Screen flickers at user selection screen after restart/start up (not sleep mode)
when i restart my mac, the screen where you key in your password, the LCD screen on the mac flickers for about 2 seconds. i just recently replaced the hard drive. but it doesn't hang or lag. it just flickers. just wondering if theres an issue with it. and is it usual for the mac's body to get really hot when playing video games? Thanks a bunch
Hello hafizzachary,
Thanks for using Apple Support Communities.
The following support article is a great resource to troubleshoot issues with your internal display.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Take care,
Alex H.
Similar Messages
-
How to adjust mouse or trackpad parameters for the user selection screen?
This is not critical, but annoying. I can change the mouse or trackpad parameters by user, so anyone can use their own mouse or trackpad adjustment. However I can not locate how to change this parameters for the welcome or user selection screen. In my case I have two users, both of us use the trackpad with the one touch for click function, so no one press physically the trackpad for a click. However, as the default parameter is the touch function deactivated we have to actually click the trackpad in that exclusive screen.
Another example with mouse, normally we use the mouse with almost double of the default acceleration, but when in the user selection screen the mouse assumes default configuration and feels super SLOWWWWWWW.
Again, this is not critical, but would be very nice to be able to modify this parameters in the welcome screen.
Tyrone CarrionFor the login screen, you are not associated with a normal user, but the system defaults...try logging in to the Admn account and change the behavior there...those settings should then apply to the login screen.
-
Why my mac boots showing user selection screen?
My mac freezed on the user selection screen las time I started it so I reseted it by holding the power on button on the back of the imac.
Now when I boot it it just shows the user selection screen and freezes there. Mouse and keyboard don't respond. If I reset it or jnplug it I still have the same thing ocurrimg.
What can I do to solve it?Try using a USB keyboard and mouse and see if they work. I'm assuming that you have the bluetooth wireless setup? If a wired keyboard and mouse work then you either should replace the batteries in both or have your Mac taken in because something is going on with the bluetooth
-
How to do screen enhancement in the selection screen of CS15 transaction
Hi friends,
I have a unique requirement where I have to do screen enhancement in the selection screen of CS15 transaction to get the top level material,
Can you please tell how this could be achieved ?
Looking forward your valuable inputs.
Thank You.
Regards,
S SadhyaHi,
This can be achieved by using user-exit. Specifically screen-exit. Check these two exits related to transaction CS15. They may be helpful to you.
<b>
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
</b>
Let me know if you need any other information.
Regards,
RS -
Recently having problem with flickering on monitor (viewsonic vg2436wm). When coming out of sleep mode. It will flicker, the screen goes gray, sometime out. Have to press power button to get screen on. Problem stops. Getting more frequent. After sometime problem stops. My system is a Mac Mini 2010, 2.4 intel core 2 duo, 2 GB, running OSX10.8.5
See if it's related to this...
The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip -
Calling a screen at pushbutton in selection screen
hii all,
please provide me the suitable code for calling a screen on pushbutton in selection screen....
thanks
babbalTABLES: SSCRFIELDS.
TYPE-POOLS ICON.
DATA: FUNCTXT TYPE SMP_DYNTXT.
PARAMETERS: P_VBELN LIKE VBAK-VBELN.
SELECTION-SCREEN: FUNCTION KEY 1.
INITIALIZATION.
FUNCTXT-ICON_ID = ICON_NEXT_OBJECT.
FUNCTXT-ICON_TEXT = 'PUSHBUTTON'.
SSCRFIELDS-FUNCTXT_01 = FUNCTXT.
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
WHEN 'FC01'.
CALL SCREEN 100.
ENDCASE.
regards,
prakash reddy .s -
GT70 BSOD or Stuck after Windows puts it to sleep mode of turns off monitor
Hi Everyone!
i have an issue (or 2) with my laptop.
both happens when:
1) whenever i put the laptop into sleep mode or either windows does so automatically (inactive period), - the laptop will go to sleep just fine.
