Screen Flickering when using flash Player after suspend

Hey,
I've got a Samsung R40+ a pretty old Laptop everytime I set him to suspend and wake him afterwards the Screen flickers as soon as I use Flash player. I'ts mainly black and white stripes flashing across the screen especially bad when I watch Videos in Fulscreen. This happens with the Flashplugin aswell as with the Pepper-Flash in Chrome.
This has been an Issue Forever even back when I used Ubuntu I just Ignored it and never Let My Laptop suspend but if there is a solution I would love That.
Greeting Schtiehve

Similar Messages

The settings box is always in the middle of my screen when using Flash Player , Won't close?

The settings box is always in the middle of my screen when using Flash Player , Won't close ?

See:How do I do a clean install of Flash Player?
It should work ok after that.

I encountered a problem when using Flash Player V9.0.115, can somebody help me?

Hello all, can somebody help me?
I have encountered a problem when using Flash Player
V9.0.115. Your help would be greatly appreciated.
The problem described as follows:
1. The flash file with sound works well before uploaded to
website. The audio lost when uploaded to the website(There is no
problem with the flash file size). I have uploaded the flash file
to website for you to test. Please go to
http://www.sameshow.com/democreator/create
a new site.swf and kindly check with it.
2. When we open the flash movie in IE with Flash player
V9.0.47 and previous versions (Flash9d.ocx), the flash movie with
sound works well.
3. When we upgrade the flash player to the latest version
V9.0.115 (Flash9e.ocx), the video works well, but the sound just
can play several seconds and then stop.
4. On Flash Player ocx V9.0.115. If we publish the flash
movie on web with 24fps, the sound just can work several seconds
and then stop, the problem is the same if we use the
TShockWaveFlash control to play the flash movie.
5. On Flash Player ocx V9.0.115. If we publish the flash
movie with 12fps, the sound works well but the quality is really
very poor. It seems that the sound plays shorter with more frames
per second. But the flash file works well with the Flash Player
V9.0.47 and previous versions (Flash9d.ocx).
Can somebody help me to figure it out? Thanks in advance!
Regards,
Sabrina
[email protected]

Hello Darren, I really appreciate your response. My mail is
[email protected] I have uploaded the flash file to our
ftp,
http://www.sameshow.com/democreator/create
a new site.swf. And also I compressed the original file to a
zip file and uploaded to our ftp at
http://download.sameshow.com/aff/create.zip,
please kindly check! When we playing this flash file on FlashPlayer
V9.0.47 and previous, the audio works well. But the audio just can
play several seconds and then stop when I playing it on FlashPlayer
V9.0.115. The garbled audio makes us very upset. Your help would be
great appreciated!
Sabrina Fu

When using flash player for games, the mac runs real slow

When using flash player for games, the mac runs real slow. It's also not the fastest at anything. Can I do anything to speed stuff up ?????

Have no clue. You provided no details and your system profile is blank.
Which os are you using?
How are you connected to the internet?
Have you contacted your isp to make sure the slowness is not coming from their end?
Max out your ram.
How large is your hard drive and how much hard drive space do you have left?
You you using the latest version of Adobe Flash?
Please describe in detail all you have attempted to do in order to resolve the issue.

Why can't I find nor use flash player after a successful install

Just purchased an Imac Pro with OSX 10.8.5 and after various attempts to install/use Flash Player I'm still confused as to why the installer says all is well with the installation "installation succesfully completed" with no errors whatsoever, the troubleshooting site and, for that matter all applications, say "please install the latest Flash Player"

Spotlight search “Flash Player.plugin” (Search “This Mac” and choose "Show All in Finder")
Right click the Plugin and select “Open Enclosing Folder” Trash the Flash Player.plugin and flashplayer.xpt files.
Go to: [user]/Library/Preferences.
Note: You'll need to hold the "Option" key when you click "Go" from the Finder menu to access the [user] Library:
Without the "Option" key
And WITH
Trash the Macromedia folder there.
Go to: Mac HD/Library/Application Support. Trash the Macromedia folder there.
Go to: Mac HD/Library/Preference Panes (not Preferences, but Preference Panes). Trash the Flash Player.prefpane file there.
Empty the trash.
Download the Flash Player (For Mac OS X) again if necessary.
Quit Safari and go to your downloads folder. Double click the DMG to “mount it”.
It will appear on your desktop and a small window will open.
Double click the installer. If you see a warning, click “Open” to let it run.
Click “I have read and agree… etc.” and click “Install”. Enter your password when asked.
You may see the following: click “Force Close All” if you do, and then click “Retry”.
The installer will run.
Choose your update preference, and click “Done”.
Open Safari again and click Safari>Preferences (Cmd+,)
Go to the Security tab. Make sure “Allow plug-ins” is checked.

