Screen field in maintenance item

Hi Expert,
i would like set screen field in maintenance item. i cannot find the configuration path. pls help.
Thanks
Rgds,

Hi
you can add customer-specific fields to the table of maintenance items (table MPOS) & activate user exit IPRM0003 to display these fields in additional tab of maintenance item. You can also transfer these fields to call objects (orders or notifications) using function exits EXIT_SAPLCOIH_030 & EXIT_SAPLIWOL_031
Regards
Shakti

Similar Messages

Add Revision Field to Maintenance Item

Hi,
We are planning to add the Revision Field to the maintenance item screen so it can be used in maintenance planning. The idea is that we create a bunch of dateless revisions that represent weeks in an annual shut. We know roughly what orders should be exectued in what sequence for the shut, so we can assign them to say ASWK1 (annual shut week 1). However, we don't know what week the shut is going to happen each year as it can change (hence the dateless revision buckets).
We then add that revision to the maintenance item when the order is planned, so when the orders are generated the planner can filter by the work that needs to be done in the first week of the shut and so forth.
We will also have another set of revisions with acutal dates each year, so then planner will then change the dateless revision to the one with actual dates on it once the shut dates are known.
Does anyone see any problems with this or know of another way to achieve the same result without customising the Maintenance item screen?
Cheers,
Maikel

Hi
Is this a business requirment to create the Maintenance order?
Because once the Maintenace order is generated your capacities are booked and if any component is assigned is also reserved.
What i think ,create the notification from plan and as and when required change the notification to maintenance orders when the shutdown dates are known and assign the revision .
Shail

How to configure the maintenance item screen layout

Hello experts,
I need to configure Maintenance Item Screen layout .
How do I do that? I checked in SPRO and could not find a place.
Need to make some some fields as required.
Thanks,
Raneetha.

There are some fields that can be made mandatory using Field Selection for Notification & Order.
Some fields should be made mandatory using development (User Exit IPRM0004)

Add New Screen Fields in Delievery Line Item

Hello All,
We have a requiremnet where we should add 3 custom fields to delivery line item tabs,
please let me know how I can add a new tab for delievry line item tabs and how to add new custom screen fields in that tab,.
Thanks
Add New Screen Fields in Delievery Line Item
Edited by: kishore_99 on Dec 8, 2009 5:31 PM

No, I won't explain it in detail - you need to read the documentation and at least make an attempt at the process on your own first. The documentation is right there in the IMG where I said it was but here's the path since you can't find it:
Logistics Execution -> Shipping -> System Modifications -> Business Add-Ins in Shipping -> BADI for Additional Item Detail Screen...

How to assign maintenance view to a selection screen field in a program.

Hi Experts,
I have created a custom table. Now, I have a program where there is a selection screen field for example "Load". After entering a value in the selection screen, and press enter, the user must be redirected to the maintenance view of the custom table to modify the specifed record.
Can anyone help me on how to do that?
Thanks a lot for ur precious help.
Regards,
Aksh

Hi,
What is the need to search for a program.
Use transaction SM30 or SE16 to create or maintain entries in the table.
e.g. if the Maintenance view is created on table A, then Goto transaction SM30 or SE16 and give the table name as A and proceed. This will automatically take u to the maintenance view on tha table A.
Regards,
Himanshu

Fetch screen fields Line item wise

Hi All,
I have a requirement where i've to display some popup messages based on some conditions in MIGO transaction when POST button is clicked.
For that i have done certain changes in a BAdI IF_EX_MB_MIGO_BADI~POST_DOCUMENT .
But i require to read the screen field for G/L account ie GOITEM-KONTO of screen number 0345.
the G/L account can be accessed thru internal table IT_MSEG-SAKTO in the method, but the problem is the screen field has been left blank and when POST is clicked, by the time this BAdi is reached, the value is filled. And i need to add few codes only when the screen field has been left blank.
I found out FM - DYNP_VALUES_READ . But this reads only header screen data, so i'm unable to retrieve the line item wise G/L account screen values.
Please help.
Thanks,
Ateet

