Screen flashing in Windows 8.1

I've just gotten a refurbished Pavilion 17.3' laptop with Windows 8.1 preinstalled. When I'm in the main window, the screen flashes briefly several times a minute. Except for the momentary blanking, the display is correct. I've also installed kubuntu Linux as a dual boot, and Kubuntu shows no sign of this problem. Since the problem showed up before I installed Kubuntu, I know Kubuntu isn't the cause of it.
I tried downloading and installing a replacement video driver via the HP website, but that didn't make any difference. But it did reveal another puzzle. The webside lists 3 different video drivers, but they all have the same version number, the same date, and the same description (but not the same size). They are found at:
http://support.hp.com/us-en/product/HP-Pavilion-17-f000-Notebook-PC-series/6936220/model/7242189/dri...
Why are they different? And which is the correct one for my computer?

@pwabrahams ,
Hello and thank you for posting on the HP support forums. If each driver is the same file name and same date but have different file sizes. What you will want to do is to download each one and save it to an external memory device.
Once you have the drivers downloaded boot your system into safe mode.
Windows 8 Safe Mode
Now in safe mode uninstall the driver for your video.
When the driver is removed boot back into windows normally and install the driver.
Try all three drivers. If all have the same issue you will need to do a repair. For that you will need to contact HP phone support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Please let me know how this goes for you.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Similar Messages

FX5200-T128 Screen flash on log in....

Hi there,
Just purchased the MSI FX5200-T128 card and installed with a new installation of XP and supplied drivers. Upon log in with any user the screen flashes twice, then logs in. Also when I go to the display settings and go to the FX5200 tab the screen flashes. Windows update indicated that I needed a new driver signed in July (I think) so I downloaded these. These were 45.23. After installation of these, hitting the display manager toolbar icon causes the screen to flash, as well as retaining the previous flashing problems!
This morning I have downloaded the 45.33 drivers with the same results.
Any ideas why my screen keeps flashing!?
Thanks in advance,
Mark
Athlon XP 2000
Gigabyte GA-7VRXP
1024Mb PC2700
MSI FX5200-T128

I have another problem. I know that support for this card is poor with the current XFree and have downloaded the run file from Nvidia. I have a new HD and started to boot Mandrake 9.0 from CD. It got as far as hitting enter to start the install....then the screen went blank and that was it....
So now I have problems in both Linux and WinXP!!
Any help would be much appreciated,
Mark

Boots to windows startup screen, flashes blue screen, restarts and repeats

HP ENVY H8-1414 Product #H3Z00AAR
Windows 7 Ultimate 64-bit
Alright, so here is my issue. I turn on my pc and it gets as far as the windows startup screen, flashes a blue screen error for about half of a second and then restarts it self. My HDD is recognized in the bios. Tried a memory test in diagnostics and it passes. Tried a hard disc check and it passes the SMART check but fails the Long DST with a failure ID of 0GF21L-0006LR-WPVX0K-61C703 (no idea if those a zeros or O's)
I've also tried the startup repair but it did nothing. So I removed the hard drive and tried to use it in a different PC but had the same issue so I figured the hard drive went bad. Then I tried formatting a spare hard drive and installed a fresh copy of windows 7 on it, tried it on a different PC and it works just fine. However, when I try to use that hard drive on the HP ENVY I get the exact same problem even though it worked just fine on a differenct pc.
I purchased this PC refurbished about 3 months ago, the warrenty just ended a week ago. There have been no hardware or software changes on it at all. This thing worked flawlessly last night... I locked the computer before bad and I woke up to this. No power outages over night or anything. It just doesn't make any sense.

Here are the specs for your HP ENVY h8-1414 Desktop Computer. According to the specs, this model came from the factory with Windows 8 installed. The "blue screen" and restart are normal for Windows 7, when it encounters an error, unless you have altered the default settings.
The LONG DST failure is indicative that the hard drive has failed or is about to fail. Unless the hard drive is moved to an identical or very similar computer, Windows will encounter a "blue screen. This is true with the original hard drive moving from the h8 computer to the other computer and the test hard drive from the other other computer moving to the h8 computer.
Try placing the "test" hard drive in the h8 computer and installing Windows 7 from a DVD or USB stick. If you have any problems, please post back with full error messages and screen shots. Also indicate what stage of the install Windows 7 was doing tat the time.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

IPhone 4s on screened Window Sill on rainy night - BLACK SCREEN, FLASH ON, VIBRATING, how do I revive?