I cannot get rid of the permissions box when using flash player in firefox

Hi
I have explored on the web about this problem. When attempting to use flash player in firefox, I cannot click on the allow button to allow my video camera and microphone to be used on sites. I CAN go to Global settings and allow the sites by putting their URL, but this makes no difference, the little permissions box keeps appearing and won't go away.
Anyone know what else to try if changing global setting permissions doesn't work?
Barry

This sounds like a bug. The direction that we're heading is to have the browsers present these permission dialogs, and to eliminate them from Flash completely. It is unlikely these native dialogs will support an "always allow" or "remember" option.
If you're not able to click the button in the dialog when it's displayed, that's problematic. We have a couple things in the pipeline to make the dialog bigger. Usually those problems are resolution specific, although if there's moving video behind the dialog, that can trip our security controls. We do a bunch of checks to ensure that the dialog you're clicking isn't obscured by something else, so that we're sure you know that you're clicking and approve button.
There is an improvement in the pipeline to make these dialogs bigger. They were originally designed for 640x480 screens (they've been around *that* long), and they're way too small on modern high-density displays.
Anyway, you're welcome to file a bug at http://bugbase.adobe.com/. Please be sure to include a link to the problem content, and the configuration you're using (OS and browser version, and screen resolution would be particularly useful -- these are often resolution-dependent issues).

High cpu usage when using flash player

Hi,
Just updated to Mavericks and now I'm having very high cpu usage while watching streams using flash player. CPU usage is somewhere around 110% and after a moment the stream starts to lag and fps is slowing down. I also tried using Chrome but with no difference. Flash player is the newest version 11.9.900.117.
Any ideas on how to fix this?

i think its the best to hit the report a problem button in safari, since its appears since i updated safari to 5.1.4! maybe they make a additional update

Videos won't play until fully loaded when using Flash Player

Hello,
When I try to play videos using flash player, it usually takes a very long time for them to start playing, because they do not start until the entire video is loaded. However, disabling flash player and using something like Quicktime allows me to start watching a video once enough of it has buffered.
I'm currently using Windows 7 x64, and it happens across browses (Firefox, Chrome, IE). I've tried uninstalling/reinstalling the latest version of Flash player several times, but no luck. Any help would be appreciated, thanks!

How video is played is determined from the content/server, not flash player itself. Are you seeing this happen with YouTube?

Can't move to second screen of survey (uses Flash Player 9)

Hi,
I was trying to fill out a survey on www.949thesound.com (The
Sound Choice Awards), and when I clicked on the link to access the
survey, I was able to place a checkmark in one of the choices on
the first page of the survey. It seems like the survey should have
automatically moved to the next screen after that, but it didn't. I
right-clicked on the screen and saw that the survey was using Adobe
Flash Player 9 (which I have installed on my computer). Will you
please let me know what I can do to resolve this issue and have the
survey jump to the next screen automatically like it should?
Thank you so much!
Catherine

Thank you Malcolm for the response. An excellent idea which I hadn't tried.
I actually had zapped the PRAM several times (and even reset PMU) but did not think to do it with the DVI->VGA adaptor removed, so I just tried this. Unfortunately this didn't solve it. After removing the DVI-> VGA adaptor from port 2 and zapping PRAM (twice), I now am getting an "unsupported input" message on the monitor connected to Port 1 with the DVI->VGA adaptor still removed from port 2. So if anything this state is worse.
This is very strange--because when I put the DVI adaptor back on port 2, the situation returns to where it was before as described. After a hardware reboot I have the aqua screen with missing login window again. It seems zapping the PRAM did not do it here. It also seems this DVI->VGA adaptor is definitely having an effect on the situation. Why would connecting a DVI-VGA adaptor on port two cause port one to regain function and why would removing it cause port 2 to go dead essentially?
At any rate, I am still unable to use the computer...

Screen flickers when using magnetic lasso

Hello,
First I want to say that my english is kinda crappy so, sorry for that.
My problem is, when i'm drawing a line with the magnetic lasso tool, after a few seconds the screen flickers one time and my line is a selection.
Same with the color picker, when I hold my left mouse button to choose a color it flickers and is "Not responding".
I'm using CS4 and Windows 7
I hope someone can help me
Thank you

There were several issues with mostly the MS InteliPoint drivers, but also some of the Logitec SetPoint drivers, causing just such behavior in Adobe programs' GUI. In those cases, just removing either the InteliPoint, or SetPoint drivers, as has been mentioned, cleared things up. Going back about two years, I'd guess that three releases of the InteliPoint drivers did this horribly. It seemed to have been fixed with later releases, but recently showed back up in both the PrPro and AfterEffects fora.
Good luck,
Hunt
PS - was going to make a joke that it was the "magnet" in the Magnetic Lasso, messing with the monitor, but thought better of it. Would not have been funny anyway...

Stage3d will always fall back to software mode when using flash player 11.6 content debugger

I just update my flash player and air sdk to 3.6. My game is being developing using starling. And after update was complete, weired things happened. First,it would always fall back to software mode when debugging with content debugger. I just couldn't get to the gpu mode with content debugger! Second, when I run my game with IE 10 with flash player 11.6, some transparent black skins becomes transparent white skins!!!! That drives me crazy! Surely there are lots of bugs with the release of flash player 11.6 for windows 8!

