Screen flashes white

screen flashes white

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Similar Messages

  • My ipod wont charge. The screen flashed white yesterday and now it doesnt work

    My ipod wont charge. It died yesterday and when i did the lock home button thing the screen flashed white. After that the dead signal wont even pop up now an suggestion. Its a ipod touch 4 generation, 36gb I tried charging it to my computer, wii,tv, wall plug NOTHING WORKS.!
    1. The lock button and home thing WONT WORK.

    Try:
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • View in browser - screen flashes white

    Although I'm fairly new to CS5, all has been going well til now. New site, whilst testing in Google Chrome and Safari, when loading between html pages, the screen flashes white. I'm using a couple of jsQuery - one is Galleria, the other is page transitions from onextrapixel.com . Haven't experienced this with any other site I've done. Would appreciate any words of wisdom.
    Thanks
    K
    This is my template coding:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
      <script type="text/javascript" src="../html/jquery-page-transitions/js/jquery-1.6.4.min.js"></script>
      <script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.js"></script>
      <script src="galleria/galleria-1.2.5.min.js"></script>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    <!-- TemplateBeginEditable name="doctitle" -->
    <title>Arcangel Metalwork Bespoke Makers and Sculptors Hertfordshire</title>
    <!-- TemplateEndEditable -->
    <!-- TemplateBeginEditable name="head" -->
    <!-- TemplateEndEditable -->
    <link href="../CSS styles/arcangelwelcome.css" rel="stylesheet" type="text/css" />
    <style type="text/css">
    html {
        /*If you had a black or close to black background*/
        background-color: #645F6B;
    body {
              background-color: #645F6B;
              background-image:url(../new%20images/webbackground.jpg);
              background-repeat: repeat;
    #apDiv1 {
              position:absolute;
              width:200px;
              height:115px;
              z-index:1;
    #main_area {
              position:relative;
              width:945px;
              height:663px;
              z-index:14;
              left: 15px;
              top:0px;
    #main_edit {
              position:absolute;
              width:939px;
              height:576px;
              z-index:15;
    #footer {
              position:absolute;
              width:940px;
              height:80px;
              z-index:15;
              left: 7px;
              top: 586px;
    #fb_logo {
              position:absolute;
              width:55px;
              height:65px;
              z-index:16;
              left: 4px;
              top: 13px;
    #fb_link {
              position:absolute;
              width:269px;
              height:51px;
              z-index:16;
              left: 77px;
              top: 6px;
    #FSB_logo {
              position:absolute;
              width:49px;
              height:55px;
              z-index:16;
              left: 65px;
              top: 14px;
    #scroll {
              position:absolute;
              width:547px;
              height:560px;
              z-index:14;
              left: 393px;
              top: 51px;
    a:visited {
              text-decoration: none;
    a:hover {
              text-decoration: none;
    a:active {
              text-decoration: none;
    </style>
    <script type="text/javascript">
    function MM_swapImgRestore() { //v3.0
      var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
    function MM_preloadImages() { //v3.0
      var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
        var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
        if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
    function MM_findObj(n, d) { //v4.01
      var p,i,x;  if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
        d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
      if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
      for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
      if(!x && d.getElementById) x=d.getElementById(n); return x;
    function MM_swapImage() { //v3.0
      var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
       if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