Hi Petr,
I dont think u read the question properly.
The problem is the screen field has been left blank and when POST is clicked, by the time that BAdi is reached, the value is filled. And requirement is to execute some part of code only when the screen field for G/L account is left blank/not blank. I want screen field value , not the value which is in IT_MSEG.
While giving inputs in MIGO screen it is blank but by the time it reaches the BAdI where i've written the code its getting filled. I want the values from screen just before it gets filled.
I was hoping to find some FM like DYNP_VALUES_READ which fetches screen elements line item wise too.
I think i will have to try n search a different BAdI where i can get the screen values b4 updation.
Regards,
Ateet

Create Limit Item Screen Fields name

Hi Experts,
I am unable to find the below screen field names. Can please let me know the Below screen fields of Create limit item in SRM Shoping Cart.
Service Agent (Input filed)
Account assignment.(Radio button Unknown and Known)
Thanks in Advance

Hello,
If you go to SE80 transaction, type the BBP_SC_UI_ITS as Function Group, you can choose the screen number 210.
If you click on "Layout" button, you will se the same shopping cart limit page. If you click on the desired fields, you can see their names, as below:
Service Agent:
GS_SCR_LIMIT-WORKER_ID, which is linked to GS_SCR_LIMIT-WORKER_NAME and GS_SCR_LIMIT-WORKER_GUID
Unknown radio button:
GS_SCR_LIMIT-ACC_UNKNOWN
Best regards,
Ricardo

Maintenance Item assignment to a Maintenance Plan

Dear Expert,
we need some help about the following scenario.
Currently we are working on preventive maintenance in SAP ECC 6.0 system. We have created several maintenance items without assignment to maintenance plans in order to use them like models: to make quickly the creation of a maintenance plan our users can choose the suitable maintenance item from a range.
In these items we have inserted only strategy and maintenance task list but we have not insert the technical object.
We carry out the following steps:
1. we run transaction IP42;
2. we insert the maintenance category and the strategy;
3. in the tab "Item" we press the button "Assign more items";
4. system runs report RIMPOS00 (Display Maintenance Item: Selection Criteria) in order to select the item to insert in the maintenance plan. In this screen the followin fields are locked (we can not change them):
- "Maint. plan cat.";
- "Maintenance strategy";
- "MaintPlan assignment" and the radio botton is set on "without".
In this way if a maintenance item has been already assigned to a maintenance plan users can not select it for the current plan.
In your opinion could we open the radio buttons for the field "MaintPlan assignment" ? Could anyone help us ?
Thank you very much for your help.
Kind regards.

Hi,
Pl.try following path in SPRO,
Plant Maintenance and Customer Service..Maintenance Plans, Work Centers, Task Lists and PRTs..
Maintenance Plans..Set List Editing for Maintenance Items
After clicking on Execute button u will get a pop up " Customising list editing "Double click on selection do the changes & save.
It will work i think.
Pl.try.
Regards,
Amit

Sort field in maintenance order

Hello;
I want to make sort field in maintenance order as a mandatory field. But if I make it as a mandatory field, system still allows me to save the order as long as I have not clicked 'Location' tab. So there is no positive control over this field. May I know, how do I achieve this? I have even tried to put order type as the influencing field but it does not help.
Points assured.
Regards
Hemant

