Screen/fonts blurry after VDA use

After a presentation with my Mac connected to a VGA this morning, I suddenly have a totally screwed up screen. It looks blurry and unclear, as if someone covered it with a transparent sheet. I tried to adjust some things in System Preferences, but neither the fonts smoother nor a higher resolution do the trick. Can anyone help me?

1280x800 is the correct resolution. If that is what is selected in the Displays panel and it appears that your image is undistorted and fills the entire active area of your display then you should be back to normal. Note, there will still be a black border around the active LCD image but if you look carefully or examine the display when your MacBook is turned off you should be able to tell the difference between the black border and the actual image area on the LCD.
You may also want to make certain that you have the correct color profile selected for the internal LCD display (check the "Color" tab in the Displays panel).

Similar Messages

Iphone 4 screen went blurry after lcd replacement.

On my iphone 4, Lcd was broken, I bought a new lcd and tried to change myself, but when i am done everything, my iphone 4 screen went blurry with many different colourful lines, and finally screen stays white, i can't use it at all. How can i fix it? BTW when i tried to fix it using itunes my phone keeps rebooting so Itunes couldn't fix it, so i sense there is problem on hardware still. Thanks in advance.

There is no software fix for a hardware problem. This is most definitely a hardware problem. Your best bets are either send it out to someone who does professional iPhone repairs or buy a new phone.

IPhone 3GS works fine, unless I the screen goes black after no use. Then I'm stuck on the white screen until I reset the phone.

The title kind of sums it up. After having my 3GS for over a year without issue, it started acting up today. I had my phone on my desk at work, and had been checking my e-mail, news, and web intermittently throughout the morning. I set the phone down, in it's typical spot without issue. No dropping, no hits, no...nothing. Just set it on the desk and go about my work.
The next time I pick up the phone to use it, and hit the button, I'm greeted with an all-white screen. WTH? If I press and hold the home button the phone makes a "dunk" soud, like maybe I'm enabling the voice feature. Long story short, I can restart the phone, and reset the phone, and it's fine.
UNTIL the screen goes dark from inactivity. From that point on, it will ONLY come back in the full-white-screen mode UNTIL I reboot it again, in which case it's again functioning normally...UNTIL the screen goes black from inactivity. I can hear the phone make text-alert noises as texts come in, my e-mail continues to download regularly, etc. But it stays stuck in this white screen anytime the battery saver turns the screen black.
Any ideas on this?

So, I've received and installed a replacement digitizer screen / component. The good news is that the digitizer works just fine! Screen swipes, finger tracking, etc are all great.
The bad news...is that it didn't fix my white screen issue. Same symptoms...everything works fine at boot. As long as I keep the screen from going dark, everything continues to work fine (rapidly consuming battery, of course). If, at any time, the screen goes dark (get a call, accidentally press the top button to shut down the screen, etc), the screen will only come back on as a white screen.
All touch components are working fine at this time. I've grown to remember where the "power down" swipe is located, so I press and hold the power down button, then swipe where I know the "power down" swipe is located. Phone will shut down.
Restart the phone, and repeat the process. Anyone have any other ideas?

Screen Capture Blurry After Transcode

This is probably a dumb question because I am not usually the one working with video, but I really need help! I am doing a demonstration on my computer and I need to make it into a DVD. I used Windows Media Encoder 3 to capture my screen and then save it as a wmv. This file looks fine. I edited the video in Premier CS4 and it still looks fine. But when I try making the Premier file into a DVD using Encore, it makes the quality look horrible. Pictures become really pixelated, and text just becomes big blobs. I tried to transcode using the highest setting, but this did not help. Is there something else I can do? Thanks for any help!

