Screen font recently turned uglier... 10.4.5?
Not sure how this happened. For the past few days I noticed that the screen of my powerbook is less readable. The fonts do not look as good. It seems however, like the anti-aliasing is on. I first noticed it when hooking up a second screen and realizing after a while that the contrast on the powerbook screen was very low.
the fonts look gray and I wonder what could explain this? I wonder if it could be the display itself. Has someone run into similay problems with the latest OS upgrade?
Any suggestions would be greatly appreciated. I guess my next step might be to reinstall, but I'd rather avoid this.
PowerBook G4 15" 1.5GHZ Mac OS X (10.4.5)
I haven't heard of that before personally but there are two troubleshooting ideas that come to mind:
1. login as a new user on your computer and see how it looks. they'll have fresh settings so it should be a rather pure look at your computer.
2. if the other user does not have the problem then look into any fonts you have installed in /~youraccount/Library/Fonts.
Without being familiar with your issue I don't know of it is a font issue or a hardware issue. Both are annoying.
Similar Messages
-
Terminal fonts turned ugly after last update
Terminal font Monospace 11 turned ugly after today's system update.
Before that, I even didn't use antialiasing, so nice and crisp they were.
Turning antialiasing on helps partially, but this font looks kinda blurry.
I am running Xfce4 under Arch64. Here is the fonts part from xorg.conf:
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/encodings"
FontPath "/usr/share/fonts/util"
EndSection
And yes, I am using Community, Extra and Testing depositories.
My screen is LCD 1440x900 with 96x96 resolution.same thing happened to me gnome-terminal font
-
I have an iPhone 4 and recently updated the software. Since then, the screen will not turn off consistently after the 1 minute auto-lock. How do I fix this?
Settings>General>Auto Lock
-
Hello all,
I have a Model - MacBook Pro Laptop and the screen recently turned the colour grey, giving me no visibility or access to the unit.
Has anyone had or seen this problem before? Can it be fixed? I had a repair guy from my local Mac Store take a look at it - he said I needed a whole new screen and top of the computer, but this didn't fix the problem. I took the unit home unrepaired, and a week later it was all of a sudden working fine.
What is happening with my Laptop? Once this happens (grey screen) does it mean that it's going to become a chronic problem?
Please advise....ThanksIt's kind of difficult to diagnosis your problem without a visual clue, because there is a (mostly) software based "gray screen" at boot issue.
But if you got the screen replaced, took it home and now it works, why the repair shop didn't get it working before it left the store is beyond me.
Unless the repair shop is a authorized apple reseller/repair, I wouldn't have taken it to them, and of you did, they should have fixed the issue right away. -
Hello All,
I have a 15" i7 Macbook Pro from early 2011. The past few weeks, it has been getting increasingly difficult to get on my computer. It takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get to the dark gray log-in screen. Even when I finally get logged in to start working, thinking it would be okay now, it shuts down randomly.
I've ruled out the possibility of a software problem because I've just done a clean re-install of Mac OS X Mavericks on my computer just yesterday.
I did upgrade the RAM recently, about a month and a half ago, from 4GB to 16GB, I went to the apple store four days after that upgrade to have them do a hardware test, and clean the inside of my laptop, which helped with previous heat issues. When they did the hardware test, the hardware was all registered as fine from their system.
I've tried resetting the SMC, PRAM, and doing the internet recovery hardware test, but to no avail. I thought I could at least find out what parts needed to be replaced from the hardware test but it seems that when the hardware test is almost finished, the computer just shuts down, So I am unable to see the results.
My computer is also having battery issues, under battery condition, it says "replace now," parts have been ordered, waiting for arrival. But if the battery health is low, it should still boot up fine, it would just hold a significantly less charge.
Could this be a hard drive issue?
Has anyone had similar symptoms and how was it resolved?
Does anyone know what I can do to alleviate this issue?
I haven't had time to take it to Apple because I'm currently taking a 21 credit semester academically. I'm an art and design student so my computer is basically the bane of my existence. Help! Any constructive advice is welcomed!
Thank you so much for your input!
-Christina C.Problem description:
The Hard Disk is failing.
EtreCheck version: 2.0.11 (98)
Report generated November 4, 2014 at 7:59:28 AM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:3:43
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
HDV4 (disk0s2) / [Startup]: 749.30 GB (712.10 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.avast.userinit.plist Support
Launch Daemons: ℹ️
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[invalid?] com.perion.searchprotectd.plist Support
User Launch Agents: ℹ️
[invalid?] com.avast.home.userinit.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.jdibackup.ZipCloud.autostart.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
AdobePDFViewer: Version: 10.1.1 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins: ℹ️
TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
Avast Online Security
Trovi Search for Safari
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
16% mds
7% WindowServer
1% loginwindow
1% fontd
1% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB com.avast.daemon
86 MB Google Chrome
52 MB Finder
52 MB WindowServer
41 MB Google Chrome Helper
Virtual Memory Information: ℹ️
13.45 GB Free RAM
1.34 GB Active RAM
944 MB Inactive RAM
1.43 GB Wired RAM
1.11 GB Page-ins
0 B Page-outs -
Screen doesn't turn on after resuming from standby- Windows XP
Hi all,
I have a Lenovo 3000 N200 with Windows XP SP3 (recently installed xp), and my laptop goes to sleep fine, but when I try to wake it up from standby, the computer turns on fine, but the screen does not turn on at all. The hdd LED shows that the hdd is doing something, but the screen does not turn on at all. I've tried pressing keys on the keyboard, moving the mouse but still no luck. So since I cannot get my laptop out of sleep, I have to hold the power button and power the laptop off and then back on again. I do not wish to keep doing this since you can corrupt your hdd by doing this too much.
Any help would be highly appreciated..