2) windows turns off monitor after a period of inactivity. (sleep mode due to inactivity was disabled in this case)
in both the cases i mentions above, if i wake the computer within lets say 5 minutes, it'll turn on just fine.
but after a certain period of time passes it wont.
with the sleep mode, the computer will wake and will then produce a BSOD STOP error 0x4 and restart.
with monitor turned off it'll simply wont turn on, not responding to neither keyboard, mouse or power button. - i have to do a hard reboot
any ideas?
anything i can check?
note the laptop just came back from a warranty repair, so all parts have been tested and been found ok!
system specs:
MSI GT70-0ND
CPU: Intel Core i7-3630QM 2.4GHz (Intel GPU HD 4000 included)
Memory: 16GB DDR3
Storage: 750GB HDD 7200rpm
128GB SSD (Patriot Pyro SE) - OS installed on this.
GPU: 4GB NVIDIA Geforce GTX 675MX
OS: Windows 7 64bit
Thanks in Advance!!i dont think i have the same problem as in the other thread.
my bios:
my laptop doesnt restart when my screen is turned off and i try to wake it. it would simply wont wake up.
and my BSOD happens only after i wake the laptop from sleep mode and only if it been in sleep mode for a while. meaning i if i wake it up within a few mins of going to sleep it'll boot justfine. -
My Macbook Pro 13 refuses to turn on after i place it in sleep mode by closing the lid, after opening the lid the led sleep indicator is still on and the screen hasn't revived but once i press any button to revive it, it goes off and refuses to turn on. Is there a way to fix this?
Hello Carlens J,
Thanks for visiting Apple Support Communities.
It sounds like your MacBook Pro does not wake from sleep, and shuts down when you try to wake it.
Try these troubleshooting steps to remedy the situation, or if your Mac is currently not powering on:
OS X: When your Mac doesn't sleep or wake - Apple Support
Reset SMC
The System Management Controller (SMC) is involved in managing power on your computer. Reset the SMC on your Mac if you are having difficulty sleeping or waking your computer.
Reset NVRAM/PRAM
Nonvolatile RAM (NVRAM)/Parameter RAM (PRAM) stores some power-related settings.Try resetting NVRAM/PRAM if you are having difficulty sleeping or waking your computer.
Test with external devices disconnected
Some external devices can prevent your computer from sleeping. Try disconnecting items other than your Apple keyboard or mouse from the built-in USB, Thunderbolt and Firewire ports on your Mac. If this resolves the issue, try reconnecting your external devices one at a time until you find the device preventing sleep or wake. Check the documentation that came with the device, or contact the device manufacturer for more information.
Try Safe Mode
Check to see if the issue still occurs when the computer is started in Safe Mode. If this resolves the issue, it could be related to a third party software item such as:
a login item
a startup item
a third party kernel extension
Best Regards,
Jeremy -
Xperia Z2 screen flickers white color white screen is on after receiving notification
I would like to bring to your notice that i bought new xperia z2 on 14 june 2015, the next day onwards i faced display problem ( screen flickers), i recorded that as evidence and submitted for DOA request after many follow ups i got approval. Yesterday i bought new device xperia z2 from same vendor, as a return of defective piece. I observe same problem with this device also. I lost trust on Sony brand. I am not having time and patience to follow with you within 7 days showing problem as it occurs sometimes, hence i am dropping mail.request you to address the problem. I am not if it is a software bug or hardware issue. After upgrading software from service center problem persists.
@AnirudhV
Keep us updated and let us know what they tell you when you get your phone back.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Webi Report User selection screen
I need to create a selection screen with check box and radio button like custom selection screen. Whenever the report run, user must fill the information in selection screen and then report should show. How can i get custom selection screen?
Hi,
Create a "'Input Control" for user custom selection. Below is the link on further steps
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/9057beb9-2844-2e10-ff8f-c78ca3f87f7c&overridelayout=true
Thanks,
Jothi -
Filtering criteria in User selection screen
Hi experts,
Is there any ways to display values in the selection screen based on the above criteria that user selected? For example, the selection screen has 3 selection tabs. The first tab is to choose region (A,B or C). When user selects region A, the second criteria shows only the factories that located in region a, not all of the factories. Once user select a factory, the thrid tab shows only the manager names that works in that factory.
I'm new in this area so please provide me an instruction steps by steps.