    </script>
    </head>
    <body onload="MM_preloadImages('../new images/home_rollover.png','../new images/about_rollover.png','../new images/process_rollover.png','../new images/inside_rollover.png','../new images/outside_rollover.png','../new images/gallery_rollover.png','../new images/blog_rollover.png','../new images/contact_rollover.png')">
    <div id="container">
    <div id="header">
          <div id="Alogo"><img src="../new images/Logo.png" width="178" height="122" alt="logo" /></div>
          <div id="space"></div>
          <div id="navigation">
            <div id="home"><a href="../html/home.html" class="transition" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('home','','../new images/home_rollover.png',1)"><img src="../new images/home.png" name="home" width="60" height="50" border="0" id="home2" /></a></div>
            <div id="about"><a href="../html/about.html" class="transition" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('about','','../new images/about_rollover.png',1)"><img src="../new images/about.png" name="about" width="75" height="50" border="0" id="about2" /></a></div>
            <div id="process"><a href="../html/process.html" class="transition" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('process','','../new images/process_rollover.png',1)"><img src="../new images/process.png" name="process" width="75" height="50" border="0" id="process2" /></a></div>
            <div id="inside"><a href="../html/inside.html" class="transition" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('inside','','../new images/inside_rollover.png',1)"><img src="../new images/inside.png" name="inside" width="62" height="50" border="0" id="inside2" /></a></div>
            <div id="outside"><a href="../html/outside.html" class="transition" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('outside','','../new images/outside_rollover.png',1)"><img src="../new images/outside.png" name="outside" width="64" height="50" border="0" id="outside2" /></a></div>
            <div id="gallerybutton"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('gallerybutton','','../new images/gallery_rollover.png',1)"><img src="../new images/gallery.png" name="gallerybutton" width="64" height="50" border="0" id="gallerybutton2" /></a></div>
            <div id="blog"><a href="http://blog.arcangelmetalwork.co.uk/wordpress/" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('blog','','../new images/blog_rollover.png',1)"><img src="../new images/blog.png" name="blog" width="60" height="50" border="0" id="blog2" /></a></div>
            <div id="contact"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('contact','','../new images/contact_rollover.png',1)"><img src="../new images/contact.png" name="contact" width="64" height="50" border="0" id="contact2" /></a></div>
        </div>
      </div>
      <div id="line"><img src="../new images/rule.png" width="940" height="5" alt="rule" /></div>
      <div id="main_area">
        <div id="main_edit">
          <div id="introtext"><!-- TemplateBeginEditable name="EditRegion5" -->EditRegion5<!-- TemplateEndEditable --></div>
          <div id="space2"></div>
          <div id="gallery"><!-- TemplateBeginEditable name="gallery_edit" -->gallery_edit<!-- TemplateEndEditable --></div>
        </div>
        <div id="scroll"><img src="../new images/scrollshape.png" width="546" height="519" alt="scrollshape" /></div>
    <div id="footer">
      <div id="line2"><img src="../new images/rule.png" width="940" height="5" alt="rule" /></div>
      <div id="fb_logo"><a href="http://en-gb.facebook.com/people/Arcangel-Angelworks/100002407701392"><img src="../new images/facebook.png" width="42" height="43" alt="facebook logo" /></a></div>
          <!-- TemplateBeginEditable name="EditRegion4" -->
          <div id="FSB_logo"><img src="../new images/fsb-member-300 copy.png" width="40" height="49" alt="fsb logo" /></div>
        <!-- TemplateEndEditable --></div>
      </div>
    </div>
    <script type="text/javascript">
    $(document).ready(function() {
        $("body").css("display", "none");
        $("body").fadeIn(1500);
        $("a").click(function(event){
            event.preventDefault();
            linkLocation = this.href;
            $("body").fadeOut(2000, redirectPage);
        function redirectPage() {
            window.location = linkLocation;
    </script>
    </body>
    </html>