First, the screen capture to WMV will heavily compress the footage. WMV is a streaming media, delivery-only format, and is not meant to be edited - strike one. Now, PrPro, while it will Import WMV, will have to basically convert it to DV-AVI to allow for Frame-level editing. DV-AVI conversion, even at an internal basis, does a little bit of compression. Though nothing like the quality hit just going to WMV, there is a tiny hit there is some - strike 2 (well, probably really strike 1.25...). Then, you need to get to MPEG-2 for the DVD. That is another heavily compressed format. When starting with a DV-AVI, it does a nice job. When you start with a WMV, to though the process of converting it back to I-frame footage to edit, and then compress the heck out of it again - strike 3. This does not make THAT much difference whether you do the MPEG-2 conversion (Transcoding) in Encore, or from PrPro. The key word is "much." You might want to experiment with using a standalone encoder to create your MPEG-2, rather than either Encore, or PrPro. Some are better. The ones used by Hollywood with 10-pass encoding run into the tens, if not hundreds, of thousands of dollars, and are run by experts, who do nothing else all day, 5 days per week. Besides going to a stand-alone encoder, you will need to bit-budget to find out how much material vs the bit-rate, will fit your disc.
The better workflow would be to NOT use WMV, but instead an I-frame format/CODEC in the first place. DV-AVI (though slightly compressed) would be an ideal choice. Then, the ultimate quality to MPEG-2 would be to Export from PrPro is something like the Lagarith Lossless CODEC, and use a stand-alone encoder and bit-budgeting to get the ultimate 100% DVD-compliant MPEG-2. That would be Imported into Encore, and if not detected automatically should be set to Do Not Transcode.
Hope that this explains where the quality is going, and provides a workflow that would cut the losses.
Hunt

Lock screen sounds muted after Siri use?

Hey!
I just discovered a weird thing that happens on the lock screen. I tested this on an iPhone 4S, iPod touch 5th gen and iPad 3rd gen, all giving the same results.
So here's the trick:
- Wake up device, then hold down home button to activate Siri
- Tap outside Siri area to close Siri
- Now, when you unlock your device, even with a passcode, the unlocking sounds won't sound. You can lock and unlock your device about 3-4 times after that and there will still be no sound. After a few goes, the sound suddenly returns.
It's just a little glitch I found. Help? Or tell Apple?

Yeah it does! Maybe you're not on iOS 6.1.3. I've also found it happens if you're typing, say in notes. The keyboard clicks don't sound, but eventually come back.
Are you speaking to Siri? Just activate it and tap out of it (not with home button) without saying anything.

Screen becomes blurry (font change) after java starts?

Using java 5.0xx, when any java application starts, it chagnes my screen font. and as a result the text becomes blurry, its almost like its using truetyoe fonts. Is there any reason for this, or to prevent this?

Thanks for the reply..
I used your tool and it seems my jnlp file is ok ..(nothing in red)
I have actually identified the problem and it seems after update to java 6 update 14.. I am not able to access any resources
Here the function that reads a .csv file
private int readStateMapData(String theAbName) {
.............................//lines deleted
lineBuf = "stateCodes.csv";
dPanel.showStatus("Reading state code information...", null);
lineBuf = "map-data/" + lineBuf;
try {
URL url = new URL(getCodeBase(), lineBuf);
BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream()));
stateID = null;
while ((lineBuf = in.readLine()) != null) {
StringTokenizer st = new StringTokenizer(lineBuf);
String ID = st.nextToken();
String name = st.nextToken();
if (name.equals(theAbName)) { stateID = ID; break; }
in.close();
if (stateID == null) return STATE_NOT_FOUND;
} catch (MalformedURLException me) { return BAD_STATECODE_FILE; }
catch (IOException ie) { return BAD_STATECODE_FILE; }
I already have a logic built into my program that displays and error message and it shows "cannot read state code file"
These files are inside my jar. Again if I uninstall java 6 update 14 webstart works fine ..What should I do ??
Here is my jnlp file :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="file:/G:/WNV_proj/dist/" href="launch.jnlp">
<information>
<title>XXXXXXXXXXX</title>
<vendor>XXXXXXXXX</vendor>
<description>MICRO-MAPS</description>
<description kind="short">MICRO-MAPS</description>
<offline-allowed/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+" href="http://java.sun.com/products/autodl/j2se" java-vm-args="-Djava.security.policy=applet.policy"/>
<jar href="MICRO-MAPS.jar" main="true" download="lazy"/>
</resources>
<applet-desc main-class="Micromaps" name="Micromaps" width="940" height="640">
</applet-desc>
</jnlp>
Edited by: atjava on Jul 15, 2009 12:26 PM

Screen Resolution Troubles After Using HDMI and Converter

After using a StarTech HDMI converter to watch Netflix on my television, the resolution on my macbook pro is messed up. If I close Netflix the resolution returns, but after trying to use other programs like iPhoto and iMovie I ran into the same problem. As soon as I open those apps the resolution gets distorted and the screen is blurry. Like with Netflix, as soon as I close those apps the screen resolution returns to normal. Also every time I connect the converter and HDMI cord from my Macbook Pro to my television the resolution goes blurry, but the resolution is perfect on the television.