Hello Hemant,
access to the SAP service marketplace via www.service.sap.com to create an OSS message. Choose link "product errors". Therefore you need an OSS user and you have to be authorized to create OSS messages.
To create an user-exit, you have to go to transaction CMOD. There you have to create a project and assign the enhancement you want to use (I'm not really sure, but I think IWO10009 is the correct one in your case - you can search the user-exits via transaction SMOD - search for IWO*).
After this you have to implement your coding and then you have to activate the project.
The implementation of the user-exit should be done by an ABAP developer.
By the way - I've had a look at the OSS. There's note 768576.
Reason and Prerequisites
The problem is caused by a missing function.
Influences set via field selection will only become effective if a screen with the corresponding fields is processed. You must also refer to the documentation defined in the corresponding Customizing area. For the location & account assignment data, no additional check is (such as with the general order header data) is realised during the saving.
Prerequisite
Via field selection you declared fields of the location & account assignment data as mandatory field, and no screen that contains these fields was passed.
Solution
By means of the example code, you must implement a corresponding mandatory field check via customer enhancement IWO10009 at the time of the order backup.
1. Create subroutine Z_IWO10009_GET_DATA_FOR_FAW in program SAPMILA0. It would be best if you create an own include ZMILA0F1 for this so that you will not have any unnecessary expenditure for future Support Packages (via Transaction SE80).
FORM Z_IWO10009_GET_DATA_FOR_FAW.
CALL FUNCTION 'CO_IH_GET_HEADER'
       IMPORTING
                 CAUFVD_IMP = CAUFVD.
CALL FUNCTION 'CO_IH_GET_ILOA'
       EXPORTING
                 CAUFVD_IMP = CAUFVD
       IMPORTING
                ILOA_WA    = ILOA.
ENDFORM.                    "Z_IWO10009_GET_DATA_FOR_FAW
2. Create the following source code in customer enhancement IWO10009:
STATICS: XTFAWF LIKE TFAWF OCCURS 0 WITH HEADER LINE.
tables: tfawf.
DATA: wa_screen    LIKE screen.
FIELD-SYMBOLS: 'A'.
perform Z_IWO10009_GET_DATA_FOR_FAW(SAPMILA0).
if xtfawf[] is initial.
    SELECT * FROM TFAWF INTO TABLE XTFAWF
             WHERE PROG = 'SAPMILA0'.
endif.
LOOP AT XTFAWF WHERE CUST_M = 'X'.
    CALL FUNCTION 'FIELD_SELECTION_INFLUENCE'
         EXPORTING
              dynprogruppe = '7   '
              mode        = 'C'
              modulpool    = 'SAPMILA0'
              fieldname    = XTFAWF-MFELD
         IMPORTING
              input        = wa_screen-input
              output      = wa_screen-output
              active      = wa_screen-active
              required    = wa_screen-required
              intensified = wa_screen-intensified
              invisible    = wa_screen-invisible
         EXCEPTIONS
              OTHERS      = 1.
    if wa_screen-required = 1.
      clear lv_mfeld.
      lv_mfeld = 'CAUFVD_IMP-'.
      case XTFAWF-MFELD.
        when 'ILOA-AUFNR'.
          lv_mfeld+11 = 'IAUFNR'.
        when 'ILOA-KOKRS'.
          lv_mfeld+11 = 'IKOKRS'.
        when 'ILOA-BUKRS'.
          lv_mfeld+11 = 'IBUKRS'.
        when 'ILOA-GSBER'.
          lv_mfeld+11 = 'IGSBER'.
        when 'RILA0-ARBPL'.
          lv_mfeld11 = xtfawf-mfeld6.
        when others.
          lv_mfeld11 = xtfawf-mfeld5.
      endcase.
      ASSIGN (lv_mfeld) TO IS INITIAL.
        Message E461(IW)
        with 'Mussfelder der Standort&Kontierungsdaten füllen'.
        EXIT.
      ENDIF.
    endif.
endloop.
endif.
3. Activate the changes
Correspondingly you can implement this solution also for the order release, for example, via customer enhancement IWO10002.
Bear in mind that this is a source code proposal. It might be useful or necessary to adjust this source code to special applications.
Best regards
Stephan
Edited by: Stephan Theis on Jan 5, 2008 11:20 AM

