Screen field Updation using user Exit

Dear all
In VA11, in the Services Tab, there is a table control . Through Configuration , Functional consultant added one filed. The added field has to be filled by the customer Exit SRVESLL . In the debugging mode , claculation is working properly. But in the screen , the calculated value is not appearing .
Can anyone suggest me any solution???
Thanks and Regards
Karthikeyan.P

Ya, I have extended .
SRV_ESLL-ZIELWERT = SRV_ESLL-NETWR / SRV_ESLL-MENGE.
but still its not appearing in the screen.
thnkz
Edited by: karthikeyan palaniayya on Apr 15, 2010 8:00 AM

Similar Messages

Delivery text updation using user exits

Hii All
Our client has a requirment where we need to update text in delivery header when we save the delivery.
The delivery text needs to be updated when we save the delivery.
Can anyone help me in letting me know steps to be followed to do the same.
Thanks & Regards,
Gaurav Manocha

First of all identify the text id associated with your delivery. Once you identify the text id, change the text id in the sample program below. You can have this logic coded within your MV50AFZ1 user exit
data: w_txt_hdr LIKE thead,
      i_text LIKE tline OCCURS 0 WITH HEADER LINE,
                     i_text-tdformat = '* '.
                     i_text-tdline = 'sample'.
               append i_text.
              w_txt_hdr-tdobject = 'VBBK'.
              w_txt_hdr-tdname   = likp-vbeln.
              w_txt_hdr-tdid     = '0008'. "text id
              w_txt_hdr-tdspras = sy-langu.
             CALL FUNCTION 'SAVE_TEXT'
                   EXPORTING
                        client          = sy-mandt
                        header          = w_txt_hdr
                        savemode_direct = 'X'
                   TABLES
                        lines           = i_text
                   EXCEPTIONS
                        id              = 1
                        language        = 2
                        name            = 3
                        object          = 4
                        OTHERS          = 5.
              IF sy-subrc <> 0.
              ENDIF.

How to update old records of LIPS used user exit MV50AFZ1

To All Experts,
I have used User Exit MV50AFZ1 and in this user exit i updated the fields
USEREXIT_MOVE_FIELD_TO_LIPS.
LIPS-ETENR = VBEP-ETENR.
Its working fine for new VL0N1 t-code, but what about old recods of LIPS table ?
How to update old records ? Pl. guide me.
Yusuf

Hi Yusuf,
See SAP Note 415716 - User exits in delivery processing, it explain how these userexits work and cautions that you must have.
Regards
Eduardo

Creating delivery, can I check the sales order's field using user-exit or ?

Hi dear.
When I create a delivery in VL01N or other transactions, I want automatically to check the sales order's some field and to decide whether create or not.
Can I use user-exit for that?
Or other solutions is there?
Thanks regards

Yes your requirement can be achieved thru a User Exit.
There are many User Exits available in Delivery as listed in the link below:
https://wiki.sdn.sap.com/wiki/display/ERPLO/SDUserexits
The selection of necessary User Exit is based on your specific requirement.
Also if you want to check some feild of Sales Order whether it is completed or not, then you can also use Incompletion Procedure in Sales Order, which will make sure that no Sales Order is saved until the end-user enter data in those feilds.
Hope this helps...
Thanks,
Jignesh Mehta

Change gl account in MIGO by using user exit

Dear all,
Could you tell me how to use user exit to change the gl account in MIGO?
I have searched in SDN and found some code.
In user exit: MBCF0002 ( EXIT_SAPMM07M_001 ).
FIELD-SYMBOLS <F2> TYPE ANY."Field Symbol for the GL ACCOUNT
DATA : W_KONTO_NAME(50) VALUE '(SAPMM07M)DM07M-KONTO'.
ASSIGN (W_KONTO_NAME) TO <F2>.
MOVE "GLACCOUNT" TO <F2>.
"GLACCOUNT" is the new GL account you want to change.
but thecode doesn't work, it can not change the BSEG-HKONT.
Could you help me solve this problem?
Many thanks
Message was edited by:
        Chen Zhonghua

USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - MIGO                     Goods Movement
Exit Name           Description
MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
No of Exits:          8
Rewards if useful.........
Minal

Can I use User Exit u2013 IWOC0004 u2013 Change Single-Level List for TCODE IW37N?

Hi All,
Can I use User Exit u2013 IWOC0004 u2013 Change Single-Level List for TCODE IW37N?
In documentation of the User Exit I can see that I can use this user Exit for IW37(Program - RIAFVC20) , but I want to use this for IW37N (RIH_ORDER_OPERATION_LIST).
Please tell me is it possible.
With best regards,
Narendra

Hi Pete Sir,
I am on 4.7 , how to work with it. I am going to use screen exit IW0110018 and I want to add User fields in the IW37N.
Thanks with best regards,
Narendra

Can i use user exits

Hi,
Can anybody tell me if i can use user exits for not applying cost centre fields for Assets and liabilites gl a/c when we post transcations in fb60 0r fb50 f-22 etc
warm regards
Manjunath

hi Manjunath,
you can try to set up a substitution and see if it is working. On the other hand P/L accounts must have a CO object by posting, of course cost center is just one option.
ec

