Screen - Fuzzy And Blurred

hi
My phone has started behaving funny lately. While using the phone , my phone hangs and the screen goes all fuzzy and blurred.. Then the phone switches off and it cannot be restarted again. I recently upgraded it to the latest iOS 5.1.1 but this did not solve the problem. Is this a hardware problem? My phone is out of warranty!!!

Cayin, welcome to the forum.
When requesting help you should always include the make/full model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Problem: Illustrator CS6 - print PostScript (fuzziness and blurring edges of vector objects)

Hello,
Earlier to print to the printer Develop Ineo+ 451 used the program Illustrator CS3. In connection with the transition to Windows 7 (64bit), was bought by a new version of Illustrator CS6 64bit. Unfortunately, when printing from Illustrator CS6 (price lists, business cards, labels) on a PostScript printer were detected problems, which were not in previous versions of Illustrator CS3.
A comparison of the print quality of the two programs Adobe Illustrator CS3 and Adobe Illustrator CS6, made on a PostScript
The software used on the computers:
1st PC: Windows XP SP2 (32bit), Adobe Illustrator CS3 (32bit), the driver Generic 50C-2SeriesPS v3.0.16.0 (32bit).
2nd PC: Windows 7 SP1 (64bit), Adobe Illustrator CS6 (64bit), the driver Generic 50C-2SeriesPS v3.0.16.0 (64bit).
Printer: Develop Ineo+ 451 (PostScript).
Drivers are available for download on the site www.chansi.ru
link http://download6.konicaminolta.eu/develop/public/&&BDV&RU&sw&&&&&0&&&0&&0&&0
(to choose Product Ineo + 452, for download tested version of the printer driver).
Because after using the new version of the driver, the print quality was not satisfactory, then for the correctness of the comparison experiment, already used driver version 50C-2SeriesPS v3.0.16.0 has been selected.
When you print from the program Adobe Illustrator CS6, a printer PostScript, you can see fuzziness and blurring edges of vector objects, small text becomes fuzzy and difficult to read. If you print from a program Adobe Illustrator CS3 (using the same version of the driver), there are not such problems and the print quality is quite satisfactory.
The settings in the dialog box "Print" of Adobe Illustrator and the print settings in the dialog boxes of the PostScript printer driver of Develop Ineo+ 451, were chosen exactly the same for both versions of the programs Adobe Illustrator CS3 and Adobe Illustrator CS6 on both operating systems!!!
(1) - http://hostingkartinok.com/show-image.php?id=ce3339ac2057e91a77a77b93ba129db2
(2) - http://hostingkartinok.com/show-image.php?id=0be6ec6a3e9d214b107525aedc59b7cb
P.s. Sorry for my English, use http://translate.google.ru/ and the help of friends

What's the explanation for the following sequence?
1. Paste as Smart Object, at moment after pasting and before clicking the commit icon (no transform was made) in options bar. The object is rendered pixel-perfect.
2. After the commit. The object is poorly rendered with gray pixels which should be white.
3. Press Cmd+T for transform mode. The object is rendered pixel-perfect again.
4. After canceling transform mode, the object is poorly rendered again.

Screen fuzzy and purple tinged

i turned on my laptop last night and the display is fuzzy and purple tinged all over .... the computer is just over 1 year old so no longer under warrenty.
i am to start a new job in the new year and need to use this laptop - hoping someone is able to help ... i just don't know where to start
ibook Mac OS X (10.3.9)

The same problem, i have my iBook one year two days and the LCD display change colors and sometimes flash it and goes very white. The video card is ok i make the hardware test and no problems appears, i plugin anothers displays like a CRT, LCD and the TV and the colors and brightness are OK.
Sorry, my english is bad. Please I need Help from Apple in Chile the Support is not so good.
Thanks

Camera screen fuzzy and not taking pictures

My camera will not take pictures and will just show a fuzzy screen. Sometimes it flips to take a front photo and then locks up. Any ideas?