Lastnight I left my Iphone 4s CHARGING on a screened window sill.
I wokeup at 8:30 and checked my phone to see that it was completely fine; went back to sleep until 10:30 and woke up to a black screen, flash on, and the phone frequently and randomly vibrating.The phone was not overly drenched. Only a couple raindrops on it, and around it.
I immediately stuck it in a bag of rice.
I need solutions! Any help is appreciated!
How long should I keep it in the bag of rice?
Is there a way to turn off my phone with a black screen?
Thank you for your help!

Just wind it by dryer and then don't try to switch it off because any electrical interchange cause damage. and then put it in a rise bucket. and in few hours it shuld be fine.. or take it to apple store if you are still in Warranty...

FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ? Any solution * Advance Thanks

FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ?
Any solution * Advance Thanks

FCP X will import into separate clips every time it detects a scene change (as when you stopped and started recording in the camera). There is no option to avoid this, as far as I known.
You may try importing from camera using Quicktime Player X and then bringing the imported file into FCP X.

I need help with Windows 10 Technical Preview. No sound. Korean files. Screen Flashes

I installed Windows 10 Technical Preview Yesterday. Took TEN hours!
Now, I have NO SOUND. There are Korean files on my desktop. My screen flashes from blue to my desktop. It is SLOW.
I had Windows 8 before this. I bought this laptop brand new from a store in January of this year.
Can someone help me either fix the issues or help me get back to Windows 8?

it came with windows 8.1 then, the windows 10 preview is still kinda early in the curve so it may have a few problems with your machine
probably be best to wait till the summer when its ready
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Vegan Advocate How can you be an environmentalist and still eat meat?

Screen flashes between desktop and blue windows 8.1

Just spent time with windows support but no solution yet. After logging in laptop screen flashes between desktop and Blue screen - Windows 8.1. This does not happen in Safe Mode The windows support person was trying to get me to update drivers but all the install options on HP site don't work in Safe Mode. Please help.

Just spent time with windows support but no solution yet. After logging in laptop screen flashes between desktop and Blue screen - Windows 8.1. This does not happen in Safe Mode The windows support person was trying to get me to update drivers but all the install options on HP site don't work in Safe Mode. Please help.

I have windows 8 and just downloaded photoshop CS6. Why is my screen flashing with any tool?

I have windows 8 and just downloaded photoshop CS6. Why is my screen flashing when using tool and keyboarding?

It's a common problem with Windows 8. You need to update your video card driver, from the card maker's site.

Satellite A500-19x - Suddenly blue screen appears in Windows 7

I have satellite a500-19x,
There are one problem every time and every days when i working.
Suddenly the windows stopped for several moments then blue screen and restart windows .

hi,
if you want to update your Bios, go to the Toshiba driver page and choose the appropriate Bios version for you model. Download it and run. Don't forget to close all the running programs, disable Antivirus, Firewall before running it. Then, you will be asked to restart the computer. Pray that Bios process would occur properly otherwise you will have blank screen on startup. In this case, you will have to contact TASP (Toshiba authorized service provider).
To be honestly, I don't recommend you to flash the Bios, in your case it doesn't help your in audio crackling and BSOD. I updated my BIos but it didn't fix the problem. I think, it's graphic driver issue.You can go to the nvidia.com and download a new graphic card driver released recently. Install it and check. I also had audio crackling and the system freezing that gone after updating that driver. Note, that driver isn't pretested by Toshiba (not modified for overheating protection, anyway the users say this in the forum) but install it at my own risk and still have no problems.
greets

I5 17''MBP gets blue screen during install windows 7 32 bit

Hello all:
I heard that quite many people get classic windows' "blue screen" during using windows , whatever Windows XP, Vista or 7. But now i face the "blue screen" during install Windows 7, which means I even can not complete installation.
I bought my Macbook Pro i5 17'' one month ago, and I'm trying to install Windows 7 but I face the problem during the installation. After finishing first 4 steps the computer would restart and start to "finish installation", but at this time it gets "blue screen" and shows "error: 0x0000009c" and stuck there. I have to shut down the turn off button and interrupt the installation.
I don't know if there's any one else face this unlucky situation. I searched on the net and it says the problem could be from memory, graphic card (too new), or even overlocking the cpu,whatever it must be the problem of hardware. I thought it might be the problem of compatible.
If anyone knows how to deal with this problem??!! I do need to use some software under Windows system!

