Screen extreme brightness after waking up from standby

Hello. I couldn't get a screenshot to show this issue. After 5.1.1 when waking up phone the brightness of screen is exceedingly bright, then dims down after about 3-5 seconds after or if screen is touched.
What's gives? No root, x reality is off. I loved this phone on kitkat, been horrible after 5.0.2 and 5.1.1.

Hey, I got a fairly new z3c and the same issue.
After the update the brightness is somewhat messed up. I did a backup and reset my phone then did the update so I think this is not something you could just repair yourself.
I got the music widget on my screen and you can see that the brightness even exceeds the normal maximum settings and really distorts colours.
This should get some attention and bet fixed

Similar Messages

Screen stays off after wake up from standby

So this happens most often when I have an external display connected, but has happened otherwise to me and my friend who has identical macbook.
usually, I'll connect the external display, then shut the screen on the macbook, then wake the macbook with an external mouse or keyboard, and use the macbook with the external display. When I'm done and want to disconnect the external display, i'll unhook it, and then open the screen on the macbook. when I open the screen, the standby light (the one that pulsates when in standby, and stays bright when screen is off and computer is not in standby) turns off, signifying that the computer has woken and the screen is running, but the screen remains off. the function keys for volume or contrast make nothing appear on the screen, and it is completely off, rather than just showing a black screen. if I shut the screen when this is happening, the standby light turns back on, and upon opening screen again, the standby light turns off again, but still, no display. it seems the only way to alleviate the problem is to hold the power button for 5 seconds. I've tried resetting the pram, and everything else you can reset upon booting, as well as doing the thing where you take the battery out, disconnect power, and hold power button for 7 seconds. nothing stops it from happening.
If i open the screen before disconnecting the external display, it usually works fine, but sometimes it happens without an external display ever being present.
any ideas?
-Tim

I use a dual monitor system at work all the time. The best thing to do is to disconnect the second monitor while your computer is still awake and open. It doesn't like it when you put it to sleep and then disconnect. It's probably like putting toothpaste in the ear of your best friend when he's drunk and passed out. Then when he wakes up he wonders why he can't hear out of one ear.

Blue Screen of Death \ No screen or response after waking up from sleep\hibernation

Hey, i have Yoga 2 Pro, Windows 8.1 64x,
All my drivers and BIOS are up to date (Latest version from lenovo's Y2P support drivers downloads or even newer)
i have an active anti-virus (avast free) and i have these issues since day 1 with this PC.
The issue is like this,
After booting the PC from scratch everythin is perfect, and also while it runs,
the problems starts when i'm closing the lid, it's like a **bleep** russian roulette...
about 10-25% of the times i'm opening it back up i'll have one of these two issues:
The keys backlight turns on but the screen stays of, the blinking of the power button stops and it's like the pc should be on, but the screen is off and nothing makes it turn back up, the vibration of the windows key under the screen works but it does nothing. the solution is to press the power button and restart the computer.
Everything turns on, keys backlight turns on and screen turns on and shows my windows 8.1 lock screen, but after less than a secon the computer freezes, nothing responds, and about 5-10 seconds later i see this BSOD, with the DPC_WATCHDOG_VIOLATION:
Link to image
and that's it, the countdown gets to 100% and the computers restarts.
Again, the drivers are up-to-date and the computer is perfect all the time, unless i close the lid.
If i'm not wrong it didn't happen if i'd putt the computer in sleep mode manually and only than close the lid, but i almost never putt it to sleep in manually so it could be a coincidence...
Hope you could help me, i really like this computer but these errors drive me crazy.
Thanks!
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Had anyone ever heard about this issue? ;\
Really hurting my Y2P experience...

Hello, I have a macbook pro late 2011 15 inch with 4 gb ram. My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Is there a fix?