Thankyou,
From Dean.S
Message Edited by Deano019 on 01-31-2009 01:57 PM
Message Edited by Deano019 on 02-03-2009 04:19 PM
Lenovo 3000 N200 0687-A11: T5450(1.66GHz), 2GB RAM, 120GB 5400rpm HD, 14.1in 1280x800, Intel X3100, CDRW/DVDRW, Intel 802.11agn, Bluetooth, Modem, 10/100 Ethernet, Fingerprint reader, Camera, 6c Li-Ion, Windows 7 Ultimate!Sorry, theres no Security chip option in my BIOS.
Lenovo 3000 N200 0687-A11: T5450(1.66GHz), 2GB RAM, 120GB 5400rpm HD, 14.1in 1280x800, Intel X3100, CDRW/DVDRW, Intel 802.11agn, Bluetooth, Modem, 10/100 Ethernet, Fingerprint reader, Camera, 6c Li-Ion, Windows 7 Ultimate! -
PSE 9 Editor Screen Font Too Small
I just upgraded to PSE 9 when I purchased a new PC and High Def monitor set at the recommended resolution of 1920x1080. Now the font in the Editor is so small I cannot read it. Changing the monitor DPI does not change the Editor font. Is there a way to increase the Editor screen font? I purchased the new PC and monitor specifically for PSE and Premier Elements use but haven't been able to get there yet.
I'm assuming by screen font, you mean the size of the type in the Editor, such as the type in the pull-down menus. Obviously I can't know exactly how small your type is, but I recently "upgraded" from PSE 5 to 9 and found the type on the tools and menus to be small and hard to read. The main problem is the type is all white and reversed out of dark black. Don't the Adobe developers know that reverse type is harder to read than black on white? The little black arrows on each tool that has options is almost impossible to see unless I work at night with no lights in the room.
-
My macbook screen won't turn on and it keeps beeping at me...help!
I tryed turning on my macbook pro 13'' and the screen won't turn on and it keeps beeping at me and flashing the white light on the front of the computer at the same time. any suggestions?
Beeping sounds usually indicate a RAM or logicboard problem.
If you have third party RAM recently installed, put the factory RAM back in.
Use the free MacTracker to find out your correct RAM spec and return the defective RAM for a exchange or buy top tier RAM from Crucial.com or OtherWorld Computing.
If you didn't mess with the RAM, take the machine to Apple for a free eval.
You might want to read this if the repair bill is not worth it.
My computer is not working, is my personal data lost? -
Editing contents of screen font suitcases in OSX
I've received a number of fonts from clients in which the suitcase containing the screen fonts contains numerous additional screen fonts which I would like to remove.
For example, suppose a client has supplied a new font called "Obscurefont" which I need. The printer font for "Obscurefont" has been supplied as a separate file, as well as a screen font suitcase called "Bunchafonts". This screen font suitcase contains the needed screen font for "Obscurefont," but it also contains numerous other screen fonts for Helvetica, Times, etc. which are not necessary, and which often create font conflicts.
To fix this problem back in the old days, I would boot up my old G3 in OS9, double-click on the screen font suitcase, and drag out the offending extra screen fonts into the trash.
Is there any way, short of dusting off an old machine capable of booting in OS9, of editing the contents of a screen font suitcase?I checked out a discussion on the OSX 10.4 forum which solved my problem, and made me feel a wee bit nostalgic... Turns out that the old "Font/DA Mover" app from years ago (System 6?) still runs in Classic mode, and it can still edit the contents of screen font suitcases. Painfully slow, but it works.
-
Log in screen appear after Mac goes to sleep even if screen lock is turned off.
Log in screen appear after Mac goes to sleep even if screen lock is turned off. This happens usually but not always. Using Yosemite, 2 year old iMac. This has only started to occur recently and it happened in Mavericks also.
Howdy stkh,
You may want to check the General pane of the Security & Privacy System preferences to make sure that the Require password...after sleep or screen saver begins is not checked. See this article for reference -
OS X Yosemite: General pane of Security & Privacy preferences
Thanks for using Apple Support Communities.
Best,
Brett L -
Z1 compact. Screen won't turn on
Recently updated to Lollipop OS. My problem is my screen won't turn on automatically when there is new messages/ notifation. I had to hit power button to view notifications. Except for downloading notification app, which helps drain my battery, any solution?
Let me understand this, because your first post said that your phone used to turn on the "screen" when you received a notification, the phone didn't, the only way to do this is through a third party app. Now you are saying that the issue is the notification LED that its not turning on? do you have the phone on stamina mode? silent mode?
-
Laptop screen does not turn on after resume from suspend/hibernate
I use systemctl suspend/hibernate to resume, but the screen does not turn on from resume. everything else still functions just fine, meaning i can type in reboot and reboot, but a "turned off" black screen.