Thanks so much,
PhantDo you have any mapping maintained in any InfoObject for all these characteristics you mentioned, or you are trying to pull out this information based on the trascational data from the cube.
There is one option in the query designer. Go to Advance tab of the characteristic and under second option "Filter vale for selection during query execution", select Characteristic Relationships.
- Danny -
Apple Script to make Pages open in a user-selected screen position
This is a follow-up to a response/script made previously by Yvan KOENIG that enables Pages to open a Pages template in a user-selected "left" position.
http://discussions.apple.com/message.jspa?messageID=9100331#9100331
This works great for me, but I'd like to take this one step further, if possible. I'm naïve when it comes to Apple Scripts
Currently, if I use the script, it opens up in 100% 'fit-width' view as follows:
http://trials.sent.com/pages/100.png
What I'd like it to do is to open up in 125% 'fit-width' view as follows:
http://trials.sent.com/pages/125.png
I'd like to therefore ask if it's possible to somehow enable this in the script above.I looked at the English version.
Let me say you that you are a funny guy.
Set width and set "Fit Width" are incompatible commands.
On my 1920 x 1200 screen, if I set scale to 125%, Fit Width is disabled.
If I check "Fit width", the size remains unchanged but is no longer selected.
On a smaller display, "Fit Width" will set the page in the "100%" mode.
My guess is that it's what you get.
As I am a good guy,
I add some instructions in the code.
Now you may activate several settings to fit your needs (when they are technically compatibles).
--(SCRIPT openToLeft.app]
Enregistrer le script en tant que Script, Application ou Progiciel : openToLeft.xxx
déplacer l'application créée dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Pages:
Il vous faudra peut-être créer le dossier Pages et peut-être même le dossier Applications.
menu Scripts > Pages > openToLeft
Le script créera un nouveau document à partir du modèle choisi et le poussera à gauche de l'écran.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++
Save the script as a Script, an Application or an Application Bundle: openToLeft.xxx
Move the newly created application into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Pages:
Maybe you would have to create the folder Pages and even the folder Applications by yourself.
menu Scripts > Pages > openToLeft
The script will create a new document from the selected template and will push it to the screen's left edge.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
+++++++
Yvan KOENIG (Vallauris FRANCE)
4 mars 2009
property theApp : "Pages"
property hardCoded : false
true = the template is predefined
false = you select the template when you run the script *)
property zoomIt : false
false = leaves the doc size as created
true = issue a cmd + > command to enlarge it *)
--=====
on run
my activateGUIscripting()
tell application "Pages"
set Templates_loc to localized string "Templates" (* nom local du dossier "Modèles" *)
set MyTemplates_loc to localized string "My Templates" (* nom local du dossier "Mes Modèles" *)
end tell -- theApp
set templatesFolder to ((path to application support from user domain as text) & "iWork:Pages:" & Templates_loc & ":" & MyTemplates_loc & ":")
if hardCoded then (*
Here the template to use is hard coded in the script *)
if templatesFolder does not end with ":" then set templatesFolder to templatesFolder & ":"
set myTemplate to (templatesFolder & "un modèle09.template:") as alias
else (*
Here we are urged to choose the template in a dialog *)
set templatesFolder to templatesFolder as alias
Don't ask me why, Pages uses two Universal Type Identifiers for its templates
the first one is used if only Pages '08 is installed under 10.4 or by both '08 and '09 under 10.5.6
the second one is used under 10.4.11 if Pages '09 is installed *)
set allowed to {"com.apple.iWork.Pages.template", "com.apple.iWork.Pages.sfftemplate"}
if 5 > (system attribute "sys2") then
set isOs4 to true
set permitted to allowed
else
set isOs4 to false
set permitted to {}
end if
if my parleAnglais() then
set myTemplate to choose file "Choose a Pages template …" of type permitted default location templatesFolder
else
set myTemplate to choose file "Choisissez un modèle Pages …" of type permitted default location templatesFolder
end if
if not isOs4 then
due to a system's bug, choose file is unable to filter the iwork's files UTIs
So we must check by ourself *)
set maybe to myTemplate as text
tell application "System Events" to set typid to type identifier of disk item maybe
if typid is not in allowed then
if my parleAnglais() then
error "The file “" & maybe & "” is not a Pages template !"