My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?

when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Screen appears dimmer after waking from sleep

Hi
Recently, I've noticed the brightness of the 24" screen is dimmer after waking from sleep, regardless of the brightness setting in the Display preferences. If I restart the computer, the regular brightness returns. Curious if anyone else is seeing this happen on their Aluminum iMac?

This is normal. As already stated, after waking from Sleep, your screen gradually intensifies brightness until it reaches its full brightness setting. Sort of how GE Soft White Bulbs take a couple of minutes to warm up to achieve their final Lumens.
The reason it's instantly Bright upon Restart is that the machine goes through an initialization upon bootup where it performs a complete system check and ensures all settings are initialized and set according to your preferences. When Sleep is enabled (something I RARELY ever do) the machine lowers all operational parameters and upon waking, it slowly gets back up to speed.
Just like how putting drives to sleep causes severe lag once woken up before you can perform all functions at full speed.
Activating your screen saver is the best option.

Why does my Mac screen suddenly go dark? Sometimes it stays dark for an indefinite period after waking up from sleep.

Why does my Mac screen suddenly go dark? Sometimes it stays dark for an indefinite period after waking up from sleep. I have to open and shut the monitor screen to get it to light up again.

Might try posting in the MacBook Pro laptop forum. This is the Mac Pro desktop forum.
Also see:
OS X: When your Mac doesn't sleep or wake

Ethernet interface disappears after waking up from sleep

Hi guys,
I've been trying to debug a networking problem without any luck and I think it's about time I ask the forum for help.
My ethernet interface no longer works after I wake up my computer from sleep. I have no idea why.
Before sleep:
# ls /sys/class/net
lo wlp2s0 enp3s0f2
After waking up from sleep,
ls /sys/class/net
lo wlp2s0
Here are the list of services I have running.
UNIT LOAD ACTIVE SUB DESCRIPTION
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded failed failed dhcpcd on enp3s0f2
[email protected] loaded active running Getty on tty1
[email protected] loaded active running Daemon which acts upon network cable inse
kmod-static-nodes.service loaded active exited Create list of required static device nod
[email protected]\x2dSecure.service loaded active exited Networking for netctl profile wlp2s0-Wolf
polkit.service loaded active running Authorization Manager
systemd-backlight@acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of
systemd-fsck@...\x2d38bc68d942fc.service loaded active exited File System Check on /dev/disk/by-uuid/1c
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create static device nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Reboot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
upower.service loaded active running Daemon for power management
[email protected] loaded active running User Manager for 1000
Furthermore, plugging in the ethernet cord after the computer has started doesn't connect to the internet, even when I have the ifplugd service running. I am forced to run:
sudo ip link set enp3s0f2 up
sudo dhcpcd enp3s0f2
However, I can't run these commands after the laptop wakes up from sleep since it no longer sees the ethernet interface.
I am thoroughly confused. Please help me.

It seems to be fixed after the kernel update. On an related note, I've switched from using dhcpcd to netctl. I've enabled netctl to automatically connect to the network using:
# systemctl enable [email protected]
# systemctl enable [email protected]
So when I check for the status of the ethernet profile, I get told that's it's inactive.
#netctl status ethernet-dhcp
netctl@ethernet\x2ddhcp.service - Networking for netctl profile ethernet-dhcp
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
Active: inactive (dead)
Docs: man:netctl.profile(5)
But I turned off the wireless, so I must be connected to the ethernet, So how do I know which profile I'm connected to?

W510 eSATA/USB2.0 combo port does not respond after waking up from sleep mode

Has anyone tried to connect external DVD/CD player or burner to the eSATA/USB combo port and experienced very slow system performance after waking up from sleep mode? It might takes minutes to launch an application program that usually takes just few seconds. My W510 can not even restart. It will just stop at the Thinkpad logo if I tried to restart after waking up from sleep.
The funny thing is if I moved the external DVD/CD player to the USB2.0 port in the back, everything went back to normal. I don't know if this has anything to do with the fact that the combo port has something to do with eSATA.
Thanks

It seems that this problem is unique to my system. I am hoping that one of the Mac Guru's will have at least a pointer in the right direction.
Thanks.