First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
If this does not help, set it up as new device, explained here:
How to erase your iOS device and then set it up as a new device or restore it from backups
If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support

Blurred, fuzzy and faded picture on screen of Compac Presario CQ5000 desktop series.

Blurred, fuzzy and faded picture on screen of Compac Presario CQ5000 desktop series.
Computer has done this before when there was a power surge but fixed itself. Stuck on blurred picture now.
Problem in picture only it seems. I can see all programs are still working. How can I fix this or can it be fixed?

Cayin, welcome to the forum.
When requesting help you should always include the make/full model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Hi I have a MacBook Pro 2011 i7 and it stays on for about 4 hours then the screen go's fuzzy and I have to turn it off by the power button has anyone had this problem thanks mike

I Have a MacBook Pro i7 2011 it stays on for about 4 hours then the screen go's all fuzzy and I have to turn it off by the power button has any body else had this problem thanks mike

My guess would also be a failling connection between your logicboard and your GPU. See 2011 MacBook Pro and Discrete Graphics Card
For most users it starts with some random crashes and freezes like you describe it. And then it just gets worse and worse. There are still no "good" solutions, sadly. This is a hardware problem from the production.

Full screen preview and slideshow are blurry / fuzzy

Hi folks-
I just upgraded from CS2 to CS4, in part to improve efficiency of selecting photos - I wanted the zoom and loupe features. Unfortunately a very basic function has been compromised and I'm hoping there's a solution: In both full-screen preview and slideshow the full-screen image is notably blurry. This is a problem for two reasons: 1. I can't judge pictures accurately by just flipping through them in full-screen mode (without zooming to 100% to see if they are well-focused). 2. I can't use Slideshow for, well, slideshows. I've had to resort to keeping another app (like Windows Picture Viewer) open just to be able to quickly flip through and evaluate images full-screen or to show slideshows.
I've tried setting all the options related to image quality (they mostly have to do with caching thumbnails and speeding 100% viewing); I've tried purging the cache files. Nothing helps.
Any ideas? Thanks!

It seems to me that there is something wrong with it.
I am trying Bridge CS4 as a viewer for my JPEG files.
I also noticed that the previews were fuzzy. I activated the high-quality previews as well as the option to generate the previews at screen size.
Here's what I noticed. I went to check out a specific photo that is quite sharp with a number of straight lines, angles, details, where it's very easy to detect a lack of sharpness. That photo immediately looked fuzzy to me, which didn't jive with my memory of it. I quickly opened it in other viewers, which displayed it as intended with all the expected sharpness.
So, I went through the settings to see where the problem could be and I immediately thought of checking the box to get software previews instead of hardware, restarted the app, purged the cache, tried again. There my photo had recovered its sharpness, or at least most of it. I thought I found the culprit, but not quite.
I went to browse other photos and found one in particular with a lot of fine detail (hair) and that photo also didn't display all the sharpness that it should have (I was still using software mode). The difference was very slight and to make sure of it it required A/B comparison between Bridge and PS, but there was a difference.
Now I tried the opposite. I went back to hardware rendering mode, restarted, purged the cache, tried again. That second photo looked alright in preview, but the previous photo looked fuzzy again.
So, it doesn't work the same way for each photo...
What's the main difference between the first photo, obviously fuzzy in hardware mode, and the second one, alright in hardware mode but slightly fuzzier in software? The ratio. The first one is a vertical photo, the second one is horizontal (close to square).
I quickly checked other vertical photos and they showed the same behavior...
Now staying in hardware mode, I noticed something else. When I preview the vertical photo and click on it, or double click, it quickly jumps, switching between 2 versions of the photo: the one displayed originally (fuzzy) and another one, with a very slightly different size, which is sharp. During that manipulation it also briefly displays "100%" at the top of the screen. It doesn't stick when you click and immediately switches back, so it looks like a glitch.
Now in software mode, I tried the same, this time you can click once on the photo (which is originally displayed *almost* sharp). When you click once, it displays "100%" but also displays a very slightly smaller version that is clearly fuzzy. Clicking again goes back to the other, less fuzzy one, but doesn't display "100%" this time.
Doing the same test on horizontal photos shows no change that I can see.
So, it seems to me that in the preview mode, Bridge has trouble displaying some photos (vertical ones?) in their actual resolution (100%)
and since there is a slight resizing going on, it brings fuzziness. This doesn't explain the very slight fuzziness seen on horizontal photos in software mode.
Now I'll mention, for those still awake, that I saw no fuzziness on the same vertical photos when I go to Review Mode with *hardware* rendering. Photos there are sharp. Now if I go to the review mode with software rendering enabled, vertical photos are not 100% sharp (akin to the small difference I mentioned earlier while in software mode), while they are sharper in preview.
To sum up, it seems that the only configuration that gives me consistently 100% sharp (=as they were meant to be after post-processing) photos no matter what their orientation, is when I stay in hardware rendering mode and use the Review Mode, instead of preview.
This all really smells like a bug.
For info, I am using Windows 7 and an ATI HD4850 card, and this only about processed JPEG files, not RAW files.
Perhaps the preview is really meant as a quick preview and not a tool to view final photos at 100% accuracy...

