Screen Flickering Everytime After Updating Synaptics Touchpad Driver And Touchpad Not Working

I have a HP ENVY 4 1023tu Notebook with Windows 8 Pro. I always keep my pc updated. But whenever i try updated the synaptics touchpad driver through availabe updates by hp support assistant, the screen starts to flicker(Start screen and settings bar at the right) and touchpad doesn't work . The external works fine. Then I have to roll back the driver . then it comes to normal. If the driver update is meant to be updated then why its not supporting...

I had the same problem as you with my Hp Probook 450 and I think I found a cause of the problem. I installed Windows 8.1 on it, and when I tried to install touchpad driver, after system restart my screen was blank. My problem is in AMD Radeon graphics card integrated in laptop. When I installed touchpad driver, the graphics driver somehow updated too. The problem is, that AMD only have beta driver for Windows 8.1, while the old one isn't good. So I had to start computer in safe mode and disabled graphics card in Windows device manager. Then I downloaded that beta driver and installed it (still with some small problems) So, the beta driver also isn't perfect, but it will help until they release final version. So I hope that helps you, or anyone, that might have similar problems.

Similar Messages

After update my memory card slot is not working

after update my memory card slot is not workingplease help me

Hi!, SHAIKE: Welcome, to Forum !. For help you, is necessary what, indicate brand, model and Operating System of your device.

I have updating my Apple TV and now not working

HI I have updating my Apple TV but now not working.
what can i do?

I also had the same issue - Apple TV is pointing to connect to iTunes - when I did it iTunes did not recognize the AppleTv - not sure what is the trouble here.