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

PSE7 Organizer does not start properly, screen flashes, PC stops

Hello. I can't find this problem mentioned on the forum.
I've used PSE4 and 5 in the past without problems. Have just completed a clean install of PSE7 (no PS or PSE previously installed on this system, a ThinkPad T60 with 2MB). The Editor runs fine.
I ran the Organizer once, set some preferences, pointed it at a small number of images to import, then the whole screen started flashing and soon my system stopped in its tracks - no blue screen.
Now, when I try and start the Organizer, it spends maybe half a minute "Generating thumbnails" without success (all the thumbnails have egg timers on them). It uses 50% CPU. It still says "Generating thumbnails" after half a minute or so when the screen starts flashing and the system crashes again.
Any ideas?

Fixed. Thank you John.
I renamed the preferences file but that made no difference.
So I repaired the catalog (errors were found) and optimized it. When I started the Organizer, thumbnails were displayed (that's progress) but then the screen-flashing started again (whole screen, as usual, not just the Organizer window). Before I could close the Organizer, my system stopped with a blank, black screen, and no response to any input. I had to hold the power button to power down. On reboot, it blue-screened. On next reboot it started normally.
So I created a new catalog and the Organizer started fine. Then I set it off getting photos from a folder of folders of jpegs (with the odd txt and other file type). After a few seconds, the screen-flashing started again, and I quickly closed the Organizer.
When I restarted it, the catalog was empty, so I had it get just one folder of photos at a time. On the very last one, the problem started again. I found an AVI file that I'd overlooked, removed it, and the problem went away. The AVI was one I recorded on a digital compact.
The Help for Organizer says:
"The Organizer catalogs video AVI files properly, but audio AVI files are shown as broken video thumbnail icons. However, they will play correctly."
Hmmm...doesn't seem to be the case for me. Even if AVIs were unsupported or known to cause problems, I would never expect to see the symptoms I did.
Hopefully my experience will help others. Incidentally, I run XP Pro SP3, fully updated.

Screen flashing/black screen for 1-2 seconds - 7850 power edition 2gb/OC

I recently bought the MSI R7850 Power Edition 2GD5/OC. I have installed amd catalyst 12.10. I have no issues while playing games...the only game i have played since i bought the card is prototype 2 (all settings set to high). The problem is while browsing or when not playing my screen flashes (just once - screen becomes black) for about 1-2 seconds. This does not happen regularly, but quite a few times.. i have uninstalled and re-installed the same catalyst version twice (downloaded from different sources - one from msi and the other from amd). The problem still persists.
Board: ASUS P8-H67-M PRO
VGA: MSI R7850 Power Edition 2GB DDR5/OC
PSU: Cooler Master GX550 550W (44a 12v rail)
Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W
MEM: Corsair 1333 8gb (2x4gb)
HDD: Seagate 500 GB 7200 rpm
Thanks.
OS: Windows 7 64bit ultimate.

I've experienced the same issue exactly as described, with the R7850 Twin Frozr OC Edition. However, I've also experienced a crash or 2 in which the screen goes black and the monitor goes to sleep. The computer doesn't wake up and I'm forced to do a hard reset. One such event was severe enough that I was unable to restore Windows 8 and had to do a full reinstall...!)
Everything is clocked at factory default, passes Memtest 86+, Prime95 overnight run, even FurMark successfully...
Board: ASUS P8Z77-M
Bios: American Megatrends Inc., v1708
VGA: MSI R7850 Twin Frozr III 2GD5/OC
PSU: Seasonic X-750 (+12V@62A)
CPU: Intel Core i5-3750K
MEM: Samsung DDR3 PC1600 8GB (2x4GB)
HDD: WD 500 GB 7200rpm
COOLER: GPU: Stock. CPU: Xigmatek SD1283 Gaia w/Scythe 120mm Slipstream PWM
Sound card: Creative SoundBlaster X-Fi XtremeGamer
OC: No overclocking, factory default.
OS: Windows 8 Pro, 64-bit
When I tried to save the GPU-Z BIOS settings to a file, my computer crashed my computer (!)... Hopefully this is sufficient to indicate if I should follow the same steps or if this is a different issue / hardware issue / ???
TechPowerUp GPU-Z 0.6.7
Driver Version: atiumdag 9.2.0.0 (Catalyst 12.10) / Win8 64
BIOS Version: 015.017.000.000.000861 (113-C4030400-100)
edit:
S/N: 602-V273-010B1210251006
Also updated format of table above
(Perhaps worth noting that the box didn't include any driver CD for some reason)
Thanks for the help.
-DH