My iPad has not been dropped or damaged at all. The screen is grey fuzzy and has coloured lines down the middle. iPad 3 also.

My iPad has not been dropped or damaged at all. The screen is grey fuzzy and has coloured lines down the middle. iPad 3 also.

Basics from the manual are restart, reset, restore.
Try all of these.
If these fail, then:
iOS: Unable to update or restore

My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard). I have no idea what settings have changed or what to check. Any ideas?!

My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard). I have no idea what settings have changed or what to check. Any ideas?!

It could be a number of keyboard shortcuts, here's a few.
If the screen is zoomed, hold CNTL and scroll down with mouse or trackpad.
If screen looks like a negative, hold down CNTL OPT CMD and click 8.
Let us know how what other symptoms are shown.
Regards,
Captfred

So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer

So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

My screen is distorted blurred and some weird funky colors what is wrong and how can I fix it

My screen is distorted, blurred and some funky weird colors very hard to read. What is wrong and can it be fixed

Try Settings>General>Accessibility>Invert Colors>Off.
Or, reset your iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Today my screen went all fuzzy and everything is a different shade of red, blue, etc and the images are distored. Please tell me how to resolve this major problem????

My screen is fuzzy and images are distorted. How can I resolve this problem?

If the Reset/Reboot doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

I have an iphone 5c, and for some reason the lock screen picture is blurred. how can i fix that?

i have an iphone 5c, for some reason the lock screen picture is blurred. How can i fix that?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first..
More Info Here > http://support.apple.com/manuals/#iphone

Help! Screen going fuzzy and white

The past few weeks my screen has been going fuzzy and white. It comes and goes. What s this and what is the easiest solution?

Sounds like a connection is loose. First check here:
http://www.youtube.com/watch?v=cqxuQQ9ERS0
http://www.powerbookmedic.com/free-ipod-manual/ipodvideomanual.pdf/
Get free advice by sending them an email and asking what kind of malady you have. Since your iPod basically works, a loose connection is likely.

HT201412 I am reading an e-book and the screen has become blurred to the point that you cannot even see the letter. I checked the e-book in another computer and can be seen without problems. What's worst, when this happens all the web sites have the same

I am reading an e-book and the screen has become blurred to the point I cannot see the letters. Other pages are patched grey. I checked the ebook in another computer and it shows no problem. Also, when this happens, other web sites get blurred or patched. Do you know what can it be?

You can try giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. See if that helps.
But if it doens't or if hte issue repeats you may want to make an appointment at your local apple store and have them check it out.

Screen - Fuzzy And Blurred

Similar Messages

Maybe you are looking for