[Solved]Synaptics Touchpad not working at all on Fujitsu Siemens UH552

Hi,
I have just installed Arch on my Fujitsu Siemens UH552 laptop. Everything works except for the touchpad which seems to get loaded by Xorg, but when in X it doesn't work. I have tried both using /dev/input/event* and /dev/input/mouse0 as device paths, neither works.
xf86-input-evdev and xf86-input-synaptics are installed.
I have tried running both with the default 10-evdev.conf, with 10-synaptics.conf, with both, and without both.
TLDR SOLUTION: https://bbs.archlinux.org/viewtopic.php … 3#p1189603
My current 10-synaptics.conf:
Section "InputClass"
Identifier "Touchpad Catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Xorg.0.log
[ 2275.127]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 2275.130] X Protocol Version 11, Revision 0
[ 2275.131] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 2275.132] Current Operating System: Linux corvo 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
[ 2275.132] Kernel command line: root=/dev/sda2 rootflags=subvol=__active ro initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux
[ 2275.134] Build Date: 27 August 2012 08:04:39AM
[ 2275.135]
[ 2275.136] Current version of pixman: 0.26.2
[ 2275.138] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2275.138] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2275.142] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 13:16:01 2012
[ 2275.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2275.144] (==) No Layout section. Using the first Screen section.
[ 2275.144] (==) No screen section available. Using defaults.
[ 2275.144] (**) |-->Screen "Default Screen Section" (0)
[ 2275.144] (**) | |-->Monitor "<default monitor>"
[ 2275.144] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2275.144] (**) | |-->Device "Intel Graphics"
[ 2275.144] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2275.144] (==) Automatically adding devices
[ 2275.144] (==) Automatically enabling devices
[ 2275.144] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2275.144] Entry deleted from font path.
[ 2275.144] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2275.144] Entry deleted from font path.
[ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2275.144] Entry deleted from font path.
[ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2275.144] Entry deleted from font path.
[ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2275.144] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2275.144] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2275.144] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2275.144] (II) Loader magic: 0x7c8b00
[ 2275.144] (II) Module ABI versions:
[ 2275.144] X.Org ANSI C Emulation: 0.4
[ 2275.144] X.Org Video Driver: 12.1
[ 2275.144] X.Org XInput driver : 16.0
[ 2275.144] X.Org Server Extension : 6.0
[ 2275.144] (--) PCI:*(0:0:2:0) 8086:0166:10cf:16c2 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00002000/64
[ 2275.144] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2275.144] (II) LoadModule: "extmod"
[ 2275.144] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2275.145] (II) Module extmod: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension MIT-SCREEN-SAVER
[ 2275.145] (II) Loading extension XFree86-VidModeExtension
[ 2275.145] (II) Loading extension XFree86-DGA
[ 2275.145] (II) Loading extension DPMS
[ 2275.145] (II) Loading extension XVideo
[ 2275.145] (II) Loading extension XVideo-MotionCompensation
[ 2275.145] (II) Loading extension X-Resource
[ 2275.145] (II) LoadModule: "dbe"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2275.145] (II) Module dbe: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension DOUBLE-BUFFER
[ 2275.145] (II) LoadModule: "glx"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2275.145] (II) Module glx: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (==) AIGLX enabled
[ 2275.145] (II) Loading extension GLX
[ 2275.145] (II) LoadModule: "record"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2275.145] (II) Module record: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.13.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension RECORD
[ 2275.145] (II) LoadModule: "dri"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2275.145] (II) Module dri: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension XFree86-DRI
[ 2275.145] (II) LoadModule: "dri2"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2275.145] (II) Module dri2: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.2.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension DRI2
[ 2275.145] (II) LoadModule: "intel"
[ 2275.146] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2275.146] (II) Module intel: vendor="X.Org Foundation"
[ 2275.146] compiled for 1.12.3.901, module version = 2.20.5
[ 2275.146] Module class: X.Org Video Driver
[ 2275.146] ABI class: X.Org Video Driver, version 12.1
[ 2275.146] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+)
[ 2275.146] (--) using VT number 7
[ 2275.149] drmOpenDevice: node name is /dev/dri/card0
[ 2275.149] drmOpenDevice: open result is 7, (OK)
[ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 7, (OK)
[ 2275.150] drmOpenByBusid: drmOpenMinor returns 7
[ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 8, (OK)
[ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 8, (OK)
[ 2275.150] drmOpenByBusid: drmOpenMinor returns 8
[ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2275.150] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2275.150] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2275.150] (==) intel(0): RGB weight 888
[ 2275.150] (==) intel(0): Default visual is TrueColor
[ 2275.150] (**) intel(0): Option "AccelMethod" "sna"
[ 2275.150] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 2275.151] (**) intel(0): Framebuffer tiled
[ 2275.151] (**) intel(0): Pixmaps tiled
[ 2275.151] (**) intel(0): 3D buffers tiled
[ 2275.151] (**) intel(0): Throttling enabled
[ 2275.151] (**) intel(0): Delayed flush enabled
[ 2275.151] (**) intel(0): "Tear free" disabled
[ 2275.151] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 2275.151] (II) intel(0): Output LVDS1 has no monitor section
[ 2275.152] (II) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 2275.152] (II) intel(0): Output VGA1 has no monitor section
[ 2275.153] (II) intel(0): Output HDMI1 has no monitor section
[ 2275.193] (II) intel(0): Output DP1 has no monitor section
[ 2275.193] (II) intel(0): EDID for output LVDS1
[ 2275.193] (II) intel(0): Manufacturer: LGD Model: 371 Serial#: 0
[ 2275.193] (II) intel(0): Year: 2012 Week: 0
[ 2275.193] (II) intel(0): EDID Version: 1.3