    Would it be possible to see this page uploaded somewhere?
    I'm thinking it has something to do with the combination of the two scripts.  For the onextrapixel transition can you provide a link to that one.
    And lastly this jumped out at me in your code:
    <script type="text/javascript" src="../html/jquery-page-transitions/js/jquery-1.6.4.min.js"></script >
      <script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.js"></script>
    For some reason you are including 2 different Jqueries.  You really shouldn't need this unless one of your scripts is using an older version and if 1.6.4 (the latest version) is working you can keep one or the other, but you don't need both.

  • IPhone screen flashing white/black/blue

    I have a 64GB iPhone 6 Plus, the phone is running the most recent version of iOS 8.
    I didn't drop the phone, get it wet or anything. All of sudden the screen started flashing black and white, and blue. I can still send receive texts, calls etc, sound is working fine. I just can't interact with the screen because it's flashing colors. It is very similar to the problem experienced by the user in this thread: iphone 6 plus screen flashing white and black
    I've already rebooted the device and tried plugging it into a computer (it wont recognize the phone because I've never plugged it into the computer before).
    I'm on vacation, at a wedding and I don't have access to an Apple Store. Is there ANYTHING I can do to get my phone to working order?

    Thanks for that info. I restore the phone without any data In the end (as a new device). In order to make the problem go away I had to:
    1. enter DFU
    2. Update device
    3. Restore device
    4. Setup as a new device
    It didn't work without completing all 4 of the steps. after setting it up as a new device it still flickered a bunch and the color were funny. Especially when looking at high definition photos. It was like it was threatening to start flashing black and white again. I turned the phone off for a while and then when I turned it back on it was fine. It's been fine since then. well see what hapPens.

  • Ipod nano 7th: Screen flashes white (turns off) and stops the music.

    I just got a brand new Ipod nano 7th: Less than 10 seconds after the song starts playing the screen flashes white, the apple logo shows up and it returns to 'home' screen. Battery is full. Tried to restart but that didnt help!
    What could be the problem?

    Hi joannefromhkg,
    If your iPod nano (7th generation) will not turn on at all I would suggest that you troubleshoot using the steps in this article - 
    iPod nano (7th generation): Hardware troubleshooting
    Specifically -
    Follow these steps if your iPod a power-related issue.
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting it while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Home button for at least six seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    And -
    Issue not resolved
    If the issue is still not resolved, please read this information on servicing your iPod.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • T400 screen flashes white once, won't start

    Whether I try turning it on with battery or AC, the same issue occurs. The indicator lights turn on but the screen flashes white and doesn't display a thing afterword. Something is definately broken, but what?

    You should methodically follow all the steps in Apple's article on Gray screen appears during startup.
    Good luck.

  • My ipod touch 4th generation has frozen whilst being turned back on. The apple logo has been on the screen and ever so often the screen flashes white and then black. How do I get it to unfreeze at this stage?

    My ipod touch 4th generation has frozen whilst being turned back on. The apple logo has been on the screen and ever so often the screen flashes white and then black. How do I get it to unfreeze at this stage?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How many times should my screen flash white after a restart?

    Every time I do a Restart on my 17" MacBook Pro, the screen goes black, then flashes white for a few seconds, and repeats over the next 2 - 3 minutes approx. 4 more times. I am used to seeing this process only once on my previous MacBook Pro's. Is this a common sequence?

    Every time I do a Restart on my 17" MacBook Pro, the screen goes black, then flashes white for a few seconds, and repeats over the next 2 - 3 minutes approx. 4 more times. I am used to seeing this process only once on my previous MacBook Pro's. Is this a common sequence?

  • Blackberry curve 8530 - startup problem, screen flashes white

    Whenever I try to start my phone this is essentially what happens. 
    I plug my phone into a charger, the red light lights up.
    Proceeds into the hourglass, then the screen partly flashes white. and then back to the red light.
    This then proceeds to happen forever.  Is there a fix? i've tried to update the software through desktop manager but there is always and error when i try this.  I use a mac and want to fix this asap.
    Thanks

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Unfortunately, most of the good "tricks" for recovering a BB work only on PC...not MAC.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • G3 screen flashing white and coulors. Help!

