Screen flickers with safari version 8.0.2. I'm running Yosemite 10.10.1. Reseted safari, rebooted, etc. Nothing works. Ideas?
Screen flickers with safari version 8.0.2. I'm running Yosemite 10.10.1. Reseted safari, rebooted, etc. Nothing works.
Ideas on how to fix?
The flickering doesn't always happen but does come back after some time of use.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
Similar Messages
-
My screen just went haywire. The screen flickered with red strips vertically. I thought it was part of the game I was operating until the screen went black and a white strip illiminated at the top. I tried turning teh system off, but it would not allow me to turn it off. After about 5 minutes, I was able to turn it off. Anyone have this occur? The Ipad mini appears to be ok now.
I Also have this problem!!
In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason. At first I thought the screen was dead, but discovered the heat solution by accident. Now I turn it on and keep it from going to sleep until I go to bed. Thank goodness the battery is still awesome on this thing.
I bought it new and still has the original screen, I keep it at home (never below 62 degrees). Coincidentally, this happened a day or two after the expiration of the warranty!! Any help figuring this one out would be eternally appreciated.
iPad mini retina Wi-Fi, iOS 8.1.3 -
Hi all,
how do I fix the App Store cannot verify a secure connection with the App Store. in mountain lion tried safari reset, changing the MTU nothing works at this time. I am using a IMac ML 10.8.2
Would like some help please.
GeeHi all,
how do I fix the App Store cannot verify a secure connection with the App Store. in mountain lion tried safari reset, changing the MTU nothing works at this time. I am using a IMac ML 10.8.2
Would like some help please.
Gee -
My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked briefly as a temporary fix but not anymore
You could try this
Temporarily disable security on your home network
See if the iPad connects
If it does then reset the security - with the same or different password -
Can not use default screen saver with this version of Mac OS X
Hello,
I created a 10.6.4 image on a Mac Pro that I have installed on a new 27" iMac. Every thing works fine, as expected, except the screen savers (all Apple default). All screen savers appear in the list when booted off the Mac Pro, but when booted off the iMac, all but 2 disappear (Computer Name and Flurry). Also, the ones listed under Pictures show up, but when I try to use one it says "Can not use 'screen saver name' with this version of Mac OS X - Contact your vendor."
Also, the flurry screen saver runs extremely slow.
Unfortunately, I don't have another iMac to compare versions with, but I've compared with a new Macbook Pro and they are exactly the same. Is there a cache or a pref I can flush?The old screensavers were about the first things that didn't work when moving to Snow Leopard, so my guess would be the iMac is booting in 32-bit vs 64-bit mode (or whichever mode is incompatible with your screensavers).
-
Screen flickers with multi coloured lines... then dies
I really hope someone out there can help...
My iphone is only a couple of months old (bought it first day of release in Australia) and now it is starting to break down.
When i press the home key, the screen flickers and has these strange multi coloured lines accross it. Then sometimes it will then restart on the apple logo.
Is there a fix, or do i need to send it back? Will they replace it on the spot?Page 34 iphone users guide:
"If something is not working right, restarting or resetting iPhone will likely solve the
problem.
Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears.
Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and
hold the Sleep/Wake until the Apple logo appears.
Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the
same time for at least ten seconds, until the Apple logo appears.
For more troubleshooting suggestions, see Appendix A, “Troubleshooting,” on
page 132. "
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf -
How do I access compacted mail on a Mac version 10.5.8 stuck with Thunderbird version 16.0.2 ? I am unable to access needed documentation for Taxes, etc
Where in the world did you read Deleting All My Mail? I have reread my answer several times and cannot seem to find that in there.
When you mark a message for deletion it does just that. It marks it for deletion and hides the message. It is not truly deleted until you compact.
My point is that unless you deleted your important mail they should still be there somewhere.
Your question was about compacting and thinking it put your messages in a nice little box for safe keeping and now you want to open it.
I have to agree that Thunderbird did a horrible job of naming this process because most are like you and do not understand what it actually does. I included the link to the explanation of what compacting means in the Thunderbird world.
Your messages may still be available to your but finding them has nothing to do with compacting.
Thunderbird does not archive anything unless you use that process by selecting the message and pressing a. You have the option to setup where you want that archive to go and what folders to make.
The All Mail folder is a goofy gmail arrangement. If you have problems with that then you need to address that with Google.
If you go into your gmail account on the gmail site do you see the messages you are hunting in the All Mail folder there? -
As soon as i type a letter in fire fox it stops working, i get (FIRE FOX IS NOT RESPONDING, WINDOWS IS NOT INTERACTING WITH FIREFOX) I have tried all i can and now give up. Ive cleared all cookies and catch, etc i have gone in to help and tried out instructions for the not responding but no luck. I have windows 7 and have not had problems in the past with firefox. I have uninstalled and reinstalled still no luck.
go to '''TOOLS '''then '''OPTIONS''' then '''ADVANCED''' then '''NETWORK tab''' then '''SETTINGS tab''' and select the options '''NO PROXY''' click '''OK''' and '''OK '''again in the next screen. With that you have disabled the proxy settings.
''if you like to not disable the proxy settings choose'' : '''Auto-detect proxy settings for this network''' (it is in the same session)
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
After I upgraded to yosemite my screen flickers with windows, very strange.
So, after I upgraded to Yosemite, in spurts, there are flickers of windows at random positions around the screen.
It doesn't seem to depend on what applications are running. However I'm usually running Safari, so perhaps it depends on Safari.
Let me describe what the picture below is:
I took an iPhone video of my computer screen, used VLC and slowed down the video to (really really) slow, and then took a screen snap shot during the flicker.