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)
00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150204 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 07:08:20 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
[ 0.000000] tseg: 009ff00000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f8f4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f8f5000-0x000000009f939fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f93a000-0x000000009f951fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009f952000-0x000000009f954fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f955000-0x000000009f955fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f956000-0x000000009f96cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f96d000-0x000000009f974fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f975000-0x000000009f9a4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f9a5000-0x000000009f9a5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9a6000-0x000000009f9b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f9b6000-0x000000009f9c3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9c4000-0x000000009f9c5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f9c6000-0x000000009f9ccfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9cd000-0x000000009fa02fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fa03000-0x000000009fc05fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fc06000-0x000000009fd78fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fd79000-0x000000009fef5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fef6000-0x000000009fefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: TOSHIBA Satellite L775D/TKBSS, BIOS 1.40 07/22/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
[ 0.000000] 1 base 009FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 base 00A0000000 mask FFE0000000 uncachable
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0x9ff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f] mapped at [ffff8800000fcf30]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff]
[ 0.000000] [mem 0x220000000-0x23edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9f8f4fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
[ 0.000000] [mem 0x9f800000-0x9f8f4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9f955000-0x9f955fff]
[ 0.000000] [mem 0x9f955000-0x9f955fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9f9a6000-0x9f9b5fff]
[ 0.000000] [mem 0x9f9a6000-0x9f9b5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9fc06000-0x9fd78fff]
[ 0.000000] [mem 0x9fc06000-0x9fd78fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9fef6000-0x9fefffff]
[ 0.000000] [mem 0x9fef6000-0x9fefffff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37652000-0x37b20fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 TOSASU)
[ 0.000000] ACPI: XSDT 0x000000009F93A070 000064 (v01 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009F94E438 0000F4 (v04 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x000000009F93A168 0142CF (v02 TOSASU TOSASU00 00000140 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009F9C6F80 000040
[ 0.000000] ACPI: APIC 0x000000009F94E530 000072 (v03 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x000000009F94E5A8 0000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000004)
[ 0.000000] ACPI: SLIC 0x000000009F94E670 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001)
[ 0.000000] ACPI: MCFG 0x000000009F94E7E8 00003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000009F94E828 000038 (v01 TOSASU TOSASU00 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 0x000000009F94E860 000E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009F94F698 00193D (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23eff8000-0x23effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x9f8f4fff]
[ 0.000000] node 0: [mem 0x9f955000-0x9f955fff]
[ 0.000000] node 0: [mem 0x9f9a6000-0x9f9b5fff]
[ 0.000000] node 0: [mem 0x9fc06000-0x9fd78fff]
[ 0.000000] node 0: [mem 0x9fef6000-0x9fefffff]
[ 0.000000] node 0: [mem 0x100001000-0x23effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1960479
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10155 pages used for memmap
[ 0.000000] DMA32 zone: 649859 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f8f5000-0x9f939fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f93a000-0x9f951fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f952000-0x9f954fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f956000-0x9f96cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f96d000-0x9f974fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f975000-0x9f9a4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9a5000-0x9f9a5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9b6000-0x9f9c3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9c4000-0x9f9c5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9c6000-0x9f9ccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9cd000-0x9fa02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa03000-0x9fc05fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fd79000-0x9fef5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0x9ff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023ec00000 s86336 r8192 d32448 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1929823
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7635708K/7841916K available (5531K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 206208K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1397.380 MHz processor
[ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.20 BogoMIPS (lpj=4657933)
[ 0.000046] pid_max: default: 32768 minimum: 301
[ 0.000053] ACPI: Core revision 20141107
[ 0.000055] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.000123] ACPI: Forced DSDT copy: length 0x142CF copied locally, original unmapped
[ 0.015021] ACPI: All ACPI Tables successfully acquired
[ 0.016280] Security Framework initialized
[ 0.016286] Yama: becoming mindful.
[ 0.016907] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.019182] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.020189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020201] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020472] Initializing cgroup subsys memory
[ 0.020479] Initializing cgroup subsys devices
[ 0.020482] Initializing cgroup subsys freezer
[ 0.020484] Initializing cgroup subsys net_cls
[ 0.020487] Initializing cgroup subsys blkio
[ 0.020510] CPU: Physical Processor ID: 0
[ 0.020511] CPU: Processor Core ID: 0
[ 0.020513] mce: CPU supports 6 MCE banks
[ 0.020522] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
[ 0.020644] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.021880] ftrace: allocating 21166 entries in 83 pages
[ 0.035456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068473] smpboot: CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
[ 0.174081] Performance Events: AMD PMU driver.
[ 0.174086] ... version: 0
[ 0.174087] ... bit width: 48
[ 0.174088] ... generic registers: 4
[ 0.174089] ... value mask: 0000ffffffffffff
[ 0.174090] ... max period: 00007fffffffffff
[ 0.174091] ... fixed-purpose events: 0
[ 0.174092] ... event mask: 000000000000000f
[ 0.191034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.197738] x86: Booting SMP configuration:
[ 0.197744] .... node #0, CPUs: #1 #2 #3
[ 0.250891] x86: Booted up 1 node, 4 CPUs
[ 0.250896] smpboot: Total of 4 processors activated (11183.83 BogoMIPS)
[ 0.252264] devtmpfs: initialized
[ 0.257696] PM: Registering ACPI NVS region [mem 0x9f8f5000-0x9f939fff] (282624 bytes)
[ 0.257715] PM: Registering ACPI NVS region [mem 0x9f952000-0x9f954fff] (12288 bytes)
[ 0.257718] PM: Registering ACPI NVS region [mem 0x9f96d000-0x9f974fff] (32768 bytes)
[ 0.257721] PM: Registering ACPI NVS region [mem 0x9f9a5000-0x9f9a5fff] (4096 bytes)
[ 0.257724] PM: Registering ACPI NVS region [mem 0x9f9b6000-0x9f9c3fff] (57344 bytes)
[ 0.257727] PM: Registering ACPI NVS region [mem 0x9f9c6000-0x9f9ccfff] (28672 bytes)
[ 0.257729] PM: Registering ACPI NVS region [mem 0x9fa03000-0x9fc05fff] (2109440 bytes)
[ 0.258125] pinctrl core: initialized pinctrl subsystem
[ 0.258173] RTC time: 18:50:52, date: 02/22/15
[ 0.258343] NET: Registered protocol family 16
[ 0.270952] cpuidle: using governor ladder
[ 0.284279] cpuidle: using governor menu
[ 0.284490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.284493] ACPI: bus type PCI registered
[ 0.284495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.284605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.284608] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.285035] PCI: Using configuration type 1 for base access
[ 0.299021] ACPI: Added _OSI(Module Device)
[ 0.299025] ACPI: Added _OSI(Processor Device)
[ 0.299027] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.299029] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.300870] ACPI : EC: EC description table is found, configuring boot EC
[ 0.302900] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.831121] ACPI: Interpreter enabled
[ 0.831132] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.831140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.831167] ACPI: (supports S0 S3 S4 S5)
[ 0.831169] ACPI: Using IOAPIC for interrupt routing
[ 0.831382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.842727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.842738] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.843157] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.843782] PCI host bridge to bus 0000:00
[ 0.843788] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.843792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.843796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.843800] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.843803] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.843806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.843810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.843813] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.843825] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
[ 0.843978] pci 0000:00:01.0: [1002:9647] type 00 class 0x030000
[ 0.843993] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.844002] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.844011] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.844070] pci 0000:00:01.0: supports D1 D2
[ 0.844185] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
[ 0.844197] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[ 0.844272] pci 0000:00:01.1: supports D1 D2
[ 0.844388] pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
[ 0.844483] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.844641] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.844665] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
[ 0.844678] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
[ 0.844690] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
[ 0.844703] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
[ 0.844715] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
[ 0.844728] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4e000-0xfeb4e7ff]
[ 0.844896] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.844914] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
[ 0.845044] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.845114] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.845138] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
[ 0.845242] pci 0000:00:12.2: supports D1 D2
[ 0.845245] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.845313] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.845383] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.845400] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
[ 0.845529] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.845599] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.845623] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
[ 0.845727] pci 0000:00:13.2: supports D1 D2
[ 0.845730] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.845799] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.845867] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.846051] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
[ 0.846069] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
[ 0.846081] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
[ 0.846094] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
[ 0.846107] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
[ 0.846119] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
