Screen flashes every 3 secs and the finder resets
im on a late 2011 imac and the problem started when i was opening a dmg, before the dmg had finish the finder reset and i cant have acces to the folder with the file that i think is making all this flashing and reseting of the finder, i've even had tried to reset the size of the resolution of the screen and it just flashed and got back to the state it was when the problem started.
I did a "Repair Disk permissions" and that stoped the flashing(there was no sound with the flashing) but i still can not enter to the Applications folder, where the half installed app is, i've even tryed with the
rm -rf ./filename
comand on the terminal and that does not do the trick, reading more i saw some post that said starting the machine in "safe mode" i get the screen with the loading bar but i still cant get to the applications folder. and thats the status right now, ty for the sugestion but i think i need more help!
Similar Messages
-
Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.
The desktop image is fine, taken from the exact same pool of jpg photos. However, as soon as the slide show screen saver comes on, the images are scrambled. What is it about the apple screen saver algorithm that scrambles the pics?
-
mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappearmistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear -
Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!
Bad video card, call Apple, get a case number and return it.
-
G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac
Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support. -
I have an iBook with Dual USB that won't fully turn on. it flashes a "?" and the Mac face symbol in a folder i the middle of the screen. How can I trouble shoot?
Restart with the Option key held down and see if the internal drive appears.
If it does, click on it, press Enter, and then change the setting in the Startup Disk pane of System Preferences or the Startup Disk control panel.
If it doesn't, insert a Mac OS install CD or DVD and use the Disk Utility or Disk First Aid to repair the internal drive. If there aren't any problems, install an OS onto it.
(86157) -
I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
OS X automatically relaunches the Finder when it is quit and the finder is unresponsive--how to solve this?
Double tap Home button, delete Mail from multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data. -
Nokia 6085 - My screen flashes every 5 seconds aft...
hi! i have updated my nokia 6085 from v5.03 to v6.00 and the screen flashes every 5 seconds.
can i get back to the previous version or do something to stop this?Also wanted to add its a... 600-1005xt
Thanks -
To whom it may concern
Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E
2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in good shape I can prove it,the Apple support in Brazil doenst work like in USA.
I look forward to your reply and a resolution of this problem.
Thank you very much!!!You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck! -
I have been trying to find a way to look at the various backup folders to see how big they really are. No luck so far.
The hard links that TM uses are fooling both WhatSize (v10.4.0, released today) and the Finder. BTW, earlier versions of WhatSize will die before it finishes measuring my backup disk.
WhatSize says that there is 6.23 TB of data on my 750 G (698.5 formatted) disk. It says that each of the 31 actual backup folders is about 208 GB (they vary a little).
The Finder, when told to calculate sizes and Nudged to actually do it, does the same thing. Each folder is shown as the total size of the disk at the time it was backed up.
This is due to the hard links. TM uses hard links to represent files and folders that have not changed. Therefore, if a particular file has never changed, it is only on the disk once, but it is pointed to as many times as there are backup folders. Each hard link goes directly back to the original file and it gets counted again for every backup folder. Hard links are designed to look identical to the original file and they sure do. The actual source file won't go away until EVERY hard link that points to it is deleted. The first instance of a file entry in a directory is actually a hard link. Each hard link CAN have a different name too but it will still point back to it's source file. Each hard link carries equal weight to the file system.
- gwsWhatSize 10.4.0 reports the virtual size
Finder won't reliably measure the size -
Screen flashes very fast and and audible sound seems to be alarming
screen flashes very fast and and audible sound seems to be alarming
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
Is there a way to increase the font size in the sidebar of Mac mail and the Finder when running OS 10.6.8?
The only way to increase the size of the onscreen text in the Finder Menu Bar and in the Side bar in Finder Windows is to change the screen resolution in the OS X Preferences Pane under the Displays icon.
What Mac and screen size are you using? -
Hi
I am wondering How to fix the " flashing question mark after the finder icon when starting up" without an apple keyboard. I have 2 of those .7Ghz emacs so just wanna fix them
ThxHi,
>I am using a wireless standard keyboard so maybe the emac doesn't regognise it
Installation of driver software may be required. Do not expect any wireless device to automatically work with a Mac unless guaranteed to do so. In a case like this, use a wired USB keyboard (a PC keyboard should be OK) and a wired mouse to begin with.
>I have installed Ubuntu 13.00 on the HDD from another computer.
Is it a version for PowerPC?
https://wiki.ubuntu.com/PowerPCFAQ
https://wiki.ubuntu.com/PowerPCDownloads
>a list of eMac hotkey's that can be used before OS boot from a standard Windows keyboard?
Could the following article be of interest?
http://support.microsoft.com/kb/970299
If/when starting from a bootable CD, press and hold the C key.
Jan -
Screen flashes between desktop and blue windows 8.1
Just spent time with windows support but no solution yet. After logging in laptop screen flashes between desktop and Blue screen - Windows 8.1. This does not happen in Safe Mode The windows support person was trying to get me to update drivers but all the install options on HP site don't work in Safe Mode. Please help.
Just spent time with windows support but no solution yet. After logging in laptop screen flashes between desktop and Blue screen - Windows 8.1. This does not happen in Safe Mode The windows support person was trying to get me to update drivers but all the install options on HP site don't work in Safe Mode. Please help.
Maybe you are looking for
-
When will nokia lumia 820 will get window 8.1 update in India??
-
Rendering 3D objects in Photoshop CC 2014
Hello, I am trying to render some 3D rasterized text in photoshop. It rendered once before but it was all pixelated so I have been trying to figure out why. One tip I read online said to make quality under render settings it set to Ray Traced. I coul
-
Email links in Safari don't work
When I click on an email link in a website (using Safari 6.1.5), my computer links to TopSites instead of my Mail Account. How do I get the links to go to Mail?
-
Unable to send or receive text messages after updating iOS to 7.0.2
I am unable to send or receive text messages aftering updating to iOS 7.02. I have an iPhone 4S. I have run all the suggested troubleshooting still can't text. I have been to my carrier, AT&T, there is no issue with my account. AT&T suggested resetti
-
after my daughter tried many password to unlock my ipad, it became disabled, everytime i open it, it says "ipad is disabled, connect to itune, but after i connect it to ituned, it can not open due to passcode protected, how can i open my ipad?