    Hi,please help
    the screen in my Ibook G3 starts to flashing white and somethings with a little bit of colour strips.
    I've format the hdd and put fresh copy of OS X 10.4.11 but it didn't help.
    do I need to get a new screen?
    Please help as this is my first mac got it just for few months and i love it
    Thanx

    Hi, Gary. Welcome to Apple Discussions.
    It sounds like you may be having logic board problems. Enough Dual USB G3 iBooks suffered from the logic board problem that Apple began the iBook Logic Board Repair Extension Program in January of 2004. Do the symptoms look familiar? After leaving it sit overnight, does squeezing the case to the left of the trackpad allow you to start up and work for a bit as long as you keep the pressure on it there? If so, you may want to consider trying the shim fix suggested by John Sawyer in the Apple Discussions iBook G3 (Dual USB) Displays Forum:
    [Y]ou can often fix this yourself by removing the iBook's bottom housing, and placing a shim of any sort, about 1mm to 1.5mm thick, onto the raised square on the bottom shield. I use a Scotch mounting square--you can get them in hardware stores and many grocery stores. When you reinstall the bottom case, it will press against this shim, which will press against the graphics chip, and may allow the chip to come into better contact with the logic board.
    John Sawyer
    CJS Macintosh Repair
    Instructions for removing the lower case:
    iFixit.com
    If the shim fix doesn't work (or you're leery of trying it), DT&T Services in Fremont, California offers the cheapest repair I've found. They have a six-month warranty on the repair.
    Once you get it fixed, try never to pick it up by the left front corner alone. The theory is that picking it up by the left front corner alone can contribute to logic board failure when the case flexes, causing the graphics chip to come loose from the logic board. If you're picking it up in your left hand (as I often do mine), pick it up in the center under the trackpad.
    Good luck.
    Please note: As a G3 iBook is quite old at this point, if you are faced with paying a repair bill on it, it may be wiser to put that money toward a new (or used) MacBook. They are quite a spectacular upgrade from the iBook G3. Again, good luck with whatever you decide to do.

  • My iPod won't turn on and the screen flashes white

    the other day while using my ipod it all of a sudden reset and a diagnostics screen appeared and it started running all of these tests after which it stopped working. i then proceeded to plug it into my computer which recognized it and, after disconnecting, worked for about 10 minutes before it kept flashing in between the apple screen and the low battery screen. after a little of that it shut off completely until i plugged it back into my computer. After plugging it back in the screen lit up white and stayed lit until unplugged. once unplugged it flashes white every few seconds and thats it. my computer no longer recognizes it and restarting/reseting does not work. i could use all the help i can get. thanks.

    Any help here?
    iPod 5th gen (with video) shows blank or white screen.

  • 3rd gen screen flashes white

    iPod 3rd Gen model: mc008ll/a.  It was working, then sudden screen went SOLID WHITE.  Now, after not holding a charge, the screen flashes on and off (still solid white) while connected to my MacBook Pro.  I'm pretty sure its "dead" but if there's anything I can do

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • New Macbook Pro 15-inch Retina screen flashes white intermittently

    I have a new Macbook Pro 15-inch Retina with 2.8 GHz Intel Core i7, 16GB RAM, and 1TB SSD.
    Running OS X version 10.9.5.
    Problem: the screen intermittently flashes to white very briefly (for a fraction of a second). This happens once or twice a day. I haven't yet found a way to reproduce the flashing. It happens both on the highest resolution and on the "Best" resolution.
    Is there a way to fix this or should I return the MBP?

    Hi ppa2013,
    If you are having an issue with your MacBook Pro's internal display flashing, I would suggest that you troubleshoot using the steps in this article - 
    Apple computers: Troubleshooting issues with video on internal or external displays
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Iphone 6 plus screen flashing white and black

    My iPhone 6 Plus 16Gb suddenly started to show screen artifacs, like flashing with white and black, so I can't see the springboard only black and white screen. Restart of the phone didn't help. Even when the phone is booting, Apple logo doesn't appear and then again flashes. As it seems on background everything is working, as I can receive sms and phone calls. It is just the screen. iPhobe 6 Plus is brand new, I've been using it for 1 week and it never dropped. No physical damage, no nothing, just flashing

