Screen flashes back to home screen for no apparent reason IOS 7.0.3

When reading email or web pages, both my iPad 1 and iPad 2 flash back to the home page without warning. There has also been a considerable slowdown with the performance since the IOS 7.0.3 update. Any others have any ideas or solutions?

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
A reset may help both issues. No data is lost due to a reset.

Similar Messages

  • New to Macbook Air. Screen suddenly expands to 4-500% for no apparent reason. Have to use back arrow to return but lose what I've been typing. What am I doing to cause this?

    New to Macbook Air. Screen suddenly expands to 4-500% for no apparent reason. Have to use back arrow to return but lose what I've been typing. What am I doing to cause this?

    Next time you want to put your iMac screen to sleep, try switching off the Magic Mouse, wait for the notification to come up on the screen telling you the Magic Mouse has been disconnected, wait for it to disappear then press the keyboard shortcut to put the screen to sleep. See if that helps and we'll go from there. If that doesn't help, can you just say wether the screen always turns back on the same time every time?
    Hope that helps
    David

  • Backing Files Stop Working For No Apparent Reason.  Help?

    I have a portal application accessing a remote WSRP PageFlow portlet. The remote portlet populates a backing file and the producer application reads the data. It was working fine and then it stopped working for no apparent reason. The data was simply null, no errors or warnings. I put traces in the backing file and verified that the life-cycle methods were indeed being called and that data was there, and yes, both were indeed the case. Data is being set on the SimpleStateHolder and it's just not transferring over to the producer side.
    In order to rule out environmental issues, I've done this on multiple machines. Also, I started a whole new project, got backing file setup, verified that it worked, started developing with it and one time I deployed and it was broken again. I rolled out the changes I had just made but it didn't matter. The earlier code still failed to work although it had been working moments earlier.
    So, any ideas? Has anybody else encountered backing file issues like this and if so do you have any suggestions on debugging or fixing them?
    Ryan

    I have a portal application accessing a remote WSRP PageFlow portlet. The remote portlet populates a backing file and the producer application reads the data. It was working fine and then it stopped working for no apparent reason. The data was simply null, no errors or warnings. I put traces in the backing file and verified that the life-cycle methods were indeed being called and that data was there, and yes, both were indeed the case. Data is being set on the SimpleStateHolder and it's just not transferring over to the producer side.
    In order to rule out environmental issues, I've done this on multiple machines. Also, I started a whole new project, got backing file setup, verified that it worked, started developing with it and one time I deployed and it was broken again. I rolled out the changes I had just made but it didn't matter. The earlier code still failed to work although it had been working moments earlier.
    So, any ideas? Has anybody else encountered backing file issues like this and if so do you have any suggestions on debugging or fixing them?
    Ryan

  • Since IOS 7.0.3 Screen flashes back to main screen for no reason

    If I am reading an email or a web page, the screen usually flashes back to the main screen without reason or notice.  I have "reset all settings" in the settings section, perform cold and warm reboots but nothing seems to help. Any others with similar problem?

    Try resetting the device (hold the home and power keys down until the Apple logo appears ).
    Barry

  • Ipad2 plus ipad air all of a sudden instantly goes back to home screen.doesnt matter what app i am using just when it decides to do it it does.apple tech has no answer or fix for me does anybody have any idea what is wrong

    ipad2 plus ipad air all of a sudden instantly goes back to home screen.doesnt matter what app i am using just when it decides to do it it does.apple tech has no answer or fix for me does anybody have any idea what is wrong

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    Could also be not enough free space for the iPad to operate efficiently. With iOS 7 it is recommended that you have 15-20% of the storage space on the device free.  For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.
    If neither of these suggestions helps, Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • I can't use my iPad for messages. When I tap the message icon it goes back to home screen and vice vers to send when the messages stays up

    I can't use my message on the iPad when I touch the icon it goes right back to home screen. And if I use from contacts and I hit the upper left hand writing implement it goes back to home screen.

      Try to Reset your device: 
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

  • IOS 8.1 Safari not loading, goes back to home screen

    I have an iPhone 5, 5S and ipad air all on version 8.1.  Safari is not working on any of them.  It tries to load, the blank safari screen comes up, then it crashes and goes back to home screen.  I have to use google chrome to access the internet. I tried restoring my one phone to factory, installed the backup, reset the safari data, reset network settings and still no help.  Can anyone tell me how the **** to delete safari and re-install it? I don't know what else to do about this issue.

    ok. seems to be working now. i wiped (settings/general/reset/erase all content and settings) the iphone6plus that had 8.1 on it and backed up from a backup made with 8.0.2.
    Mail is now loading instantly. but now i have to load all my passwords again for everything - even though i had encrypted backups. weird.