T400 bluetooth doesn't turn on after wake-up from standby mode

Hello
Please help
My T400 doesn't turn on bluetooth after wake-up from standby mode
i need to enable it every time by hand.
Thing thing appeared after migration to Windows 7. Before, i used WinXp and that worked fine.
I setup all recommended software via SystemUpdate

On T400s this happend, if you try Linux to install and after that you install Windows 7. I have test Ubuntu (boot from LiveCD) and after that i had exactly sam eproblem. Solution was to reset BIOS to default values.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

Touchscreen stops working after waking up from sleep

Touchscreen stops working after waking up from sleep sometime it not working at all.
IT encore2 WT8-B32CNM

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

Lose connection to external USB hard drive after waking up from sleep

My Mac lost connection to the external USB hard drive after waking up from sleep. I can still see the folders in the hard drive in Finders, but when I double clip a folder no file within the folder is displayed. I have to reconnect the hard drive with iMac to read its contents.
May I ask how this happens and is there a solution?
I'm using Paragon NTFS for Mac OS X to read from and write to NTFS format of USB external hard drive.
Thanks!

... I un-ticked the "put hard disks to sleep when possible" option in the Energy Saver panel in the System Preferences, and it seems the problem is solved. will have to sleep and wake up my iMac to further verify if this is the solution ...
Alternative advices are always greatly appreciated!

Track pad freeezzzz after waking up from sleep mode

HI
i have OS X Ver 10.5.1
i have enough ram, disk space, and have the 2.4 GHz Core 2 Duo processor.
but when my mac wakes up from sleep the track pad is just not behaving properly, i.e it keeps jumping positions and freezes until i restart. if this continues it will be very frustration to use leopard.
also i did not get the option to archive and install at the installation so i cant even down grade, this is one of those time i trusted that everything will go right and looks like the problems just begun.
please help me !
Vinod

Hi,
I have almost the same problem with my T540p, except that there is no internet connection not only after waking up from the sleep mode, but also when starting windows and sometimes the internet connection will get suddenly lost during normal windows run.
I tried installing all kinds of drivers - latest from intel, latest from lenovo update (which is always different version from the one from intel), some older versions. Nothing helps.
Re-enabling the WiFi device like Aaziz1982 suggested, doesn't help.
Here is a more detailed description of my problem: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T540p-WiFi-Connected-no-internet/m-p/177818...
Does anyone have other suggestions?
Thank you,
Pavel

Screen remains dim after waking up on virtual terminals

I am having a strange issue when the display gets dim and won't get bright again, but only when I am no a vt.
I have an older (~4 yrs) Dell Studio 1737 with a Mobility Radeon inside with the xf86-video-ati driver:
$ lspci | grep -i vga
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV635/M86 [Mobility Radeon HD 3650]
$ pacman -Qq | grep xf86-video
xf86-video-ati
$ lsmod | grep radeon
radeon 754282 2
ttm 65132 1 radeon
drm_kms_helper 35086 1 radeon
drm 229990 4 ttm,drm_kms_helper,radeon
i2c_algo_bit 5391 1 radeon
i2c_core 22479 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,radeon,videodev
When I leave my computer on one of the virtual consoles (vt2 - vt6) and it is idle for (I think) 10 minutes, it gets dim (via DPMS, I guess?) . However, I can't make it go bright again - after I move the mouse (which I am not sure makes any sense since I have no mouse in the vts) / press any key, nothing happens.
Now, the strange thing is, when the light is right, I can just see the text, but it is very, very dark and unreadable. Under normal circumstances I can see nothing and the screen can't be told apart form a blank black display. Actually, I had thought it was blank for a while until only recently, when I had the Sun shining against the display.
I wrote a simple script whose name is 'b':
echo 10 | tee /sys/class/backlight/acpi_video0/brightness
and I left the console as root (!) for 10 minutes (!) and when the screen went dim I called 'b' and nothing happened. I have no other ideas about how deal with this one - I tried reading and looking around, and have pretty much nothing. Does this problem ring any bells? Does anybody know how this can be fixed (apart from "just don't leave it on the vt for longer than 10 mins" or similar ;d - these have occurred to me already). Of course, if you need any more information about my hardware, I will provide it.
I am running a constantly updated arch.
wujek
Last edited by wujek.srujek (2013-06-12 21:53:03)