else
error "Le fichier « " & maybe & " » n’est pas un modèle Pages !"
end if
end if
end if
(* Here, the pathname of the template is of class alias *)
end if -- hardCoded
try
tell application "Pages"
activate
set n to count of documents
open myTemplate (* create a new doc from the template *)
repeat
if (count of documents) > n then
exit repeat
else
delay 0.1
end if
end repeat
tell window 1 (*
As we are telling to application "Pages" we may use tell window 1 even if we have an Inspector or a Find/Replace dialog open.
It would be wrong if we where telling to process "Pages" *)
set {x1, y1, x2, y2} to get bounds
set bounds to {0, 0, x2 - x1, y2 - y1} (* move the window to the left edge *)
set view scale to 125.0
--set fit page to true (* or false *)
set fit width to true (* or false *)
--set full screen to true (* or false *)
--set outline visible to true (* or false *)
--set ruler visible to true (* or false *)
--set styles visible to true (* or false *)
--set thumbnails visible to true (* or false *)
--set toolbar visible to true (* or false *)
--set two up to true (* or false *)
end tell -- window
end tell -- application
end try
end run
--=====
on activateGUIscripting()
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true (* to be sure than GUI scripting will be active *)
end tell
end activateGUIscripting
--=====
on parleAnglais() (* Check if Pages is running in French *)
local z
try
tell application theApp to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Yvan KOENIG (from FRANCE jeudi 14 mai 2009 11:35:36) -
Screen flickering in KDE 4.2 after pacman -Syu
Hi there,
yesterday I did a "pacman -Syu" and since then my screen keeps flickering every now and then when I move my mouse over the screen or when a new dialog pops up. Sometimes it even flickers when the plasma widget RSSNow slides in new articles.
I can't really nail it, but it seems to be worse if there are many plasma widgets and / or windows open.
It seems to be especially bad when one of my two plasma panels is set to "auto hide".
I've tried to play with the advanced Desktop Effect settings like OpenGl mode, texture filter, VSync and such, but nothing improved. Before the system update my NVidia card was happily playing with KWin.
Has anybody had similar experiences over the last couple of days?
I'm using a NVidia Quadro NVS 110M:
01:00.0 VGA compatible controller: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device 01c2
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at ed000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at ee000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at ef000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] MSI: Mask- 64bit+ Count=1/1 Enable-
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
The packages pacman has updated are (taken from /var/log/pacman.log):
[2009-03-01 15:44] starting full system upgrade
[2009-03-01 16:20] upgraded cabextract (1.2-1 -> 1.2-2)
[2009-03-01 16:20] upgraded faac (1.26-1 -> 1.28-1)
[2009-03-01 16:20] upgraded flashplugin (10.0.15.3-1 -> 10.0.22.87-1)
[2009-03-01 16:20] upgraded ghostscript (8.64-2 -> 8.64-3)
[2009-03-01 16:20] upgraded gpm (1.20.5-2 -> 1.20.6-1)
[2009-03-01 16:20] upgraded grep (2.5.3-3 -> 2.5.4-1)
[2009-03-01 16:20] upgraded groff (1.20.1-1 -> 1.20.1-2)
[2009-03-01 16:20] #####################################
[2009-03-01 16:20] themes are moved in an extra package:
[2009-03-01 16:20] community/murrine-themes-collection
[2009-03-01 16:20] upgraded gtk-engine-murrine (0.53.1-1 -> 0.53.1-3)
[2009-03-01 16:20] upgraded imagemagick (6.4.9.2-1 -> 6.4.9.7-1)
[2009-03-01 16:20] upgraded phonon (4.3.0-2 -> 4.3.1-1)
[2009-03-01 16:20] upgraded soprano (2.2.1-1 -> 2.2.2-1)