[ 0.846145] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.846148] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.846151] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.846154] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.846275] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.846303] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.846387] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.846454] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.846515] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.846704] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.846806] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.846879] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.846982] pci 0000:00:15.0: supports D1 D2
[ 0.847053] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.847122] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 0.847225] pci 0000:00:15.1: supports D1 D2
[ 0.847296] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.847363] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.847466] pci 0000:00:15.2: supports D1 D2
[ 0.847537] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.847610] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.847628] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
[ 0.847757] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.847827] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.847851] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
[ 0.847956] pci 0000:00:16.2: supports D1 D2
[ 0.847959] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.848026] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.848093] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.848228] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.848359] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.848490] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.848632] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.848762] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.848892] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.849021] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.849252] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.849360] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.849372] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.849376] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.849379] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.849383] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.849387] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.849390] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.849394] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.849483] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.849617] pci 0000:04:00.0: [10ec:8176] type 00 class 0x028000
[ 0.849646] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.849687] pci 0000:04:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
[ 0.849834] pci 0000:04:00.0: supports D1 D2
[ 0.849837] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.849878] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.854467] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.854488] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.854499] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.854661] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
[ 0.854688] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.854722] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.854743] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.854860] pci 0000:05:00.0: supports D1 D2
[ 0.854863] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.854907] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.861144] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.861165] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.861180] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.861237] acpi PNP0A03:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.861791] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
[ 0.861823] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
[ 0.861855] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
[ 0.861887] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
[ 0.861918] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
[ 0.861951] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
[ 0.861981] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
[ 0.862011] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
[ 0.862041] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
[ 0.862071] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
[ 0.862101] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
[ 0.862130] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
[ 0.862160] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
[ 0.862190] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
[ 0.862219] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
[ 0.862249] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
[ 0.862279] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
[ 0.862309] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
[ 0.862338] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
[ 0.862368] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
[ 0.862398] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
[ 0.862428] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
[ 0.862457] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
[ 0.862487] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
[ 0.862517] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
[ 0.862546] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
[ 0.862576] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
[ 0.862606] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
[ 0.862635] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
[ 0.862665] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
[ 0.862695] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
[ 0.862726] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
[ 0.862781] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.862883] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.862986] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863084] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863164] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863228] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863292] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863356] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.864141] ACPI : EC: GPE = 0xc, I/O: command/status = 0x66, data = 0x62
[ 0.864446] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.864452] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.864464] vgaarb: loaded
[ 0.864466] vgaarb: bridge control possible 0000:00:01.0
[ 0.864788] PCI: Using ACPI for IRQ routing
[ 0.874741] PCI: pci_cache_line_size set to 64 bytes
[ 0.874840] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.874844] e820: reserve RAM buffer [mem 0x9f8f5000-0x9fffffff]
[ 0.874848] e820: reserve RAM buffer [mem 0x9f956000-0x9fffffff]
[ 0.874851] e820: reserve RAM buffer [mem 0x9f9b6000-0x9fffffff]
[ 0.874854] e820: reserve RAM buffer [mem 0x9fd79000-0x9fffffff]
[ 0.874856] e820: reserve RAM buffer [mem 0x9ff00000-0x9fffffff]
[ 0.874859] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.875079] NetLabel: Initializing
[ 0.875081] NetLabel: domain hash size = 128
[ 0.875083] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.875101] NetLabel: unlabeled traffic allowed by default
[ 0.875143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.875149] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.877246] Switched to clocksource hpet
[ 0.884868] pnp: PnP ACPI init
[ 0.885072] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.885079] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.886017] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.886021] system 00:01: [io 0x040b] has been reserved
[ 0.886025] system 00:01: [io 0x04d6] has been reserved
[ 0.886029] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.886032] system 00:01: [io 0x0c14] has been reserved
[ 0.886036] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.886039] system 00:01: [io 0x0c52] has been reserved
[ 0.886042] system 00:01: [io 0x0c6c] has been reserved
[ 0.886046] system 00:01: [io 0x0c6f] has been reserved
[ 0.886049] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.886052] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.886056] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.886059] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.886063] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.886067] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.886070] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.886074] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.886082] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.886086] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.886091] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.886096] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.886100] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.886104] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.886107] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.886112] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.886116] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.886120] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886180] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.886279] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.886283] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886420] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.886424] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886523] pnp 00:06: Plug and Play ACPI device, IDs TOS0220 SYN1d00 SYN0002 PNP0f13 (active)
[ 0.886596] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.886784] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.887277] pnp: PnP ACPI: found 9 devices
[ 0.895955] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.895964] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.895969] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.896008] pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.896012] pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.896016] pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.896026] pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.896039] pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896046] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.896051] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.896056] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 0.896061] pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.896067] pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896073] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.896089] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.896103] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.896107] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.896114] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.896124] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.896129] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.896138] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.896147] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.896151] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.896154] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.896157] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.896160] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.896164] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.896167] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.896171] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.896174] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.896178] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896182] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.896185] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.896188] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.896191] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.896194] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.896198] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.896201] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.896205] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.896208] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.896212] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.896215] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.896259] NET: Registered protocol family 2
[ 0.896597] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.896863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.897301] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.897360] TCP: reno registered
[ 0.897379] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.897467] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.897618] NET: Registered protocol family 1
[ 0.897646] pci 0000:00:01.0: Video device with shadowed ROM
[ 1.838171] PCI: CLS 64 bytes, default 64
[ 1.838242] Unpacking initramfs...
