Screen freeze
starting my satellite M115-S1061. I get a back screen with Press F2 for system utilities or F12 for Boot Menu. with a blue bar to the right of this. This bar loads about half way and stops there, no keys are usable and cursor. It just stays like this. It had be working perfectly before this on a reboot.
thanks
My P305d s8903 that I just got two days does a similar thing. The screen freezes black when I close it and then open it a while later. It will not "wake up" even if I hit the enter key or alt/ctrl/del. I have to remove the battery to reset it. Can't be healthy for the unit. And i'm a little disappointed with this - since I've only had it a few days.
Have you heard anything from Toshiba about a fix for this?
Similar Messages
-
Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; I get the "end program" message and have to say "end now"it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?
- I've used Firefox exclusively for around 2 years.
- My outlook express has no problems
- other programs seem unaffected; it seems peculiar to Firefox.
- my main use is surfing the net, primarily entering competitions on line via specialist competition sites.
- every day at some stage(s) I have to switch computer off as Firefox has got very slow/sticky/freezes.
I'm not techy by any means, but I can only thing of un- and re-installing to hopefully start with a clean slate.Sounds like something is keeping Firefox from closing properly. See this: <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit -
Until recently, I loved Firefox. Lately, when I go to any website and try to download a page, the screen freezes for between 10-20 seconds while ads load. Why the screen freezes is both frustrating and annoying. I have the latest version, nothing on my computer is different, and as I said, it didn't used to do this. Any ideas what's going on?
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
* https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
* https://support.mozilla.com/en-US/kb/latest-firefox-issues
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
See:
* http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
* https://support.mozilla.com/kb/Mozilla+Crash+Reporter
* https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report -
I was deleting photos when the screen froze and I had to shut down the computer manually. Now after the first minute of being turned on the screen freezes and the mouse arrow goes into that rainbow whirling disc and won't stop no matter how long I let it go. My keyboard is Turkish. My keys are not marked the same as an English one is, further complicating resolving the problem.
The dealer I bought it from doesn't speak English and wants to charge me for repairs. I refuse to pack the computer up and ship it UPS out of town for a repair I can do plus pay for shipping.
When I received my computer I was only given the manual and no system restore discs for situations such as this. I asked where they were and was told there were none.
I suspect this is a tactic to make money on bogus tech repairs off their customers. To purchase new discs, if I can find them, can cost from $30-$40 - the dealer more than likely is re-selling the discs at 100% profit. This is Cizgili Apple Store in Adana, Turkey. I wish to report them. It is a national company too. I don't have a receipt handy, but have an emailed receipt. I can't get my computer's number to get further assistance on the Apple website withput it.
I was a dedicated Windows customer until I started doing desk top publishing. I'm fighting the urge not to regret buying this computer.1-800-676-2775 apple support tech support 1 800 275 2273
If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
click the apple----->click about this Mac ------> click on version----> until you see the serial number. You may have to do this a couple of times if it freezes before you have all the numbers. A camera might help.
Good Luck -
Mac Pro Screen Freezing Issue with NVIDIA 8800 GT too
There were lots of entry in threads, where the screen freezing issue was described (disorted screen with strange lines, only reboot helps). Nearly all cases seem to be related to the ATI 2600 card.
http://discussions.apple.com/thread.jspa?threadID=1358062&tstart=30
http://discussions.apple.com/thread.jspa?threadID=1365277&tstart=0
I opened this new thread to show, that this problems occurs not only for the ATI card but for the NVIDIA 8800 card, too.
My MacPro was delivered 8 days ago and was running without any problems. But all of a sudden, I got that screen freeze. And it wasn't the first time, I was heavely working 2-3 hours with that computer.
In total, 2 screen freezes showed on my computer. The first one during working with the computer. The second one during booting into MacOS X. The screen freeze occured during the boot phase with the grey screen and the spinning wheel.
My configuration:
MacPro 2.8, Dual Quad Core
6 GB RAM
3 harddisks, 1 standard from Apple, 2 Samsung with 750GB
MacOS 10.5.2
Formac 20" Monitor
Perhaps others have this problem, too? Than we should emphasize, that this is not an ATI related problem.I've actually been having the freezing issue for a while now but I didn't have the know-how to troubleshoot it (PC tech trying to support the only Mac lab in the building).
MacPro will freeze randomly (no trend in time, system strain, or open programs). The mouse will operate but will not interact with anything.
