Screen frozen with Apple logo

iTunes was having issues and needed to shut itself down. The iPod still had the "Do Not Disconnect" screen on, so before unplugging it from my computer, I disconnected it with the Windows USB utility, at which point the screen changed to the Apple logo. Every few seconds the screen flashes blank and then back to the Apple logo, apparently trying to reset itself, but it's stuck.
I've tried holding the Menu and Center button, plugging into a power source, plugging it back into my computer, but it is completely unresponsive....
Suggestions?

If you are on the Apple logo, to fix the problem, disconnect the iPod (if connected), then hold the previous and center buttons. Once you are at the main screen of iPod Diagnostics, click the next or previous buttons (depends on software version) until the arrow is pointing to "Sleep", then click the center button. Click the next/previous buttons until the arrow is pointing to "HIB Test", then click the center button, and then once the screen goes blank click the center button again.. You should be back at the Apple logo. After approx. 10 seconds, it should light up then go to the main menu of the iPod. Hope it works! Good Luck!
Message was edited by: stefran1

Similar Messages

  • Updated to IOS 8 and now power button does not respond and screen is frozen with apple logo.

    Updated iPad to IOS 8 -- screen locked.  Now screen is frozen with apple logo and the power button is not responding.
    Thanks for any help!

    That is normal while it is loading the update. Give it some time(shouldn't be more than 40 minutes). If not, hold the home & sleep/wake button until it is black, and then it restarts.

  • Iphone 3GS Screen frozen at Apple logo

    Tried to reset iPhone, but screen is frozen at Apple logo. Repeated attempts to reset unsuccessful.

    See if you can force the phone into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • IPod mini frozen with Apple logo on screen

    After charging the iPod several nights ago, the Apple logo has remained permanently on the screen until the battery runs down. We have tried all the combinations of resetting it, and occassionally get a flicker of a line on the screen, but the logo always comes back. The only other display is the low battery symbol when we attempt to reset it when the battery is low.
    The iPod is also no longer communicating with the computer as it does not appear in iTunes. We have had a bit of trouble with it over the past 6 months, having had to deal with several other frozen episodes, but it usually comes back to life. Not this time however.
    I have not attempted a full restore yet - is this likely to achieve anything or does it need service (or a good stomping on perhaps?)
    thanks
      Windows XP  

    Before you go to buy a new one, do you want to have a last try?
    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/ipod/download/
    http://www.apple.com/itunes/download/
    In case you need an old versions (window only)
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iPod Updater and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iPod Updater and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2997880
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

  • I was in the middle of updating my iphone 4 (? version 10.1) when an error message appeared. Screen now frozen with apple logo, empty bar below and phone won't turn on or off

    I have a frozen screen (black with the apple logo & an empty bar below) following an error message that appeared during an update of version 10.1 on my iphone 4.
    I am not able to turn off the phone (or on!) Any ideas?

    The iPod Touch kept trying to reboot yesterday but would only show the Apple logo screen then shut off - it finally drained the battery overnight I am guessing. Connected to USB the battery charging icon flashes.
    Took it back to Best Buy, but they wouldn't touch it or replace it since it's under warranty.
    To any potential buyers - beware. My best advice is to look somewhere besides Apple. Every Mac user I know has had to return a Mac, laptop, etc. Really poor quality control, and the retailers agree (Geek Squad told me they have had the same experience with Apple products).

  • Frozen screen - black with apple logo

    my iphone has frozen and when i reset using home and power buttone the apple logo fades and comes back but still will not boot up, when i connect to itunes it appears to show and sync but the screen on the phone stay the same where normally it would light up and show syncing.
    i have tried the restore methods but no joy, as the phones 18 months it out of warranty, and cluse as to how this can be fixed and how much it would cost?

    Having the same problem. In addition, the battery level does funny things. At one point, my battery showed around 50% level. I plugged it in, and the percentage immediately jumped to 70%. Odd.
    If I hold the power button, it will sometimes reset. It doesn't necessarily turn off, but will flash the home screen, go dark, and then when I hit the home button again it shows the home screen.
    The other way that I have found to unfreeze it is to simply plug it in. Fortunately, I'll be ready to upgrade soon...maybe iPhone 5 will be out.

  • TV screen frozen on Apple logo after pressing select button on remote.  Have powered off Apple TV and router.

    TV screen is frozen after pressing select button on remote.  Have powered off both Apple TV and router. Menu does not come up. All that is on TV screen is Apple logo with black screen.

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Ipod Touch frozen with Apple logo & loading bar below!