[ 1.934095] Freeing initrd memory: 4924K (ffff880037652000 - ffff880037b21000)
[ 1.934107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.934110] software IO TLB [mem 0x9b8f5000-0x9f8f5000] (64MB) mapped at [ffff88009b8f5000-ffff88009f8f4fff]
[ 1.934495] microcode: CPU0: patch_level=0x03000014
[ 1.934537] microcode: CPU1: patch_level=0x03000014
[ 1.934580] microcode: CPU2: patch_level=0x03000014
[ 1.934625] microcode: CPU3: patch_level=0x03000014
[ 1.934758] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.934766] LVT offset 0 assigned for vector 0x400
[ 1.934817] perf: AMD IBS detected (0x000000ff)
[ 1.934854] Scanning for low memory corruption every 60 seconds
[ 1.935293] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.935315] Initialise system trusted keyring
[ 1.935789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.937285] zpool: loaded
[ 1.937288] zbud: loaded
[ 1.937658] VFS: Disk quotas dquot_6.5.2
[ 1.937709] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.937948] Key type big_key registered
[ 1.938436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.938508] io scheduler noop registered
[ 1.938511] io scheduler deadline registered
[ 1.938546] io scheduler cfq registered (default)
[ 1.939375] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.939380] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.939399] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.939403] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.939421] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.939423] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.939428] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.939447] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[ 1.939449] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.939453] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[ 1.939461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.939494] pciehp 0000:00:02.0:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 1.939528] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
[ 1.939533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.939550] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[ 1.939552] vesafb: scrolling: redraw
[ 1.939554] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.939576] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3904k, total 3904k
[ 1.955978] Console: switching to colour frame buffer device 144x54
[ 1.972261] fb0: VESA VGA frame buffer device
[ 1.972328] GHES: HEST is not enabled!
[ 1.972535] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.973720] Linux agpgart interface v0.103
[ 1.973797] rtc_cmos 00:02: RTC can wake from S4
[ 1.973936] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.973964] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.973983] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.974434] TCP: cubic registered
[ 1.974593] NET: Registered protocol family 10
[ 1.975020] NET: Registered protocol family 17
[ 1.975476] Loading compiled-in X.509 certificates
[ 1.975502] registered taskstats version 1
[ 1.976231] Magic number: 3:326:848
[ 1.976341] rtc_cmos 00:02: setting system clock to 2015-02-22 18:50:54 UTC (1424631054)
[ 1.976444] PM: Hibernation image not present or could not be loaded.
[ 1.977023] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 1.977027] Write protecting the kernel read-only data: 8192k
[ 1.977495] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 1.977718] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 1.979659] random: systemd urandom read with 1 bits of entropy available
[ 1.980307] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.980576] systemd[1]: Detected architecture 'x86-64'.
[ 1.980581] systemd[1]: Running in initial RAM disk.
[ 1.980590] systemd[1]: Running with unpopulated /etc.
[ 1.980603] systemd[1]: No hostname configured.
[ 1.980609] systemd[1]: Set hostname to <localhost>.
[ 1.980655] systemd[1]: Initializing machine ID from random generator.
[ 1.996373] systemd[1]: Populated /etc with preset unit settings.
[ 1.999327] systemd[1]: Unit type .busname is not supported on this system.
[ 2.003390] systemd[1]: Created slice -.slice.
[ 2.003412] systemd[1]: Starting -.slice.
[ 2.005054] systemd[1]: Listening on Journal Audit Socket.
[ 2.005188] systemd[1]: Created slice system.slice.
[ 2.005200] systemd[1]: Starting system.slice.
[ 2.005218] systemd[1]: Reached target Swap.
[ 2.005226] systemd[1]: Starting Swap.
[ 2.005288] systemd[1]: Listening on udev Control Socket.
[ 2.005296] systemd[1]: Starting udev Control Socket.
[ 2.005312] systemd[1]: Reached target Slices.
[ 2.005320] systemd[1]: Starting Slices.
[ 2.005335] systemd[1]: Reached target Local File Systems.
[ 2.005342] systemd[1]: Starting Local File Systems.
[ 2.005358] systemd[1]: Reached target Timers.
[ 2.005366] systemd[1]: Starting Timers.
[ 2.005398] systemd[1]: Listening on udev Kernel Socket.
[ 2.005409] systemd[1]: Starting udev Kernel Socket.
[ 2.005430] systemd[1]: Reached target Paths.
[ 2.005441] systemd[1]: Starting Paths.
[ 2.005497] systemd[1]: Listening on Journal Socket.
[ 2.005510] systemd[1]: Starting Journal Socket.
[ 2.006097] systemd[1]: Starting udev Coldplug all Devices...
[ 2.006689] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.006801] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.006811] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 2.006860] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.006870] systemd[1]: Starting Journal Socket (/dev/log).
[ 2.007428] systemd[1]: Starting Journal Service...
[ 2.007472] systemd[1]: Reached target Sockets.