Screen Fields Not getting Updated with DYNP_VALUES_UPDATE

Hi All,
I am using FM DYNP_VALUES_READ to read the screen field values and then modifying those values and passing the modified table to DYNP_VALUES_UPDATE. But the problem is screen fields are not populated with these values . The values I wish to populate are footer values . I am using OO ALV for this wherein I am handling an event for filter of records and accordingly I need to modify my footer. Any Suggestions??
*&      Form footer
      Caslculate Total items, number of hits/Miss and percent MSP
--> p1        text
<-- p2        text
FORM footer .
CLEAR : io_totitems,
          io_tothit,
          io_totmiss,
          io_permiss.
IF NOT l_flag EQ 1.
Get total items
DESCRIBE TABLE i_outdata LINES io_totitems.
LOOP AT i_outdata INTO wa_outdata.
calculate number of hits
    IF wa_outdata-hit_miss = 'HIT'.
      io_tothit = io_tothit + 1.
    ENDIF.
calculate number of Miss
    IF wa_outdata-hit_miss = 'MISS'.
      io_totmiss = io_totmiss + 1.
    ENDIF.
    CLEAR wa_outdata.
ENDLOOP.
calculate percent MSP
io_permiss = ( ( io_totitems - io_totmiss ) / io_totitems ) * 100 .
IF l_flag EQ 1.
    wa_dynpread-fieldname = 'IO_TOTITEMS'.
    APPEND wa_dynpread TO t_dynpread.
    wa_dynpread-fieldname = 'IO_TOTHIT'.
    APPEND wa_dynpread TO t_dynpread.
    wa_dynpread-fieldname = 'IO_TOTMISS'.
    APPEND wa_dynpread TO t_dynpread.
    wa_dynpread-fieldname = 'IO_PERMISS'.
    APPEND wa_dynpread TO t_dynpread.
    CLEAR wa_dynpread.
    d020s-prog = sy-repid.
    d020s-dnum = sy-dynnr.
    CALL FUNCTION 'DYNP_VALUES_READ'
            EXPORTING
               dyname               = d020s-prog
               dynumb               = d020s-dnum
               translate_to_upper   = 'X'
          REQUEST              = ' '
            TABLES
               dynpfields           = t_dynpread.
    MOVE io_totitems TO io_totitem.
    CONDENSE io_totitem NO-GAPS.
    MOVE io_tothit TO io_tothits.
    CONDENSE io_tothits NO-GAPS.
    MOVE io_totmiss TO io_totmis.
    CONDENSE io_totmis NO-GAPS.
    MOVE io_permiss TO io_permis.
    CONDENSE io_permis NO-GAPS.
    LOOP AT t_dynpread INTO wa_dynpread.
      CASE: wa_dynpread-fieldname.
        WHEN 'IO_TOTITEMS'.
          wa_dynpread-fieldvalue = io_totitem .
          MODIFY t_dynpread FROM wa_dynpread.
        WHEN 'IO_TOTHIT'.
          wa_dynpread-fieldvalue = io_tothits.
          MODIFY t_dynpread FROM wa_dynpread.
        WHEN 'IO_TOTMISS'.
          wa_dynpread-fieldvalue = io_totmis.
          MODIFY t_dynpread FROM wa_dynpread.
        WHEN 'IO_PERMISS'.
          wa_dynpread-fieldvalue = io_permis .
          MODIFY t_dynpread FROM wa_dynpread.
      ENDCASE.
      CLEAR wa_dynpread.
    ENDLOOP.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = d020s-prog
        dynumb               = d020s-dnum
      TABLES
        dynpfields           = t_dynpread
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
Get all fotter details in a internal table
this is used to download footer in Excel
wa_footer-fldname = 'Total Items '.
wa_footer-value = io_totitems.
APPEND wa_footer TO i_footer.
wa_footer-fldname = 'Number of HIT'.
wa_footer-value = io_tothit.
APPEND wa_footer TO i_footer.
wa_footer-fldname = 'Number of MISS'.
wa_footer-value = io_totmiss.
APPEND wa_footer TO i_footer.
wa_footer-fldname = 'Percentage MISS '.
wa_footer-value = io_permiss.
APPEND wa_footer TO i_footer.
CLEAR wa_footer.
ENDFORM.                    " footer

data: t_dynfields1 type table of dynpread with header line.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = d020s-prog
dynumb = d020s-dnum
translate_to_upper = 'X'
REQUEST = ' '
TABLES
dynpfields = t_dynfields1.
<b>read table t_dynfields1 index 1</b> I hope this is missing
I will be selecting from a list .
Because once the value is read we need to update the screen field with that value .
Here the selected value will be in the first place
Now
Your operation is to populate the fields with some variables .
In the same when I do this there is only one value then
Im expecting only one entry here
LOOP AT t_dynpread INTO wa_dynpread.
CASE: wa_dynpread-fieldname.
WHEN 'IO_TOTITEMS'.
wa_dynpread-fieldvalue = io_totitem .
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_TOTHIT'.
wa_dynpread-fieldvalue = io_tothits.
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_TOTMISS'.
wa_dynpread-fieldvalue = io_totmis.
MODIFY t_dynpread FROM wa_dynpread.
WHEN 'IO_PERMISS'.
wa_dynpread-fieldvalue = io_permis .
MODIFY t_dynpread FROM wa_dynpread.
ENDCASE.
CLEAR wa_dynpread.
ENDLOOP. */
Comment this for a while and
Change the code as
t_dynfields1-fieldname = ' '. "<--- header name
t_dynfields1-fieldvalue = ' '."<----val
append t_dynfields1.
t_dynfields1-fieldname = ' '.
t_dynfields1-fieldvalue = ' '.
append t_dynfields1.
t_dynfields1-fieldname = ' '.
t_dynfields1-fieldvalue = ' '.
append t_dynfields1.
And check .
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = d020s-prog
dynumb = d020s-dnum
TABLES
dynpfields = t_dynfields1.
regards,
vijay