    Have you tried a Reset by holding down the Sleep / Wake Button and the Home Button at the same time until the white Apple logo appears, then let go of the buttons, but wait until the Reset completes and you are back at your lock-screen?  If this doesn't work then do you have a computer with the current version of iTunes?  If yes and you already have a Backup of your Media and Data on iCloud or iTunes, then you can put the iPhone in DFU Mode.  Don't do this unless you have a Backup and also have a computer with the latest iTunes.  You will need your Apple ID and Password.  To go to DFU Mode you can hold the Home button while you plug the Lightning Cable into the iPhone, a graphic will appear on the iPhone screen showing that you need to connect to iTunes.  At that point just connect the iPhone via the Lightning Cable with USB into your Computer.  Open the iTunes App on the Computer and wait until a button appears representing the connected iPhone.  Then click on the iPhone button on the iTunes screen and it should open to the Summary page.  At that point you can Restore the iPhone to Factory Settings and bring it up as A New Phone.  The iPhone should screen should then show Hello and you will need to connect to your WiFi via your Router WiFi Password and then answer all the question put forth by the iPhone.  When the "Lets Get Started" occurs you can thoroughly check out the iPhone to make sure it is all OK.  When satisfied that things are good, you can plug into the computer and iTunes and this time Restore from Backup.  or if you Backup is in iCloud you can Restore over the air. 

  • G5 Grey screen & flashing white square after start-up & unresponsive key.

    After pressing the start button on my G5, instead of the usual blue start-up screen I got a grey screen with a small white square with a blue earth-globe, that flashed on & off. This eventually turned into a small folder with a finder face alternating with a ? mark. 10 attempts (over 1/2 hr) at switching on & off got no-where, so I left the grey screen going and after 10 minutes the G5 suddely went into the blue screen loading mode & then my chosen desktop picture. All apps seem to be OK.
    I have not had this experience with my 2 year old flat panel G4 & I am wondering if I should do something remedial to prevent this happening again? The question is What? I am relectant to turn the G5 off in case I get a re-run so will leave it to sleep pro tem.
    I have had this Mac for about 5 months from new & it has behaved itself until now. I am a novice so would welcome any help.
    Thanks - Terry Wallis.

    Terry,
    Personally, I have always put the computer to sleep as I have been told this is less stressful for the hardware than a restart from a cold shutdown. I haven't had any hardware problems with this iMac G3 since new in 2001 so I tend to agree with this practice.
    A good FAQ by Dr. Smoke of the X-Lab for OS X maintenance can be found here which dispells many of the maintenance myths that some follow.
    littleshoulders [:-)

Maybe you are looking for

  • HP Photosmart C8180 Windows 7 64-bit

    HP PHotosmart C8180   Windows 7 64 bit       Serial Number {Removed for privacy} My Photosmart printer began giving me error codes...ink system failure, B83024C6, and many others....flashing and blinking lights constantly.  We tried all the resets, c

  • CS6 Multicam Edit - Is there a way to turn off some camera angles when the system gets strained?

    I'm doing a multicam edit in cs6 and the 5 camera angles I have are straining my system.  I have two main angles and three kind of back up go pro angles that I don't need most of the time.  But I don't want to get rid of them either.  Is there a way

  • Sql function or sql procedure

    I want to know if is better to use function or procedure for my problem. First i need to read sql -> SELECT name, surname, date FROM ZKET_ZAPOSLENCI to get all data When i get all data i need to use name and surname and change it with $name and $surn

  • How to implement a connection pooling in servlet

    hi all, how to implement a connection pooling in servlet.i want to know how to implement it in tomcat in a struts based environment. any input to the topic is appreciated. Thanks Sudha

  • PyPanel: Clicking task doesn't restore focus

    When I click a task in the PyPanel bar, it doesn't have focus restored to it. It gets brought to the front of all my windows, but without focus. My .pypanelrc has def taskButtonEvent(pp, button, task): """ Button event handler for the panel's tasks "