Specs:
MacPro - Model 1,1
Dual Core Xeon 2.66
2gb RAM
nVidia GeForce 7300 GT
Mac OS 10.4.11
The machine always has 2 displays connected to it so the workaround that was discussed for the ATI 2600 doesn't apply. I had 1 display connected here in my shop and it froze for that as well.
Message was edited by: DocturKnowles -
My tx is so slow, the web cam is not working, the screen freezes and got color distortions
- My tx is so slow, and heats up very fast... so i think that the advance is not working properly
- the web cam is not working, since the 3th time iused... when i try to use it with my msn... got freezed, then y try ending the process and doesnt work, y have to restart it but it stay just on logging off... and do nothing more... so i have to switch off directly from the power button
- The screen freezes... some thimes the screen got freezed... and got color distortions too... so i have to to switch off again directly from the power button
i was thinking that it was a software problem... but i restore my lap and it doesnt work cuz it still being with the same problems... so lately im thinking that its a hardware problem... i call to technical support from mexico... but they can do nothing for me cuz i bought my lap at circuitcity from el paso... and that store close a few months ago... so i need help before de warrantie expires...
This is the second time that my lap gives me problems, last time I made the change at the store but this time it will be impossible cuz is now closed...
that is why I seek your help...
i will be grateful if you answer in Spanish because my English is not very good...
thankyou so much...If your warranty has not yet run out get it serviced, now! All of the comments seem to indicate that it is the motherboard>
-
Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any
cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears,
and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After
about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling,
so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the
driver wasnt for the system, which was wrong. I made it work somehow, but it was still sluggish. I rolled it back to an earlier driver, and now it works fine. No sluggish performance / slight freeze window thing going on.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change
this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1
Please excuse the small text at the beginning, there isn't an option to un-do that error.You are very wrong about that mystified. What do YOU think made my computer work without beeping at all hu? (I bet you're gonna tell me). I figured it out.
RE-INSTALL WINDOWS 7 OS.
SOLVED.
DOESN'T BEEP ANY MORE.
THAT IS A PART OF microsoft ISN'T IT.
::: EGO KILLER 9000 ::: -
I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it
If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.
-
How can I fix problem of Screen freezing in Fullscreen view display.
Click Vie , Full Screen. Have multiple tabs open. Screen freezes. Prompting does not drop the tabs back down to switch pages etc. Happens randomly, several times a day, since upgrade to Firefix 9. Prior to that I never had an issue with the Full screen feature and used it ALL the time. Please help.I do not want to lose this feature!!!
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver. -
I have only had my mac one month and it seems while I use Skype the screen freezes and I cant click on anything and everything on the right hand side of the screen shifts to the left and the left to the right with a back block down the centre and sometimes lines running down the screen over all. As it is almost brand new should I be going back to store to get this problem fixed??
Yes. You are still under warranty. Why waste it?
-
I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.
Read here.
http://support.apple.com/kb/TS1591 -
Screen freezes, even in safe mode and in BIOS
I’m working on a friend’s laptop: Toshiba, Satellite M65 - S9092
Original problem: The laptop started shutting down after few minutes of use. (Probable overheating)
Took the laptop apart and clean it out. The heatsink, fan and outlets were really plugged up. Put it back together and did a clean re-install, Windows XP. Had few issues with USB drivers not being recognized but worked it out. Ran stress test for a whole day, no problem.
Worked for few days and then USB wasn’t being recognized again and the screen started freezing up. Re-installed os again but it is still freezing up after few minutes, and stays that way till hard shut down.
Screen freezes even in safe mode and in BIOS. (No blue screens)
Switched existing RAM’s around (2 - 512MB), one stick, two sticks, etc…still freezing up. Wanted to upgrade the BIOS but can’t get pass the screen freezing. Not sure if the motherboard may be shot from previous overheating or need new RAM. Don’t want to spend money till I’m sure I’m replacing the right part.
Any assistance is appreciated.Hi there... I have a satellite A70 - S256 an it was freezing up the same way. I downloaded an OS named UBUNTU fron the internet free of charge. once you download it an burn it to cd you can then boot from it after a couple of tries ( due to freezing). When it boots select your language immediately and choose the option to run memory tests (both installed and BIOS) and let it do its thing for as long as it takes. you should boot from UBUNTU on another working pc to get familiar with it if you are not allready so that you make your selection quickly before it freezes. You may have to reboot a few times depending on freezing while the memory test is in progress and how much progress is made. This procedure fixed mines and I never had those problems again.