MIRO using user exit EXIT_SAPLFYTX_USER_001

We are using user exit EXIT_SAPLFYTX_USER_001 for both ME21N and
MIRO. ME21N works fine in that we added an item number field to I_INPUT_USER and it populates with the current item number on the po so we are able to get the gl account from EKKN. The problem is for tcode
MIRO. The data in the I_INPUT_USER is all header data. There is no material number, qty, item number, etc. So we cannot go back to the po/item to get the gl account number to pass to vertex. I used note 302998 to try and add fields EVRPT and EVRTN to the I_INPUT_USER but they are not populated and when I look at KOMP those fields are also blank there.
For MIRO the I_INPUT_USER-KPOSN always has a value of 999999 where for ME21N it has the actual item that it is processing on the po. I have looked and tried multiple OSS notes and nothing seems to work. It seems that the MIRO transaction will only pass header data to vertex. Any help is greatly appreciated!!!! thanks - deb

Martha - I did have an OSS note out there but I found the solution for us.
To get the line item info in I_INPUT_USER and I_TAX_ITEM_INPUT for MIRO we had to go to transaction OBCO and turn on line item processing for our external tax system. As for your question - the header information should be in I_TAX_ITEM_INPUT and in I_TAX_HEADER_INPUT. the I_INPUT_USER is for users to add their own fields that are currently in KOMP. Look at OSS note 302998 it explains how to extend the I_INPUT_USER and how to export and import data that you might need. If this note does not help - go to OSS and do a search on EXIT_SAPLFYTX_USER_001 and some of the other notes should help you. thanks - deb

Mblnr field for mb1c user exit on save

Hello All,
Im using user exit, "EXIT_SAPMM07M_001" in enhancement package "MBCF0002".
I want to use MBLNR field but when i run program and fall into this user exit, i check local variables but MBLNR field is empty.
How can i get this field?
Any ideas?

Hi,
It has 'I_MSEG' structure which 'mblnr' field. did you check this field. it should have value because that is main key in determining material document.
i think my understanding of the issue is in right path.
Thx,
krishna

How to use User Exit for SD...

Hi there,
My client's requirement is to block the overall status of the Sales Order header under status tab to be blocked when user r-enters a new scheduled date in the "First Date" column in the SO.
When they goto VA02, & put a new date it must automatically put a delivery block in the header as well as make the order header status to be blocked.
I see the First date field in the SO is in a Structure RV45A, the field name is ETDAT.
Can you let me know how to use User exit MV45AFZZ?
When doing it, it must put the Delivery block in table VBAK LIFSK.
Rgds,
Pri

Hi Debadatta,
Welcome to SDN.
Have you looked report program <b>RM07MAAU</b> (Report for Material Document Archiving)?
Hope this will help.
Regards,
Ferry Lianto

Inbound idoc values when updated from user exit not saved

I'm trying to process some user exits of an inbound idoc from WE19.
The values get correctly populated to IDOC_DATA internal tables of IDOC_INPUT_ORDRSP function module in debug kode
but when the new idoc is generated from WE19 , those segment values (populated by exit) are not shown/saved.
The user exit is EXIT_SAPLEINM_007.
Is it not possible to populate segment values of inbound idocs from using user exits. If yes , then during testing using WE19 , every time a new idoc is created it should display those values into the concerned segments. Please help.

Hello,
yes is possible it ...
I think the problem is:
or
you have something wrong when to append the new line on internal table
or
the exit used is not correct: read the documentation on EXIT_SAPLEINM_0**

How to use User exit for MM_MATBEL

Hi
I want to exclude some material documents while archiving a range of material document through archive Object MM_MATBEL.
Can you please suggest how to use user exit for this to exclude the material document while archiving.
Please brief me details.
Thanks,
Debadatta

Hi Debadatta,
Welcome to SDN.
Have you looked report program <b>RM07MAAU</b> (Report for Material Document Archiving)?
Hope this will help.
Regards,
Ferry Lianto

Using user exit. ( LVMPTZZ, LVKMPFZ1). used in Credit Management

Hi
How to find using user exit. ( LVMPTZZ, LVKMPFZ1). used in Credit Management .
Plz provide path
Regards
Rohit

Hi,
You can find exits through transactions# SMOD & CMOD also.
Regards
Chandra

Geography based industry scenario which can be implemented using user exit

Hi All,
I am searching for a geography based industry scenario which can be implemented using user exit strategy.
Please let me know me if anyone knows about any such scenario.
Thanks & Regards,
Pranjali.

Hi Amith,
IDOC configured throgh CHANGE pointers.So no need to worry about IDOCS and all.My work was trigger idocs by user exits.Wen ever i change venodr no.. idocs shoud be triger.
Now my question was Insted of going transaction( from there we can go to debuging mode) i want to check this Exit by RBDMIDOC programe(ofter excute this programe and give Message type as CREMAS,from there i want to go debugging mode).
Just now i checked,i put breakpoint in Include programe(INCLUDE ZXF05U01) and excute from XK01,it goes to debuging mode,so its fine.But i want triger from RBDMIDOC programe.Ofter excute RBDMIDOC programe,we can enter CREMAS.From there i want to go debuging mode.
Pls help me,
Thanks

Triggering workflow using user-exits

Hi all,
can anyone tel me how a workflow can be triggered using user-exits??
thanks in advance

Call function module SAP_WAPI_CREATE_EVENT (with COMMIT_WORK = space) to create an event, and use the event to start your workflow (triggering event). Alternatively, you can start the workflow directly using the corresponding SAP_WAPI function module for that purpose. My recommendation is that you normally don't start workflows directly as it is a less flexible solution (or you have to build that flexibility yourself instead of using what you get for free with triggering events).
However, why are you asking this question? I started wondering after seeing you ask an almost identical question in [another thread|Triggering Workflow Using BADI; here.

Screen field Updation using user Exit

Similar Messages

Maybe you are looking for