[ 2.007494] systemd[1]: Starting Sockets.
[ 2.011399] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 2.012026] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.012842] systemd-journald[63]: Failed to set file attributes: Inappropriate ioctl for device
[ 2.016230] systemd[1]: Started Create Static Device Nodes in /dev.
[ 2.016999] systemd[1]: Starting udev Kernel Device Manager...
[ 2.021212] systemd[1]: Started udev Kernel Device Manager.
[ 2.024169] systemd[1]: Started udev Coldplug all Devices.
[ 2.029792] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.032026] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.032044] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.041719] SCSI subsystem initialized
[ 2.042505] ACPI: bus type USB registered
[ 2.042538] usbcore: registered new interface driver usbfs
[ 2.042552] usbcore: registered new interface driver hub
[ 2.042588] usbcore: registered new device driver usb
[ 2.044174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.045154] systemd[1]: Started Journal Service.
[ 2.045633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.045840] ohci-pci: OHCI PCI platform driver
[ 2.045993] QUIRK: Enable AMD PLL fix
[ 2.046022] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.046033] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 2.046079] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
[ 2.046697] ehci-pci: EHCI PCI platform driver
[ 2.047833] libata version 3.00 loaded.
[ 2.084196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.102273] hub 1-0:1.0: USB hub found
[ 2.102287] hub 1-0:1.0: 5 ports detected
[ 2.102593] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.102600] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.102631] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
[ 2.159071] hub 2-0:1.0: USB hub found
[ 2.159085] hub 2-0:1.0: 5 ports detected
[ 2.160195] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.160202] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 3
[ 2.160235] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
[ 2.215699] hub 3-0:1.0: USB hub found
[ 2.215713] hub 3-0:1.0: 4 ports detected
[ 2.271489] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.271502] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
[ 2.271509] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.271523] ehci-pci 0000:00:12.2: debug port 1
[ 2.271574] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
[ 2.281276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.281694] hub 4-0:1.0: USB hub found
[ 2.281705] hub 4-0:1.0: 5 ports detected
[ 2.338086] hub 1-0:1.0: USB hub found
[ 2.338100] hub 1-0:1.0: 5 ports detected
[ 2.338571] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.338579] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
[ 2.338584] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.338596] ehci-pci 0000:00:13.2: debug port 1
[ 2.338634] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
[ 2.347963] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.348396] hub 5-0:1.0: USB hub found
[ 2.348414] hub 5-0:1.0: 5 ports detected
[ 2.404806] hub 2-0:1.0: USB hub found
[ 2.404820] hub 2-0:1.0: 5 ports detected
[ 2.461536] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.461550] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
[ 2.461557] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.461571] ehci-pci 0000:00:16.2: debug port 1
[ 2.461611] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
[ 2.471331] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.471768] hub 6-0:1.0: USB hub found
[ 2.471780] hub 6-0:1.0: 4 ports detected
[ 2.528139] hub 3-0:1.0: USB hub found
[ 2.528154] hub 3-0:1.0: 4 ports detected
[ 2.528415] ahci 0000:00:11.0: version 3.0
[ 2.528689] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.528693] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 2.529180] scsi host0: ahci
[ 2.529664] scsi host1: ahci
[ 2.529777] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 28
[ 2.529781] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 28
[ 2.530551] scsi host2: pata_atiixp
[ 2.530815] scsi host3: pata_atiixp
[ 2.530912] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 2.530914] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 2.654798] usb 5-4: new high-speed USB device number 2 using ehci-pci
[ 2.934859] tsc: Refined TSC clocksource calibration: 1397.458 MHz
[ 3.014908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.014947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.016183] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60B, max UDMA/133
[ 3.016190] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.016972] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TF01, max UDMA/100
[ 3.017307] ata1.00: configured for UDMA/133
[ 3.017807] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54755 A60B PQ: 0 ANSI: 5
[ 3.019278] ata2.00: configured for UDMA/100
[ 3.025787] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TF01 PQ: 0 ANSI: 5
[ 3.044649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.044654] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.044859] sd 0:0:0:0: [sda] Write Protect is off
[ 3.044865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.044918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.061859] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.061874] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.062232] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.084075] sda: sda1 sda2 sda3
[ 3.085567] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.414041] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3.528901] XFS (sda1): Mounting V4 Filesystem
[ 3.710527] XFS (sda1): Ending clean mount
[ 3.935255] Switched to clocksource tsc
[ 3.999076] systemd-journald[63]: Received SIGTERM from PID 1 (systemd).
[ 4.799287] random: nonblocking pool is initialized
[ 6.377516] systemd-journald[187]: Failed to set file attributes: Inappropriate ioctl for device
[ 7.417234] ACPI: acpi_idle registered with cpuidle
[ 7.464892] acpi-cpufreq: overriding BIOS provided _PSD data
[ 7.544509] wmi: Mapper loaded
[ 7.612504] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 7.626522] acpi device:2b: registered as cooling_device4
[ 7.626631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
[ 7.700708] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SMBX) (20141107/utaddress-258)
[ 7.700729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 7.737166] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.737173] ACPI: Thermal Zone [THRM] (50 C)
[ 7.746486] ACPI: Lid Switch [LID]
[ 7.746714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 7.746725] ACPI: Power Button [SLPB]
[ 7.746874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.746880] ACPI: Power Button [PWRF]
[ 7.749494] ACPI: Battery Slot [BAT0] (battery present)
[ 7.749951] ACPI: AC Adapter [AC0] (on-line)
[ 7.755509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.961538] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.061752] [drm] Initialized drm 1.1.0 20060810
[ 8.296521] cfg80211: Calling CRDA to update world regulatory domain
[ 8.319199] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.319231] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.320035] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000032000, 38:60:77:69:8f:16, XID 00a00000 IRQ 29
[ 8.363138] kvm: Nested Virtualization enabled
[ 8.363151] kvm: Nested Paging enabled
[ 8.704039] [drm] radeon kernel modesetting enabled.