[ 2275.193] (II) intel(0): Digital Display Input
[ 2275.193] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 2275.193] (II) intel(0): Gamma: 2.20
[ 2275.193] (II) intel(0): No DPMS capabilities specified
[ 2275.193] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2275.193] (II) intel(0): First detailed timing is preferred mode
[ 2275.193] (II) intel(0): redX: 0.589 redY: 0.347 greenX: 0.343 greenY: 0.555
[ 2275.193] (II) intel(0): blueX: 0.160 blueY: 0.124 whiteX: 0.313 whiteY: 0.329
[ 2275.193] (II) intel(0): Manufacturer's mask: 0
[ 2275.193] (II) intel(0): Supported detailed timing:
[ 2275.193] (II) intel(0): clock: 70.0 MHz Image Size: 293 x 165 mm
[ 2275.193] (II) intel(0): h_active: 1366 h_sync: 1402 h_sync_end 1438 h_blank_end 1476 h_border: 0
[ 2275.193] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 780 v_blanking: 790 v_border: 0
[ 2275.193] (II) intel(0): LG Display
[ 2275.193] (II) intel(0): LP133WH2-TLF1
[ 2275.193] (II) intel(0): EDID (in hex):
[ 2275.193] (II) intel(0): 00ffffffffffff0030e4710300000000
[ 2275.193] (II) intel(0): 00160103801d10780afc359658578e29
[ 2275.193] (II) intel(0): 1f505400000001010101010101010101
[ 2275.193] (II) intel(0): 010101010101581b566e500016302424
[ 2275.194] (II) intel(0): 480025a5100000190000000000000000
[ 2275.194] (II) intel(0): 00000000000000000000000000fe004c
[ 2275.194] (II) intel(0): 4720446973706c61790a2020000000fe
[ 2275.194] (II) intel(0): 004c503133335748322d544c463100ce
[ 2275.194] (II) intel(0): EDID vendor "LGD", prod id 881
[ 2275.194] (II) intel(0): Printing DDC gathered Modelines:
[ 2275.194] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
[ 2275.194] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Printing probed modes for output LVDS1
[ 2275.194] (II) intel(0): Modeline "1366x768"x60.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
[ 2275.194] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2275.194] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2275.194] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2275.194] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2275.194] (II) intel(0): EDID for output VGA1
[ 2275.195] (II) intel(0): EDID for output HDMI1
[ 2275.236] (II) intel(0): EDID for output DP1
[ 2275.236] (II) intel(0): Output LVDS1 connected
[ 2275.236] (II) intel(0): Output VGA1 disconnected
[ 2275.236] (II) intel(0): Output HDMI1 disconnected
[ 2275.236] (II) intel(0): Output DP1 disconnected
[ 2275.236] (II) intel(0): Using exact sizes for initial modes
[ 2275.236] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 2275.236] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2275.236] (**) intel(0): Display dimensions: (290, 160) mm
[ 2275.236] (**) intel(0): DPI set to (119, 121)
[ 2275.236] (II) Loading sub module "dri2"
[ 2275.236] (II) LoadModule: "dri2"
[ 2275.237] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2275.237] (II) Module dri2: vendor="X.Org Foundation"
[ 2275.237] compiled for 1.12.4, module version = 1.2.0
[ 2275.237] ABI class: X.Org Server Extension, version 6.0
[ 2275.237] (==) Depth 24 pixmap format is 32 bpp
[ 2275.237] (II) intel(0): SNA initialized with IvyBridge backend
[ 2275.237] (==) intel(0): Backing store disabled
[ 2275.237] (==) intel(0): Silken mouse enabled
[ 2275.237] (II) intel(0): HW Cursor enabled
[ 2275.237] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2275.238] (==) intel(0): DPMS enabled
[ 2275.239] (II) intel(0): [DRI2] Setup complete
[ 2275.239] (II) intel(0): [DRI2] DRI driver: i965
[ 2275.239] (II) intel(0): direct rendering: DRI2 Enabled
[ 2275.239] (==) intel(0): hotplug detection: "enabled"
[ 2275.239] (--) RandR disabled
[ 2275.239] (II) Initializing built-in extension Generic Event Extension
[ 2275.239] (II) Initializing built-in extension SHAPE
[ 2275.239] (II) Initializing built-in extension MIT-SHM
[ 2275.239] (II) Initializing built-in extension XInputExtension
[ 2275.239] (II) Initializing built-in extension XTEST
[ 2275.239] (II) Initializing built-in extension BIG-REQUESTS
[ 2275.239] (II) Initializing built-in extension SYNC
[ 2275.239] (II) Initializing built-in extension XKEYBOARD
[ 2275.239] (II) Initializing built-in extension XC-MISC
[ 2275.239] (II) Initializing built-in extension SECURITY
[ 2275.239] (II) Initializing built-in extension XINERAMA
[ 2275.239] (II) Initializing built-in extension XFIXES
[ 2275.239] (II) Initializing built-in extension RENDER
[ 2275.239] (II) Initializing built-in extension RANDR
[ 2275.239] (II) Initializing built-in extension COMPOSITE
[ 2275.239] (II) Initializing built-in extension DAMAGE
[ 2275.250] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2275.250] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2275.250] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2275.250] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2275.250] (II) AIGLX: Loaded and initialized i965
[ 2275.250] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2275.251] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 2275.276] (II) intel(0): Setting screen physical size to 361 x 203
[ 2275.319] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 2275.319] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2275.319] (II) LoadModule: "evdev"
[ 2275.319] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2275.320] (II) Module evdev: vendor="X.Org Foundation"
[ 2275.320] compiled for 1.12.3.901, module version = 2.7.3
[ 2275.320] Module class: X.Org XInput Driver
[ 2275.320] ABI class: X.Org XInput driver, version 16.0
[ 2275.320] (II) Using input driver 'evdev' for 'Power Button'
[ 2275.320] (**) Power Button: always reports core events
[ 2275.320] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 2275.320] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2275.320] (--) evdev: Power Button: Found keys
[ 2275.320] (II) evdev: Power Button: Configuring as keyboard
[ 2275.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 2275.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2275.320] (**) Option "xkb_rules" "evdev"
[ 2275.320] (**) Option "xkb_model" "evdev"
[ 2275.320] (**) Option "xkb_layout" "se"
[ 2275.355] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event3)
[ 2275.356] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
[ 2275.356] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3'
[ 2275.356] (**) Fujitsu FUJ02E3: always reports core events
[ 2275.356] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event3"
[ 2275.356] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6
[ 2275.356] (--) evdev: Fujitsu FUJ02E3: Found keys
[ 2275.356] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard
[ 2275.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input3/event3"
[ 2275.356] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7)
[ 2275.356] (**) Option "xkb_rules" "evdev"
[ 2275.356] (**) Option "xkb_model" "evdev"
[ 2275.356] (**) Option "xkb_layout" "se"
[ 2275.357] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 2275.357] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2275.357] (II) Using input driver 'evdev' for 'Video Bus'
[ 2275.357] (**) Video Bus: always reports core events
[ 2275.357] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 2275.357] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2275.357] (--) evdev: Video Bus: Found keys
[ 2275.357] (II) evdev: Video Bus: Configuring as keyboard
[ 2275.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[ 2275.357] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 2275.358] (**) Option "xkb_rules" "evdev"
[ 2275.358] (**) Option "xkb_model" "evdev"
[ 2275.358] (**) Option "xkb_layout" "se"
[ 2275.359] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event2)
[ 2275.359] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall"
[ 2275.359] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1'
[ 2275.359] (**) Fujitsu FUJ02B1: always reports core events
[ 2275.359] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event2"
[ 2275.359] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6
[ 2275.359] (--) evdev: Fujitsu FUJ02B1: Found keys
[ 2275.359] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard
[ 2275.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input2/event2"
[ 2275.359] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 9)
[ 2275.359] (**) Option "xkb_rules" "evdev"
[ 2275.359] (**) Option "xkb_model" "evdev"
[ 2275.359] (**) Option "xkb_layout" "se"
[ 2275.360] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 2275.360] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2275.360] (II) Using input driver 'evdev' for 'Power Button'
[ 2275.360] (**) Power Button: always reports core events
[ 2275.360] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 2275.360] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2275.360] (--) evdev: Power Button: Found keys
[ 2275.360] (II) evdev: Power Button: Configuring as keyboard
[ 2275.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[ 2275.361] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[ 2275.361] (**) Option "xkb_rules" "evdev"
[ 2275.361] (**) Option "xkb_model" "evdev"
[ 2275.361] (**) Option "xkb_layout" "se"
[ 2275.362] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 2275.362] (II) No input driver specified, ignoring this device.
[ 2275.362] (II) This device may have been added with another device file.
[ 2275.362] (II) config/udev: Adding input device FJ Camera (/dev/input/event7)
[ 2275.362] (**) FJ Camera: Applying InputClass "evdev keyboard catchall"
[ 2275.362] (II) Using input driver 'evdev' for 'FJ Camera'
[ 2275.362] (**) FJ Camera: always reports core events
[ 2275.362] (**) evdev: FJ Camera: Device: "/dev/input/event7"
[ 2275.363] (--) evdev: FJ Camera: Vendor 0x10f1 Product 0x1a44
[ 2275.363] (--) evdev: FJ Camera: Found keys
[ 2275.363] (II) evdev: FJ Camera: Configuring as keyboard
[ 2275.363] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input7/event7"
[ 2275.363] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD, id 11)
[ 2275.363] (**) Option "xkb_rules" "evdev"
[ 2275.363] (**) Option "xkb_model" "evdev"
[ 2275.363] (**) Option "xkb_layout" "se"
[ 2275.364] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 2275.364] (II) No input driver specified, ignoring this device.
[ 2275.364] (II) This device may have been added with another device file.
[ 2275.364] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 2275.364] (II) No input driver specified, ignoring this device.
[ 2275.364] (II) This device may have been added with another device file.
[ 2275.365] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 2275.365] (II) No input driver specified, ignoring this device.
[ 2275.365] (II) This device may have been added with another device file.
[ 2275.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2275.365] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2275.365] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2275.366] (**) AT Translated Set 2 keyboard: always reports core events
[ 2275.366] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2275.366] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2275.366] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2275.366] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 2275.366] (**) Option "xkb_rules" "evdev"
[ 2275.366] (**) Option "xkb_model" "evdev"
[ 2275.366] (**) Option "xkb_layout" "se"
[ 2275.366] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 2275.366] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad Catchall"
[ 2275.366] (II) LoadModule: "synaptics"
[ 2275.366] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2275.367] (II) Module synaptics: vendor="X.Org Foundation"
[ 2275.367] compiled for 1.12.2, module version = 1.6.2
[ 2275.367] Module class: X.Org XInput Driver
[ 2275.367] ABI class: X.Org XInput driver, version 16.0
[ 2275.367] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2275.367] (**) Option "Device" "/dev/input/event8"
[ 2275.367] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2275.367] (**) Option "TapButton1" "1"
[ 2275.367] (**) Option "TapButton2" "2"
[ 2275.367] (**) Option "TapButton3" "3"
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2275.367] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 2275.368] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2275.368] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2275.368] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2275.368] (II) No input driver specified, ignoring this device.
[ 2275.368] (II) This device may have been added with another device file.
[ 2275.368] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 2275.368] (II) No input driver specified, ignoring this device.
[ 2275.368] (II) This device may have been added with another device file.
xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Fujitsu FUJ02E3 id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Fujitsu FUJ02B1 id=9 [slave keyboard (3)]
↳ Power Button id=10 [slave keyboard (3)]
↳ FJ Camera id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
running
dmesg | grep -i synaptics
doesn't show anything. However running
dmesg | grep -i psmouse
returns a lot of
psmouse serio1: bad data from KBC - timeout
Last edited by flako (2012-11-08 09:44:59)