Adding new field in ME21N items level NO ADDITIONAL TAB or SUBSCREEN

Hello Gurus!!
I have a requirement where I am just trying to add a new field ZZ*** at Item level in ME21N (and no new tabs please)
I got the modification key and now wat i see is that in screen 1211 SAP has some field mappings with metadata.
Refer to Include LMEMFSF0T.
Can you please help me how sud i proceed or wat can be an alternate way out to solve.
regards,
Prasenjit Singh Bist

Hi,
     Another way of doing the same is to use screen-exits for the transaction. You can use the standard enhancement MM06E005 in SMOD for the Purchasing related custom fields. You can add the fields in the screens 0101, 0111 of program SAPLXM06 to get the fields in the tab 'Customer Data' at header level and item level for ME* transactions.
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
                    are the function modules where u need to do the coding.
and the fields u have added need to be included in the includes
CI_EKKODB
CI_EKPODB
of EKKO and EKPO for header level and item level respectively.
Regards,
Vishnu Priya
Message was edited by:
        Vishnu priya
Message was edited by:
        Vishnu priya

Problem with G/L account screen field in PR for Services?

Hi all,
While creating PR, I am facing an issue with the screen field G/L account for services i.e item category 'D' .
Once service number is entered in the screen, a pop-up window is triggering to enter the G/L account.
once the G/L account is entered and click continue, unable to change this G/L account again because the
field is greyed out(in Account asisgnment Tab)?
Is it the standard SAP behaviour? Are there any settings to change the field in to input enabled?
Please help.
Thanks,
Aravind

Hi Aravind,
To edit the G/L Account in the Service PO, first select the "Service" tab at Item detail screen, select your Service line in the Item detail, and then press " Account Assignment" icon which is available below the Item details screen ( In Service" tab). There you can edit the G/l account field.
Umakanth R

What User Exit can I use to add a cust field to PO Item overview in ME23n?

Hi,
I need help!
Does anyone have any examples of adding a new cust field to PO Item Detail screen with a user exit?
In transactions ME21n, ME22n, ME23n I need to add a new field in PO Item overview (screen 1211 of SAPLMEGUI). The new field ZZUNSPSC, has been appended to table EKPO as a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
Which user exit I can use for the purpose of adding a new input/output field to the PO item overview on SAPLMEGUI screen 1211?
We are on release SAP ERP Central Component 5.0

Hi,
Thank you for the response. I tried this and found Badi ME_PROCESS_PO_CUST. Do you have any examples of adding a new cust field to PO Item overview screen using badi ME_PROCESS_PO_CUST? I have had little experience creating badi's, and would appreciate very much some sample code if possible.
In transactions ME21n, ME22n, ME23n I need to add a new field in PO Item overview (screen 1211 of SAPLMEGUI). The new field ZZUNSPSC, has been appended to table EKPO as a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
Can you tell me if method FIELDSELECTION_ITEM of badi ME_PROCESS_PO_CUST the correct one to use for the purpose of adding a new input/output field to the PO item overview on SAPLMEGUI screen 1211?
Thank you for help - much appreciated,
Vicki

Export/import procedure for foreign trade field in PO item

Hi Experts,
I met a problem in import PO. Is there a possible way to make the Export/import procedure for foreign trade field in PO item automatically be determined?
Thanks,
Emily

IF the import data tab shows up is depending on customizing for foreign trade data.
The setting is done in IMG
MM > Purchasing > Foreign Trade/ Custome > Control FT data in MM SD documents > Import screens in purchasing document

Custom screen field in the SRM portal screen for Business Partner Bidder

I need to add a custom screen field in the SRM portal screen for Business Partner. I have added this custom field in the include structure: CI_EEW_BUT000 and activated it.
I was expecting to see the enhanced field available in the SRM portal screen when I create the bidder. But is not available.
The new field are available if I edit an Business partner only.

Hi,
Please look into the following OSS Notes:
Note 675800 - Business partner enhancement SRM on maintenance screen
Note 672960 - User-defined fields 2
Thanks,
Pradeep

Screen field in maintenance item

Similar Messages

Maybe you are looking for