    My laptop shutdown while my Ipod was updating software. It is frozen with the apple logo & the loading bar below. When I turned my laptop back on, it will not recognize my Ipod. This means I cannot even try restoring it. I have unplugged & plugged back in & tried holding the buttons on the Ipod for 10 seconds. I'm not sure what to do! Help please!

    Try here:
    iPhone and iPod touch: Frozen and unresponsive

  • I phone 4s frozen with apple logo

    My I phone 4s is frozen with the apple logo and nothing else.
    Wont boot up from iTunes or on its own. turns off every now and again but then just shows the apple logo ???

    See this support document when you are unable to restore. If you can't update or restore your iPhone, iPad, or iPod touch
    After that, you would need to identify the operating system you are using on the computer for help to get the device recognized. However, the information in the other support document should help.

  • Phone froze, then i tried to restart and is frozen with apple logo.

    What do i do? The phone froze so i did a hard restart. held the wake/sleep button and home button, then i turned it back on and it doesnt go to anything else but with the load up apple screen. Has been like this for hours and its sitting on the charger. Also turned it off for an hour and still hasnt been resolved. Have had the phone for 13 months. wasnt updated with latest software. Isthe phone a goner or is there something i can do??

    Hold HOME and SLEEP about 10 seconds to reboot the phone.
    If this doesn't work reboot your computer, launch iTunes, find a USB port directly on your computer (not a hub). Plug the USB end of the cable in to the computer. Press and hold the HOME button while connecting the iPhone to the other end. CONTINUE HOLDING until something happens on the phone, then release. This will put the phone into Recovery mode and it should reinstall the firmware.

  • I turn on my labtop BUT is stuck (only loading around and frozen with apple logo )on apple sign page

    i switch on my labtop MacBook Pro (new one ) but is not running it just stuck on first page black and white with circle loading around !???

    Take it to an Apple store or AASP.

  • TS3694 was downloading up on Iph 5 & screen frozen with itunes logo & pic of cord, can't restore online, tried to power down ph, any ideas??

    Does anyone know how I can get my I-phone to reset?

    A lot of forums I've read said to put it into dfu mode or "connect to iTunes" to restore b
    You want it in recovery mode, not DFU, which is used for hacking or on already hacked phones
    What is Difference Between Recovery Mode and DFU Mode
    Error 21 usually means there is hardware damage,
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Please apple fix,
    Who are you talking to?  This is a user-to-user support forum, not Apple.

  • Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
    If not successful, then time for an appointment at the Genius Bar of an Apple store.

  • I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

    I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • HT4061 had new ipad air 5 hours, got message to update ios, started, screen went black with apple logo, over two hours, cannot shutoff device. seems locked, no response.

    new ipad air 5 hours ago. got message ios update available. i started install, screen went black with apple logo, has been "frozen" over two hours with no apparent activity. cannot use Home button or Sleep wake button. how do i restore original ipad start? what is ctl alt delete equivalent?

    Thank u, this reply helped.
    SergZak
    Currently Being Moderated  Re: black screen wont turn on
    Oct 10, 2013 3:44 AM (in response to Apfelwurm)
    The following is how to do a proper reset of an iDevice:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Maybe you are looking for

  • Ipod to TV questions

    Hey for connecting my ipod video to my TV could someone please send me a link to a site with a cord that does work or the official cord from apple beacuse i can not seem to find one Thank you, Connor McCabe

  • Partition of windows 7 with failed bootcamp is nowhere to be found.

    Today I wanted to install windows 7 on my macbook pro early 2011. When bootcamp assistand tries to partition the disk, it froze, and it quit itself. Now the 70gb partition is nowhere to be found.. In disk utility you can't even see that there are two

  • Help! problems upgrading itunes,wont play at all now!

    hi, ive just recently upgraded itunes after a prompt to do so and now i cant play itunes at all.All i get is a message saying itunes has encountered a problem and needs to close.I have tried de-installing and reinstalling,my computer is clean but i j

  • Report - Primary User is name not shown

    Hey there, I've got a problem with the reporting Server functions. When creating a report containing "Primary User Name (Calculated)" there is no data shown within this column. If I add "Is Primary User Calculated?" I get "YES" for every Device name

  • Installing sap 4.6c SR2 on oracle 8.1.7 (Windows 2000)

    Hello fellow workers. I am writing because we are installing SAP 4.6C SR2 on operating system windows 2000 and database oracle 8.1.7 and we are facing some problems with the oracle software. Currently, we are in the oracle software installation stage