I have tried doing that with both linux mint, and now fedora live usb. Neither one loads the touchpad correctly. So yeah, our problems weren't really related
Anyway, I tried looking into the
psmouse serio1: bad data from KBC - timeout
messages, and tried running psmouse proto (defined in /etc/modprobe.conf/psmouse.conf) as both raw and imps as per https://answers.launchpad.net/ubuntu/+s … ion/206950 Unfortunately, that didn't solve anything. Using the raw setting meant that the touchpad wasn't loaded at all (as in not appearing in the Xorg.log at all).
The laptop is quite new, but at the same time what i figured from the touchpad vendor & product ID, the touchpad itself isn't. So it should technically work. Before installing arch i booted into windows to see if everything worked, and found no issues with the touchpad. So I have ruled out any hardware errors. Maybe its just the Fn-key that doesn't work yet in Linux? But that doesn't explain the "psmouse serio1: bad data from KBC - timeout" Any pointers to where I should look/ what commands I should run to delve deeper into this issue?
Last edited by flako (2012-09-09 12:10:51)

Synaptics Touchpad not working properly

Hi everyone,
I hope someone can help me with this problem. I have my laptop since more than 2 years and never had a problem with the touchpad. Since yesterday it's all messed up.
Touchpad is enabled and if set on right-handed and buttons and tapping enabled (the standard setting) it reacts as follows: I can continue to move the pointer, scroll and use the right button. I am not able to do tapping anymore and the left button doesn't react.
If I set it on left-handed, tapping starts working again and the right button (now having the function of the left button) works. Still, the left button doesn't react. If I disable the buttons the touchpad itself works properly (scroll, tapping etc).
I have googled and I have tried the following solutions: deinstalling / installing a new Synaptic / Windows driver (downgrading as well), than there was a suggestion to take out your battery and disconnect the power cable - did that as well, have tried enabling/disabling the touchpad - no change after that. I never have a mouse connected but I have now, tried disconnecting, made no difference. The day the error occured I had a Firefox upgrade - downgraded it again, no change. I used pressured air to clean the touchpad + buttons... no change...
I don't think this is a hardware problem because the tapping function, although always enabled, would only work with buttons disabled or with left-hand setting.
I really hope someone has a solution for this, it's driving me crazy!
My laptop is a HP Pavillion DV7 with Windows Vista 32-bit.
Many thanks in advance!
Cheers,
Steph

Is there no one who could help?