Can't open "special characters" in any Edit menu; have a constantly flashing empty window labelled 'characters' that i can't stop. window flashes then disappears every time i click on anything. any suggestions? tru thanx !

i can't open "special characters" in any Edit pull down menu. i have a constantly flashing empty window labelled 'characters' that i haven't been able to stop.
it appears every time i click on anything. any suggestions? tru thanx

I, too, have found Bridge very unstable. I find this to be extremely disappointing, seeing as it's literally the most expensive piece of software I've ever purchased for personal use. I've seen these two symptoms:
1. When running in full screen mode, Bridge crashes periodically. This happened on Vista, so I blamed Vista (of course), but even after regressing to XP SP2, I see the same symptoms.
2. Although I didn't see this on Vista, running on XP I see the problem described earlier in this thread, where clicking on a thumbnail displays the wrong image preview. When this happens the image displayed is one from a different folder! I solve the problem by clearing the cache, and it's OK for a while, but the problem keeps returning.
3. Even when exiting cleanly from Bridge (using File->Exit), Bridge often forgets where I was working in my previous session. I need to re-navigate from the very top level directory down through the hierarchy to my photo directory.
Again, it's very disappointing to invest so much in a single software package only to see such basic operations malfunction.

View in browser - screen flashes white

Although I'm fairly new to CS5, all has been going well til now. New site, whilst testing in Google Chrome and Safari, when loading between html pages, the screen flashes white. I'm using a couple of jsQuery - one is Galleria, the other is page transitions from onextrapixel.com . Haven't experienced this with any other site I've done. Would appreciate any words of wisdom.
Thanks
K
This is my template coding:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<script type="text/javascript" src="../html/jquery-page-transitions/js/jquery-1.6.4.min.js"></script>
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.js"></script>
<script src="galleria/galleria-1.2.5.min.js"></script>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