I just update my flash player and air sdk to 3.6. My game is being developing using starling. And after update was complete, weired things happened. First,it would always fall back to software mode when debugging with content debugger. I just couldn't get to the gpu mode with content debugger! Second, when I run my game with IE 10 with flash player 11.6, some transparent black skins becomes transparent white skins!!!! That drives me crazy! Surely there are lots of bugs with the release of flash player 11.6 for windows 8!

Computer goes power-off when using flash player

Hi,
When using Linux (both Fedora 20 and openSuse 13.1), the latest updates installed, with latest flash player, recently my computer either starts rebooting continuously or just goes power-off. This happens between 15 seconds to 1 minute into a video. Earlier I thought it was the computer hardware being at fault, but after thoroughly cleaning it, it still happens and without playing a flash video, the computer just keeps running. List of my hardware (from dmesg): AMD Sempron(tm) Processor 3100+, ATI RV620 LE [Radeon HD 3450] video, 2 GB RAM.
Thanks for any suggestion or solution...
H.

It's either graphics drivers or a heat problem (but that would be more the turn-off, but not the rebooting symptom).
You can disable hardware acceleration in Flash to try and avoid it.
Video playback issues

Photoshop CS6 - Screen flickering when using brushes with new MacAir 2013

Would the Adobe team please respond to the issues reported by several users:
http://forums.adobe.com/message/5449199
A number of users experience severe screen flicker in Photoshop CS6 when using any of the larger brush type tools (cloning, eraser, brush, spot healing, burning, and dodging). As many on this thread are experiencing, it is awfull and unusable! The flicker is screen wide black boxes, sometimes the whole screen goes black. It only seems to happen when we put the cursor over the image to edit.
Hardware: MacBook Air 13", Haswell 1.7 GHz, 8GB, 512 SSD Software:
Photoshop CS6 v13.1.2 20130105.r.224, OS X v10.8.4 (and perhaps others)
Looks like a CS6 is not compatible with teh new MacAir. Please look into this and advise.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64 Operating System: Mac OS 10.8.4 System architecture: Intel CPU Family:6, Model:69, Stepping:1 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Message was edited by: GSVAI

An update:
I went to the Apple store and brought myself a more recent MacBook Air (13", 4/256 FYI, they were out of the 8/512 model). I can't reproduce *exactly* what you're showing, but got the flicker to happen by resizing the cursor. Also, while painting, the screen seems to stop updating except for the cursor -- not only is Photoshop unable to draw, but other applications stop drawing as well. And a few times it hasn't even updated the cursor (while all other apps seem frozen). That's not normal.
When I see the flickering, I frequently see the menubar and other UI elements draw at the wrong location on the LCD, then black, then redraw in the correct location -- repeat in different positions and lots of "static" until I stop changing the cursor. That's more evidence of a hardware or and odd driver issue. The odd thing is: it doesn't happen all the time. It's possible that the one we have at the office also shows the problem, but we didn't test long enough.
I'm trying to reach out to my hardware contacts at Apple - but it's a weekend before a holiday, so we may not make progress immediately.
One thing that would be useful here: the model of MacBook Air that you have that shows (or doesn't show) the problem.

Cannot use Flash player after 10.2, have to keep reverting back to that version or earlier.

I am frustrated. I cannot use any flash versions later than Adobe® Flash® Player Installer/Uninstaller 10.2 r159 . If I update to version 11 or later I cannot watch any flash videos. The audio will play but the video freezes and pauses.
I have been trying to find a solution to this issue, versions 10.2 and earlier work fine but ever since the new flash was released and I have tried to update, I run into the same problem and have to revert back to 10.2 or earlier.
I thought maybe it might have been the video card but I had it replaced and same issue and I have two other notebooks with the same exact hardware but different OS and they are able to use Adobe 11 just fine.
The issue is also present when using Linux (Ubuntu).
My configuration.
Operating system:
Microsoft Windows XP Professional
and
Ubuntu
Processor:
Intel T9300 2.5Ghz
Video card:
Nvidia GeForce 8700M GT
Memory:
4GB
I would like if someone could help me with this issue. I am frustrated becasue sites are 'requiring / mandating' that I update to Adobe 11 but if I do so I cannot use part of the site, for example Facebook or Youtube.
Thanks in advance for any feedback....

That seems to have solved the problem.
Question though, why does turning the hardware acceleration off make the videos play better in high definition? I'm kinda baffled.
My video card driver is nv4_disp.dll , version 6.14.0012.6658, date 1/7/2011
I have tried many different Nvidia drivers trying to solve that issue and even had the video card replaced thinking it was the cause, but had the same problem with a new video card so thought I would try here.
Seems to work for me though now with the lastest version of flash but still I am confused why this is so.
Thank you for your help.

Screen flickering when using camera

Has anyone had any problems while using the camera on the iPhone 5C where the screen flickers and a pink band appears across the bottom half off the screen. The camera then becomes frozen and you have to end the task to be able to take any further photos.

Hey ANNE MARIE PRINTY,
Thanks for the question. After reviewing your post, it sounds like you are having trouble with the camera. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone: Hardware troubleshooting
Camera isn't functioning or has undesired image quality
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Screen Flickering when using flash Player after suspend

Similar Messages

Maybe you are looking for