-
BLACK SCREEN startup with 3 beeps, FREEZES when unplugged, Splash screen freeze, HEAT-UP TO BOOT
BLACK SCREEN startup with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-powe
Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears, and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling, so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B. I ended up changing a setting in BIOS from AHCI to Compatibility Mode, and I passed everything without the BSOD again. I have always had it on AHCI.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
BIOS:
Also, the time was set to 1988 or something in the BIOS.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the driver wasnt made for the system, or that it wasnt compatible or something, which was wrong. I made it work somehow, but it was still sluggish after install. I rolled it back to an earlier driver, and now it works fine oddly. No sluggish performance / slight freeze window thing going on. No problem at all.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1T61-Elwood wrote:
Laptops of all Brands using Nvidia GPUsmade from 2007-2008 are faulty.
You wont get good Nvidia ones on Ebay/forumes anywhere.
I'd beg to differ on both accounts.
*61 series nVidia-based ThinkPads from late January through July of 2008 are a 50/50 shot, since the old chips were mixed with the new ones. Any machine built in August and later can be deemed "safe".
As for the forums (I don't do feebay) there are people who sell genuine, properly-tested planars. However, these do not come at bargain basement prices, and with a good reason if I may add.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
I am trying to add a bookmark in safari ios7, but when I tap the box with the upward arrow no options appear anywhere on screen to add a bookmark. In fact the screen freezes and I have to close safari to be able to unfreeze it. What is wrong, can anyone please help me? Thanks
please ignore this question, I added the ios7.0.2 patch and the bookmarks can now be added through the action icon. cheers
-
When playing music on my ipad the screen freezes and i am not able to view album covers or make any changes i am only able to hear what i selected.
This is the third time it has happened since i updated to the new IOS 5.1. It never happened before.
If i go to Summary and restore the ipad to the factory settings then i'm able to run it as normal.
Is this a glitch in the new software,or a problem with my ipad?
Thanks for any helpThanks Russ H and Ross H!
I'm finding Multicam, combined with Compound Clips to be extrememly efficient.
I started with 2 different video clips, along with 2 different audio clips.
Layed out both clips side by side (visually, they are on top of each other on the timeline),and made that a single compound clip.
Then I laid out both audio clips on top of each other on the timeline and made those a compound clip.
So now I have
2 original individual Video shots
1 compound video shot of the 2 above side by side.
2 original audio tracks
1 compound audio track
Next I made a multicam track, and added to it all 3 video shots (2 original + 1 compound) And I added the compound audio track. I set that audio track to be "the" track.
It's just a little bit of setup, but really not that bad, and the ability to use the multicam feature to switch between shots, while keeping everything in sync is fantastic!
- Jack -
Every time I open Firefox, within several minutes, the screen freezes, and the only way I can make it work is to force quit.
This works for awhile, and then I go through the whole thing
again.c uses the same profile folder as the Windows and Linux platform.
You can locate the Firefox Profile Folder via
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Copy and Paste this code in the Code field in the <i>"Tools > Error Console"</i> and click the <i>Evaluate</i> button to see the location of the profile folder.
<pre><nowiki>alert(Components.classes["@mozilla.org/file/directory_service;1"].getService(Components.interfaces.nsIProperties).get("ProfD", Components.interfaces.nsIFile).path);
</nowiki></pre>
Maybe you are looking for
-
How to sync two iphones to itunes acct
i sync both my iphone 4 to one acct and now both are backedup the same-i want to be able to sync each phone seperatly-how do i do it??????????
-
Has anyone noticed with Snow Leopard that it's very, very clunky about saving documents?? I try to save something in MS Word, and I have to get out of Word, go to my documents folder in finder, then create folders that I want, go back to word and sav
-
Java: How can one check for index out of bound?
simple while loop while (something [ i ] ==k) i+=1; document.write(save [ i ]); Thanks everyone :o) Edited by: bvc on Sep 21, 2007 3:33 PM Edited by: bvc on Sep 21, 2007 3:34 PM Edited by: bvc on Sep 21, 2007 3:34 PM
-
How do I achieve Full peace of mind on a tight Budget?
I am looking to complete an Open Directory Project with managed Network Directories and Networked Home directories. 3TB of available storage should be sufficient (for now). I will be moving users who are use to having their Macs set up as home comput
-
Same Kind Of RAM? (Upgrade Question)
My Intel Core 2 Duo iMac runs with 2 GB of DDR2 SD-RAM. I wanted to buy some more RAM but I was curious about one thing. Is there a difference between DDR2 SDRAM and PC2-5300 RAM or is that all the same thing. Message was edited by: FunkyFreshMac