  • HT4623 My I pad one constantly crashes, goes back to home screen, started just in Facebook but now it does it in everything! I have cleared all cookies, and even did the hard re boot...I am about to throw it! Trying to type this it kicked me out twice;-(

    My I pad one constantly crashes, goes back to home screen, started just in Facebook but now it does it in everything! I have cleared all cookies, and even did the hard re boot...I am about to throw it! Trying to type this it kicked me out twice;-(

    1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep/Wake and Home button down until you see the Apple Logo.

  • HT1430 iPad 3 keeps jumping back to home screen ...

    iPad 3 keeps jumping back to Home screen .

    Your apps are crashing. Try some basic troubleshooting steps and see if they help at all.
    Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or .... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Start with those two things and see if the apps quit crashing - or see if the crashes are less frequent.

  • Since I've upgraded my iphone 4 to ios 4.3.3, I can't access my inbox of hotmail.While it's checking e-mails,email application is closed and turn back to home screen.What should I do?

    Since I've upgraded my iphone 4 to ios 4.3.3, I can't access my inbox of hotmail.While it's checking e-mails,email application is closed and turn back to home screen.I've restored my phone but nothing changed.It still goes on.What should I do?

    Thanks for reply,
    It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
    Iwish I have not upgraded.
    I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
    Thanks for your valued suggessions but it didn’tmade any difference to my situation.
    So now I have an ipod in the price of an iPhone4. Crap.
    Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

  • I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen.  What am I doing wrong?

    I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen.  What am I doing wrong?

    Hi RWD2,
    Welcome to the Support Communities!
    To resolve your issue with Facetime freezing when you end a call, I would try the first three steps in the article below. 
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If you are using Wi-Fi, it may be helpful to try these troubleshooting steps as well:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398?viewlocale=en_US
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    I hope this information helps ....
    Have a great day!
    - Judy

  • When I goto app store and select updates and then purchased it spins the hour glass and then go's back to home screen, anyone know the fix?

    When I goto app store and select updates and then purchased it spins the hour glass and then go's back to home screen, anyone know the fix?

    ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

  • Have been using computer to put cds on ipad (icloud).   Now the when you touch the'music' icon, the screen comes up blank and goes immediately back to home screen.

    Have been using laptop to put cds on ipad (icloud).   Now when you touch the 'music' icon, it goes to a blank screen which had been showing playlists, artists, etc for approx 2000 songs I had already put on there.   On another iPad they are still there, but this one is blank.   Cannot find the songs!!  The blank screen immediately goes back to home screen.   What to do??   Thanks.

    Try:
    Closing Apps on iOS
    and:
    Basic Troubleshooting Steps for iOS

  • My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

    My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

    I just did a reset all settings on both.
    Will see where this gets me.
    Thank you for your helpfull input.

  • I can't access my mail,contact,calendars settings on my iPhone after update . i press the icon in setting and it just goes back to home screen.

    i can't access my mail,contact,calendars settings on my iPhone after update . i press the icon in setting and it just goes back to home screen.

    i have the same problem with my iphone 4.and when synching with itunes it says "can't synch contacts with iphone because iphone is using contacts. close contacts on iphone and synch again."

Maybe you are looking for

  • NodeInfo(LogQuestCust.X) ): structure field Add_Documents not found

    Hy All, after reimport of the model and some changes in the CustomController, I got an error message with the text: "com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: NodeInfo(LogQuestCust.X): structure field Add_Documents not fou

  • Represent a digital input in labview

    Hello, i am reading with my module in compact rio ni9401 a input digital signal, how could i see all that digital signal in labview? thanks

  • Platform independency...any chance ?

    hi...java code (.class files ) are platform independence. It is supposed to run any platform.(i believe this) [ // it is fine in different  windows machine ]. However, i was in argue with my friend..... He told that each platform (windows,Unix,Macint

  • Campaign Discounts

    Hi Gurus Is there a way to split and apply the campaign discount only to specific quantities on line items ? Referencing the campaign discount at item level is effecting all the quantities. Is it possible via std configurations? If not, Could you ple

  • Nothing from my rear speaker and sub using VISTA with SB X-Fi Xtreme Noteb

    I know many people have problems with audio not coming out of their rear speaker. I can't seem to even get sound from the diagnosis tests. All I hear is sound and noise coming out of my front speakers and nothing else. Is this a Windows Vista driver