<title>Arcangel Metalwork Bespoke Makers and Sculptors Hertfordshire</title>



<link href="../CSS styles/arcangelwelcome.css" rel="stylesheet" type="text/css" />
<style type="text/css">
html {
    /*If you had a black or close to black background*/
    background-color: #645F6B;
body {
          background-color: #645F6B;
          background-image:url(../new%20images/webbackground.jpg);
          background-repeat: repeat;
#apDiv1 {
          position:absolute;
          width:200px;
          height:115px;
          z-index:1;
#main_area {
          position:relative;
          width:945px;
          height:663px;
          z-index:14;
          left: 15px;
          top:0px;
#main_edit {
          position:absolute;
          width:939px;
          height:576px;
          z-index:15;
#footer {
          position:absolute;
          width:940px;
          height:80px;
          z-index:15;
          left: 7px;
          top: 586px;
#fb_logo {
          position:absolute;
          width:55px;
          height:65px;
          z-index:16;
          left: 4px;
          top: 13px;
#fb_link {
          position:absolute;
          width:269px;
          height:51px;
          z-index:16;
          left: 77px;
          top: 6px;
#FSB_logo {
          position:absolute;
          width:49px;
          height:55px;
          z-index:16;
          left: 65px;
          top: 14px;
#scroll {
          position:absolute;
          width:547px;
          height:560px;
          z-index:14;
          left: 393px;
          top: 51px;
a:visited {
          text-decoration: none;
a:hover {
          text-decoration: none;
a:active {
          text-decoration: none;
</style>
<script type="text/javascript">
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
</head>
<body onload="MM_preloadImages('../new images/home_rollover.png','../new images/about_rollover.png','../new images/process_rollover.png','../new images/inside_rollover.png','../new images/outside_rollover.png','../new images/gallery_rollover.png','../new images/blog_rollover.png','../new images/contact_rollover.png')">
<div id="container">
<div id="header">
      <div id="Alogo"><img src="../new images/Logo.png" width="178" height="122" alt="logo" /></div>
      <div id="space"></div>
      <div id="navigation">
        <div id="home"><a href="../html/home.html" class="transition" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('home','','../new images/home_rollover.png',1)"><img src="../new images/home.png" name="home" width="60" height="50" border="0" id="home2" /></a></div>
        <div id="about"><a href="../html/about.html" class="transition" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('about','','../new images/about_rollover.png',1)"><img src="../new images/about.png" name="about" width="75" height="50" border="0" id="about2" /></a></div>
        <div id="process"><a href="../html/process.html" class="transition" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('process','','../new images/process_rollover.png',1)"><img src="../new images/process.png" name="process" width="75" height="50" border="0" id="process2" /></a></div>
        <div id="inside"><a href="../html/inside.html" class="transition" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('inside','','../new images/inside_rollover.png',1)"><img src="../new images/inside.png" name="inside" width="62" height="50" border="0" id="inside2" /></a></div>
        <div id="outside"><a href="../html/outside.html" class="transition" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('outside','','../new images/outside_rollover.png',1)"><img src="../new images/outside.png" name="outside" width="64" height="50" border="0" id="outside2" /></a></div>
        <div id="gallerybutton"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('gallerybutton','','../new images/gallery_rollover.png',1)"><img src="../new images/gallery.png" name="gallerybutton" width="64" height="50" border="0" id="gallerybutton2" /></a></div>
        <div id="blog"><a href="http://blog.arcangelmetalwork.co.uk/wordpress/" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('blog','','../new images/blog_rollover.png',1)"><img src="../new images/blog.png" name="blog" width="60" height="50" border="0" id="blog2" /></a></div>
        <div id="contact"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('contact','','../new images/contact_rollover.png',1)"><img src="../new images/contact.png" name="contact" width="64" height="50" border="0" id="contact2" /></a></div>
    </div>
</div>
<div id="line"><img src="../new images/rule.png" width="940" height="5" alt="rule" /></div>
<div id="main_area">
    <div id="main_edit">
      <div id="introtext">EditRegion5</div>
      <div id="space2"></div>
      <div id="gallery">gallery_edit</div>
    </div>
    <div id="scroll"><img src="../new images/scrollshape.png" width="546" height="519" alt="scrollshape" /></div>
<div id="footer">
<div id="line2"><img src="../new images/rule.png" width="940" height="5" alt="rule" /></div>
<div id="fb_logo"><a href="http://en-gb.facebook.com/people/Arcangel-Angelworks/100002407701392"><img src="../new images/facebook.png" width="42" height="43" alt="facebook logo" /></a></div>
      
      <div id="FSB_logo"><img src="../new images/fsb-member-300 copy.png" width="40" height="49" alt="fsb logo" /></div>
    </div>
</div>
</div>
<script type="text/javascript">
$(document).ready(function() {
    $("body").css("display", "none");
    $("body").fadeIn(1500);
    $("a").click(function(event){
        event.preventDefault();
        linkLocation = this.href;
        $("body").fadeOut(2000, redirectPage);
    function redirectPage() {
        window.location = linkLocation;
</script>
</body>
</html>

Would it be possible to see this page uploaded somewhere?
I'm thinking it has something to do with the combination of the two scripts. For the onextrapixel transition can you provide a link to that one.
And lastly this jumped out at me in your code:
<script type="text/javascript" src="../html/jquery-page-transitions/js/jquery-1.6.4.min.js"></script >
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.js"></script>
For some reason you are including 2 different Jqueries. You really shouldn't need this unless one of your scripts is using an older version and if 1.6.4 (the latest version) is working you can keep one or the other, but you don't need both.

My thunderbolt screen flashes when hooked up to macbook pro after downloading new lion software

does anyones monitor flash when using new lion software and thunderbolt monitor

You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor.

Screen flashing in Windows 8.1

Similar Messages

Maybe you are looking for