After using a StarTech HDMI converter to watch Netflix on my television, the resolution on my macbook pro is messed up. If I close Netflix the resolution returns, but after trying to use other programs like iPhoto and iMovie I ran into the same problem. As soon as I open those apps the resolution gets distorted and the screen is blurry. Like with Netflix, as soon as I close those apps the screen resolution returns to normal. Also every time I connect the converter and HDMI cord from my Macbook Pro to my television the resolution goes blurry, but the resolution is perfect on the television.

Screen recording becomes blurry after exporting to iMovie

After creating a screen recording using Quicktime (and the video is perfectly clear), I am trying to export to iMovie to edit the video more easily and to add an audio track. However, once the video is turned into an iMovie project, it is blurry. Still blurry after stabilization too. Please help!

After creating a screen recording using Quicktime (and the video is perfectly clear), I am trying to export to iMovie to edit the video more easily and to add an audio track. However, once the video is turned into an iMovie project, it is blurry. Still blurry after stabilization too.
Is this a minimum information guessing game? Is this a "full" or "partial" screen recording? What are the actual dimensions of the screen capture? Was the capture made using QT or a third-party app? Did you perform a manual or automatic "export" or simply import the screen capture file to iMovie? In what type iMovie project are you editing the exported or imported screen captured file? Why are you stabilizing a screen recording? (I.e., the stabilization routine further rescales the content.)
If I were merely to make a guess, It would be that your work flow is rescaling the content making it blurry in iMovie as compared to the original capture file.

After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you

Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,it wouldn't need to ask t

Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".

Hello,
sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
There may be several reasons that can cause Aperture to crash on start up:
You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
Your Aperture Library or Preferences may have been corrupted
Or you are having a system wide problem with your machine.
Or you may simple be running out of disk space.
It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
Regards
Léonie
Don't you think your user name is a little bit tactless in an Apple provided forum?

Elements 10, windows 8, 64 bit, epson artisan 835 printer: prints are really dark even after using enhancements like adjusting lighting. Prints are darker than photoshop edit screen. Prints are acceptable using paint, windows photo viewer, or gallery.

Elements 10, Windows 8, 64 bit, Epson Artisan 835 printer: Prints are really dark even after applying enhancements, like adjusting lighting. Prints are darker than Photoshop Edit Screen. Prints are acceptable using Paint, Windows Photoviewer, or Photo Gallery.

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after pri

How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after printing. There is a trick in saving PDF.

Hi el_giclee,
Important to note from the beginning is that when you create your Photoshop document make sure you chose 300 Pixels/inch as your resolution.
I'm interested in seeing your Save Adobe PDF dialog box after you choose to save the PDF.
Could you post a screenshot of this dialog box with the Compression menu selected on the left side?
It's a good idea to select High Quality Print or Press Quality in the Adobe PDF Preset menu at the top of this box. It will automatically select the best default settings for a printed piece.
Michael

How do you set the amount of time the screen stays lite after your last use?

How do you set the amount of time the screen stays lite after your last use?

Settings>General>Auto-Lock.

When using adobe flash player, for example, in the game. Screen will fade after a few seconds of inactivity.

Hi, i have windows 7 hp, sp1. When using adobe flash player, for example, in the game. Screen will fade after a few seconds of inactivity. But the pixels on are highlighted. This is accomplished by installing the latest update flash.If I move the mouse the screen returns. Screen goes from one second to several, and sometimes not at all. Pleas help me

To give you any useful advice, I'm going to need to know more about your computer and browser:
https://forums.adobe.com/thread/1195540

Hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

Screen/fonts blurry after VDA use

Similar Messages

Maybe you are looking for