So, if you look at the weirdness, it is a ghost of the entire screen, but, obviously, not in the right place. These fickers can be frequent, like, "bididididi (pause) bidididid (pause)," or in frequent like, "bip (wait a very long time) bip (wait a very long time, perhaps hours)."
This never ever happened with Mountain lion.
About my mac says:
Is anyone else experiencing this problem?Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Internet Explorer 11 constantly causes screen flickering with Windows 8.1
My screen is constantly flickering and sometimes tabs go blank (white) for no reason while using IE11 with Windows 8.1. This does not happen with other browsers. My resolution and refresh rate for my monitor are both set to recommended settings
and my Windows and drivers are all up to date.Hi,
According to your description, this problem might be related to :
1.”Add-ons”:Have you download any add-ons like Active-X and other objects recently?
2.The “Enhanced protected mode”.
3.The “Accelerated graphic”.
Solutions
First of all ,you can open the Action center\Troubleshooting\ Programs to use the troubleshooting tool to check whether it can detect something or give us any useful diagnostic reports .
Run “iexplore.exe –extoff “ to open the IE with all
the “Add-ons” disabled ,if this problem disappears ,the problem may be caused by the “Add-ons” ,you can open “Manage Add-ons” in the IE tools to enable the add-ons one by one to check which add-on contributes to this problem.
Open the “Internet options”, choose the “Security” tab , disable the “Enable Protected Mode” ,restart the IE to check whether it works.
Internet Explorer 11 flickers and a box (Windows Installer) flashes.
http://answers.microsoft.com/en-us/ie/forum/ie11-iewindows8_1/internet-explorer-11-flickers-and-a-box-windows/40e8b992-f804-43c4-9f3a-15b383d6d8aa
Open the “Internet options”, choose the “Advanced” tab ,tick or untick “Use software
rendering instead of GPU rendering” and check the result
If these steps don`t work , please
open the Event viewer\ Applications and services logs\ Internet
explorer to check if we can get any error\warning information.
Best regards -
Screen flickering with sequencer
When using the sequencer to switch to different worksheets, there is a lot of annoying screen flickkering (especially with big worksheets on slow computers).
How could this be suppressed?
I only want to see the next layout and nothing else!
Any solutions?
Thanx
PeterIt still takes time to load, but you can minimize some of the flickering by minimizing and hidiing all display windows when you save, and save the worksheet from the layout view.
There is a setting in the Global settings that will suspress the worksheet load status - that will help with some of the flickering.
Other than that, there's not much that we can do. Each module loads and initializes itself, so the flicker is from the initialization.
I wish there were a way to hide all of that...
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab. -
Re: Qosmio F - Screen flickering with AC adapter
Hi,
I have a problem with the screen fo my qosmio. When it is on ac it flickers when it is only with battery not.
Do you think that is a problem with the adapter only?
Thanks
PanasHi panas,
If it happens with AC adapter only it could be a grounding issue. Do you use the original Toshiba AC/DC adapter or 3rd party adapter?
By the way: What Qosmio notebook you have exactly?
Does this also happen if you connect an external monitor or only with internal one? -
MOVED: Screen Flickering with an MSI R9 270x 2GB Gaming OC edition graphics card
This topic has been moved to GAMING Graphics Cards.
https://forum-en.msi.com/index.php?topic=252552.0A vbios update does not help in 90% of cases. Run the Gaming APP in OC or Gaming mode and see if that helps: http://download.msi.com/uti_exe/gamingApp.zip
If not add S/N and save the current vbios to file, upload it to some file hoster and add link here. If not allowed to post links yet, mask it by XX at beginning and end (e.g. XXlink.comXX) -
Iphone 4 Crashes and screen flickering with IOS 7.0.4
Is getting worse, Apple should either fix the IOS 7 or help us to downgrade to IOS 6
my iphone4 16GB don't have any such problems could be a hardware defect which just by freak chance happpend around the same time as you upgraded
be sure to restart the ios device to make sure it's in a stable state
http://support.apple.com/kb/HT1430?viewlocale=en_US&locale=en_US -
I edit a web site set up by Joomla.
I copy & paste text to it and upload photographs.
I have been doing this successfully for months
but starting yesterday adding text is OK but when I try to upload a photo there is a delay of 3-4 minutes and then an error message saying "The connection was reset"Your plugins list shows two Flash plugins and other outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r45
# Shockwave Flash 10.1 r53
# Adobe Shockwave for Director Netscape plug-in, version 11.0
# Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
Flash Player uninstall: http://www.adobe.com/go/tn_14157 (this will remove the Firefox Flash plugin and the ActiveX control for IE)
Update the [[Flash]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
*http://www.adobe.com/shockwave/welcome/
*http://www.adobe.com/downloads/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]
Maybe you are looking for
-
My Mac Mini is running on iOS 10.6.8 can it be loaded with 7.0 or higher?
My Mac Mini is running on iOS 10.6.8 can it be loaded with 7.0 or higher?
-
Firefox Mobile 4 beta 3 (and pre-beta 4) fails to install on Archos 101 Tablet using Android 2.1 Eclair with no specific error. Is this a know issue or has someone been able to successfully install?
-
Take result from adding 2 txtboxes 2gether then label.setText = result ?
I have 2 text boxes and I want to add [mathimatically +] their contents together then dispaly the result in a label when a button in clicked. I am using Net Beans 6. I have not found how to do this online so any help would be apriciated. Code Follows
-
this is not working var currDate:Date = new Date(); txtTest.text = currDate; box is empty also when I find something that works, to parse out yyyy mm and dd I have seen these examples, not sure at this point which one would work or both? var currentD
-
Email Submission receipt of Send Now PDF file
I am using Adobe Send. When I send a PDF to a customer how can I get a email back that shows me that they have opened the file. I would get that when using Adobe SendNow.