From the news page here...
http://xlr8yourmac.com/
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Two users reported that the opposite worked...
Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

When waking up from standby, monitors power up but no picture is displayed. HP ENVY Phoenix h9

Product: HP ENVY Phoenix h9 PC Series
Product #: H3Y51AA#BL
Model: h9-1387
OS: Windows 8 64-bit
Monitors: DELL 2407WFPHC x 2
Updated graphics drivers to latest non-beta version.
Hello,
Since purchasing my PC a few months ago, there has been one "display" problem after another. This is the current problem:
When stepping away from my computer, I lock it via Win+L and shortly after my monitors turn off. When returning a short time later, I attempt to wake up (But not really "wake up"... To try and fix previous display problems, I've already disabled hibernation and sleep options) my computer by moving my mouse. This causes the monitors to exit standby and power up, but all that is dispalyed is black screens when I should have been presented with the login screen.
Mouse and keyboard clicks do nothing and I'm stuck at black screens. To continue, I press my PC's power button which causes the hard drives to spin-up and shortly after the computer turns off. I press the power button again and the computer boots to the login screen where once I enter my password, Windows loads and all my programs etc are displayed as they were before I locked my PC.
You can see previous problems I've had listed below, hopefully they will also help you detect the cause of the current problem.
Please help.
Thanks!
Peter
Previous problems that I've had:
1) When waking from hibernation, the computer would not wake monitors from standby leaving no way to login and save work. Hard reboot required. Solution: Disable Windows hibernation features.
2) Error along the lines of "Display driver failed and have recovered". Possible solution: Disabled hardware acceleration in Firefox.
3) When waking from standby, I find my 2 monitors have merged into one, and at a different resolution than normal. Once entering password to login, programs that were on seperate monitors are now on the same monitor. Right-clicking the desktop and selecting "Screen Resolution" -> "Detect" would set the monitors back to normal until the problem occurs again. Possible solution: Updated graphics card driver. Not sure if this problem has been fixed, it may have just been covered up by the new problem mentioned above.
This question was solved.
View Solution.

Hey peterallcdn,
I'm sorry you're running into this resuming from sleep issue. Sometimes services that are trying to resume can cause issues like this. I would suggest trying a clean boot (booting with only essential system services running) and then seeing if it resumes from sleep properly.
Here are the steps to disable non-critical services:
1. Windows + Q to bring up Search
2. Type 'msconfig' and press Enter
3. Click the Services Tab
4. Check the Hide All Microsoft Services box
5. Click the Disable All button
6. Click Apply and Restart
When you restart Windows should only load essential system services, no 3rd party software. Lock the computer and let it go into sleep mode as you usually do and then try to resume from sleep. Let me know what the result of that is.
I have seen other cases where Google Talk or antivirus programs will prevent the computer from resuming properly.

My iPad loses connection after waking away from router even in the next room over.

I know it's just my iPad, as when other people with iPads are here (or even just with my iPhone), they still have their connection and mine is lost. Or when I go places, people will have their connection pretty far away from their router and my connection is lost. I have rebooted the iPad and nothing. My iPad screen cracked previously so I took it someplace to get it fixed, so I don't know if that has anything to deal with it? Help please!?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Screen extreme brightness after waking up from standby

Similar Messages

Maybe you are looking for