Screen fine, then doesn't display on startup

When I start my Z10 the blackberry symbol is displayed.  Then the screen starts displaying horizontal mostly green spotted lines.  
It just happened.  No bump or anything.  Also, the fact the BB symbol shows at the start means it's probably working right?  No indication that the touch screen function is working.  
Thanks for any help

Hi jojoistoocool,
Welcome to the support community! Sorry to hear about the issue you are having with the display on your BlackBerry Z10 smartphone. Could you please provide a bit more detail?
Does reinserting your battery have any effect? Were any changes at all made to the BlackBerry smartphone recently?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

  • HT201401 Iphone 3GS screen flashes and doesn't display

    Hi there
    i have been given a Iphone 3gs 16Gb from a friend as they have upgraded to a nexus 4 and the screen connecter was damaged so i have now replaced the LCD with a new one now the screen flashes and doesn't show anything on the screen
    there is no display at all not dark or dim display i have no idea if the screen is working but i have got two so called new screens and both are the same
    i have recovered the Iphone as it connnects to Itunes and appears to fuction correctly with out any problems just not able to see what is on the screen touchscreen is working fine too as i was able to switch the iphone off as my friend had left a passcode on the phone so i put the phone into recovery mode from been on and recovered the phone
    im out of ideas now please help
    Thanks
    Simon

    Hi All
    the iphone is now not displaying anything there is no flash or anything on the screen i have checked the 6r8 coil and it looks fine
    the phone still connects to itunes and appers to work as normal but im unable to see any display so im unable to set it up so i can ring the phone and check
    thanks
    Simon

  • I had a red screen and then a blurring display on pictures after I had turned iPad off.  I reset it and few minutes later it was ok.  What happened?

    I had a red screen appear after turning iPad off and on.  Red line remained at top and pictures were blurring in the display.  I reset and a few minutes later it fixed itself. Should I avoid turning iPad off.  I have an upcoming plane flight.

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Numbers "full screen" in Lion doesn't display filename.

    Since Apple is hyping full screen use, isn't that rather important considering versioning and all.  Am I missing something?

    Most likely the borked Finder updater. OPTION-click & hold the Finder's Dock icon and select RELAUNCH when that occurs. If it continues, file s but report with Apple.

  • LR 5 is up to date but when i try to open it i see it flash on the screen and then doesn't open.   I am running apple OSX 10

    also note that my PScc2014 is up to date but my panel of NIK filters  will not work  message that there is a filter module interface   problem how can this be resolved.  They still work on my old PS CS6?

    problem resolved withe help from adobe and google. All related to the new mac OS and required removing old plug ins  and reinstalling  new .
    It took quite a while ut with help from Adobe and Google, it all worked out

  • Cinima 20 Display at startup - desktop picture is fine then darkens

    When I restart my computer, my background picture fills the screen and it looks like it always did before it quickly changes. After an instant the picture changes by darkening. I have no idea why, but it just started to happen. I have been digging to try and figure this out, but have not found anything yet. Any assistnace would be greatly appreciated.

    Could either be the power supply (the brick) or the backlight circuit board. Can you bring the brick to an Apple store to test it? If the brick works fine, then you will have to return the display to Apple.

  • Private Photos App - pictures not displaying This app was working fine, then suddenly it won`t display any of the photos.

    This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo"  I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy

    1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
    Even organize your photos in albums — right on your device
    2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
    3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
    4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
    5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
    6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

  • T60 Laptop Doesn't Display On-Screen Volume After Hotkey Features Integration Update

    I have a ThinkPad T60 (2008-HC6) laptop running Windows 8 Pro (32-bit). Today (1-24-2013), I installed the "Hotkey Features Integration for Windows 8" update that was released on January 18, 2013. After reboot, the on-screen indicator that pops up when I change the volume on my laptop by pressing the volume up, volume down, or mute keys doesn't show up. The keys work fine, but the indicator doesn't display.
    I've already tried looking for a solution online. One common solution, installing Lenovo Energy Management, didn't solve my problem. No other software was changed on my laptop between when the power indicator last worked and when I installed the Hotkeys update.
    Solved!
    Go to Solution.

    I figured out the problem was with the "On Screen Display" portion of the update. This particular update has two parts to it. First, it adds the "Lenovo Patch Utility" program. Second, it updates the "On Screen Display" program, assuming that an older version was already on the computer being updated. Adding the "Lenovo Patch Utility" didn't cause any harm, but updating the "On Screen Display" prevents the on-screen volume indicator from displaying.
    Ultimately, what I ended up doing was removing the "On Screen Display" with the same utility that I used to update it. Then I downloaded the next newest version of the utility and installed that utility's version of the "On Screen Display" program.
    My on-screen volume indicator is now back and running fine.

  • The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.

    The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.  When I open the app the screen is just blank. As it is a default app I can't delete and reinstall. Anybody else experience this?

    Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
    If that doesn't work then try closing the Videos app via the taskbar : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • After updating iPhoto to 9.2 Photoshop CS2 doesn't display the photo I have opened.  The photo shows in the Navigator on the side panel, but not on the screen.  MFF

    After updating iPhoto to 9.2, Photoshop CS2 doesn't display the photo on the desktop screen, even though the image is shown in the Navigator pallet well to the right.

    No, that is the problem.  I don't see how it should be, but that is what happened after I did the upgrade, which was for iPhoto 9.2.  The upgrade then required that the Library be upgraded.  Then CS2 stopped showing the photo when I opened CS2.  Maybe there was a system upgrade for the whole system, that went along with 9.2.  Before the upgrade CS2 worked.  I even tried photos that I had on backup disks, and they wouldn't show in CS2 even though I had draged them to the PS icon in the dock.  These photos were not on my computer when the Library was upgraded.  I even tried photos fresh from the camera. Elements 9 does work to open the photos.

  • Satellite M30X-111 screen doesn't display anything but external monitor works

    My laptop screen just doesn't display anything (look like when the computer is off) but when I connect the external monitor, then the desktop will be displayed on that monitor. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.
    I again have to plug in the external monitor, and after I tried to reboot, I keep pressing F8 but the start up mode doesn't come up, only the sound of when you keep pressing a button for too long beeps, however, the laptop monitor works again.
    How do I fix this problem?

    Hi
    According to your first posting I presume that LCD display on your notebook is defective. If you can not see BIOS settings or Toshiba welcome screen there must be some display problem.
    Experiment with external display is to be sure that graphic card is not responsible for that. In your case it works with external display and graphic card can not be responsible.
    Like I said try to enter bios settings and report if you can see Toshiba welcome screen.

  • My Contacts program opens but doesn't display on the screen (it appears to be off above the top right hand corner).

    My Contacts program appears to open, but doesn't display on the screen (it appears to be sitting just above the top right hand corner). any suggestions on how to get it back?

    Launch Contacts, then on the "Window" menu select "Zoom". That should maximise the window and give you access to the bottom-right corner where you can resize it, and the bar at the top which you can drag around.

  • Facebook app on iPad doesn't open properly, it opens , then doesn't go to the loggin page, it just closes again without displaying anything

    Facebook app on iPad doesn't open properly, it opens , then doesn't go to the loggin page, it just closes again without displaying anything, how do I fix this ?

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • X6 froze at startup screen and then auto shut off

    Hi everyone,
    Just bought my X6 8Gb two days ago. And I had installed Garmin Mobile XT in it the next day. Everything was fine until I tried to backup my contacts, calendar notes and saved messages from my 6230i using Ovi suite. The phone is able to recognise all of the contacts, calendar notes, and saved messages. However, when I restarted the phone, it stays at the Nokia white startup screen and then shut itself off. The only way around this is to do a hard reset which wipes out everything (Garmin still installed).
    Anyone else had this problem? Thanks!

    Hi,
    To eject the disc press the mouse/trackpad button while turning the machine on.
    I would tentatively say that the HD has gotten corrupted. It is possible that it has failed though.
    Have you tried booting in single user mode and running fsck?
    Hold down the 'Apple' key and 's' while turning the machine on.
    You should see a load of white text and then a 'root#' prompt.
    When this is reached type:
    fsck -fy
    press 'Return'
    If this fails to repair the HD then I would suggest trying it in target disk mode attached to another Mac and run disk utility on it from that.
    If all of these fail the only thing to try next would be to reformat the HD and see if that makes it usable. If it starts reporting errors again I thing the HD is likely knackered.
    Robbie

  • Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying this page

    Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying to visit apple support. Please help me, I don´t want to loose my ipod.

    Hi thenicegirl07,
    It sounds like your Click Wheel iPod is showing a sad iPod icon. If it will go into Disk Mode you may be able to restore it, take a look at the article and quote below for more information about the alert and possible resolutions.
    iPod displays a sad iPod icon
    http://support.apple.com/kb/ts1373
    Resolution
    In most cases, the sad iPod icon indicates a hardware issue. If you are able to force iPod into Disk Mode, then it may not be a hardware issue, and you should try to restore your iPod with the latest software.
    If you cannot force your iPod into disk mode and restore it, then your iPod is in need of service. Set up an iPod Service Request or make a reservation at the Genius Bar before visiting your local Apple Retail Store. To make a reservation:
    Go to http://www.apple.com/retail/storelist/.
    Choose an Apple Store location.
    Click the Reserve link under Genius Bar.
    Choose iPod.
    Select your desired reservation date and time.
    For an easy to follow QuickTime movie, view the Troubleshooting & Extras section of the iPod Tutorials atwww.apple.com/support/ipod/tutorial.
    Additional Information
    iPod displays a folder icon with an exclamation point
    -Jason

Maybe you are looking for