[2009-03-01 16:20] upgraded kdelibs (4.2.0-4 -> 4.2.1-1)
[2009-03-01 16:20] upgraded kdeaccessibility (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:20] upgraded tdb (3.2.7-1 -> 3.3.1-1)
[2009-03-01 16:20] upgraded smbclient (3.2.7-1 -> 3.3.1-1)
[2009-03-01 16:21] upgraded kdebase-runtime (4.2.0-2 -> 4.2.1-1)
[2009-03-01 16:21] upgraded kdepimlibs (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:21] upgraded kdebindings (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:21] upgraded kdeadmin (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:21] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2009-03-01 16:21] upgraded kdebase-workspace (4.2.0-6 -> 4.2.1-1)
[2009-03-01 16:21] upgraded kdeartwork (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:21] upgraded kdebase (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:21] installed libnova (0.12.3-1)
[2009-03-01 16:21] installed indilib (0.6-1)
[2009-03-01 16:21] upgraded kdeedu (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:21] upgraded kdegames (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:21] upgraded kdegraphics (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:21] upgraded kdemultimedia (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:21] upgraded libvncserver (0.9.1-1 -> 0.9.7-1)
[2009-03-01 16:21] upgraded kdenetwork (4.2.0-3 -> 4.2.1-1)
[2009-03-01 16:22] upgraded kdepim (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:22] upgraded kdeplasma-addons (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:22] upgraded subversion (1.5.5-1 -> 1.5.6-1)
[2009-03-01 16:22] upgraded kdesdk (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:22] upgraded kdetoys (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:22] upgraded kdeutils (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:22] upgraded kdewebdev (4.2.0-1 -> 4.2.1-1)
[2009-03-01 16:22] >>> Updating module dependencies. Please wait ...
[2009-03-01 16:22] >>> MKINITCPIO SETUP
[2009-03-01 16:22] >>> ----------------
[2009-03-01 16:22] >>> If you use LVM2, Encrypted root or software RAID,
[2009-03-01 16:22] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-03-01 16:22] >>> More information about mkinitcpio setup can be found here:
[2009-03-01 16:22] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-03-01 16:22]
[2009-03-01 16:22] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-03-01 16:22] ==> Building image "default"
[2009-03-01 16:22] ==> Running command: /sbin/mkinitcpio -k 2.6.28-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-03-01 16:22] :: Begin dry run
[2009-03-01 16:22] :: Parsing hook [base]
[2009-03-01 16:22] :: Parsing hook [udev]
[2009-03-01 16:22] :: Parsing hook [autodetect]
[2009-03-01 16:22] :: Parsing hook [pata]
[2009-03-01 16:22] :: Parsing hook [scsi]
[2009-03-01 16:22] :: Parsing hook [sata]
[2009-03-01 16:22] :: Parsing hook [usb]
[2009-03-01 16:22] :: Parsing hook [usbinput]
[2009-03-01 16:22] :: Parsing hook [keymap]
[2009-03-01 16:22] :: Parsing hook [filesystems]
[2009-03-01 16:22] :: Generating module dependencies
[2009-03-01 16:22] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-03-01 16:22] ==> SUCCESS
[2009-03-01 16:22] ==> Building image "fallback"
[2009-03-01 16:22] ==> Running command: /sbin/mkinitcpio -k 2.6.28-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-03-01 16:22] :: Begin dry run
[2009-03-01 16:22] :: Parsing hook [base]
[2009-03-01 16:22] :: Parsing hook [udev]
[2009-03-01 16:22] :: Parsing hook [pata]
[2009-03-01 16:22] :: Parsing hook [scsi]
[2009-03-01 16:23] :: Parsing hook [sata]
[2009-03-01 16:23] :: Parsing hook [usb]
[2009-03-01 16:23] :: Parsing hook [usbinput]