[ 8.794078] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 8.832358] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 8.832364] AMD IOMMUv2 functionality not available on this system
[ 8.959092] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 8.961187] snd_hda_codec_hdmi: unknown parameter 'index' ignored
[ 8.965010] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
[ 9.031523] media: Linux media interface: v0.10
[ 9.102014] CRAT table not found
[ 9.102024] Finished initializing topology ret=0
[ 9.102177] kfd kfd: Initialized module
[ 9.102941] checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
[ 9.102951] fb: switching to radeondrmfb from VESA VGA
[ 9.103002] Console: switching to colour dummy device 80x25
[ 9.104030] [drm] initializing kernel modesetting (SUMO 0x1002:0x9647 0x1179:0xFC62).
[ 9.104059] [drm] register mmio base: 0xFEB00000
[ 9.104063] [drm] register mmio size: 262144
[ 9.104144] ATOM BIOS: Toshiba
[ 9.104219] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 9.104227] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 9.104231] [drm] Detected VRAM RAM=512M, BAR=256M
[ 9.104235] [drm] RAM width 32bits DDR
[ 9.104379] [TTM] Zone kernel: Available graphics memory: 3821360 kiB
[ 9.104390] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 9.104394] [TTM] Initializing pool allocator
[ 9.104407] [TTM] Initializing DMA pool allocator
[ 9.104455] [drm] radeon: 512M of VRAM memory ready
[ 9.104459] [drm] radeon: 1024M of GTT memory ready.
[ 9.104497] [drm] Loading SUMO Microcode
[ 9.124664] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
[ 9.124685] psmouse serio1: synaptics: Toshiba Satellite L775D detected, limiting rate to 40pps.
[ 9.160285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 9.170455] Linux video capture interface: v2.00
[ 9.179293] mousedev: PS/2 mouse device common for all mice
[ 9.223473] [drm] Internal thermal controller without fan control
[ 9.223622] [drm] Found smc ucode version: 0x00011200
[ 9.223730] [drm] radeon: dpm initialized
[ 9.266919] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 9.282200] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 9.282345] radeon 0000:00:01.0: WB enabled
[ 9.282349] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b70ac00
[ 9.282351] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b70ac0c
[ 9.283078] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
[ 9.283081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.283082] [drm] Driver supports precise vblank timestamp query.
[ 9.283084] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 9.283121] radeon 0000:00:01.0: radeon: using MSI.
[ 9.283145] [drm] radeon: irq initialized.
[ 9.298245] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.298931] rtlwifi: rtlwifi: wireless switch is on
[ 9.299718] [drm] ring test on 0 succeeded in 1 usecs
[ 9.299728] [drm] ring test on 3 succeeded in 3 usecs
[ 9.307045] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.307049] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.307053] sound hdaudioC0D2: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.307055] sound hdaudioC0D2: mono: mono_out=0x0
[ 9.307058] sound hdaudioC0D2: inputs:
[ 9.307061] sound hdaudioC0D2: Mic=0x18
[ 9.307065] sound hdaudioC0D2: Internal Mic=0x12
[ 9.315899] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D2/input9
[ 9.316387] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 9.316507] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 9.349814] [drm] ring test on 5 succeeded in 1 usecs
[ 9.369840] [drm] UVD initialized successfully.
[ 9.370279] [drm] ib test on ring 0 succeeded in 0 usecs
[ 9.370314] [drm] ib test on ring 3 succeeded in 0 usecs
[ 9.524205] rtl8192ce 0000:04:00.0 wlp4s0: renamed from wlan0
[ 9.769931] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - MP (04f2:b289)
[ 9.788893] input: TOSHIBA Web Camera - MP as /devices/pci0000:00/0000:00:13.2/usb5/5-4/5-4:1.0/input/input12
[ 9.789309] usbcore: registered new interface driver uvcvideo
[ 9.789319] USB Video Class driver (1.1.1)
[ 9.871399] cfg80211: World regulatory domain updated:
[ 9.871412] cfg80211: DFS Master region: unset
[ 9.871417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.871425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871431] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871441] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.871447] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 9.871453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.871457] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871463] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 9.890507] [drm] ib test on ring 5 succeeded
[ 9.911771] [drm] radeon atom DIG backlight initialized
[ 9.911776] [drm] Radeon Display Connectors
[ 9.911777] [drm] Connector 0:
[ 9.911779] [drm] VGA-1
[ 9.911780] [drm] HPD2
[ 9.911782] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 9.911783] [drm] Encoders:
[ 9.911784] [drm] CRT1: INTERNAL_UNIPHY2
[ 9.911786] [drm] CRT1: NUTMEG
[ 9.911787] [drm] Connector 1:
[ 9.911788] [drm] LVDS-1
[ 9.911789] [drm] HPD1
[ 9.911790] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 9.911791] [drm] Encoders:
[ 9.911792] [drm] LCD1: INTERNAL_UNIPHY2
[ 9.911793] [drm] LCD1: TRAVIS
[ 9.911794] [drm] Connector 2:
[ 9.911795] [drm] HDMI-A-1
[ 9.911796] [drm] HPD5
[ 9.911798] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 9.911799] [drm] Encoders:
[ 9.911800] [drm] DFP1: INTERNAL_UNIPHY1
[ 10.016569] [drm] fb mappable at 0xC0478000
[ 10.016576] [drm] vram apper at 0xC0000000
[ 10.016578] [drm] size 5787648
[ 10.016580] [drm] fb depth is 24
[ 10.016582] [drm] pitch is 6400
[ 10.016970] fbcon: radeondrmfb (fb0) is primary device
[ 10.078763] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
[ 10.143532] Console: switching to colour frame buffer device 200x56
[ 10.150308] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 10.150312] radeon 0000:00:01.0: registered panic notifier
[ 10.164191] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
[ 10.194853] cfg80211: Calling CRDA for country: US
[ 10.231380] cfg80211: Regulatory domain changed to country: US
[ 10.231393] cfg80211: DFS Master region: FCC
[ 10.231397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.231406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.231413] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 10.231419] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 10.231425] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 10.231429] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
[ 10.231434] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.231439] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 10.422003] XFS (sda3): Mounting V5 Filesystem
[ 10.837256] XFS (sda3): Ending clean mount
[ 10.899226] systemd-journald[187]: Received request to flush runtime journal from PID 1
[ 11.195453] microcode: CPU0: new patch_level=0x03000027
[ 11.195496] microcode: CPU1: new patch_level=0x03000027
[ 11.195601] microcode: CPU2: new patch_level=0x03000027
[ 11.195693] microcode: CPU3: new patch_level=0x03000027
[ 12.465476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 13.726328] wlp4s0: authenticate with 00:1e:2a:6f:46:f8
[ 13.745730] wlp4s0: send auth to 00:1e:2a:6f:46:f8 (try 1/3)
[ 13.753012] wlp4s0: authenticated
[ 13.755130] wlp4s0: associate with 00:1e:2a:6f:46:f8 (try 1/3)
[ 13.758031] wlp4s0: RX AssocResp from 00:1e:2a:6f:46:f8 (capab=0x411 status=0 aid=3)
[ 13.758283] wlp4s0: associated
[ 13.758302] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 23.961417] PM: Syncing filesystems ... done.