After updating my iPhone 5s camera is not working normally

After I updated my iPhone 5s to IOS 8, I experienced some bizarre camera quality. When I am trying to take a picture the image looks very polarized and almost like its a cartoon drawing. When I set HDR on the picture comes out more normal but my camera quality has been completely altered after updating. Here is a screen shot of what it looks like when trying to take a picture.

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

After update to iCloud 2.0, iCloud not working in outlook.

After tonight's update to iCloud on my PC, the iCloud control panel tells me to "Repair the iCloud control panel to use with Outlook." I've gone through the repair process 10 times, and it still doesn't work. Clicking on Calendar or Contacts in Outlook results in an error that the file can't be read. The "Refresh iCloud" button in Outlook 2007 is gone.
I tried deleting the apparently bad data files in Outlook. That made all iCloud-related calendars and contacts disappear. I then tried the repair, but nothing changed. I uninstalled and reinstalled iCloud 2.0. That didn't help - same error message. Refresh iCloud button is still missing in Outlook. I ran Microsoft Office Diagnostics, and it found nothing wrong with Outlook. Note that the iCloud data files were not reinstalled when I reinstalled iCloud. I deleted and reinstalled iCloud again. Same result. I restarted the computer a couple of times throughout these reinstalls and repairs, but still nothing has changed.
Any ideas?
Oh - forget to say that on my other PC laptop, the update worked fine and iCloud is working. Only difference between the two computers is that this one that's having problems is 64-bit Vista Professional, and the one that is working is 32-bit Vista Home. Same version of Outlook 2007 on both computers.

Can you please tell me where you found a previous version of iCloud to download? I can not find a download that doesn't want to download a zillion other programs too
I also wanted to confirm with you that I have to first delete the new version of iCloud before I install the older version, correct?
Lastly, is there anything else I have to do other than delete the old and install the new? I'm not at all tech savy but desperate to have my phone and pc calendars sync again so I'm willing to try.....
Thanks in advance for your help (it likely means I won't forget when my son's football practices ends again!).

My iPhone 4S after Update to IOS 6 Wi-Fi Not Working

My iPhone 4S after Update to IOS 6 Wi-Fi is Off ( Not Working ) But When i Downgrade to 5.1.1 Wi-Fi is Working. I Could not figure out what is the issue. Does any one Facing the same problem. or Have Solution.????

The iPhone is not JailBroken. what I did is, on Thursday i:e 20th Sept. opened itunes and Restored (Restore + Alt ) By selecting the 5.1.1 firmware file from Itunes LIbrary.

Help with After Effects? Null Layer and Text not working?

In after effects cs5.5 on mac, im motion tracking as normal, and the track works fine, then when i add the null layer and edit the tracking target to the null layer, the screen goes black, and all i can see is the null layer as a red box moving along the motion track path (i cant see the path) also, whenever i try to add text, (which im trying to motion track via attatching to the null layer) the text is invisible, when the screens black, all i can see is the wire frame of the text next to the square null layer, im pretty new to after effects, but im following tutorials as i should, and its just not working as it shows in all the videos ive tried, please help!

Check whether you have wireframe mode enabled/ Live Update disabled. Sounds like one of those cases. Other than that this could be OpenGL issues, so turn it off in the prefs. Also check your comp size vs. the size of the footage you are tracking. Tracking works relative to the layer, so if the comp is too small, the values would be so large they end up being outside the comp.
Mylenium

Manual update for plug ins and extensions not working

I've just noticed that when I attempt to manually check for updates either in plug ins and/or extensions from the gear symbol drop down screen that I get the drop down screen, but, the check for updates function does not work. It just sits there with nothing happening. I have to close the screen to get out of that function. Anybody know anything about this?

Thanks you for your comments. I would mention that this problem just started with the update to FF 37.0.4 I tried restarting FF in safe mode with no effect on the above mentioned problem. Any other thoughts?

Xserve Not Mounting Firewire Drive and Keyboard Not Working On KVM Switch

A couple of days ago I was swapping out my monthly firewire(800) backup to put the daily one back in place and my daily firewire backup drive will not mount. I've tried swapping out the cables, tried USB and Firewire400 with no avail. I tested the drive on my G5 and whapaa it mounted right away and the data is readable. For some reason my Xserve ignores it. I checked that the lock is in the unlock position so that's not the issue. I ran an xrdiags test last night and it came out fine. I also applied all of the latest updates. HELP!!!
Not sure if this is related, but my Xserve has begun to ignore my KVM switch so I have not direct keyboard/mouse connection. What could be the problem?
The backup drives are Western Digital My Books.