[2009-03-01 16:23] :: Parsing hook [keymap]
[2009-03-01 16:23] :: Parsing hook [filesystems]
[2009-03-01 16:23] :: Generating module dependencies
[2009-03-01 16:23] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-03-01 16:23] ==> SUCCESS
[2009-03-01 16:23] upgraded kernel26 (2.6.28.5-1 -> 2.6.28.7-1)
[2009-03-01 16:23] upgraded ktorrent (3.1.6-2 -> 3.2-1)
[2009-03-01 16:23] upgraded libmad (0.15.1b-3 -> 0.15.1b-4)
[2009-03-01 16:23] upgraded libmysqlclient (5.0.75-2 -> 5.0.77-1)
[2009-03-01 16:23] upgraded libpng (1.2.34-1 -> 1.2.35-1)
[2009-03-01 16:23] upgraded xcb-proto (1.3-1 -> 1.4-1)
[2009-03-01 16:23] upgraded libxcb (1.1.93-1 -> 1.2-1)
[2009-03-01 16:23] upgraded libx11 (1.1.99.2-2 -> 1.2-1)
[2009-03-01 16:23] upgraded libxfont (1.3.4-1 -> 1.4.0-1)
[2009-03-01 16:23] upgraded libxi (1.2.0-1 -> 1.1.4-2)
[2009-03-01 16:23] upgraded man-pages (3.17-1 -> 3.18-1)
[2009-03-01 16:23] upgraded mysql-clients (5.0.75-2 -> 5.0.77-1)
[2009-03-01 16:23] upgraded mysql (5.0.75-4 -> 5.0.77-1)
[2009-03-01 16:23] upgraded ndiswrapper-utils (1.53-1 -> 1.54-1)
[2009-03-01 16:23] module configuration already contains alias directive
[2009-03-01 16:23]
[2009-03-01 16:23] upgraded ndiswrapper (1.53-4 -> 1.54-1)
[2009-03-01 16:23] upgraded pm-utils (1.2.4-1 -> 1.2.4-3)
[2009-03-01 16:23] upgraded postgresql-libs (8.3.5-1 -> 8.3.6-1)
[2009-03-01 16:23] upgraded qtcurve-kde4 (0.60.0-1 -> 0.61.4-1)
[2009-03-01 16:23] upgraded sqlite3 (3.6.10-1 -> 3.6.11-1)
[2009-03-01 16:23] upgraded tzdata (2009a-1 -> 2009b-1)
[2009-03-01 16:23] upgraded wine (1.1.15-1 -> 1.1.16-1)
[2009-03-01 16:23] upgraded xfsprogs (2.10.2-1 -> 3.0.0-1)
TIA,
Blackhole
Last edited by blackhole (2009-03-02 21:33:05)I'm still having problems with my screen flickering, jittering and causing me headaches.
Just to make sure it's not the Nvidia driver, I'm testing the open source driver right now instead of the official, proprietary Nvidia one, although it doesn't support any 3D.
I also have the suspicion that cpufrequtils might be the guilty bit. Has anybody had any graphic related problems when running cpufrequtils with the ondemand governor?
Does that make any sense? Could it be the cause of my graphic problems?
Last edited by blackhole (2009-03-13 06:51:02) -
Screen Flickering when using flash Player after suspend
Hey,
I've got a Samsung R40+ a pretty old Laptop everytime I set him to suspend and wake him afterwards the Screen flickers as soon as I use Flash player. I'ts mainly black and white stripes flashing across the screen especially bad when I watch Videos in Fulscreen. This happens with the Flashplugin aswell as with the Pepper-Flash in Chrome.
This has been an Issue Forever even back when I used Ubuntu I just Ignored it and never Let My Laptop suspend but if there is a solution I would love That.
Greeting SchtiehveHey,
I've got a Samsung R40+ a pretty old Laptop everytime I set him to suspend and wake him afterwards the Screen flickers as soon as I use Flash player. I'ts mainly black and white stripes flashing across the screen especially bad when I watch Videos in Fulscreen. This happens with the Flashplugin aswell as with the Pepper-Flash in Chrome.
This has been an Issue Forever even back when I used Ubuntu I just Ignored it and never Let My Laptop suspend but if there is a solution I would love That.
Greeting Schtiehve -
At selection-screen output and at selection-screen on
Hi Experts,
I had coded in both at selection-screen output for disabling input of certain fields and at selection-screen for validation like this:
AT SELECTION-SCREEN output.
IF p_amt = 'X'.
LOOP AT SCREEN.
CASE screen-name.
WHEN 'P_AMT'.
screen-input = '1'.
WHEN 'P_TST'.
screen-input = '1'.