[ 24.305227] PM: Preparing system for mem sleep
[ 24.310243] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 24.311535] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 24.311542] PM: Entering mem sleep
[ 24.311898] Suspending console(s) (use no_console_suspend to debug)
[ 24.320753] wlp4s0: deauthenticating fSuspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
Try a different graphics driver
Tweak the driver module parameters or build your own driver.
Unfortunately I don't have experience with the radeon driver, so I can only give you ideas. -
[Help]iPhone 5s screen won't turn on / won't play sounds
Hello, my name is Bryan.
I've got a problem with my iPhone 5s. I opened my iPhone to fix an issue with the home button (Watched a guide on youtube on how to achieve this), and I connected everything as it is supposed to go, my home button is working but now my screen won't turn on or the phone won't play any sounds. I know the phone it's on because I can connect it to the computer and the computer recognizes it. Also, I tried calling it, and it rings on the phone I am calling from, but my iPhone simply won't play any sounds...
I am also sure the phone is not in DFU mode.
Any help?
Thanks in advance,
- BryanIt won't even vibrate or do anything, but it's on.
-
So today my iPhone decides to go into recovery mode on me randomly so I plugged it into my Macbook right away, but it wasn't showing up in iTunes so I did a quick internet search as to why that could be. On the Mac support forum I found instructions stating I should make sure I had the current verison of iTunes on my computer, turns out I had been putting off an Update because I didn't like waiting for it to restart n so forth. So I clicked my boucning update friend at the bottom of my screen and it started checking for updates, the bar got maybe a quarter of the way up and then stopped moving all together, I thought something was wrong so I clicked cancel and tried again. The same thing happened so I clicked cancel and went back to the Internet to find more help on my problems. I found yet another forum saying this solution was simple, restart the computer. So i clicked my little apple at the top and pressed restart and that has been the last thing I got to do on my computer because when it restarted it got past the White Apple logo screen and went on to a Blue screen which quickly turned a darker shade and had the loading circle, then back to the previous blue screen, then right back to the darker one. This process it repeated several times and I can't for the life of me figure out what to do. Please someone have a simple answer to this that I haven't Already tried, I have already tried safe mode and it just doesn't work for me. Please please help I need my computer for class it has all my notes and a paper I was doing, not to mention my iphone is still in recovery mode, even when I can get to another computer to fix that I need all the back up files off of my macbook to restore it to what I know it as and not default.
Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data) -
My MacBook Pro screen doesn't turn on when I the open lid.
So I bought my 13inch MacBook Pro Retina two weeks ago. 70% of the time when opening the lid the screen will not turn on but my keyboard backlight will. I then have to either close the lid and open again or press the power to put the system to sleep and wake again. It seems the system is working fine just not the screen.
I have tried the SMC and PRAM reset which seemed to work for half of the day, now the problem is back.
Has anybody got a solution for this or are in fact experiencing the same problem?
ThanksYou've 90 days of free phone support from date of purchase and - at least - a one year warranty on the computer (free phone support and warranty for three years if you purchased AppleCare). The behavior that you're experiencing is not normal - if I were you, I would get on the phone to Apple and have them make you a 'genius bar' appointment.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.3, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display
Maybe you are looking for
-
HP LaserJet M1536dnf won't fax or copy from Automatic Document Feeder.
HP LaserJet M1536dnf - Put a fax to send in the ADF. Display shows "Document Loaded" Enter Phone # to send fax. Press "Start Fax". ADF feeds fax through the scanner and display shows "Storing Fax: Page 1". After page is scanned display changes to
-
Change partner function data in PO using EXIT_SAPMM06E_013(MM06E005)
Hi all, I have an issue related to partner functions while creating purchase order.In the user exit MM06E005, we have EXIT_SAPMM06E_013 which is triggered when PO is created from Preq using tcode ME59. There is a table XEKPA in the fn mod EXIT_SAPMM0
-
Hello there, I have Adobe Photoshop Elements 9 on disk but my new computer has no disk drive. Its a Macbook pro os x 10.9.5. I bought th e Photoshop elements from a shop so i have the original set up disk and serial code. Is it possible to download i
-
HT201260 How old is my mac book pro?
f
-
How can we use meta chain in process chains
hi friends, anyone tell me about meta chain in process chains and give me one example. thanks, sree Please search the forum Edited by: Pravender on Jun 28, 2010 8:04 PM