Problem fixed. Follow the instructions on this KB article:
http://docs.info.apple.com/article.html?artnum=88338
So if you ever have these symptoms, follow the instrucions above, it works like a charm.
Thanks for your input DP.

Hard drive and usb not working

Greetings,
My notebook is cq60-214dx compaq presario with a windows vista basic operating system. I have pentium dual core inside.
Recently, My usb stop working, there is nothing else hooked up to it for the past year. It is not detecting my flash drive. I did the shut down and unplug thing. I also did the F10 bios test and the hard drive test failed at 61%. I went into the usb root hub and it shows each one is fine and is at 0 mA. The only thing that I see is the microsoft Isatap adapter code 31. A toredo tunneling pseudo interface -code 10 with a caution sign. I 've tried the hp down load and all kind of suggestions that is not working. Is there something I can try to fix the hard drive. I'd like to eventually go to windows 8 operatiing system but I am not fearful.

Hi newbie-515,
Unfortunately, the failure code for the hard drive is fortelling you of what is to come. In my opinion I would address the solution by the following specific actions:
1: Back up any data that can be accessed from the original drive, onto an external hard drive. To minimize the risk of losing any information.
2: Replace the failing hard drive, before it gets to the point of complete failure. This may also prevent loss of personal data.
and 3: Decide whether you want to upgrade/restore Microsoft Windows 7 onto the pc. That particular pc has current drivers available online at HP Support for the Microsoft Windows 7 operating system.
Once this has been completed, then you can recover any personal data that was backed up to the external hard drive, onto the newly installed hard drive.
***In this forum support is available for HP hardware/software assistance. I will provide best-effort support with your HP hardware/software. If you need assistance with software that is from any other vendor, then I may re-direct you to the appropriate reference at that time.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem. Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

Optical drive and HD not working together in 1.67GHZ 15" G4

I have G4 Al 1.67GHz Powerbook that I am unable to make the Optical drive be recognized when the internal HD is connected. If I put the HD in an ext Firewire enclosure and boot from that, the optical drive works fine. I have tried two Motherboards, different flex cables on both drives, different HD and Optical but no change. I did have to load the HD in a 1Ghz 12inch G4 PB since I do not have a newer OS version than 10.4 and I have seen that the 1.67GHz requires 10.4.2. However, I loaded the drive and upgraded it to 10.4.10 before installing it in the 1.67Ghz. It seems to act like a IDE master/slave conflict. I also found an older optical drive that allows you to set the drive as a Master, slave or for cable select. When I set it to slave, it work just fine. the problem is I would like to use the PB with the original UJ-846 Superdrive it came with.
Is it possible that this is a problem with the software load?
Any help would be much appreciated.
Doug

Hello.
I have a similar problem on my al powerbook G4 as well. I have a UJ 845e superdrive. It was working just fine, but since I installed Leopard (10.5.1) it stoped working. if i insert a cd or a dvd, it will spin it for a while before rejecting it.
Can you help me with that ???

After update to version 12, iTune will not work on some of my idevices. Please help!!

I have total of 7 iDevices (iPhone + iPad), after I update iTune to the latest version which is v12 then only 2 of my iPad 4 can performed the update the rest were not recognize by iTune.

list your iDevices by:
the ones that Don't work
the ones that Do work
be sure and give corresponding iOS versions
ÇÇÇ

After updating to Mavericks, my reminders are not working?

I have update my system OS to Mavericks and my old reminders are stopped working, why this happened?
how to resolve it? why my reminders stopped?

Back up all data.
In the iCloud preference pane, uncheck the box marked Calendars & Reminders if it's checked. You may get an alert that one or more calendars will be deleted from your computer. Confirm. The calendars won't be deleted from iCloud. Leave the preference pane open.
Quit Reminders if it's running, and also quit Calendar or iCal.
Triple-click the line below on this page to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
If you unchecked the box in the iCloud preference pane, check it again and close the preference pane.
Launch Reminders and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Screen Flickering Everytime After Updating Synaptics Touchpad Driver And Touchpad Not Working

Similar Messages

Maybe you are looking for