WHEN 'P_B4C'.
screen-input = '1'.
WHEN 'P_AFC'.
screen-input = '1'.
WHEN 'P_COM'.
screen-input = '1'.
WHEN 'P_COM1'.
screen-input = '1'.
WHEN 'P_COM2'.
screen-input = '1'.
WHEN OTHERS.
screen-input = '0'.
ENDCASE.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
IF p_amt = 'X'.
LOOP AT SCREEN.
CASE screen-name.
WHEN 'P_AMT'.
screen-input = '1'.
WHEN 'P_TST'.
screen-input = '1'.
WHEN 'P_B4C'.
screen-input = '1'.
WHEN 'P_AFC'.
screen-input = '1'.
WHEN 'P_COM'.
screen-input = '1'.
WHEN 'P_COM1'.
screen-input = '1'.
WHEN 'P_COM2'.
screen-input = '1'.
WHEN OTHERS.
screen-input = '0'.
ENDCASE.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
IF p_pdf = 'X'.
LOOP AT SCREEN.
CASE screen-name.
WHEN 'P_PDF'.
screen-input = '1'.
WHEN 'P_TST'.
screen-input = '1'.
WHEN 'P_PATH'.
screen-input = '1'.
WHEN OTHERS.
screen-input = '0'.
ENDCASE.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
IF p_afc = 'X'.
LOOP AT SCREEN.
CASE screen-name.
WHEN 'P_TST'.
screen-input = '1'.
WHEN 'S_FID-LOW' OR 'S_FID-HIGH'.
screen-input = '0'.
WHEN 'S_ORG-LOW' OR 'S_ORG-HIGH'.
screen-input = '0'.
WHEN 'S_OFF-LOW' OR 'S_OFF-HIGH'.
screen-input = '0'.
WHEN 'S_DAT-LOW' OR 'S_DAT-HIGH'.
screen-input = '0'.
ENDCASE.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
AT selection-screen on block b5.
if p_tst is initial.
message text-016 type 'E'.
endif.
AT selection-screen on block b2.
if p_amt ne 'X' and p_pdf ne 'X'.
if s_fid is initial and s_org is initial.
message text-000 type 'E'.
endif.
if s_dat is initial.
message text-000 type 'E'.
endif.
endif.
when i comment out at selection-screen validations the input is disabled for the screen fields as set, else the validations are executed first.
Any solution for this???
Thanks in advance.AT SELECTION-SCREEN
Syntax
AT SELECTION-SCREEN selscreen_event.
Effect
This statement defines event blocks for different events selscreen_event that are triggered by the ABAP runtime environment during selection screen processing.
Selection screen events occur immediately before sending a selection screen and after certain user actions on a displayed selection screen. They assist in selection screen processing in the ABAP program.
AT SELECTION-SCREEN is triggered at least twice during actions on selection screens that are linked into another selection screen as a subscreen - first for the linked selection screen itself, and then for the linking selection screens.
Note
The event blocks after AT SELECTION-SCREEN are implemented internally as procedures. Declarative statments in these event blocks create local data.
Maybe you are looking for
-
am not able to log in to my user account after installation of OSXLion,have called up the support centre many times,but was left in vain ...i belief its a simple problem ,but why is apple support center not able to help me out ...have given them all
-
I have an erra message on my officejet 8500 pro.
HP Officejet Pro 8500 all in one printer, fax, scanner Product # CB022A Operating system: Window XP Erra Message: Pump motor stalled I have made no changes. I did follow the trouble shooting guide. I unpluged the unit from the wall and the machin
-
hey everybody. I was wondering if anyone could help me with something. I have an iMac g4 snowball. It has a 700 MH Processor.I would like to put a newer processor in it. It is the best computer I have ever used as far as architecture. My own opinion
-
How to access downloaded add ons in windows 8
add ons show in manage addons area, how do find them so I can use them icons not in customize tool bar option McAfee site check add on in on add on bar at bottom but other add ons are not
-
Copy of an existing spec - cross references
Hello, Is there configuration that would change the behavior of a spec copy to carry over the original cross references? When we do a copy, it clears the cross references, we are wanting to change that. thanks, David