Screen freeses on startup and activity bar at botom of page just goes to 10% then shuts down
Screen freezes on start up and crashes after activity bar on bottom of screen just reaches about 10%
Tried restart with control bar held problem seemed to be after trying to update osx and error was displayed
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
Similar Messages
-
IOS 6 update - status bar goes a bit, then shuts down and its hot
Updating to IOS 6. I am at the point where I see a black screen with a white apple and a status bar under the apple. The status bar barely moves but it is currently at about 35%. After a bit, it goes blank and then it resumes the same process.
I have it plugged into my PC so it has power.
Is this normal? It's been happening for about 20 minutes now. Plus I can probably turn my heater off since the iPhone seems to be providing me warmth. Is it supposed to get hot during an update?
How long before I cancel the IOS update and probably my Verizon contract for this phone and any/everything to do with Apple products?Just needed to wait for it to get done. Apparently, that is how long an update happens
Anyway, issue resolved. -
my macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that
Mac OS X: Gray screen appears during startup - Apple Support
-
Hi my iMAc 27 inch starts up to the grey screen with apple logo and loading bar underneath it loads halfway then freezes up and shut down after a while please help
Try the tips listed here Mac OS X: Gray screen appears during startup - Apple Support
-
I get a white screen with apple logo and progress bar on my imac mavericks
I get a white screen with apple logo and progress bar ,then computer shuts down
when I turn my imac back on same thing happens,every time same thing
pprogress bar only goes half way then computer shut down
is there a solution ?
if not is there a way to at least salvage some files and docs?
i Have the latest imac 27Thanks I tried it but after I repaired my disk via disk utility at start up, it told me that
my disk can't be repaired and to try to back up my files so I can format it
but is there to back up my files?
also what I get is white screen with the progress bar not grey -
I tried to download IOS 7.1.2 but my phone has been frozen on a screen with an apple and a bar that hasn't progressed for 11 hours I have an Iphone 5S
Hold down the home button and the power button for about 25 seconds or until you see the apple logo. Thats a hard reset and it should restart the phone and bring it back to the slide to unlock.
-
Stuck on start up screen, little wheel turning and progress bar hasn't move
Help
Thank you!Useful article here on the causes of the Spinning Beach Ball and how to troubleshoot it:
http://www.computerworld.com/s/article/9177479/Troubleshoot_the_spinning_beach_b all?taxonomyId=89&pageNumber=1
and also this:
http://www.thexlab.com/faqs/sbbod.html -
MacBook will turn on to white screen with gray apple and loading bar, will load very little and then turn off. What do I do?
Bescobar23,
which model MacBook do you have, and which version of OS X is installed on it? -
I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.
A Safe Mode boot might help ..
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
See if the problem persists. -
Progress bar at startup, then shuts down immediately, during progress bar
It started when my iMac started running a little slower then usual, so i decided to restart it just incase something wasnt working properly,
then when the startup apple came up a grey progress bar comes up underneath, loads to approximately 15% then restarts the progress bar,
and then the whole system shuts down.
Any ideas on what to do? Or just get apple to check it out?WorriedUser wrote:
Yes, i already read this, but the problem is, it wont turn on at all, it gets to the startup then shuts down after the progress bar is no more then 10-15%
OK, then it's time to take it in to have it serviced at an Apple Store or AASP. -
Older model iMac. Grey screen, no tones, apple logo and spinner, then shuts down. Tried all greyscreen tips on Apple Website. Do not have start up disc. Do not know what OS it runs. Suggestions?
Since you don't have a startup disc you haven't done ALL of the tips on this page http://support.apple.com/kb/TS2570
I don't know what you've done but you need to follow the tips listed and that could include possibly erasing and reinstalling the OS. Older model iMac does nothing to help us understand what you're working with. You can call Apple and provide them with your serial number and for a fee they'll ship you a set of original install discs or you could possibly use Snow Leopard which you can get for $20 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
You can enter the serial number here for specs on the iMac http://www.everymac.com
And if you don't know where to find the serial number see here http://support.apple.com/kb/HT1349 -
My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...
There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote. -
The screen of my iphone turned to blue and then shutted down. And it couldn't power on for few days.
Try this First... No Data will be Lost..
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
More > Frozen or unresponsive iPhone -
When I start my macbook I get the gray screen and gear. I've tried to safe start it and it sounds like it's going to start but then shuts down. I don't have any other products connected to it. Any suggestions?
Did you recently install any updates?
Do you have your original install discs?
~Lyssa -
HP Pavilion a6110n Startup Problems, Fan Runs Full Tilt and then Shuts Down
We are currently running into an issue where our computer, when we try to power it on, turns on briefly with the fan running at full tilt. After a few seconds, the computer then shuts down and everything turns off. When the monitor is connected, we never do see anything show up there. We opened up the case and cleaned out the fan and the cooling unit completely, and then we even completely removed and then reconnected the unit. Still, the computer continues to do the same thing. Does this sound like a bad sensor? Like the computer thinks it is overheating and just shuts itself down?
Thanks for any help. We tried some of the advice we found on here, like stated above, and seem to have run out of options.Hi Big_Mike_180,
It is the same for the desktop or notebook. The one blink means that you are having an issue with the CPU, unfortunately. At this point if you are in warranty give HP Total Care a call at 1-800-474-6836 in North America or visit the link below if you are outside North America.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Or take it to a local tech to check the CPU.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP
Maybe you are looking for
-
Homesharing from old PC to new Mac is not working.
I turned on homesharing on both devices and tried to share the library from the old pc to the new macbook, but my macbook still says i have no music and there is no longer a homesharing button available. Please help!
-
RFC_ERROR_SYSTEM_FAILURE error while updating the sick leave in MSS
Hi Guru , We are getting RFC_ERROR_SYSTEM_FAILURE error while updating the Sick leave for team member from portal . Please tell how to resolve this . Dump part : Runtime Errors MESSAGE_TYPE_X Error analysis Short text of error message:
-
im only looking to do it with single images maybe a caption , but wothout having to have teh area where the dots/nubers / sliders go if i just drop an image son it doesnt seem to offer trhe fullscreen option any ideas? arby
-
DTW - Business Partner Master Data
Hello, i'am having some problem concern to import of marter data of BP, in OCPR - ContactEmployees and CRD1 - BPAddresses. I'am using ODBC and using the query structure like in the .scv files. I do the import and DTW don't give error message and do
-
DataGrid when set variableRowHeight=true, the Image in the itemRenderer can't show up
http://livedocs.adobe.com/flex/201/html/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Live Docs_Book_Parts&file=cellrenderer_072_28.html the above is the flex example. I did my code almost same as this example. But I do different way in renderer code