Please provide me the solution since user can bombard anytime for the MIRO dump everytime in QEC.
Regards,
Harjeet Grover

Hi Harjeet,
Reason of your Dump is that the enhancement "LFDCB001" which you used contains one Function module exit "EXIT_SAPLFDCB_001" and another one screen exit in calling screen "SAPLFDCB" number 0150.
So when you activate your project these above mentioned both components were activated.
So when you execute transaction SAP looks for called screen "SAPLXM08" No-0400 but as you havn't created and program go for DUMP.
Solution - Just Create called screen "SAPLXM08" No-0400 and activate.
Thanks,
Vijay

How to find out a screen exit

hi seniors
can any one tell me abt screen exit n thier search.
pls hurry
points will be rewarded
offer valid for today only.
Sameer

hi,
How to Find a Screen Exit in a Given SAP Standard T-code
Program
REPORT YSMOD2 .
TABLES: MODSAP, MODACT, TSTC.
PARAMETERS: INPUT1 LIKE TSTC-TCODE DEFAULT ' ',
            INPUT2 LIKE MODSAP-TYP DEFAULT ' '.
DATA: SEARCH1(6),
      SEARCH2(3),
      SEARCH3 LIKE MODSAP-MEMBER.
DATA : FIRST_ROW VALUE 'Y'.
CONCATENATE: '%' INPUT1 '%' INTO SEARCH1,
'%' INPUT2 INTO SEARCH2.
SELECT * FROM TSTC WHERE TCODE LIKE SEARCH1.
FIRST_ROW = 'Y'.
CHECK TSTC-PGMNA NE SPACE.
CONCATENATE '%' TSTC-PGMNA '%' INTO SEARCH3.
SELECT * FROM MODSAP WHERE TYP LIKE SEARCH2
AND MEMBER LIKE SEARCH3.
SELECT SINGLE * FROM MODACT WHERE MEMBER = MODSAP-NAME.
IF FIRST_ROW EQ 'Y'.
   WRITE: /0 TSTC-TCODE, 6 TSTC-PGMNA, 16 MODSAP-NAME, 32 MODSAP-TYP,
          45 MODSAP-MEMBER, 70 MODACT-NAME.
   FIRST_ROW = 'N'.
ELSE.
   WRITE: /16 MODSAP-NAME, 32 MODSAP-TYP, 45 MODSAP-MEMBER, 70 MODACT-NAME.
ENDIF.
CLEAR : MODSAP, MODACT.
ENDSELECT.
IF SY-SUBRC NE 0.
   WRITE : /0 TSTC-TCODE, 6 TSTC-PGMNA, 30 'No exits found'.
ENDIF.
CLEAR TSTC.
ENDSELECT.
END-OF-SELECTION.
CLEAR: SEARCH1, SEARCH2, SEARCH3.
Regards
Sudheer

Creation of sales order- screen exit

Hi all,
I have a requirement like while creation of sales order need to develop one screen field in additional data B.i developed that field. and now while creation of sales order it will save in vbak table. now the problem is that screen field will be enable in that particular sales order type only otherwise it will be disable. how to do this. screen exit.

Hi
See SAP Note 209278 - Display of customer-specific fields in sales doc
Check also, SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B' and SAP Note 386694 - Additional data not displayed in screen 8459 and 8309
Regards
Eduardo

Screen-exit for profit center creation - transaction KE51.

Hi All,
Background: The client has the requirement of importing profit centre master data from legacy system into SAP ECC system. Few of the legacy data could not be filled into existing sap fields, hence the requirement has been to populate the data into custom fields.
The client also has the requirement, that the same fields are required during online entry. For this we need to enhance the profit centre creation screen (transaction code KE51) with two additional custom fields.
Requirement: To enhance profit centre creation screen with custom fields. Screen-exit for KE51 transaction.
Pre-work: Program SAPLRKPM in SAP ECC system is the main program. It does not have any screen or sub screen area for custom fields addition. Debugged the program to check for screen-exits, found none.
Below user-exits are not either screen-exits or cannot be used for enhancing profit center screen.
PCA00001 EC-PCA: Document changes for data transfer
PCA00002 Profit Center Accounting: derivation of representative mat.
PCA00003 Derive Partner Profit Center for External Deliveries
PCA00004 Check valuation for invoice verification with transfer price
PCA00005 Check valuation for invoice verification with transfer price
PCASELEK EC-PCA: Selection criteria for data transfer
Solution required for: Could anyone please let me know if it is possible to enhance the profit center creation screen. If yes, please provide the names of the screen-exit/ badi exit.
(Just a thought, modifying the standard seems to be the only solution, this should be the last option and i agree, please provide your inputs.)
Thanks in advance.
Warm Regards,
Goutham.

Thank you Manohar for the response.
The requirement is to display custom fields on standard sap screen and there are no screen-exits. So, i suppose the standard screen has to be modified.
Could you please provide brief explanation on
May be you should consider maintaining custom mapping table instead of going for chaning standard.
With Regards,
Goutham.

Screen exit/BADI for adding custom field in IW31/IW32

Hi all,
The requirement is to add the permit field in the Header component of IW31. Searched SDN and found user exit IWO10018 for the same which includes a screen exit.
The activation of the same is adding a tab in the screen while user wants the field under header Component tab.
How this can be done. Any suggestion.
Thanks
anya

Hi,
You can perform append structure to add your custom field(s)in VBAP table. Next step, go to SE51 (Screen Painter)to modify SAP Program SAPMV45A Screen number 4459 for Additional data A or Screen number 8459 for Additional data B to add your append structure custom fields.
Once the above steps done, you can place your logic to populate custom fields in include program MV45AFZZ. i.e USEREXIT_MOVE_FIELD_TO_VBAP.
At the end, please ensure all program and screen are activated. Hope this will help.
Regards
Kiran Sure

Fields not greyed out in display mode in screen exit

Hi all,
i am working on an screen exit for CJ02 transaction. the values in the customer subscreen are getting updated in database and even it is reflecting in fields when viewed again. the problem is that in display mode (CJ03) the fields are still editable. though there is no save button, but the fields should be greyed out.
i have tried to modify screen using LOOP AT SCREEN in the function exit provided in PBO.....but it is not picking the subscreen.
please provide any solution as soon as possible.
thanks in advance

In the PBO in your screen exit:
IF sy-tcode EQ 'CJ03'.
LOOP AT SCREEN .
if screen-name 'your field'
screen-input = 0.
screen-output = 1.
MODIFY SCREEN.
ENDIF.
endif.
what enhancement are you using?
bye

Add one column to the screen exits

Hi All
I am doing Screen Exits,
here i have to add one column to the screen
and it have to retrive the data from the specified fields
anyone plz give me the solution.

Hi
which screen exit?
Max

Screen exit in SAPMM06E

Similar Messages

Maybe you are looking for